Advancing the Solid State Properties of Metallo‐Supramolecular Materials: Poly(ε‐caprolactone) Modified π‐Conjugated Bis(terpyridine)s and their Zn(II) Based Metallo‐Polymers

A set of rigid π‐conjugated bis(terpyridine) macroligands with poly(ε‐caprolactone) (pCL) on their side chains was synthesized and investigated. The introduced pCL chains gave rise to enhanced processability and film‐forming properties of the materials. Blue photoluminescence with high quantum yields was observed in dilute solution and in the solid state, indicating that intermolecular aggregation of the π‐conjugated systems was effectively suppressed. The macroligands were further used for coordination with zinc(II) ions leading to new metallo‐polymers with high solubility, improved film‐forming behavior and promising photophysical properties with respect to potential OLED applications.

     

Strain state of poly(N‐isopropylacrylamide) in polystyrene‐b‐poly(N‐isopropylacrylamide) block copolymers and binary blends with polystyrene

Three diblock copolymers of polystyrene‐b‐poly(N‐isopropylacrylamide) (PS‐b‐PNIPAM) were prepared by reversible addition‐fragmentation chain transfer technique (RAFT) with compositions f_PS = 0.84, f_PS = 0.29, and f_PS = 0.33. Block copolymers rich in PNIPAM were blended with polystyrene and its morphological effects were studied. The morphology of thin films was induced by acetone vapor and determined in the dried state by means of TEM. Copolymers with f_PS = 0.84 and f_PS = 0.29 form hexagonally packed cylinder (HPC) morphologies while that with f_PS = 0.33 corresponds to a lamellar structure. In almost all cases where PNIPAM constitutes the continuous phase, a contraction of the PNIPAM blocks with respect to their average unperturbed dimension was observed, contrary to what one expects from the physics of self‐assembly of block copolymers. In contrast, for HPC morphology where PNIPAM is confined in a PS matrix, both blocks are highly extended. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1368–1376     

Metallo‐Supramolecular Graft Copolymers: A Novel Approach Toward Polymer‐Analogous Reactions

A copolymer of poly(methyl methacrylate) with terpyridine units in the side chains was synthesized utilizing free‐radical polymerization. The free terpyridine units were complexed with several different terpyridineruthenium mono‐complexes, yielding metallo‐supramolecular graft copolymers. The materials obtained were characterized by means of NMR and UV‐vis spectroscopy as well as GPC. Characterization by thermal analysis revealed distinct differences between these new materials and the initial copolymer.     

Effect of Guanidinylation on the Properties of Poly(2‐aminoethylmethacrylate)‐Based Antibacterial Materials

The effect of converting ammonium into guanidine moieties, compared to other factors such as molecular weight or hydrophobicity, on the antibacterial activity is investigated for homo‐ and copolymers of 2‐aminoethylmethacrylate in solution or coatings. Polymers are obtained by free radical polymerization, polymer‐analogous guanidinylation is conducted with cyanamide; non‐leaching immobilization is achieved by LBL assembly of homopolymers or crosslinking of functional sidegroups in copolymers. Antibacterial activity to Escherichia coli or Bacillus subtilis is determined by different standard methods. Guanidinylation improves antibacterial activity and speed as well as cytotoxicity of hydrophilic homo‐ and copolymers in solution or coatings.

     

Facile Fabrication of Multistimuli‐Responsive Metallo‐Supramolecular Core Cross‐Linked Block Copolymer Micelles

Metallo‐supramolecular core cross‐linked (CCL) micelles are fabricated from terpyridine‐functionalized double hydrophilic block copolymers, poly(2‐(2‐methoxyethoxy)ethyl methacrylate)‐b‐poly(2‐(diethylamino)ethyl methacrylate‐co‐4′‐(6‐methacryloxyhexyloxy)‐2,2′:6′,2″‐terpyridine) [PMEO₂MA‐b‐P(DEA‐co‐TPHMA)] via the formation of bis(terpyridine)ruthenium(II) complexes. These metallo‐supramolecular CCL micelles exhibit not only high structural integrity under different pH values and temperatures in aqueous solution, but multistimuli responsiveness including pH‐responsive cores, thermo‐responsive shells, and reversible dissociation of bis(terpyridine)ruthenium(II) complexes upon addition of competitive metal ion chelator, which allows for precisely controlled release of the encapsulated hydrophobic guest molecules via the combination of different stimuli.

     

Metallo‐Supramolecular Diethylene Glycol: Water‐Soluble Reversible Polymers

Bis(2,2′:6′,2″‐terpyrid‐4′‐yl) diethylene glycol was synthesized as a monomer unit and further utilized for polymerization with FeCl₂ in order to form water‐soluble coordination polymers. Viscosity measurements and film‐forming properties indicate the formation of linear coordination polymers or larger ring structures. The terpyridine/iron(II) complexes are stable up to temperatures of 210 °C, but can be uncomplexed by the addition of an excess of a strong competitive ligand (HEDTA) under mild conditions.

     

Terpyridine‐modified poly(vinyl chloride): Possibilities for supramolecular grafting and crosslinking

Commercially available poly(vinyl chloride) (PVC) was covalently modified with terpyridine supramolecular binding units in a two‐step reaction. First, PVC was modified with aromatic thiols to introduce OH functionalities into the polymer backbone, which were subsequently reacted with an isocyanate‐functionalized terpyridine binding unit. The resulting functionalized material contained metal‐ion binding sites, which could be used for grafting and crosslinking reactions. A grafting experiment was performed with a small organic terpyridine ligand. The complexation of the modified PVC with several transition‐metal ions was studied with ultraviolet–visible spectroscopy and gel permeation chromatography. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2964–2973, 2003     

Terpyridine‐substituted,fluorescent polymers and their chelation with zinc ion: The ligand‐to‐metal ratio and optical properties

Soluble, fluorescent, terpyridine‐substituted, conjugated polymers were prepared and characterized. The polymer chains included a defined oligo(phenylenevinylene) fragment, on which the terpyridine‐functional group was attached. The polymers were blue‐fluorescent with emission peaks at 400–427 nm in tetrahydrofuran solutions. Upon chelation with the Zn(II) cation, the emission maxima were shifted to a longer wavelength by as much as 113 to 506–526 nm. A model compound was also prepared to aid the structural characterization. The ratio of terpyridine to Zn²⁺ in the polymer complex was found to be 1:1 on the basis of spectroscopic evidence, which included mass spectrometry, ¹H NMR, and Job titration. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2338–2345, 2006     

Gilch Synthesis of Poly(ortho‐Phenylene Vinylenes): A Powerful Access to High‐Molecular‐Weight Blue‐Emitting Polymers

For the first time, the successful Gilch synthesis of poly(ortho‐phenylene vinylenes) (ortho‐PPVs) is reported. The molar mass of the constitutionally homogeneous ortho‐PPVs reaches values as high as M_w ≈ 300 000 Da. The ortho‐connectivity of the repeating units forces the chains to assume closely packed conformations even in good solvents. Significant perturbation of the π–electron systems and considerable shortening of the conjugation lengths are the consequences. UV–vis absorption and photoluminescence maxima consequently are shifted clearly toward shorter wavelengths compared to, e.g., classic para‐PPVs.

     

A Systematic Study of Peripherally Multiple Aromatic Ester‐Functionalized Poly(benzyl ether) Dendrons for the Fabrication of Organogels: Structure–Property Relationships and Thixotropic Property

A new class of peripherally multiple aromatic ester‐functionalized poly(benzyl ether) dendrons and/or dendrimers with different focal point substituents, surface groups, interior structures, as well as different generations have been synthesized and their structure–property relationships with respect to their gelation ability have been investigated systematically. Most of these dendrons are able to gel organic solvents over a wide polarity range. Evident dendritic effects were observed not only in gelation capability but also in thermotropic, morphological, and rheological characterizations. It was disclosed that subtle changes in peripheral ester functionalities and interior dendritic structures affected the gelation behavior of the dendrons significantly. Among all the dendrons studied, the second‐ and third‐generation dendrons G₀G₂‐Me and G₀G₃‐Me with dimethyl isophthalates (DMIP) as peripheral groups exhibited the best capability in gelation, and stable gels were formed in more than 22 aromatic and polar organic solvents. The lowest critical gelation concentration (CGC) reached 2.0 mg mL^?1, indicating that approximately 1.35×10⁴ solvent molecules could be entrapped by one dendritic molecule. Further study on driving forces in gel formation was carried out by using a combination of single‐crystal/powder X‐ray diffraction (XRD) analysis and concentration‐dependent (CD)/temperature‐dependent (TD) ¹H NMR spectroscopy. The results obtained from these experiments revealed that the multiple π–π stacking of extended π‐systems due to the peripheral DMIP rings, cooperatively assisted by non‐conventional hydrogen‐bonding, is the key contributor in the formation of the highly ordered supramolecular and fibrillar network. In addition, these dendritic organogels exhibited unexpected thixotropic‐responsive properties, which make them promising candidates with potential applications in the field of intelligent soft materials.     

A Novel Approach to Prepare Porous Poly(N‐isopropylacrylamide) Hydrogel with Superfast Shrinking Kinetics

In this study, the hydrophobic liquid template method was firstly used to prepare temperature sensitive, porous poly(N‐isopropylacrylamide) (PNIPAAm) hydrogel. During the radical polymerization, hydrophobic polydimethylsiloxane (PDMS) and surfactant sodium dodecyl sulfate (SDS) were used as liquid templates and stabilizer, respectively. After removal of the liquid templates, porous PNIPAAm hydrogel was obtained. This gel exhibited superfast shrinking properties when being transferred from below to above the lower critical solution temperature (LCST), which was ascribed to the interconnected porous structures.

     

Poly(N‐phenylmaleimide‐co‐acrylic acid)–copper(II) and poly(N‐phenylmaleimide‐co‐acrylic acid)–cobalt(II) complexes: Synthesis,characterization, and thermal behavior

The free‐radical copolymerization of N‐phenylmaleimide (N‐PhMI) with acrylic acid was studied in the range of 25–75 mol % in the feed. The interactions of these copolymers with Cu(II) and Co(II) ions were investigated as a function of the pH and copolymer composition by the use of the ultrafiltration technique. The maximum retention capacity of the copolymers for Co(II) and Cu(II) ions varied from 200 to 250 mg/g and from 210 to 300 mg/g, respectively. The copolymers and polymer–metal complexes of divalent transition‐metal ions were characterized by elemental analysis, Fourier transform infrared, ¹H NMR spectroscopy, and cyclic voltammetry. The thermal behavior was investigated with differential scanning calorimetry (DSC) and thermogravimetry (TG). The TG and DSC measurements showed an increase in the glass‐transition temperature (T_g) and the thermal stability with an increase in the N‐PhMI concentration in the copolymers. T_g of poly(N‐PhMI‐co‐AA) with copolymer composition 46.5:53.5 mol % was found at 251 °C, and it decreased when the complexes of Co(II) and Cu(II) at pHs 3–7 were formed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4933–4941, 2005     

Using Metallo‐Supramolecular Block Copolymers for the Synthesis of Higher Order Nanostructured Assemblies

Many research groups have explored the properties and solution self‐assembly of main chain metallo‐supramolecular multiblock copolymers. Until recently, these metal complexes have been used to prepare mainly micelle type structures. However, the self‐assembly of such copolymers has been exploited further to create more advanced architectures which utilize the reversible supramolecular linkage of their building blocks as a key component in their synthesis. Furthermore, the incorporation of multiple orthogonal interactions and stimuli responsive polymers into their design, enables more precise external control of their properties. This feature article discusses recent developments and provides an insight into their potential exploitation and development for the creation of novel, smart, and responsive nanostructures.

     

Supramolecular Polymers Self‐Assembled from trans‐Bis(pyridine) Dichloropalladium(II) and Platinum(II) Complexes

Two structurally similar trans‐bis(pyridine) dichloropalladium(II)‐ and platinum(II)‐type complexes were synthesized and characterized. They both self‐assemble in n‐hexane to form viscous fluids at lower concentrations, but form metallogels at sufficient concentrations. The viscous solutions were studied by capillary viscosity measurements and UV/Vis absorption spectra monitored during the disassembly process indicated that a metallophilic interaction was involved in the supramolecular polymerization process. For the two supramolecular assemblies, uncommon continuous porous networks were observed by using SEM and TEM revealed that they were built from nanofibers that fused and crosslinked with the increase of concentration. The xerogels of the palladium and platinum complexes were carefully studied by using synchrotron radiation WAXD and EXAFS. The WAXD data show close stacking distances driven by π–π and metal–metal interactions and an evident dimer structure for the platinum complex was found. The coordination bond lengths were extracted from fitting of the EXAFS data. Moreover, close Pt^II–Pt^II (Pd^II–Pd^II) and Pt?Cl (Pd?Cl) interactions proposed from DFT calculations in the reported oligo(phenylene ethynylene) (OPE)‐based palladium(II) pyridyl supramolecular polymers were also confirmed by using EXAFS. The Pt^II–Pt^II interaction is more feasible for supramolecular interaction than the Pd^II–Pd^II interaction in our simple case.     

Unexpected Cononsolvency Behavior of Poly (N‐isopropylacrylamide)‐Based Microgels

Poly (N‐isopropylacrylamide) (pNIPAm)‐based microgels undergo a transition from fully water swollen (solvated) to deswollen (desolvated) as the temperature of the water they are dissolved in is increased >32 °C. In this submission, we examine how the temperature of this transition, i.e., the volume phase transition temperature (VPTT), depends on the concentration of methanol (MeOH) in water the microgels are dissolved in. To accomplish this, pNIPAm‐based etalons are utilized, and it is shown that the VPTT for the microgels is much less than that previously observed for linear pNIPAm and pNIPAm‐based microgels. Furthermore, and most interestingly, it is determined that the microgels can collapse in solutions containing high MeOH (>∼65% MeOH) concentration. This is in contrast to previous studies, which show that no VPTT is observed for pNIPAm in aqueous solutions containing >∼65% MeOH.

     

Nanotube Friendly Poly(N‐isopropylacrylamide)

Poly(N‐ispropylacrylamide) [PNIPAM] is a widely studied polymer for use in biological applications due to its lower critical solution temperature (LCST) being so close to the human body temperature. Unfortunately, attempts to combine carbon nanotubes (CNTs) with PNIPAM have been unsuccessful due to poor interactions between these two materials. In this work, a PNIPAM copolymer with 1 mol‐% pyrene side group [p‐PNIPAM] was used to produce a thermoresponsive polymer capable of stabilizing both single and multi‐walled carbon nanotubes (MWNTs) in water. The presence of pyrene in the polymer chain lowers the LCST less than 4 °C and the interaction with nanotubes does not show any influence on LCST. Moreover, p‐PNIPAM stabilized nanotubes show a temperature‐dependent dispersion in water that allows the level of nanotube exfoliation/bundling to be controlled. Cryo‐TEM images, turbidity, and viscosity of these suspensions were used to characterize these thermoresponsive changes. This ability to manipulate the dispersion state of CNTs in water with p‐PNIPAM will likely benefit many biological applications, such as drug delivery, optical sensors, and hydrogels.

     

Self‐organization of striped pattern of refractive indices in photopolymer film

We report on a self‐organized striped pattern of refractive indices in a photopolymer film. Silicon oxide (SiO₂) particles (1.3‐μm diameter) were dispersed on a cover glass above a monomer mixture (bifunctional methacrylate monomer, cyanoethylmethacrylate, and 2,4,6‐trimethylbenzoyldiphenylphosphine oxide), and the sample was uniformly irradiated from a tube light source. The self‐organized striped pattern was observed inside a 0.45‐mm thickness photopolymer film. In contrast, no pattern was observed in a 0.45‐mm thickness sample photopolymerized without particles on a cover glass. The results suggest that the SiO₂ particles acted as “lenses” and produced a light distribution reflecting the shape of the light source used during the irradiation. The photopolymerization extended in depth according to the light distribution, and then the striped pattern was generated inside a medium. The photopolymer film with the striped pattern has an angular dependence in the transmittance as a result of the microstructure and can be applied to a flexible optical transmission filter. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3351–3358, 2004     

Synthesis and UCST‐type phase behavior of OEGylated poly(γ‐benzyl‐l‐glutamate) in organic media

A series of OEGylated poly(γ‐benzyl‐l ‐glutamate) with different oligo‐ethylene‐glycol side‐chain length, molecular weight (MW = 8.4 × 10³ to 13.5 × 10⁴) and narrow molecular weight distribution (PDI = 1.12–1.19) can be readily prepared from triethylamine initiated ring‐opening polymerization of OEGylated γ‐benzyl‐l ‐glutamic acid based N‐carboxyanhydride. FTIR analysis revealed that the polymers adopted α‐helical conformation in the solid‐state. While they showed poor solubility in water, they exhibited a reversible upper critical solution temperature (UCST)‐type phase behavior in various alcoholic organic solvents (i.e., methanol, ethanol, 1‐propanol, 1‐butanol, 1‐pentanol, and isopropanol). Variable‐temperature UV–vis analysis revealed that the UCST‐type transition temperatures (T_pts) of the resulting polymers were highly dependent on the type of solvent, polymer concentration, side‐ and main‐chain length. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1348‐1356     

Changes in the Hydration State of a Block Copolymer of Poly(N‐isopropylacrylamide) and Poly(ethylene oxide) on Thermosensitive Micellization in Water

A diblock copolymer of poly(N‐isopropylacrylamide) and poly(ethylene oxide) (PiPA‐b‐PEO) has been prepared by radical polymerization with a ceric ion initiation system. Its thermosensitive micellization has been investigated by means of IR and fluorescence spectroscopy. The PiPA segments are critically dehydrated above 33.5°C (5 wt.‐%) and associate through hydrophobic interaction to form the hydrophobic core of the micelle. In contrast, the change in the hydration state of the PEO segments upon micellization is small.     

Poly(N‐isopropylacrylamide) Nanoparticle‐Incorporated PNIPAAm Hydrogels with Fast Shrinking Kinetics

Summary: Novel temperature‐responsive poly(N‐isopropylacrylamide) (PNIPAAm) nanoparticle‐containing PNIPAAm hydrogels were prepared by radical polymerization. In comparison with conventional PNIPAAm hydrogels, the PNIPAAm gels thus prepared exhibit much faster response rates as the temperature is raised above the lower critical solution temperature. The improved properties are a result of the incorporation of PNIPAAm particles, which first shrink and then generate pores for water molecules to be quickly squeezed out of the bulky PNIPAAm gels.

Schematic illustration of the shrinking process: (I) First PNIPAAm particles shrink and generate pores; (II) the bulky gels then shrink further at a rapid rate.