The layer‐by‐layer (LBL) assembly of poly(diallyldimethylammonium chloride) and poly(sodium styrene sulfonate) on poly(sulfo propyl methacrylate) brushes resulted in films with nanometer‐ and micrometer‐sized holes and ledges, observed by atomic force microscopy and scanning electron microscopy. Polyelectrolyte assembly was followed by the quartz microbalance technique. The formation of ledges and holes is explained by the interaction of the brush polymers with the incoming polyelectrolytes during the LBL assembly, inducing a spatially localized and self‐organized accumulation of the assembled polymers.
Novel glucosamine hydrochloride functionalized water‐soluble conjugated polyfluorene was easily synthesized through Cu(I)‐catalyzed azide/alkyne “click” ligation and Suzuki coupling polymerization. The water‐solubility and biocompatibility of the polymer were improved after grafting glucosamine hydrochloride to the side chains of the conjugated polymer. As a fluorescent model system of chitosan, its interaction with single‐stranded DNA was studied by spectrofluorometric titration.
Polycondensation of 1‐(2‐pyrimidinyl)pyrrole with 2,7‐dibromo‐9,9‐dioctylfluorene via Ru‐catalyzed direct arylation gives the corresponding conjugated polymer with a molecular weight of 19 800 in 86% yield. The introduction of directing group, 2‐pyrimidinyl substituent, into the pyrrole monomer induces ortho‐metalation and provides the site‐selective direct arylation polycondensation at the α‐position of pyrrole unit without the protection of β‐position. The removal of 2‐pyrimidinyl substituent on the pyrrole unit proceeds efficiently and results in the enhancement of coplanarity along the main chain of the polymer.
Phosphorescent conjugated polymers consisting of alternating p‐phenylene‐ethynylene and ‘para‐’ or ‘meta‐type’ Pt(II)‐salphen luminophore units have been synthesized. Side‐arms bearing different substituents (n‐alkoxy and acetylated‐sugar) have afforded contrasting emission properties that are attributed to the polymer conformation, extent of π‐stacking interactions and differences in chemical structure. Intriguing selectivity in luminescent sensing of metal ions has been observed.
Colloidal quantum dots are well‐established probes for quantum optical experiments. However, they possess a limited stability toward their environment. Herein, the generation of hybrid particles composed of a high optical quality quantum dot centered in a polymer particle by means of a miniemulsion polymerization procedure is reported. This embedding strongly enhances emission intensity and photochemical stability of these single‐photon emitters. At the same time, their colloidal mobile nature is not compromised.
Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.
The free radical grafting of polyethylene with vinyl monomers by reactive extrusion was studied numerically. Numerical computation expressions of key variables, such as the concentrations of the initiator and polymer, grafting degree, average molecular weight and apparent viscosity, were deduced. The evolutions of the above variables were predicted by means of an uncoupled semi‐implicit iterative algorithm. The monomer conversion monotonically increases with decreasing throughput or increasing initial initiator concentration; with increasing barrel temperature, the monomer conversion first increases then decreases. The simulated results are nearly in good agreement with the experimental results.
A conjugated polymer containing an electron donating backbone (triphenylamine) and an electron accepting side chain (cyanoacetic acid) with conjugated thiophene units as the linkers has been synthesized. Dye‐sensitized solar cells (DSSCs) are fabricated utilizing this material as the dye sensitizer, resulting a typical power conversion efficiency of 3.39% under AM 1.5 G illumination, which represents the highest efficiency for polymer dye‐sensitized DSSCs reported so far. The results show the good promise of conjugated polymers as sensitizers for DSSC applications.
Poly(ethersulfone) membranes were surface modified in a one‐step procedure. For this purpose, the membranes were soaked with aqueous solutions of different low‐molecular weight molecules bearing diverse hydrophilic functionalities and subject to electron beam treatment. No catalysts, photoinitiators, organic solvents or other toxic reagents were used, and no additional synthetic or purification steps were required.
Furan ring‐functionalized solid surfaces are achieved by the initiated chemical vapor deposition (iCVD) method, a solvent‐free process to form films under mild conditions. The polymerization of furfuryl methacrylate monomer is initiated by a resistively heated filament wire. The functionality of the furan group in the iCVD film enabled Diels–Alder chemistry with 4‐phenyl‐1,2,3‐triazolin‐3,5‐dione (N‐PTD).
Cross‐linked lyotropic liquid crystal (LLC) assemblies represent a new class of polymer materials for membrane applications. These materials are formed by the phase‐segregation and self‐assembly of polymerizable amphiphiles in water into condensed ordered ensembles that can be cross‐linked in situ with retention of microstructure. The resulting LLC polymer networks have ordered, nanometer‐scale aqueous and cross‐linked organic domains, which can be used to affect gas solubility and diffusivity through the polymer to help separate molecules via the solution–diffusion mechanism. The open aqueous domains can also be used for pore transport and size exclusion with resolution on the molecular size level. The use and application potential of cross‐linked LLC assemblies as gas separation membranes, selective vapor barrier materials, and water nanofiltration and desalination membranes are presented.
Summary: A general method for the generation of two‐dimensional (2D) ordered, large‐area, and liftable conducting polymer‐nanobowl sheet has been demonstrated via chemical polymerization for the first time. The sheet is made using the monolayer self‐assembled from polystyrene (PS) spheres at the aqueous/air interface as template, followed by depositing conducting polymer on the part of PS monolayer submerging in the aqueous phase via chemical polymerization, and core extraction. During the process of polymerization, no substrate is required, which caused the as‐prepared patterned conducting polymer sheet can be easily lifted‐off and deposited, in full size, on any flat substrate. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Fourier transform infrared (FTIR) spectrum were used to characterize the products.
Morphology of the polyaniline‐CSA nanobowl sheet. 相似文献
Microporous films consisting of two‐dimensionally ordered void structures ‐ so‐called honeycomb films ‐ were produced by evaporation of polymer solutions under high humidity. Two types of poly(vinyl cinnamate)s were used: A newly synthesized amphiphilic poly(vinyl cinnamate) and a mixture of a commercial poly(vinyl cinnamate) and an amphiphilic polyion complex. Photo‐crosslinking of the honeycomb structure could be achieved by UV irradiation while completely retaining the film morphology. The crosslinked films showed excellent stability against organic solvents.
The need to biofunctionalize polymer surfaces for targeted bio‐related applications continues to grow, and efforts designed to meet this need rely heavily on surface grafting or polymerization. In this study, we provide a viable alternative by demonstrating that the peptide segment of a polymer‐peptide conjugate can be selectively driven to the surface of polymer nano/microfibers during electrospinning due to contrast in polarizability. Judicious choice of the polymer sequence in the conjugate permits use of the conjugate with compatible fiber‐forming polymers. Here, we use a water soluble poly(ethylene oxide)‐containing conjugate in combination with a hydrophobic thermoplastic, poly(methyl methacrylate). Surface enrichment is measured by X‐ray photoelectron spectroscopy, and fiber morphology is investigated by electron microscopy. Microfibers generated from the blends examined here are largely resistant to long term water immersion and are thus suited as support scaffolds or filtration membranes.
A main‐chain liquid crystalline polymer has been obtained by applying a Hoveyda–Grubbs 2nd generation catalyst in acyclic diene metathesis polymerization (ADMET) of a monomer containing on one end a terminal dimethylvinylsilyl group and at the other end a terminal C C double bond. This material showed an interesting Iso‐de Vries SmA* – SmC* – Glass phase transition with a very small layer shrinkage on progressing from the SmA* phase into the SmC* phase. Will this material present a helical structure along the fiber axis in the SmC* temperature range? Several physical characterization methods including XRD, optical observation, and microtome technique have been used to investigate the internal structural organization in this liquid crystalline fiber.
Reactions between the ethylene groups in the backbone of conjugated polymers under UV illumination and heat treatment result in the cross‐linking of the main polymer chains. The cross‐linking leads to two simultaneous results in the polymer: excellent solvent resistance and increased bandgap. Using this reaction, three‐color polymer light‐emitting diodes (PLEDs) with a multi‐layer structure can be easily realized by a dry photo‐pattern in an active‐gas‐free environment. Multi‐layer blue devices with dramatically enhanced efficiency can also be achieved conveniently.
Summary: Highly crystalline ferroelectric polymer films [vinyidene fluoride and trifluoroethylene, β‐P(VDF‐TrFE), 260–15 nm thick] were characterized with FTIR reflectance‐transmission microspectroscopy (FTIR‐RTM) mapping technique (400 µm × 400 µm spatial resolution). The amorphous and crystalline fractions were identified locally. FTIR‐RTM maps (1 cm2 area) provided a unique in‐depth view of the ultrathin films. Lower film thickness suppressed growth of the crystalline phase. Increased content of amorphous phase lead to non‐uniform films with degraded ferroelectric behavior.
FTIR‐RTM maps of the distribution of the amorphous phase in the 80 and 35 nm films. 相似文献
