Dithieno[3,2‐b:2′,3′‐d]pyrrole Cored p‐Type Semiconductors Enabling 20 % Efficiency Dopant‐Free Perovskite Solar Cells

Organic p‐type semiconductors with tunable structures offer great opportunities for hybrid perovskite solar cells (PVSCs). We report herein two dithieno[3,2‐b:2′,3′‐d]pyrrole (DTP) cored molecular semiconductors prepared through π‐conjugation extension and an N‐alkylation strategy. The as‐prepared conjugated molecules exhibit a highest occupied molecular orbital (HOMO) level of ?4.82 eV and a hole mobility up to 2.16×10^?4 cm² V^?1 s^?1. Together with excellent film‐forming and over 99 % photoluminescence quenching efficiency on perovskite, the DTP based semiconductors work efficiently as hole‐transporting materials (HTMs) for n‐i‐p structured PVSCs. Their dopant‐free MA_0.7FA_0.3PbI_2.85Br_0.15 devices exhibit a power conversion efficiency over 20 %, representing one of the highest values for un‐doped molecular HTMs based PVSCs. This work demonstrates the great potential of using a DTP core in designing efficient semiconductors for dopant‐free PVSCs.     

Synthesis and photovoltaic investigation of dithieno[2,3‐d:2′,3′‐d′]‐benzo[1,2‐b:3,4‐b′:5,6‐d″]trithiophene‐based conjugated polymer with an enlarged π‐conjugated system

Compared with benzo[1,2‐b:3,4‐b′:5,6‐d″]trithiophene (BTT), an extended π‐conjugation fused ring derivative, dithieno[2,3‐d:2′,3′‐d′]benzo[1,2‐b:3,4‐b′:5,6‐d″]trithiophene (DTBTT) has been designed and synthesized successfully. For investigating the effect of extending conjugation, two wide‐bandgap (WBG) benzo[1,2‐b:4,5‐b′]dithiophene (BDT)‐based conjugated polymers (CPs), PBDT‐DTBTT, and PBDT‐BTT, which were coupled between alkylthienyl‐substituted benzo[1,2‐b:4,5‐b′]dithiophene bistin (BDT‐TSn) and the weaker electron‐deficient dibromides DTBTTBr₂ and BTTBr₂ bearing alkylacyl group, were prepared. The comparison result revealed that the extending of conjugated length and enlarging of conjugated planarity in DTBTT unit endowed the polymer with a wider and stronger absorption, more ordered molecular structure, more planar and larger molecular configuration, and thus higher hole mobility in spite of raised highest occupied molecular orbital (HOMO) energy level. The best photovoltaic devices exhibited that PBDT‐DTBTT/PC₇₁BM showed the power conversion efficiency (PCE) of 2.73% with an open‐circuit voltage (V_OC) of 0.82 V, short‐circuit current density (J_SC) of 6.29 mA cm^?2, and fill factor (FF) of 52.45%, whereas control PBDT‐BTT/PC₇₁BM exhibited a PCE of 1.98% under the same experimental conditions. The 38% enhanced PCE was mainly benefited from improved absorption, and enhanced hole mobility after the conjugated system was extended from BTT to DTBTT. Therefore, our results demonstrated that extending the π‐conjugated system of donor polymer backbone was an effective strategy of tuning optical electronic property and promoting the photovoltaic property in design of WBG donor materials.     

Three‐Component One‐Pot Synthesis of Indeno[2′,1′:5,6]Pyrido[2,3‐d]Pyrazole Derivatives in Aqueous Media

A series of indeno[2′,1′:5,6]pyrido[2,3‐d]pyrazoles was synthesized by the three‐component reaction of aldehyde, 5‐amino‐3‐methyl‐1‐phenylpyrazole and 1,3‐indenedione in the presence of SDS in aqueous media. The structures were characterized by IR, ¹H NMR, high resolution mass spectra and were further confirmed by X‐ray diffraction analysis.     

Molecular Tuning in Diaryl-Capped Pyrrolo[2,3-d:5,4-d′]bisthiazoles: Effects of Terminal Aryl Unit and Comparison to Dithieno[3,2-b:2′,3′-d]pyrrole Analogues

A series of six conjugated oligomers consisting of a central pyrrolo[2,3-d:5,4-d′]bisthiazole (PBTz) end-capped with either thienyl, furyl, or phenyl groups have been prepared from N-alkyl-and N-aryl-pyrrolo[2,3-d:5,4-d′]bisthiazoles via Stille and Negishi cross-coupling. The full oligomeric series was thoroughly investigated via photophysical and electrochemical studies, in parallel with density functional theory (DFT) calculations, in order to correlate the cumulative effects of both aryl end-groups and N-functionalization on the resulting optical and electronic properties. Through comparison with the analogous dithieno[3,2-b:2′,3′-d]pyrrole (DTP) materials, the effect of replacing DTP with PBTz on the material HOMO energy and visible light absorption is quantified.     

Synthesis and Properties of N,N′‐Bis(difuroxano [3,4‐b:3′,4′‐d]phenyl)oxalic Amide

N,N′‐Bis(difuroxano[3,4‐b:3′,4′‐d]phenyl)oxalic amide was synthesized via acylation, nitration, azidation, and pyrolysis‐denitrogenation from the starting materials of oxalyl chloride and 3,5‐dichloroaniline, under mild reaction conditions, with the yields of 81.0%, 82.0%, 86.0% and 81.7% respectively. The title compound and its precursors were characterized by ¹H NMR, IR, MS, and elemental analysis. The title compound has a density of 1.92 g·cm^?3 by a suspension method, a standard formation enthalpy of 979 kJ·mol^?1 calculated by Gaussian programs, a detonation velocity of 8.17 km·s^?1, and a detonation pressure of 31 GPa obtained by Kamlet Equation. The thermal decomposition reactions of the title compound at different heating rates were tested by differential scanning calorimetry (DSC). The kinetics parameters of the pyrolysis of the compound were calculated by Kissinger's method. The values of apparent activation energy (E_a) and pre‐exponential constant (A) were 226.7 kJ·mol^?1 and 10^23.17 s^?1 respectively. It was presupposed that N,N′‐bis(difuroxano[3,4‐b:3′,4′‐d]phenyl)oxalic amide would be a promising high energetic explosive with low sensitivity.     

One‐pot Sequential Reactions Featuring a Copper‐catalyzed Amination Leading to Pyrido[2′,1′:2,3]imidazo[4,5‐c]quinolines and Dihydropyrido[2′,1′:2,3]imidazo[4,5‐c]quinolines

Tetracyclic skeletons combining an imidazo[1,2‐a]pyridine moiety with a quinoline framework such as pyrido[2′,1′:2,3]imidazo[4,5‐b]quinoline are stimulating increasing interests since they are close isosteres of a series of powerful antiproliferative compounds. In this paper, we report a novel methodology for the synthesis of pyrido[2′,1′:2,3]imidazo[4,5‐c]quinolines through one‐pot sequential reactions of commercially available or readily obtainable 2‐aminopyridines, 2‐bromophenacyl bromides, aqueous ammonia, and aldehydes. Moreover, dihydropyrido[2′,1′:2,3]imidazo[4,5‐c]quinolines could also be obtained in a similar manner by using various ketones as the substrates in place of aldehydes. Notably, the whole procedure combines condensation/amination/cyclization reactions in one pot to give complex compounds in a simple and practical manner. Compared with literature methods, the synthetic strategy reported herein has the advantages of readily available starting materials, structural diversity of products, good functional group tolerance, and obviation of step‐by‐step operations.     

Synthesis of Certain 3-Aminopyrazolo[5,4-b]pyridine and 3,4-Substituted Pyrido[2′,3′：3,4]pyrazolo[5,1-c][1,2,4]triazine Derivatives

2-Thioxo-1,2-dihydropyridine derivatives 2a, 2b were reacted with methyl iodide to give 2-methylthiopyridines 3a, 3b, which were reacted with hydrazine hydrate to produce 3-aminopyrazolo[5,4-b]pyridines 4a, 4b. Compounds 4a, 4b were diazotized to afford the corresponding diazonium salts 5a, 5b, which were reacted with some active methylene compounds 6a-6h to give the corresponding pyrido[2′,3′ ： 3,4]pyrazole[5,1-c][1,2,4]triazines 7-14.     

Synthesis,Characterization and Reactions of 4‐Hydrazino‐2‐methylpyrimidino[4′5′:4,5]thiazolo[3,2‐a]benzimidazole

4‐Hydrazino‐2‐methylpyrimidino[4′,5′:4,5]thiazolo[3,2‐a]benzimidazole ( 4 ) was obtained from hydrazinolysis of the 4‐chloro derivative 3 with hydrazine hydrate. The hydrazino derivative 4 was further cyclized to the corresponding pyrazole 5 , pyrazolone 6 and 5‐methyl‐1,2,4‐triazolo[1″,5″:3′,4′]pyrimidino[5′,6′:5,4]‐thiazolo[3,2‐a]benzimidazole ( 9 ) and 5‐methy‐1,2,4‐triazolo[4″,3″:3′,4′]pyrimidino[5′,6′:5,4]thiazolo‐[3,2‐a]benzimidazole ( 10 ), respectively. The triazolo derivative 10 was isomerized to the triazolo derivative 9 under a variety of reaction conditions.     

An Air‐Stable Semiconducting Polymer Containing Dithieno[3,2‐b:2′,3′‐d]arsole

Arsole‐containing conjugated polymers are a practically unexplored class of materials despite the high interest in their phosphole analogues. Herein we report the synthesis of the first dithieno[3,2‐b;2′,3′‐d]arsole derivative, and demonstrate that it is stable to ambient oxidation in its +3 oxidation state. A soluble copolymer is obtained by a palladium‐catalyzed Stille polymerization and demonstrated to be a p‐type semiconductor with promising hole mobility, which was evaluated by field‐effect transistor measurements.     

Ionic Liquid as an Efficient Promoting Medium for Synthesis of Bis‐Pyrazolo[3,4‐b:4′,3′‐e]Pyridines

The preparation of a series of bis‐pyrazolo[3,4‐b:4′,3′‐e]pyridines by the reaction of 5‐aminopyrazole with aldehydes in ionic liquid [bmim]Br is described. This new method has the advantages of easier work‐up, milder reaction conditions, high yields and environmental friendliness compared with other methods.     

A Novel,One‐Pot Four‐Component Route to 2′‐Thioxo‐2′,3′‐dihydrospiro[indole‐3,6′‐[1,3]thiazin]‐2‐one Derivatives

An efficient route to 2′,3′‐dihydro‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives is described. It involves the reaction of isatine, 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one, and different amines in the presence of CS₂ in dry MeOH at reflux (Scheme 1). The alkyl carbamodithioate, which results from the addition of the amine to CS₂, is added to the α,β‐unsaturated ketone, resulting from the reaction between 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one and isatine, to produce the 3′‐alkyl‐2′,3′‐dihydro‐4′‐phenyl‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives in excellent yields (Scheme 2). Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses.     

Studies with Polyfunctionally Substituted Heterocycles: New Synthesis of Pyrido[5′, 4′:2,3][1,3,4]oxadiazolo[3,2-a]pyridine; Pyridazine; 1,3,4-Oxadiazote; and Pyrazolo[1,5-a]Pyrimidine Derivatives

Cyanoacetohydrazide 1a reacts with 2-arylhydrazoketons 2a,b and 3a,b in refluxing ethanol to yield pyrido[5′,4′:2,3][1,3,4]oxadiazolo[3,2-a]pyridine and pyridazine derivatives; in the absence of solvent pyrazolo[1,5-a]pyrimidine derivatives were obtained. The reaction of 2a,b and 3a,b will) benzoylhydrazine afforded 1,3,4-oxadiazole and pyrazole derivatives.     

An Alternating Copolymer Derived from Indolo[3,2‐b]carbazole and 4,7‐Di(thieno[3,2‐b]thien‐2‐yl)‐2,1,3‐benzothiadiazole for Photovoltaic Cells

An alternating narrow bandgap conjugated copolymer (PICZ‐DTBT, E_g = 1.83 eV) derived from 5,11‐di(9‐heptadecanyl)indolo[3,2‐b]carbazole and 4,7‐di(thieno[3,2‐b]thien‐2‐yl)‐2,1,3‐benzothiadiazole (DTBT), was prepared by the palladium‐catalyzed Suzuki coupling reaction. The resultant polymer absorbs light from 350–690 nm, exhibits two absorbance peaks at around 420 and 570 nm and has good solution processibility and thermal stability. The highest occupied molecular orbital (HOMO) energy level and lowest unoccupied molecular orbital (LUMO) level of the copolymer determined by cyclic voltammetry were about −5.18 and −3.35 eV, respectively. Prototype bulk heterojunction photovoltaic cells from solid‐state composite films based on PICZ‐DTBT and [6,6]‐phenyl‐C₇₁ butyric acid methyl ester (PC₇₁BM), show power conversion efficiencies up to 2.4% under 80 mW · cm⁻² illumination (AM1.5) with an open‐circuit voltage of V_oc = 0.75 V, a short current density of J_sc = 6.02 mA · cm⁻², and a fill factor of 42%. This indicates that the copolymer PICZ‐DTBT is a viable electron donor material for polymeric solar cells.

     

Synthesis of new optically active α,α′,β‐trisubstituted‐β‐lactones as monomers for stereoregular biopolyesters

Various optically active (4R)‐alkyloxycarbonyl‐3,3‐dialkyl‐2‐oxetanones as monomers were synthesized from L‐(S)‐malic acid in six steps to prepare a new family of stereopolyesters for biomedical applications. The synthesis began with an esterification followed of a dialkylation in the aim to introduce hydrophobic groups as methyl or reactive group as allyl. Then, a saponification has permitted to obtain the corresponding diacids that reacted with appropriate alcohols to furnish different monoesters. The last and most important step was activation of hydroxyl group of monoesters with the asymmetric carbon configuration inversion according to the Mitsunobu reaction. Thus, this reaction has provided lactones from monoesters with 100% enantiomeric excess which was confirmed by ¹H NMR and by the synthesis of corresponding isotactic and semicrystalline homopolyesters. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2586–2597     

γ‐Fe2O3@Cu3Al‐LDH‐TUD as a new Amphoteric,Highly Efficient and Recyclable Heterogeneous Catalyst for the Solvent‐free Synthesis of Dihydropyrano[3,2‐c]pyrazoles and dihydropyrano[3,2‐c]chromens

Thiourea dioxide was immobilized on γ‐Fe₂O₃@Cu₃Al‐LDH magnetic nanoparticles to prepare the γ‐Fe₂O₃@Cu₃Al‐LDH‐TUD MNPs. The structure and properties of these magnetic nanoparticles were established by FT‐IR, EDX, SEM, XRD, and hystogram of particle size analytical methods. The results obtained from these analytical methods confirmed the successful immobilization of the thiourea dioxide onto the magnetic support. The synthesized magnetic nanoparticles (MNPs) exhibited high catalytic activity in one‐pot three‐component reactions under mild and solvent‐free conditions for the synthesis of diverse ranges of dihydropyrano[3,2‐c]pyrazoles and dihydropyrano[3,2‐c]chromens. All the reactions proceeded smoothly to furnish the respective products in excellent yields. Simple isolation of the products, avoidance of harmful organic solvents, versatility of the catalyst and its easy magnetic separation and reusability with no significant loss of activity are the main advantages of the present method.     

Synthesis and Chain‐Length Dependence of the Electronic Properties of π‐Conjugated Dithieno[3,2‐b:2′,3′‐d]pyrrole (DTP) Oligomers

N‐(2‐ethylhexyl)dithieno[3,2‐b:2′,3′‐d]pyrrole has been prepared and its dimer and trimer have been synthesized by Stille coupling. The electrochemical and optical properties of these compounds have been investigated by cyclic voltammetry, UV–Vis, and fluorescence emission spectroscopies. The obtained results show that these strongly luminescent compounds can be oxidized into stable cation radical and dication state. The analysis of the chain length dependence of the electronic properties indicates that the predicted bandgap of an ideal polymer chain should be considerably smaller than the experimental results reported until now. This difference is discussed in terms of reactivity of the dithieno[3,2‐b:2′,3′‐d]pyrrole (DTP) unit.

     

Nucleosides 4: Synthesis of 2′,3′-Didehydro-2′,3′-dideoxydoridosine and 2′,3′-Dideoxydoridosine as Potential Antihypertensive Agents

To measure the hydrophobic character of the ribose moiety of doridosine on the adenosine receptors, 2′,3′-didehydro-2′,3′-dideoxydoridosine (2) and 2′,3′-dideoxydoridosine (3) were prepared. Initial treatment of doridosine with N,N-dimethylformamide diethylacetal, and subsequently with tert-butyldimethylsilyl chloride gave 5. Compound 5 was then reacted with 1,1′-thiocarbonyldiimidazole and the resulting thionocarbonate 6 was heated with triethyl phosphite at 135°C to afford 7. Treatment of compound 7 with tetrabutylammonium fluoride and methanolic ammonia furnished compound 2 in good yield. Compound 2 was subjected to catalytic hydrogenation affording compound 3 in 85% yield.     

Heat-resistant resins obtained from polymer precursors bearing β,β′-dicyanovinyl terminal groups

Certain polymer precursors of the general formula: where A is an aromatic structure bearing ester, amide, azomethine, or imide linkages were synthesized. Particularly, 4-hydroxybenzaldehyde was condensed with malonitrile to afford 4-hydroxy-β,β′-dicyanostyrene which reacted with a half molar amount of terephthaloyl dichloride in the presence of an acid acceptor. In addition, 3-nitrobenzaldehyde was condensed with malonitrile to yield 3-nitro-β,β′-dicyanostyrene that was catalytically hydrogenated to the corresponding amine. The latter reacted with a half molar amount of terephthaloyl dichloride, terephthaldehyde, pyromellitic dianhydride, or benzophenone tetracarboxylic dianhydride. The polymer precursors were characterized by elemental analyses as well as IR and ¹H-NMR spectroscopy. Their curing behavior was investigated by DTA. Crosslinked polymers were obtained by curing the monomers at 300°C for 24 h. They were stable up to 407–437°C in N₂ and afforded an anaerobic char yield of 65–50% at 800°C. The thermal stability of resins was correlated with their chemical structures. © 1993 John Wiley & Sons, Inc.     

A New Four‐Component Reaction for the Synthesis of Spiro[4H‐indeno[1,2‐b]pyridine‐4,3′‐[3H]indoles]

A new four‐component synthesis of spiro[4H‐indeno[1,2‐b]pyridine‐4,3′‐[3H]indoles] and spiro[acenaphthylene‐1(2H),4′‐[4H‐indeno[1,2‐b]pyridines] by the reaction of indane‐1,3‐dione, 1,3‐dicarbonyl compounds, isatins (=1H‐indole‐2,3‐diones) or acenaphthylene‐1,2‐dione, and AcONH₄ in refluxing toluene in the presence of a catalytic amount of pyridine is reported.     

Efficient and Chemoselective Methods for the Synthesis of Some Isobenzofuran and Spiro[isobenzofuran‐1,2′‐pyrrole] Derivatives

An efficient and practical one‐pot procedure for the direct chemoselective synthesis of isobenzofuran and spiro[isobenzofuran‐1,2′‐pyrrole] derivatives is developed via oxidative cleavage of 3a,8b‐dihydroxyindeno[1,2‐b]pyrrol‐4‐ones with Pb(OAc)₄ at room temperature.