The polymerization using a high‐yielding addition reaction between electron‐rich alkynes and 7,7,8,8‐tetracyanoquinodimethane (TCNQ) derivatives is described. The bifunctional monomer containing two TCNQ moieties and the counter comonomer bearing two dialkylaniline (DAA)‐substituted alkynes are reacted in 1,2‐dichloroethane under mild heating conditions. At the high monomer concentrations, high molecular weight linear polymers are obtained, while the reaction at the low monomer concentrations produces a significant amount of the cyclic compounds. A clear relationship between the monomer concentration and the cyclic compound amount is demonstrated. The obtained polymers feature a sufficient thermal stability with the decomposition temperature exceeding 300 °C as well as strong charge‐transfer (CT) bands and redox activities ascribed to the produced donor–acceptor moieties. These features are also used to optimize the polymerization conditions and to estimate the chemical structures.
A fast method is presented for the calculation of the MSD and the MWD of polymers obtained via step‐growth polymerization of polyfunctional monomers bearing identical reactive groups (i.e., systems of type “Afi”). Using this method, the complete distribution can be calculated rapidly, not just the statistical averages of the polymer population such as or . The computed MSD and MWD give more insight than these averages and can be compared to similar data measured on actual polymer systems. The low‐ and intermediate molecular size/weight part of the distribution curves are calculated using a recurrence scheme, while the high‐molecular tail (large and very large polymers) of the distributions is derived from an asymptotic approximation of the associated generating functions.
Grafted conjugated polyelectrolytes were synthesized for the first time and characterized. The polymers demonstrated properties of a convenient and efficient protocol for creating Hg2+ sensors. The unique character of the new material comes from an anionic counterion nature with no external cofactors, and imparts high selectivity and fast detection for mercury ion in a fluorescence probe. The concept may be potentially applied to create new sensors for monitoring other ions.
Functional three‐dimensional (3D) micropatterns of diacetylene supramolecules embedded in a host polymer have been successfully fabricated by a replica‐molding (REM) technique. Dimensional reduction as a result of liquid evaporation during the curing process does not affect the conformational features of the transferred patterns. Polymerization of the diacetylene vesicles using 254 nm UV‐light irradiation from the back‐side of the transparent substrate induces blue colored polydiacetylene (PDA) micro‐images. Interestingly, the polymerization selectively occurs in the molded areas because of the sub‐300 nm light blocking property of SU‐8. 3D fluorescence patterns are readily obtained by heat treatment of the blue images on the film.
Polyaniline nanostructures (nanosheets, nanofibers, and nanoparticles) can be assembled at the organic/aqueous interface or in solution by controlling the diffusion rate and the polymerization induction time of aniline. The quality of polyaniline nanostructures is determined by the polymerization solution conditions. Polyaniline nanosheets formation mechanism was proposed. Under certain polymerization conditions, polyaniline nanofibers or/and nanoparticles were obtained.
Microporous films consisting of two‐dimensionally ordered void structures ‐ so‐called honeycomb films ‐ were produced by evaporation of polymer solutions under high humidity. Two types of poly(vinyl cinnamate)s were used: A newly synthesized amphiphilic poly(vinyl cinnamate) and a mixture of a commercial poly(vinyl cinnamate) and an amphiphilic polyion complex. Photo‐crosslinking of the honeycomb structure could be achieved by UV irradiation while completely retaining the film morphology. The crosslinked films showed excellent stability against organic solvents.
This study reports a continuous prepartion of spherical or hemispherical polymer particles simply utilizing the phase separation in polymer blend films during the coating process. We took an advantage of the strong phase separation between a water‐soluble crystalline polymer as a matrix and hydrophobic polymers as minor components. We demonstrated the prepartion of water‐soluble polystyrene (PS) particles, nitrilotriacetic acid (NTA)‐functionalized PS particles for protein separation, and semiconducting poly(3‐hexylthiophene) (P3HT) particles. The sizes of the particles could be controlled by adjusting the film thickness and weight fraction of the minor component polymers in the blend film. It provides a simple facile way to prepare polymer particles in a continous process.
A nickel α‐diimine catalyst was used for Grignard metathesis (GRIM) polymerization of 2,5‐dibromo 3‐hexylthiophene and 2‐bromo‐5‐iodo‐3‐hexylthiophene monomers. GRIM polymerization of 2‐bromo‐5‐iodo‐3‐hexylthiophene generated regioregular polymers with molecular weights ranging from 3 000 to 12 000 g · mol−1. The nickel α‐diimine catalyst was also successfully used for the GRIM polymerization of a bulky benzodithiophene monomer.
A series of π‐conjugated polymers linked by benzocarborane (1,2‐(buta‐1′,3′‐diene‐1′,4′‐diyl)‐1,2‐dicarbadodecaborane) were synthesized via Sonogashira–Hagihara polycondensation reaction. The opened molecular structure of diiodo monomer containing benzocarborane resulted in fast polymerization and high molecular weights. The obtained polymers were fully characterized by 1H, 13C, and 11B NMR spectroscopies. UV‐vis absorption and photoluminescence studies revealed the acceptor‐profile of benzocarborane. Unlike the polymers linked by o‐carborane, these polymers exhibited strong luminescence in the solution state, presumably because the inductive effect of carborane is dominant, rather than cage‐π interactions.
The layer‐by‐layer (LBL) assembly of poly(diallyldimethylammonium chloride) and poly(sodium styrene sulfonate) on poly(sulfo propyl methacrylate) brushes resulted in films with nanometer‐ and micrometer‐sized holes and ledges, observed by atomic force microscopy and scanning electron microscopy. Polyelectrolyte assembly was followed by the quartz microbalance technique. The formation of ledges and holes is explained by the interaction of the brush polymers with the incoming polyelectrolytes during the LBL assembly, inducing a spatially localized and self‐organized accumulation of the assembled polymers.
A class of cationic bottle‐brush polymers that show ionic strength‐dependent stimuli responsiveness is prepared. Brush polymers with norbornene as backbone and quaternary ammonium (QA)‐containing polycaprolactone copolymers as side chains are synthesized by a combination of ring‐opening metathesis polymerization, ring‐opening polymerization, and click reaction. In water with low ionic strength, brush polymers are soluble due to the strong electrostatic repulsion between cationic QA groups. As the addition of salt to increase ionic strength, single brush polymers undergo a transition from extended conformation to collapsed state and finally become insoluble in solution due to the screening effect of salts that yield the once‐dominant electrostatic interactions among QA species to hydrophobic–hydrophobic interactions.
A series of new conjugated copolymers incorporating the redox‐active pyrrolo‐TTF unit has been synthesised. The properties of the polymers have been investigated by cyclic voltammetry and electronic absorption spectroscopy, revealing that the pyrrolo‐TTF behaves very differently to its thieno‐TTF variant. In comparison to thieno analogues, the band gaps of the new polymers are wider than expected due to a decrease in the polarizability of the heteratom (nitrogen vs. sulfur) and steric interactions between repeat units. Whilst the pyrrolo‐TTF units are stronger electron donors than thieno‐TTFs in related structures, the two redox active elements of the new polymers (TTF and conjugated chain) function independently under oxidative conditions.
Atomistic MD simulations of water in the vicinity of oxidized amorphous atactic polystyrene are presented. The changes in the orientational and translational dynamics of water near polymer surfaces with different hydrophilicity are studied. Two main orientational relaxation processes of water molecules are distinguished: a process on a fs timescale, associated with the ballistic motion of water molecules, and a process on a ps timescale, associated with the self‐diffusion of water. The fast process is not affected by the presence of the polymeric surface. The second relaxation process differs at the interface from that in the bulk in that the dynamics of water molecules is more heterogeneous in the first. The effect of the representation of polystyrene films on the water dynamics is discussed.
Poly(L ‐lactide)/layered aluminosilicate nanocomposites were synthesized in bulk by ring‐opening polymerization in the presence of two organo‐modified montmorillonites. When the organo‐modifier consisted of an ammonium cation bearing primary hydroxyl groups, polymerization was initiated by the alcohol functions after adequate activation. The growing polymer chains were directly “grafted” onto the clay surface through the hydroxyl‐functionalized ammonium cations yielding exfoliated nanocomposites with enhanced thermal stability.
TEM image of a fully exfoliated Cloisite®30B‐based nanocomposite, showing delamination of the silicate layers. 相似文献
A new chromophore, C1 , based on a similar DπA‐structure as in the FTC ‐chromophore but with a hydroxyalkyl spacer perpendicular to the direction of the dipole moment was synthesized. Both chromophores and the CLD ‐chromophore were used to prepare high Tg nonlinear optical vinyl polymers. The influence of the position of the spacer on the DπA‐system on the NLO response of the resulting polymers was investigated.
The effect of the molar volume on the mechanical properties of three polymers is computed using molecular mechanics. It is demonstrated that elastic properties significantly depend on the molar volume. To be reproducible they must be determined for a series of “stable” glassy configurations for which the potential energy is minimized not only according to the coordinates but also to the molar volume. If these conditions are not fulfilled, a great disparity in values between experiment and simulation is observed. The procedure is first applied to PVC. It is then argued that coherent results stemming from the application of this approach to both tacticities of PMMA justifies its application toward other polymers.
The present features review article discusses the crystallisation of the polymer matrix when containing silicate layers. The accent is put on nylons (polyamides) and poly(ethylene oxide) as typical hydrophilic polymers and, poly(propylene) from the hydrophobic group. The effects of the clay, either intercalated or exfoliated, on the crystallisation behaviour of the matrix are highlighted. In addition, the crucial aspects of the semicrystalline morphology of the matrix in the presence of the clay platelets are also debated. The overall crystallisation rate is reported to slow down for most of the crystallisable polymer matrices on account of a retarding growth effect exerted by the clay platelets. As far as the location of the exfoliated clay platelets in the polymer matrix is concerned, they are assumed to be rejected from the crystalline phase in the interspherulitic space.
Summary: From kinetic theory we have rigorously derived singularity‐free Brownian dynamics analyses of nanoparticle rotational dynamics. The rigid non‐spherical nanoparticles incorporate all three rotational degrees of freedom. This was achieved by using the components of Cartesian rotation vectors as the generalized coordinates describing angular orientation. The new results constitute an important advance compared to the situation when Eulerian angles specify angular orientation. Our finding eliminates one of the main longstanding obstacles to detailed studies of nanoparticle rotational dynamics in the diffusion time domain. The described formalism is applicable to a wide range of nanoparticle systems including liquid crystals, biopolymers, and colloids.
Novel poly(ethylene glycol) (PEG) derivatives having both carboxylic acid, and sugar side chains were synthesized. These polymers were used to coat DNA/poly(ethyleneimine) complexes, and effectively protected them against albumin-induced aggregation. They presented carbohydrate moieties on the DNA complex surfaces as a cell-binding ligand, and the galactose-bearing polymer remarkably enhanced the poly(ethyleneimine)-mediated gene transfection on HepG2 cells.
Synthesis of poly(ethylene glycol) derivatives having both carboxylic acid and sugar pendant groups. 相似文献
