Poly(dimethylsiloxane) copolymers were synthesized directly from AA/BB monomers employing a CuAAC reaction (click chemistry) in a polyaddition approach. Using organic dialkynes and oligo(siloxane)s end‐functionalized with azide moieties it was possible to obtain siloxane‐based copolymers with TPE properties by click chemistry for the first time. As seen from DSC experiments, properties were strongly dependent on the incorporated organic comonomer.
Summary: Polystyrene‐block‐poly(methyl methacrylate) nanorods were prepared by wetting ordered porous alumina templates. We systematically investigated the diameter‐dependence of their morphologies by varying the pore diameters of the templates from 400 nm down to 25 nm. If the pore diameter exceeds the period of the block copolymer, the pores accommodate a non‐integer number of repeat periods. In case of smaller pores the occurrence of an ordered state could not be unambiguously verified.
TEM image of an ultra‐thin slice containing a cross‐section of a polystyrene‐block‐poly(methyl methacrylate) nanorod embedded in epoxy resin. 相似文献
Summary: The grafting of poly(ethylene oxide) (PEO) onto silica nanoparticles was performed in situ by the ring‐opening polymerization of the oxirane monomer initiated from the mineral surface using aluminium isopropoxide as an initiator/heterogeneous catalyst. Alcohol groups were first introduced onto silica by reacting the surfacic silanols with prehydrolyzed 3‐glycidoxypropyl trimethoxysilane. The alcohol‐grafted silica played the role of a coinitiator/chain‐transfer agent in the polymerization reaction and enabled the formation of irreversibly bonded polymer chains. Silica nanoparticles containing up to 40 wt.‐% of a hairy layer of grafted PEO chains were successfully produced by this technique.
The grafting of poly(ethylene oxide) (PEO) onto silica nanoparticles by in‐situ ring‐opening polymerization of the oxirane monomer. 相似文献
Summary: An amino‐functionalized bipyridine ligand was prepared in order to serve as a bridging unit to an activated low‐molecular‐weight monomethyl ether of poly(ethylene glycol) (PEG). Coordination of a ruthenium(II ) phenantroline precursor onto the formed PEG‐containing bipyridine ligand yielded a metal‐containing polymer which shows interesting properties for solar cell applications.
A schematic of the described polymeric ruthenium(II ) complex and its absorption and emission properties. 相似文献
Computer simulations reveal the unique conformation of or erythro diisotactic polynorbornene, a polymer with numerous important applications in microelectronics. While previous simulations suggested that this polymer adopts a helix‐kink morphology, the results presented herein indicate that the reversal of the helix symmetry is the origin of such kinks which cause a transition from a rigid‐rod conformation to a random coil with increasing molecular weight. An RIS model was developed that accurately predicts the unique conformation of this polymer. This model predicts a rigid‐rod helical conformation that eventually transitions to a random coil at a degree of polymerization of approximately 500.
Two near‐infrared (NIR) absorbing metallopolyynes of platinum ( P1 and P2 ) functionalized with a weakly electron‐donating fluorene unit and two strong electron acceptors (viz. benzo[1,2‐c:4,5‐c′]bis([1,2,5]thiadiazole) and [1,2,5]thiadiazolo[3,4‐i ]dibenzo[a,c]phenazine) were synthesized and applied for NIR photovoltaic applications. With these designed weak donor–strong acceptor electronic traits, these metallopolymers possess narrow bandgaps of 1.54 and 1.65 eV and a low HOMO level of about 5.50 eV, thus inducing a power conversion efficiency up to 1% for bulk heterojunction solar cells at the NIR wavelength.
POSS‐functionalized polyisobutylenes (PIBs) were synthesized by carbocationic polymerization using an epoxy‐POSS/TiCl4 initiating system in hexane/methyl chloride (60:40 v/v) solvent mixture at −80 °C. 1H NMR spectroscopy verified the incorporation of one epoxy‐POSS per polymer chain. Light scattering and TEM analysis demonstrated the formation of 50–100 nm sized aggregates and micron‐sized clusters.
Summary: We describe an interesting approach to the fabrication of wettability gradients from hydrophobicity to superhydrophobicity in low‐density polyethylene (LDPE) films by first forming high porosity surfaces and placing the specimens onto linear temperature gradients. While the polymer chosen for the study is non‐polar, its microporous layer provides sufficient superhydrophobicity. Lateral gradient heating of the layer results in partial melting of the polymer and correspondingly decreases porosity thus decreasing hydrophobicity.
Supramolecular complexes of a poly(tert‐butoxystyrene)‐block‐polystyrene‐block‐poly(4‐vinylpyridine) triblock copolymers and less than stoichiometric amounts of pentadecylphenol (PDP) are shown to self‐assemble into a core–shell gyroid morphology with the core channels formed by the hydrogen‐bonded P4VP(PDP)complexes. After structure formation, PDP was removed using a simple washing procedure, resulting in well‐ordered nanoporous films that were used as templates for nickel plating.
The synthesis of P(VA‐co‐VAc)‐graft‐PDMS copolymers has been achieved in microsuspension by direct reaction between an epoxy‐terminated PDMS and some pendant alcohol groups in P(VA‐co‐VAc). In this synthesis, the copolymer is used both as dispersant and reactant. The hydrophilic/hydrophobic character of the final material can be varied at will by incorporating various contents of epoxy‐functionalized PDMS through optimized reaction conditions. The final composition was determined by TGA and 1H NMR. Products prepared from monofunctional PDMS were easily redispersed in water whereas a film of crosslinked materials, arising from difunctional PDMS, showed the best waterproofing as shown by contact angle analysis.
Au nanoparticles (NPs) and polymer composite particles with phase‐separation structures were prepared based on phase separation structures. Au NPs were successfully synthesized in amphiphilic block‐copolymer micelles, and then composite particles were formed by a simple solvent evaporation process from Au NPs and polymer solution. The phase separated structures (Janus and Core‐shell) were controlled by changing the combination of polymers having differing hydrophobicity.
A poly(methyl methacrylate)‐block‐poly(acrylic acid)‐block‐poly(2‐vinyl pyridine)‐block‐poly(acrylic acid)‐block‐poly(methyl methacrylate) (PMMA‐PAA‐P2VP‐PAA‐PMMA), pentablock terpolymer has been synthesized by anionic polymerization with sequential addition of monomers and studied in aqueous media at low pH. The system exhibits combined properties and adopts the behavior of ‘telechelic’ polyelectrolytes and that of double hydrophilic polyampholytes. This complex behavior leads to the pentablock terpolymer forming a pH and temperature sensitive reversible hydrogel at very low polymer concentration.
The synthesis of cationic mono‐(6‐O‐(1‐vinylimidazolium))‐ß‐cyclodextrin with toluenesulfonate as the corresponding anion is described. Free‐radical copolymerization of the resulting host–guest complex with N‐isopropylacrylamide or N,N‐diethylacrylamide yielded copolymers showing a temperature‐controlled solubility window in water. The impact of different anionic guests and salt concentrations on solubility behavior was investigated via turbidity measurements.
The polydomain–monodomain (PM) transformation takes place when a polydomain of a smectic‐C main‐chain liquid‐crystalline elastomer (SmC MCLCE) is uniaxially stretched. We present results based on a combination of mechanical and X‐ray experiments which show how the domains initially rearrange to finally form a perfect conical layer distribution (monodomain) when the sample is fully stretched. The rearrangement and orientational process of the domains is quantified and compared to the parallel and perpendicular uniaxial stress–strain deformations of a monodomain sample. The stress–strain behaviour of the polydomain lays between the uniaxial deformations, parallel and perpendicular to the director, of the monodomain sample.
Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.
Colloidal quantum dots are well‐established probes for quantum optical experiments. However, they possess a limited stability toward their environment. Herein, the generation of hybrid particles composed of a high optical quality quantum dot centered in a polymer particle by means of a miniemulsion polymerization procedure is reported. This embedding strongly enhances emission intensity and photochemical stability of these single‐photon emitters. At the same time, their colloidal mobile nature is not compromised.
