Summary: A modified random phase approximation method with a cumulant expansion for the semi‐flexible structure factor of diblock copolymers was exercised to describe the phase separation behavior of semi‐flexible and polydisperse diblock copolymers. Scattering curves and spinodal diagrams were calculated applying monomer specific input parameters. The influence of polydispersity was included applying basic concepts of mathematical statistics utilizing several probability density distributions in the case of the two single blocks. In contrast to semi‐flexibility, the main effect of polydispersity was found to shift the spinodal up, thus to enlarge the range of existence of the homogeneous phase.
Twofold Schultz‐Zimm distribution of diblock copolymers. 相似文献
A series of novel pH‐ and temperature‐responsive diblock copolymers composed of poly(N‐isopropylacrylamide) (PNIPAM) and poly[(L ‐glutamic acid)‐co‐(γ‐benzyl L ‐glutamate)] [P(GA‐co‐BLG)] were prepared. The influence of hydrophobic benzyl groups on the phase transition of the copolymers was studied for the first time. With increasing BLG content in P(GA‐co‐BLG) block, the thermal phase transition of the diblock copolymer became sharper at a designated pH and the critical curve of phase diagram of the diblock copolymer shifted to a higher pH region. Notably, when the BLG content in P(GA‐co‐BLG) block was more than 30 mol.‐%, the diblock copolymer responded sharply to a narrow pH change in the region of pH 7.4–5.5.
Well‐defined diblock condensation copolymers composed of an aromatic polyamide and an aromatic polyether have been synthesized by means of successive chain‐growth condensation polymerizations. Polymerization of a polyamide monomer with an orthogonally difunctional initiator is accompanied with side reactions. On the other hand, polymerization with a monofunctional initiator afforded well‐defined polyamide, which has been converted into a macroinitiator by introduction of a terminal 4‐fluorobenzophenone unit. Well‐defined diblock copolymers are obtained by polymerization of a polyether monomer in the presence of this macroinitiator.
Summary: The influence of surface morphologies on the properties of materials is of essential importance and is therefore a widely discussed topic. In the present contribution, the properties of a set of diblock copoly(2‐oxazoline)s are analyzed in terms of their individual morphologies, which have been investigated with tapping‐mode SFM. This collection of diblock copolymers consists of 12 diblock copolymers and four corresponding homopolymers, representing a complete 16‐membered library of (co‐) poly(2‐oxazoline)s, composed of four differently substituted 2‐oxazoline monomers. For the investigated set of compounds, a correlation between the morphologies of the spin‐coated films and their surface energies could be determined.
Morphologies of spin‐coated films of a library of diblock copoly(2‐oxazoline)s and their correlation to the corresponding surface energies. 相似文献
Summary: An initiator for nitroxide mediated ‘living’ free radical polymerization was prepared with a fluorescent tag attached to the initiating alkyl radical terminus. This was used to synthesize amphiphilic poly(acrylic acid)‐block‐polystyrene diblock copolymers, which self assembled in a tetrahydrofuran/buffer solution to form structures that are visible by fluorescence.
Summary: Various (meth)acrylamides were synthesized in good yields directly from (meth)acrylic acid and an amine using microwave irradiation in a solvent‐free environment. Under the applied conditions the (meth)acrylic function is preserved. Furthermore, the addition of an initiator like 2,2′‐azoisobutyronitrile (AIBN) to the starting mixture leads directly to poly(meth)acrylamides in a single step.
General reaction scheme for the formation of poly(meth)acrylamides from the microwave‐assisted reaction of (meth)acrylic acid and various amines. 相似文献
Two new “H” type of indole‐based chromophores were designed and successfully introduced to the polymeric system, the resultant polymers demonstrated enhanced NLO effects, good processability, thermal stability and nearly excellent transparency, indicating the advantages of “H” type chromophore moieties. And they could be promising candidates for the practical applications as new photonic materials.
Based on their rigid‐rod structure all‐conjugated, rod‐rod block copolymers show a preferred tendency to self‐assemble into low‐curvature vesicular or lamellar nanostructures independent from their specific chemical structure and composition. This unique and attractive behaviour is clearly illustrated in a few examples of such all‐conjugated block copolymers. The resulting nanostructured heteromaterials may find applications in electronic devices or artificial membranes.
Summary: The polymerization of ε‐caprolactone (CL) in the presence of HCl · Et2O by an activated monomer mechanism was performed to synthesize diblock or triblock copolymers composed of poly(ethylene glycol) (PEG) and poly(ε‐caprolactone) (PCL). The obtained PCLs had molecular weights close to the theoretical values calculated from the CL to PEG molar ratios and exibited monomodal GPC curves. We successfully prepared PEG and PCL block copolymers by a metal‐free method.
The non‐metal catalyzed living ring‐opening polymerisation of ε‐caprolactone by PEG. 相似文献
Well‐defined polymethylene‐block‐polystyrene (PM‐b‐PS) diblock copolymers were synthesized via a combination of living polymerization of ylides and atom transfer radical polymerization (ATRP) of styrene. A series of hydroxyl‐terminated polymethylenes (PM‐OHs) with different molecular weight and narrow molecular weight distribution were prepared using living polymerization of ylides following efficient oxidation in a quantitive functionality. Then, the macroinitiators (PM‐MIs ( = 1 900–15 000; PDI = 1.12–1.23)) transformed from PM‐OHs in ≈ 100% conversion initiated ATRPs of styrene to construct PM‐b‐PS copolymers. The GPC traces indicated the successful extension of PS segment ( of PM‐b‐PS = 5 000–41 800; PDI = 1.08–1.23). Such copolymers were characterized by 1H NMR and DSC.
We examine stochastic computer simulations of the Leibler‐Ohta‐Kawasaki (LOK) phase‐field model 1 , 2 and demonstrate that long‐wavelength line edge roughness (LER) and line width roughness (LWR) in a lamellar diblock copolymer resist depend monotonically on quench depth and noise strength, and that the LER and LWR spectra both exhibit a peak at k0–the characteristic wavenumber of mesophase separation in diblock copolymers. For k ⪅ k0, we find that the LER spectrum approximately scales like k−1.6. These observations are consistent with previous theoretical, computational, and experimental examinations LER and LWR in diblock copolymer melts, and thus the LOK phase‐field model should be considered a capable and appropriate framework for future examination of long‐wavelength LER and LWR in block copolymer resist systems.
A trithiocarbonate RAFT agent was modified with a pyridyl disulfide group and used in the direct synthesis of endgroup pyridyl disulfide‐functionalized homo‐ and amphiphilic block copolymers of oligo(ethyleneglycol) acrylate (PEG‐A) and butyl acrylate (BA). Both the homo‐ and copolymerizations were found to be well controlled via the RAFT mechanism. The NMR analysis indicated that both the homopolymers of PEG‐A and the amphiphilic diblock copolymers of PEG‐A and BA possessed pyridyl disulfide terminal groups. A UV‐Vis absorption test revealed that the pyridyl disulfide endgroup of the polymer could be efficiently used to couple thiol‐bearing molecules to the polymer without the need for any post‐polymerization modification. This communication presents the first efficient direct synthesis of thiol‐reactive endgroup‐functionalized well‐defined polymers via the RAFT technique.
Two well‐defined diblock copolymers with quadruple hydrogen‐bonding groups on one block, denoted PSUEA‐1 and PSUEA‐2 , have been synthesized, and novel snowflake‐shaped nanometer‐scale aggregates, self‐assembled by such diblock copolymers in non‐polar solvents, have been observed. The micellar dimensions were investigated by DLLS and SLLS. Their morphologies were studied by TEM. Since the degrees of polymerization of the Upy‐containing blocks of PSUEA‐1 and PSUEA‐2 are quite similar and the polystyrene block of the PSUEA‐1 is longer than that of the PSUEA‐2 , a subtle but identifiable difference between the sizes and structures of the PSUEA‐1 and PSUEA‐2 aggregates was noticed and characterized.
A new versatile synthesis strategy for macromonomers has been developed that uses the living ring‐opening metathesis polymerization (ROMP) with commercial Grubbs first generation ruthenium initiators. Homopolymers as well as diblock copolymers were end‐functionalized with norbornene derivatives to serve as macromonomers. The graft copolymerization of the macromonomers was also carried out employing ROMP. Well‐defined and highly functional graft copolymers are accessible by this new synthetic route.
Well‐defined PEO‐b‐PMMA was prepared, initiated by macroinitiator PEO‐Br, by means of ATRP, where esterification of the terminal hydroxyl group of PEO with 2‐bromoisobutyryl bromide yielded a macroinitiator PEO‐Br. Highly ordered microporous films (hexagonal pattern) were constructed by emulsion micelles of such amphiphilic diblock copolymer formed from a solution with CHCl3/H2O/THF = 100:5:10 (v/v). We also constructed the microporous films using diblock copolymer by the current water‐assisted method.
Dynamic lattice Monte Carlo simulations on a simple cubic lattice were used to study the association behavior of heteroarm star copolymers with two types of chemically different arms (miktoarm star). The effect of architecture and composition (number and length of arms) on self‐assembly was investigated. Simulations revealed substantial differences between associates formed by linear diblock copolymers and by star copolymers. It was also observed that the length of arms considerably influences the association behavior. Apart from the structural characteristics of the whole associate, the properties of individual stars in associates were also studied. These results provide detailed information on the inner structure of associates.
Summary: A series of new polyisoprene‐block‐polylactide and polystyrene‐block‐polylactide diblock copolymers was prepared by combining the living anionic polymerization of isoprene or styrene, and the stereoselective ring‐opening polymerization of rac‐lactide. Aluminum and yttrium‐based polystyrene or polyisoprene macroinitiators yielded isotactic‐stereoblock and heterotactic‐enriched polylactide segments, respectively. A strong influence of the microstructure of the polylactide block on the aggregation properties in solution and morphological behavior of the solid materials in thin films has been observed.
General strategy used for the preparation of the diblock copolymers, illustrated here for poly(isoprene‐block‐lactide). Poly(styrene‐block‐lactide) copolymers were prepared similarly. 相似文献
Summary: A series of helix‐coil diblock copolymers based on poly(ethylene oxide) and optically active helical poly{(+)‐2,5‐bis[4′‐((S)‐2‐methylbutoxy)phenyl]styrene} (PMBPS) were synthesized via atom transfer radical polymerization (ATRP). The synthetic methodology permitted straightforward preparation of the diblock copolymers with relatively low polydispersities and a broad range of compositions and molecular weights. Depending on the composing block length and the initial concentration, the copolymers self‐assembled into different supramolecular structures in aqueous solution, including spherical micelles, vesicles, multilamellar vesicles, large compound vesicles, and tubules.
Schematic representation of the synthesis of PEO‐b‐PMBPS block copolymers and their aggregation in aqueous solution. 相似文献
Well‐defined diblock copolymers composed of poly(N‐octylbenzamide) and polystyrene were synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization of styrene with a polyamide chain transfer agent (CTA) prepared via chain‐growth condensation polymerization. Synthesis of a dithioester‐type macro‐CTA possessing the polyamide segment as an activating group was unsatisfactory due to side reactions and incomplete introduction of the benzyl dithiocarbonyl unit. On the other hand, a dithiobenzoate‐CTA containing poly(N‐octylbenzamide) as a radical leaving group was easily synthesized, and the RAFT polymerization of styrene with this CTA afforded poly(N‐octylbenzamide)‐block‐polystyrene with controlled molecular weight and narrow polydispersity.
Blue‐light‐emitting 2,7‐carbazole‐based conjugated copolymers have been prepared by Yamamoto or Suzuki cross‐coupling reactions. By introducing highly substituted aromatic comonomers, fully soluble high‐molecular‐weight copolymers have been obtained. Moreover, these amorphous polymeric materials exhibit good thermal stability and interesting redox properties. All these features make these new conjugated polymers highly promising for the development of single‐polymer‐layer blue‐light‐emitting diodes.
