New Star‐Shaped Metallo‐Polymeric Chromophores

The synthesis of new star‐shaped polymers, prepared by atom transfer radical polymerization of methyl methacrylate with tris(dialkylaminostyryl‐2,2′‐bipyridine) zinc(II) and iron(II) metalloinitiators, is reported. Their thermal and optical (absorption and emission) properties are discussed.

Structure of the star‐shaped polymers.     

Poly(diindenonaphthalene) and Poly(indenofluorene) – Tuning the Absorption Properties of Low Bandgap Cross‐Conjugated Polymers

Summary: Semiconducting polymers with moderate HOMO–LUMO energy gaps between 1.5 and 2.0 eV are of increasing attraction as donor components of bulk heterojunction‐type organic solar cells. The synthesis and characterization of a novel cross‐conjugated, aromatic polymer, poly(diindenonaphthalene) PDIN, with a HOMO‐LUMO gap of ca. 1.6 eV (λ_max: 724 nm) in comparison to poly(indenofluorene) PIF, a previously described, structurally related polymer, is presented. The replacement of the central benzene ring of PIF by a naphthalene moiety in PDIN leads to an increase of the optical bandgap energy of ca. 0.16 eV.

Chemical structure of PIF and PDIN.     

New Millable Polyurethane/Organoclay Nanocomposite: Preparation,Characterization and Properties

The preparation, characterization and properties of novel millable polyurethane/organoclay nanocomposites are reported. Clay treated with methyl tallow bis(2‐hydroxyethyl) quaternary ammonium chloride was used as an organoclay for nanocomposite preparation. X‐ray diffraction indicated the intercalation of polymer chains inside the interlayer spacings of the clay. Dynamic mechanical analysis showed a significant increase in storage modulus, and tensile strength increases with increased organoclay loading.

X‐ray diffraction patterns of millable polyurethane/organoclay nanocomposites.     

Boron Subphthalocyanine Polymers by Facile Coupling to Poly(acrylic acid‐ran‐styrene) Copolymers Synthesized by Nitroxide‐Mediated Polymerization and the Associated Problems with Autoinitiation

Boron subphthalocyanines (BsubPcs) are macrocyclic aromatic small molecules containing a chelated boron atom. BsubPcs have interesting optoelectronic and physical properties, justifying their use in various organic electronic devices such as organic solar cells and organic light‐emitting diodes. However, our group has only recently reported the first incorporation of a BsubPc moiety into a polymer using a two‐step post‐polymerization procedure. This communication outlines the use of acrylic acid as a method for obtaining carboxylic acid functional copolymers for the facile coupling to BsubPc post polymerization. In addition, the observations and the proposed mechanism of a side product unique to the copolymerization of acrylic acid and styrene due to autoinitiation are presented.

     

Multiscale Modeling of Branch Length in Butyl Acrylate Solution Polymerization

Branch lengths resulting from both backbiting and intermolecular chain transfer to polymer are examined for the solution polymerization of butyl acrylate, using a rate‐equation model and ordinary differential equations. Backbiting is allowed to generate branches of varying length, according to a cumulative distribution function obtained from a lattice kinetic Monte Carlo simulation. About 8% of the branches produced by backbiting are 10 mers or longer. In contrast to common assumptions about the origins of short‐chain and long‐chain branches, the model indicates that nearly all of the long‐chain branches may be produced by backbiting, rather than intermolecular chain transfer to polymer.

     

A New Strategy to Exfoliate Silicone Rubber/Clay Nanocomposites

Summary: A new strategy was developed to prepare disorderly exfoliated nanocomposites, in which a soft siloxane surfactant with a weight‐average molecular weight ( ) of 1 900 was adopted to modify the clay. The modified clay slurry was then mixed with silicone rubber by hand, and exfoliation was achieved. The proposed mechanism thereof was verified by TEM and XRD. The physical entanglement of the soft siloxane surfactant plays a vital role in the diffusion and intercalation of the matrix molecules during the compounding of the slurry‐polymer mixture. This simple method is applicable to other silicone‐based materials reinforced by clay.

TEM micrograph of silicone rubber/clay‐sil nanocomposite.     

The Nucleating Effect of Carbon Nanotubes on Crystallinity in R‐BAPB‐Type Thermoplastic Polyimide

Summary: The relatively high degree of crystallinity of a new thermoplastic polyimide (PI) makes it a favorable matrix candidate for fiber reinforced composites. This advantage is the result of the ability of the matrix to recrystallize during the composite manufacturing process. In this study we examine the potential nucleating effect of carbon nanotubes on a thermoplastic PI. In addition to their inherent mechanical contribution, the carbon nanotubes help recover a significant proportion of the original crystallinity.

Scanning electron micrograph of the spherulitic structure of a recrystallized carbon nanotube/polyimide film.     

CF3SO3H Initiated Cationic Polymerization of Diisopropenylbenzenes in Macrobatch and Microflow Systems

CF₃SO₃H was found to serve as a more superior initiator for the polymerization of diisopropenylbenzenes than the conventionally used acids such as H₂SO₄. Much faster polymerization at lower temperatures seems to be ascribed to the higher acidity of CF₃SO₃H. The use of microflow systems was also found to be effective in increasing the indane unit content, especially for 1,4‐DPB. Fast mixing and uniformity of the temperature seem to be responsible. The thus‐obtained polymers of high indane unit content serve as useful materials having high thermal resistance and low dielectric constants.

     

Step‐Growth Radical Addition‐Coupling Polymerization (RACP) for Synthesis of Alternating Copolymers

We report a new type of step‐growth radical addition‐coupling polymerization (RACP) involving consecutive addition of carbon‐centered radical derived from α,α′‐dibromo dibasic ester to NO double bond of C‐nitroso compound followed by cross‐coupling of carbon‐centered radical and in situ formed nitroxyl radical, which produces alternating copolymers with high molecular weight and unimodal molecular weight distribution from saturated and unsaturated monomers.

     

Bergman Cyclization in Polymer Chemistry and Material Science

Bergman cyclization of enediynes, regarded as a promising strategy for anticancer drugs, now finds its own niche in the area of polymer chemistry and material science. The highly reactive aromatic diradicals generated from Bergman cyclization can undergo polymerization acting as either monomers or initiators of other vinyl monomers. The former, namely homopolymerization, leads to polyphenylenes and polynaphthalenes with excellent thermal stability, good solubility, and processability. The many remarkable properties of these aromatic polymers have further endowed them to be manufactured into carbon‐rich materials, e.g., glassy carbons and carbon nanotubes. Whereas used as initiators, enediynes provide a novel resource for high molecular weight polymers with narrow polydispersities. The aromatic diradicals are also useful for introducing oligomers or polymers onto pristine carbonous nanomaterials, such as carbon nano‐onions and carbon nanotubes, to improve their dispersibility in organic solvents and polymer solutions.

     

Microstructure,Kinetics, and Transport in Oil‐in‐Water Microemulsion Polymerizations

The kinetics of microemulsion polymerization depend on the structure of the initial microemulsion and the transport of species between the aqueous domain, the micelles, and the polymer particles. The water solubility of the monomer and the proximity of the initial microemulsion composition to a phase boundary are key considerations for studying microemulsion polymerization kinetics and producing the desired products. Complications frequently arise in the synthesis of copolymers or the incorporation of controlled polymerization mechanisms because of the compartmentalized nature of microemulsion polymerizations.

     

CuBr2/N,N,N′,N′‐Tetra[(2‐pyridal)methyl]ethylenediamine/Tertiary Amine as a Highly Active and Versatile Catalyst for Atom‐Transfer Radical Polymerization via Activator Generated by Electron Transfer

Summary: A highly active and versatile CuBr₂/N,N,N′,N′‐tetra[(2‐pyridal)methyl]ethylenediamine (CuBr₂/TPEN)‐tertiary amine catalyst system has been developed for atom transfer radical polymerization via activator‐generated‐by‐electron‐transfer (AGET ATRP). The catalyst mediates good control of the AGET ATRPs of methyl acrylate, methyl methacrylate, and styrene at 1 mol‐% catalyst relative to initiator. A mechanism study shows that tertiary amines such as triethylamine reduces the CuBr₂/TPEN complex to CuBr/TPEN.

The GPC traces of PSt, PMA, and PMMA prepared by AGET ATRP at 1 mol‐% of catalyst relative to initiator are monomodal and have low polydispersities.     

A Monte Carlo Simulation of Homogeneous Crystallization in Confined Spaces: Effect of Crystallization Kinetics on the Avrami Exponent

Homogeneous nucleation in polymers and subsequent crystallization in spaces confined relative to spherulitic dimensions in one direction has been simulated for a wide range of nucleation and growth rates. An empirical equation based on simulation results relating an Avrami exponent of crystallization to growth and nucleation rates along with the characteristic dimension of crystallizing volume has been proposed. It was found that for ideal homogeneous crystallization, the Avrami exponent can be significantly lower than the anticipated values for free unconstrained growth; therefore, all crystallization conditions and parameters must be taken into account in order to make a conclusion on the character of the observed crystallization.