Polyelectrolytes Revisited: Reliable Determination of Intrinsic Viscosities

The linear extrapolation of (η − η₀)/(η₀c) towards c → 0 constitutes the basis of traditional methods to determine intrinsic viscosities [η], where η is the viscosity of polymer solutions of concentration c and η₀ is the viscosity of the pure solvent. With uncharged macromolecules this procedure works well; for polyelectrolytes it fails because of the pronounced non‐linearity of the above dependence at high dilution resulting from the increasing electrostatic interactions. This contribution presents a new method for the determination of [η]. It rests upon the application of the laws of phenomenological thermodynamics to the viscosity of polymer solutions and introduces a generalized intrinsic viscosity enabling a comparison of differently charged and uncharged polymers.

     

Multiphase‐Separated Polyurethanes Studied by Micro‐Raman Spectroscopy

Micro‐Raman spectroscopy has been used to investigate the chemical micro‐heterogeneity of multiphase‐separated poly(ether urethanes) (PETU). Analysis of PETU cross‐sections by means of micro‐Raman spectroscopy revealed the nearly complete absence of soft segments in AI aggregates (called globules). These aggregates are in the order of a few micrometers in size. The composition of the matrix and the AII aggregates (spherulites) was comparable.

Example of an AFM image (sample 706, scan size 25 μm, converted to monochromatic image).     

Synthesis and Characterization of α,ω‐Heterofunctional Poly(ethylene oxide) Macromonomers

A novel α,ω‐heterofunctional poly(ethylene oxide) (PEO) macromonomer possessing methacryloyl and thienyl end groups was prepared by ring‐opening polymerization of ethylene oxide initiated by potassium thienylethoxide and termination of the living PEO ends with methacryloyl chloride. Incorporation of methacryloyl and thienyl groups was confirmed by free‐radical and oxidative polymerization processes, respectively, and by means of ¹H NMR analysis.

     

Highly Efficient and Well‐Controlled Ambient Temperature RAFT Polymerization under Solar Radiation

Highly efficient and well‐controlled ambient temperature reversible addition–fragmentation chain transfer (RAFT) polymerization is readily carried out under environmentally friendly mild solar radiation. This discovery has significantly extended studies from man‐made separated‐spectroscopic‐emission UV‐vis radiation (Macromolecules 2006 , 39, 3770) to natural continuous‐spectroscopic‐emission solar radiation for ambient temperature RAFT polymerization.

     

A New Type of Thermoresponsive Copolymer with UCST‐Type Transitions in Water: Poly(N‐vinylimidazole‐co‐1‐vinyl‐2‐(hydroxymethyl)imidazole)

1‐Vinyl‐2‐(hydroxymethyl)imidazole ( 2 ) is synthesized by a procedure described in the literature. Corresponding copolymers with upper critical solution temperature (UCST)‐type transitions in water and high‐glass transition temperatures (T_g) are prepared by free radical copolymerization with N‐vinylimidazole ( 1 ). Depending on the copolymer composition, the cloud point can be varied between 19 and 41 °C. As the copolymer composition is identical with the monomer feed ratio, the cloud point can be easily tuned in the desired range. Furthermore, a distinctive pH‐dependence and salt effect can be observed.

     

Mechanism of Conjugated Polymer Organization on SWNT Surfaces

Summary: The interactions between poly{(2,6‐pyridinylenevinylene)‐co‐[(2,5‐dioctyloxy‐p‐phenylene)vinylene]} (PPyPV) and SWNTs have been investigated using UV‐Vis absorption spectroscopy. The SWNTs promoted polymer organization. PPyPV is a Lewis base and can be doped by strong and weak Lewis acids. The basicity strength of the PPyPV depended on the polymer interchain interactions, which were enhanced by the presence of SWNTs. As the SWNT concentration was increased, an increment in the K_b of PPyPV was observed.

     

Co‐Continuous Polymeric Nanostructures via Simple Melt Mixing of PS/PMMA

Blends of polystyrene/poly(methyl methacrylate) (PS/PMMA) (30/70) prepared by simple melt mixing form a droplet (PS) in‐matrix (PMMA) morphology. It is found that addition of a carefully designed copolymer PS‐b‐P(S‐ran‐MMA) (SSM) compatibilizer could convert the morphology into a co‐continuous system. Indeed, the continuity of the dispersed PS phase increased with an increase in PS‐b‐P(S‐ran‐MMA) content, and a fully co‐continuous morphology (continuity = 100%) was obtained at 20% SSM fraction with a characteristic size of 100 nm.

     

Submicron Polymer Gratings: Optical Diffraction and Spontaneous Brillouin Scattering

Summary: Brillouin light scattering (BLS) from submicron‐size patterned polyurethane (PU) films was found to display rich spectral features. Their identification allows the determination of the mechanical properties of the PU and the characterization of the periodicity and the coherence of the structure. A temperature‐dependent study demonstrates that BLS is a sensitive tool to monitor changes of the mechanical properties and/or of the morphology.

(a) Scheme of the sample structure and the scattering geometry, (b) SEM top view of the PU features.     

Synthesis of Well‐Defined Rod‐Coil‐Rod Polyhexylisocyanate‐block‐polystyrene‐block‐polyhexylisocyanate via One‐Pot Anionic Polymerization

A rod‐coil‐rod block copolymer, polyhexylisocyanate‐block‐polystyrene‐block‐polyhexylisocyanate, of controlled molecular weight was synthesized quantitatively via living anionic polymerization using potassium naphthalenide in the presence of sodium tetraphenylborate. The use of K⁺ as the counterion for the polymerization of styrene, and Na⁺ (NaBPh₄) for the polymerization of isocyanate leads to the formation of a well‐controlled novel triblock copolymer.

     

Porous Protein‐Based Nanoparticle Hydrogel for Protein Chips with Improved Sensitivity

We have discovered a novel method to prepare a protein‐based hydrogel, that is, a ‘three‐dimensional nanostructured protein hydrogel’ (3D NPH), which is composed of loosely inter‐connected protein–polymer hybrid nanoparticles. The 3D NPH can be easily prepared by spotting a protein/polymer mixture on a substrate. Surprisingly, gold nanoparticles carrying protein molecules easily diffuse into the 3D NPH through pores and spaces. We have shown that the protein chip made by our 3D NPH method has tremendously improved sensitivity in detecting protein–protein interactions compared with that by direct protein immobilization methods.

     

Preparation of Antimicrobial Ultrafine Cellulose Acetate Fibers with Silver Nanoparticles

Summary: A feasible method for the preparation of antimicrobial ultrafine fibers with silver nanoparticles was developed by direct electrospinning of a cellulose acetate (CA) solution with small amounts of silver nitrate followed by photoreduction. Silver nanoparticles in ultrafine CA fibers were stabilized by interactions with carbonyl oxygen atoms in CA. Ultrafine CA fibers with silver nanoparticles showed very strong antimicrobial activity.

TEM image of an ultrafine CA fiber electrospun from 10 wt.‐% CA solution with 0.5 wt.‐% AgNO₃.     

Polytellurophenes

Will polytellurophenes bridge the gap between conjugated polymer and inorganic solid‐state semiconductors? Polytellurophenes are a virtually unexplored class of conjugated polymer. In this paper, the synthetic methodologies that have been used to prepare polytellurophenes are chronicled. The properties of the resulting polymers are discussed and their potential for use as electronic materials is evaluated. It is far too early to know if these materials will lead to a useful class of thin‐film semiconductors, however some key challenges associated with their synthesis and implementation are outlined. These challenges will need to be addressed as the conjugated polymer research community begins to utilize this area of the periodic table.

     

Fluorescence Investigations of Oxygen‐Doped Simple Amine Compared with Fluorescent PAMAM Dendrimer

Blue emission of oxygen‐doped tertiary amine (triethylamine), a key unit of fluorescent poly(amido amine) dendrimer, was demonstrated. It was found that the fluorescence intensity could be further enhanced if the tertiary amines locate densely in the dendrimer interior as the branching sites. Moreover, a solvatochromic phenol blue, instead of oxygen, is able to induce the blue fluorescence of the tertiary amino‐branching sites based on a guaranteed host‐guest complexation of phenol blue molecules and dendrimer interior.

     

Synthesis and Self‐Assembly of Amphiphilic Diblock Copolymers using a Fluorescently Labeled N‐Alkoxyamine Initiator

Summary: An initiator for nitroxide mediated ‘living’ free radical polymerization was prepared with a fluorescent tag attached to the initiating alkyl radical terminus. This was used to synthesize amphiphilic poly(acrylic acid)‐block‐polystyrene diblock copolymers, which self assembled in a tetrahydrofuran/buffer solution to form structures that are visible by fluorescence.

     

Microwave Accelerated Polymerization of 2‐Phenyl‐5,6‐dihydro‐4H‐1,3‐oxazine: Kinetics and Influence of End‐Groups on Glass Transition Temperature

Summary: The ring‐opening polymerizations of 2‐phenyl‐5,6‐dihydro‐4H‐1,3‐oxazine (PhOZI) with methyl tosylate (MeOTs) and butyl iodide (BuI) as initiators were performed in refluxing butyronitrile. Reaction kinetics under microwave irradiation was compared with conventional oil bath heating. The polymerization rates, under microwave irradiation, showed an acceleration by a factor of 1.8 (independently from the used initiator). The investigation of the thermal properties of the obtained poly(N‐benzoyl‐trimethyleneimine) showed the influence of molecular weight and end‐groups on the glass transition temperature.

The ring‐opening polymerizations of 2‐phenyl‐5,6‐dihydro‐4H‐1,3‐oxazine performed in refluxing butyronitrile.     

Binding and Sulfonation of Poly(acrylic acid) on Iron Oxide Nanoparticles: a Novel,Magnetic, Strong Acid Cation Nano‐Adsorbent

Summary: A novel, magnetic, strong acid cation nano‐adsorbent has been developed by the covalent binding of poly(acrylic acid) on the surface of Fe₃O₄ nanoparticles followed by sulfonation using sulfanilic acid via carbodiimide activation. The nano‐absorbent can be easily recovered or manipulated with an external magnetic field and shows a good capacity for the rapid and efficient adsorption of multivalent metal cations from aqueous solutions.

An illustration for the binding and sulfonation of PAA on Fe₃O₄ nanoparticles to produce a magnetic, strong acid cation nano‐adsorbent.