Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.
A series of novel biodegradable random copolymers of 5‐benzyloxy‐1,3‐dioxan‐2‐one (5‐benzyloxy‐trimethylene carbonate, BTMC) and glycolide were synthesized by ring‐opening polymerization. The copolymers were characterized by nuclear magnetic resonance (NMR) spectroscopy and gel permeation chromatography (GPC). The incorporation of BTMC units into the copolymer chains results in good solubility of the polymers in common solvents. The in vitro degradation rate can be tailored by adjusting the composition of the copolymers.
The in vitro degradation of the homopolymers and poly(BTMC‐co‐GA) copolymers. 相似文献
We demonstrate spatially controlled photoreactions within bicompartmental microparticles and microfibers. Selective photoreactions are achieved by anisotropic incorporation of photocrosslinkable poly(vinyl cinnamate) in one compartment of either colloids or microfibers. Prior to photoreaction, bicompartmental particles, and fibers were prepared by EHD co‐jetting of two compositionally distinct polymer solutions. Physical and chemical anisotropy was confirmed by confocal laser scanning microscopy, Fourier‐transformed infrared spectroscopy, and scanning electron microscopy. The data indicate adjustment of polymer concentrations of the jetting solutions to be the determining factors for particle and fiber structures. Subsequent exposure of poly(vinyl cinnamate)‐based particles and fibers to UV light at 254 nm resulted in spatially controlled crosslinking. Treatment of the crosslinked bicompartmental colloids with chloroform produced half‐moon shaped objects. These hemishells exhibited a distinct porous morphology with pore sizes in the range of 70 nm. Based on this novel synthetic approach, Janus‐type particles and fibers can be prepared by EHD co‐jetting and can be selectively photocrosslinked without the need for masks or selective laser writing.
Summary: A new physical method of fabricating hollow spheres from different polymers has been developed. In this method, emulsions were prepared by mixing organic solutions of polystyrene, poly(D ,L ‐lactide‐co‐glycolide) (PLGA), and bacterial poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV), water, and surfactants. The evaporation of solvents at room temperature caused a phase separation that eventually yielded hollow spheres. Molecular weights, concentrations of polymers, and the natures of surfactant and solvent were important aspects of hollow sphere formation and structure. A mechanism for the formation of hollow spheres is proposed based on observations made using an optical microscope equipped with a digital camcorder and using scanning electron microscopy images of hollow spheres obtained under different conditions.
A scanning electron microscopy image of a broken smaller hollow sphere prepared using a 7 wt.‐% polystyrene solution (diameter of the sphere ∼10 micrometers). 相似文献
An amphiphilic biodegradable polymer, poly(aspartic acid‐co‐lactic acid) (PAL), was synthesized by simply heating a mixture of aspartic acid (Asp) and L ‐lactide without additional catalysts or solvents. The unique branched architecture comprising succinimide units and lactic acid units was confirmed by IR and NMR spectroscopy. A copolymer of sodium aspartate and lactic acid (PALNa) was prepared by reacting PAL with an aqueous sodium hydroxide solution. The PAL was soluble in many organic solvents, while the PALNa was soluble in methanol and water. The hydrolytic degradation behavior of PAL varied with the copolymer composition. A higher Asp content resulted in a faster molecular weight decrease, and introducing glycolic acid units accelerated the degradation rate.
This study reports a spontaneous selective localization of molecules in crosslinked particles during electrospraying and electrospinning polymer solutions containing the particles. It provides a facile way of preparing microcapsules and fibers with controlled release. The dye molecules were phase separated from the crystalline polymer matrix during the electrohydrodynamic process and moved to the solvent‐rich crosslinked particles. The position of the particles in the microcapsules and fibers could be controlled by adjusting compatibility of the particles with the matrix polymer. The microcapsules and fibers did not show the initial burst release of the molecules and gave considerably prolonged release behavior.
Monodisperse poly(D ,L ‐lactide) (PDLLA) microspheres have been prepared by dispersion polymerization of D ,L ‐lactide with a synthetic polymeric stabilizer. The polymerization is carried out in xylene/heptane (1:2, v/v) at 368 K for 3 h with poly[(dodecyl methacrylate)‐co‐(2‐hydroxyethyl methacrylate)] (P(DMA‐co‐HEMA)). P(DMA‐co‐HEMA) has hydroxy groups as an initiation group for pseudoanionic dispersion polymerization. The particle diameter and the coefficient of variation concerning the diameter distribution of the obtained PDLLA microspheres are 3.9 µm and 4.3%, respectively. In addition, from the results of dynamic light scattering measurements, it is found that P(DMA‐co‐HEMA) and the PDLLA‐grafted copolymer form a micellar structure in solution.
We report syntheses of phenylene‐, biphenylene‐, and terphenylene‐layered polymers with a xanthene scaffold by the modified Suzuki‐Miyaura coupling reaction. Their optical properties were studied in detail. The polymer end‐capped by nitrobenzene units, which act as fluorescence quenchers, exhibited the photo‐excited energy transfer from the layered oligophenylenes to the terminal units.
A novel α,ω‐heterofunctional poly(ethylene oxide) (PEO) macromonomer possessing methacryloyl and thienyl end groups was prepared by ring‐opening polymerization of ethylene oxide initiated by potassium thienylethoxide and termination of the living PEO ends with methacryloyl chloride. Incorporation of methacryloyl and thienyl groups was confirmed by free‐radical and oxidative polymerization processes, respectively, and by means of 1H NMR analysis.
Summary: Novel crosslinked porous particles based on the ionic copolymer of 1,1,3,3‐tetramethylguanidine acrylate (TMGA) and N,N‐methylenebisacrylamide (MBA) were prepared via an inverse suspension polymerization using cyclohexane as continuous phase and Span 60 as the dispersant. The SO2 absorption–desorption properties of the P(TMGA‐co‐MBA) particles were studied for the first time. The particles showed excellent SO2 absorption properties: high capacity and rate. These absorption properties, as well as the particle volume, shape, and morphology, remained unchanged during the SO2 absorption–desorption cycles. The material appeared to be a good candidate as SO2 absorbent for fuel gas desulfurization (FGD) and purification of other SO2‐containing gases.
Optical microscope image of the P(TMGA‐co‐MBA) porous particles. 相似文献
The use of poly(lactide)‐based materials is, in part, limited by their physical and mechanical properties. This article reviews the methods that have been employed to enable enhancement of the materials properties through synthetic manipulation of the polymer structure including block copolymer synthesis and modification of the lactide monomer structure, focusing on the application of ring‐opening polymerization. In turn the effect of these structural modifications on the properties of the resultant materials are reported.
Summary: A class of new, soluble, π‐conjugated polymers containing a fumaronitrile unit in the main chain were synthesized by the reaction between di(4‐bromophenyl)fumaronitrile and bis(2,2‐dimethylpropane‐1,3‐diyl)‐1,4‐dialkoxyphenylene‐2,5‐diborate employing palladium catalysts. All the polymers were photoluminescent and electrochemically active.
The new soluble π‐conjugated polymers 1a – d with photoluminescence and electrochemical activity synthesized here. 相似文献
We herein develop a facile catalyst‐free method to prepare hyperbranched hydroxyl‐enriched aliphatic polycarbonate according to SCROP strategy. PEG‐attached multiarm hyperbranched copolymer HEHDO‐star‐mPEG was further designed. It was found that HEHDO‐star‐mPEG can self‐assemble into supramolecular multimolecular micelles in water. HEHDO‐star‐mPEG micelle showed excellent stability with respect to micellar size upon dilution, and displayed good cell‐biocompatibility. An anticancer drug of doxorubicin with hydrogen‐bonding functionality was incorporated into obtained micelles to establish a drug delivery system model. A high drug‐loading content as well as sustained release pattern for HEHDO‐star‐mPEG based delivery system was achieved.
Nonlinear optical vinyl polymers with high glass transition temperature (Tg) were prepared by the functionalization of a fluorinated acrylate‐methyl vinyl isocyanate copolymer. A modified pathway to obtain a thiophene bridged chromophore was worked out. Poled films of the polymers show a fairly high and stable nonlinear optical response, even at elevated temperatures.
The thiophene‐bridged chromophore, based on a substituted dicyanomethylene‐dihydrofuran acceptor, synthesized here. 相似文献
Summary: Tetraaniline‐block‐poly(L ‐lactide) diblock oligomers are synthesized via ring‐opening polymerization. The diblock oligomers cast from an L ‐lactide selective solvent (chloroform) show spherical aggregates for the leucoemeraldine state, and ring‐like structures that are composed of much smaller spherical aggregates for the emeraldine state. The formation mechanisms of the two different surface morphologies are discussed in detail.
Surface morphology changes induced by oxidation of the aniline segment of tetraaniline‐block‐poly(L ‐lactate) and drying effects. 相似文献
Reversible addition fragmentation chain transfer (RAFT) polymerization is one of the most extensively studied reversible deactivation radical polymerization methods for the production of well‐defined polymers. After polymerization, the RAFT agent end‐group can easily be converted into a thiol, opening manifold opportunities for thiol modification reactions. This review is focused both on the introduction of functional end‐groups using well‐established methods, such as thiol‐ene chemistry, as well as on creating bio‐cleavable disulfide linkages via disulfide exchange reactions. We demonstrate that thiol modification is a highly attractive and efficient chemistry for modifying RAFT polymers.
A novel, pyrene‐functionalised copolymer has been synthesised in a single step via imidisation of poly(maleic anhydride‐alt‐1‐octadecene) with 1‐pyrenemethylamine, and its potential for the detection of volatile nitro aromatic compounds (NACs) evaluated. The new copolymer forms complexes in solution with NACs such as 2,5‐dinitrobenzonitrile, as shown by 1H NMR, UV‐vis and fluorescence spectroscopy. Moreover, thin films of this copolymer, cast from THF solution, undergo almost instantaneous fluorescence quenching when exposed to the vapour of 2,5‐dinitrobenzonitrile (a model for TNT) at ambient temperatures and pressures.
Two poly(p‐phenylenevinylene) derivative alternating copolymers ( P1‐I and P2‐I ) have been prepared featuring iodo substituents and m‐phenylene units to periodically disrupt conjugation. P1‐I was derivatized with various chromophores to yield P1a‐f . In P1a‐f , the chromophores were positioned within a sterically protected pocket shielding them from interchain interactions so that intrachain interactions between polymer segments could be observed. Solution and film properties of polymers have been examined. Post‐polymerization chromophore modification leads to new photophysical properties such as intramolecular charge transfer and fluorescent resonance energy transfer processes in some cases.
A novel chlorotitanium calix[4]arene complex was synthesized and tested, without activator, as catalyst for the polymerization of L ‐ and rac‐lactide under solvent‐free conditions. The catalyst displayed high activity, which depended on the monomer‐to‐catalyst molar ratio, and led to highly isotactic PLLA. Despite concomitant transesterification during the polymerization, polylactide formation was well‐controlled, the molar mass distribution indexes remaining in the restricted range of 1.2–1.4.
PVA/SWNT dispersions yield aloe plant‐like crystals, where the leaves are single crystals templated by PVA coated SWNT. Longer growth times (≈18 months) lead to hexagonal rod‐like crystals. HR‐TEM images show evidence that PVA molecules are aligned parallel to the SWNT axis. WAXD, electron diffraction, and HR‐TEM observations of these aloe plant and hexagonal crystals suggests evidence for possible PVA‐SWNT epitaxy. Wide‐angle and electron diffraction data of these crystals also show that the structure seems to mimic the 2D hexagonal crystal packing of SWNT. PVA lattice images and moiré fringes were also observed in the leaf‐like crystals.
