Summary: A new crystal morphology (δ form) of poly(3‐hydroxypropionate) (PHP) is found in cast and melt‐crystallized PHPs with low molecular weight, in which the PHP chains possibly adopt a 21 helix rather than the trans conformation found in the β or γ form. The fusion temperature‐ and the crystallization temperature‐dependent polymorphism are responsible for the dual morphologies and the unique growth kinetics of spherulites in the melt‐crystallized PHPs.
a) A dual‐morphology developed at 70 °C in PHP films after melting at 117 °C and b) that formed during cooling at a rate of 1 °C · min−1 from 130 °C. 相似文献
A novel monomer, 1‐(acryloyloxy)propan‐2‐yl phosphoryl dichloride, was synthesized and characterized in this work. Thereafter, the monomer was neutralized with sodium hydroxide and copolymerized with sodium acrylate to obtain a superabsorbent polymer. The superabsorbent polymer was then modified to improve its swelling properties (i.e., the water absorbency under load, the hydrogel strength, the resilience and the dispersion). Both single factor and orthogonal design experiments were adopted to obtain optimal conditions. The superabsorbent polymer prepared under the optimal conditions showed improved water absorbency in physiological saline [17 g · g?1 under load (P = 2 × 103 Pa) and 65 g · g?1 at atmospheric pressure] and other swelling properties, such as hydrogel strength, resilience and dispersion, also improved.
Well‐defined PEO‐b‐PMMA was prepared, initiated by macroinitiator PEO‐Br, by means of ATRP, where esterification of the terminal hydroxyl group of PEO with 2‐bromoisobutyryl bromide yielded a macroinitiator PEO‐Br. Highly ordered microporous films (hexagonal pattern) were constructed by emulsion micelles of such amphiphilic diblock copolymer formed from a solution with CHCl3/H2O/THF = 100:5:10 (v/v). We also constructed the microporous films using diblock copolymer by the current water‐assisted method.
We applied 1,3‐dipolar cycloaddition to bind ethynylferrocene onto 6I‐azido‐6I‐deoxycyclomaltoheptaose under microwave assisted conditions. The process was investigated by 1H NMR, FT‐IR spectroscopy, and MALDI‐TOF mass spectrometry. The ability of the synthesized compound to self‐organize to cyclic supramolecular structures was investigated by dynamic light scattering measurements and cryo‐transmission electron microscopy.
Summary: An enzymatic one‐pot procedure has been developed for the synthesis of difunctional polyesters containing terminal thiols and acrylates. Candida antarctica lipase B was used as a catalyst for the ring‐opening polymerization of ω‐pentadecalactone. The polymerization was initiated with 6‐mercaptohexanol, then terminated with γ‐thiobutyrolactone or vinyl acrylate to create two types of difunctional polyesters with a very high content of thiol‐thiol or thiol‐acrylate end‐groups.
Synthesis of a water‐soluble polydiacetylene has been achieved by topochemical polymerization in the solid state of the bis(N‐methylimidazolium)diacetylene monomer. Structural characterization for the monomer by X‐ray diffraction and NMR spectroscopy supports a photopolymerization initiated at the surface. Characterization of the polymer (NMR, UV and Raman spectroscopy, and dynamic light scattering) is given along with a molecular modelling interpretation of the polymerization in the solid state.
Large scale of well‐ordered macroporous π‐conjugated polymer monoliths have been successfully prepared through a new approach using micrometer‐sized naphthalene crystals as templates. The macroporous monoliths of poly(p‐phenylenevinylene) (PPV) and poly(p‐phenyleneethynylene) (PPE) grew along the unidirectional freezing direction inside the template naphthalene crystals which lead to the formation of controlling morphologies and homogeneous diameters. The polymer monoliths show straight and lamella macroporous structures. The diameters of pores and the thickness of pore walls can be controlled by tuning the freezing temperature.
Summary: A new approach is introduced to create submicrometer patterned surfaces using multilayer polymer films that contain alternating layers of two polymers, linear low‐density polyethylene (LLDPE) and ethylene‐co‐(acrylic acid) copolymer (EAA). Patterned templates have been prepared by microtoming the multilayer molded sheets. Regionally confined chemical functionality is confirmed by grafting an amine‐terminated biotin and adsorbing streptavidin specifically on the alternating layers of EAA.
Fluorescence micrograph of the Alexa488‐streptadivin patterned polymer surface. 相似文献
Films of an α‐cyclodextrin/poly(ε‐caprolactone) inclusion complex have been successfully prepared and show high transparency and heat resistance in comparison to the pure polymer film. The physical properties, such as transparency, mechanical properties, and thermal stability, of the α‐CD‐PCL‐IC films are found to depend on the α‐cyclodextrin‐to‐polymer stoichiometry.
Melts of symmetric three‐arm stars are generated using a novel iterative method. In this method, an equilibrated low molecular weight configuration is used to generate progressively higher molecular weights by affine scaling and equilibration. At each stage in the progression, the synthetically lowered entanglement density allows bypassing of the exponentially large relaxation times of branched polymers. The quality of equilibration was assessed by measuring the mean dimensions, distribution of dimensions, and internal length scales of the polymers. The total time required to generate the progression of equilibrated configurations was seen to scale as the Rouse time of the highest molecular weight.
4‐Vinylbenzoyl azide was synthesized from p‐vinylbenzoic acid and polymerized by free radical polymerization. The obtained polymer contained acyl azide groups which were thermally transformed to the corresponding isocyanato groups. Reactions on these polymers with ethanol, hydroxyethyl methacrylate and 1‐pyrenebutanol proceeded quantitatively. Time‐resolved FT‐IR studies of the reactions with ethanol were carried out by varying the concentration and temperature. The effect of the solvent polarity on the Curtius rearrangement was investigated.
Summary: A pH‐sensitive block copolymer is synthesized by step polymerization and its pH‐sensitive micellization‐demicellization behavior is studied. This polymer has a hydrophilic MPEG (shell) and hydrophobic but pH‐sensitive poly(β‐amino ester) (core), which can form a self‐assembled micelle. As confirmed by fluorescence spectroscopy and dynamic light scattering (DLS), this polymer shows a sharp pH‐sensitive micellization‐demicellization behavior. It is confirmed that the pH sensitivity is affected by the molecular weight ratio between the MPEG and poly(β‐amino ester).
Plots of the intensity ratio I337/I334 (from pyrene excitation spectra): a) vs. pH for copolymer samples and b) vs. log (concentration) for M1. 相似文献
Phosphorescent conjugated polymers consisting of alternating p‐phenylene‐ethynylene and ‘para‐’ or ‘meta‐type’ Pt(II)‐salphen luminophore units have been synthesized. Side‐arms bearing different substituents (n‐alkoxy and acetylated‐sugar) have afforded contrasting emission properties that are attributed to the polymer conformation, extent of π‐stacking interactions and differences in chemical structure. Intriguing selectivity in luminescent sensing of metal ions has been observed.
A method for the preparation of well‐defined crystallites of MgCl2‐supported Ziegler‐Natta catalysts on Si wafers has been developed. This has been achieved by the spin‐coating of a MgCl2 solution onto a flat Si wafer, followed by controlled crystal growth to give well‐defined MgCl2 · nEtOH crystallites. The growth of the crystallites on the flat silica facilitates their characterization using electron and scanning probe microscopy. The relative proportions of 120° and 90° edge angles indicate the preference for the formation of a particular crystallite face for the MgCl2. Polyethylene has been identified to be formed on the lateral faces of the crystallite.
An isotropic melt of a chiral side‐chain polymethacrylate was studied by electric birefringence technique. A phase transition between two different isotropic phases was detected by Kerr effect and confirmed by WAXS measurements. The obtained experimental data can explain the previously reported bistable phase behavior of the polymer, as conventional Sm A phase is formed in slow cooling whereas a TGB‐like, optically isotropic mesophase in fast cooling.
Summary: Thermosensitive polymer nanotubes can be fabricated within an aminopropylsilane‐modified porous anodic aluminum oxide membrane by surface‐initiated atom transfer radical polymerization (ATRP) followed by template removal. DSC experiments prove that the synthesized PNIPAM‐co‐MBAA copolymer nanotubes have a reversible thermosensitive behavior. The temperature‐induced changes in dimension and shape of the nanotubes were studied by AFM in real time in an aqueous environment. It indicates that the nanotubes undergo a shape alteration from an “ellipse” to “circular” shape in water upon heating to LCST or above.
We report for the first time the preparation of single polypyrrole (PPy) molecule chains using a “metal‐organic framework” with 1 nm channels as a template. The obtained one‐dimensional (1‐D) PPy has highly structure order and excellent conductivity, which has improved by as much as five orders of magnitude in comparison with that of 2‐D PPy.
