Asymmetric addition of phenylacetylene to aldehydes catalyzed by soluble optically active polybinaphthols ligand

A chiral polymer ligand was synthesized by the polymerization of (S)-5,5′-dibromo-6,6′-dibutyl-2,2′-binaphthol (S-M-1) with (S)-2,2′-bishexyloxy-1,1′-binaphthyl-6,6′-boronic acid (S-M-2) via Pd-catalyzed Suzuki reaction. The application of the chiral polymer ligand to the asymmetric addition of phenylethynyl zinc to various aldehydes has been studied. The results show that the soluble chiral polybinaphthols ligand in combination with Et₂Zn and Ti(OⁱPr)₄ can exhibit excellent enantioselectivity for phenylacetylene addition to both aromatic and aliphatic aldehydes. The catalytically active center of the repeating unit S-1 used as a catalyst produced the opposite configuration of the propargylic alcohols to that of S-1, on the contrary, the chiral polymer gave the same configuration as the optically active binaphthol moiety of the polybinaphthols ligand. Moreover, the chiral polymer ligand can be easily recovered and reused without loss of catalytic activity as well as enantioselectivity.     

Chiral diphenylselenophosphoramides: a new class of chiral ligands for the titanium(IV) alkoxide-promoted addition of diethylzinc to aldehydes

Chiral C₂-symmetric diphenylselenophosphoramides 1 and 2 were prepared from the reaction of diphenylselenophosphinic chloride with (1R,2R)-(−)-1,2-diaminocyclohexane and (1R,2R)-(+)-1,2-diphenylethylenediamine, respectively, in high yields. Another novel chiral ligand 3 was prepared from the reaction of diphenylselenophosphinic chloride with (R)-(+)-1,1′-binaphthyl-2,2′-diamine using butyllithium as the base. The ligands were used as catalytic chiral ligands in the titanium(IV) alkoxide-promoted enantioselective addition reaction of diethylzinc to aldehydes.     

Chiral diphenylthiophosphoramides: a new class of chiral ligands for the silver(I)-promoted enantioselective allylation of aldehydes

Chiral C₂-symmetric diphenylthiophosphoramides 1 and 2 were prepared in high yields from the reaction of diphenylthiophosphinic chloride with (1R,2R)-(−)-1,2-diaminocyclohexane and (1R,2R)-(+)-1,2-diphenylethylenediamine, respectively. Another novel chiral ligand 4 was prepared from reaction of diphenylthiophosphinic chloride with (R)-(+)-1,1′-binaphthyl-2,2′-diamine using butyllithium as a base. They were used as catalytic chiral ligands in the silver(I)-promoted enantioselective allylation reaction of aldehydes with allyltributyltin.     

Chiral thiophosphoramide and selenophosphoramide ligands in the Cu(I)-promoted catalytic enantioselective 1,3-dipolar cycloaddition reactions of azomethine ylides and pyrrole-2,5-dione derivatives

Chiral C₂-symmetric diphenylthiophosphoramide ligand L1 prepared from C₂-symmetric (1S,2S)-(−)-1,2-diphenylethylenediamine was found to be a fairly effective chiral ligand for Cu(I)-promoted 1,3-dipolar cycloaddition of imines and pyrrole-2,5-dione derivatives to give the corresponding adducts in moderate enantioselectivities and good yields.     

An efficient synthesis of chiral homophenylalanine derivatives via enantioselective hydrogenation

Chiral homophenylalanine derivatives were synthesized via enantioselective hydrogenation of 5a and 5b catalyzed by rhodium complexes bearing chiral phosphine and phosphinite legands. Enantiomeric excesses up to 96.2% were achieved when S-spiroOP(S-1) was used as a chiral ligand under 500 psi of H₂ pressure in acetone.     

Axially dissymmetric binaphthyldiimine chiral salen-type ligands for copper-catalyzed asymmetric aziridination

Axially dissymmetric chiral salen-type ligands 1–4 and 7 were prepared from the reaction of (R)-(+)-1,1′-binaphthyl-2,2′-diamine with 2,6-dichlorobenzaldehyde, 2,3-dichlorobenzaldehyde, 3,4-dichlorobenzaldehyde or salicylaldehyde in high yields, respectively. The catalytic asymmetric aziridination of alkenes has been examined using these novel chiral ligands. Excellent enantioselectivity in the aziridination of cinnamates has been achieved using the C₂-symmetric chiral ligand 1.     

Synthesis of a chiral N-heterocyclic carbene bearing a m-terphenyl-based phosphate moiety as an anionic N-substituent and its application to copper-catalyzed enantioselective boron conjugate additions

A chiral N-heterocyclic carbene (NHC) ligand 1a bearing a m-terphenyl-based phosphate moiety as an anionic N-substituent has been developed. A rhodium complex [Rh(1a)(cod)]₂ was synthesized and its structure was characterized by NMR and ESI-MS spectroscopy. This ligand gave high enantioselectivities in copper-catalyzed enantioselective boron conjugate additions to an α,β-unsaturated ester to give a chiral β-boryl ester.     

Screening of ligands in the asymmetric metallocenethiolatocopper(I)-catalyzed allylic substitution with Grignard reagents

Screening of metallocenethiolate ligands for copper(I)-catalyzed substitution of allylic acetates with Grignard reagents has been carried out. The previously used ligand, lithium (R,S_p)-2-(1-dimethylaminoethyl)ferrocenylthiolate (4a), possessing both central and planar chirality, was the starting point for the screening. It was found that the diastereomeric ligand lithium (R,R_p)-2-(1-dimethylaminoethyl)ferrocenylthiolate (4b) exhibiting reversed planar chirality gave increased enantioselectivity in the allylic substitution, at least when cinnamyl acetate was used as a substrate. The ruthenocene-based ligand lithium (R,S_p)-2-(1-dimethylaminoethyl)ruthenocenylthiolate (4c) gave an enhanced reaction rate, but lower chiral induction. The use of disulfide bis[(R,S_p)-2-(1-dimethylaminoethyl)ferrocenyl]disulfide (7a) as a ligand precursor worked well but resulted in lower enantioselectivity.     

A new chiral sulfinyl-NH-pyridine ligand for Ir-catalyzed asymmetric transfer hydrogenation reaction

A new flexible C₁-symmetric tridentate ligand (S)-N-(2-(tert-butylsulfinyl)benzyl)-1-(pyridin-2-yl)methanamine sulfoxide (L1) was successfully prepared and utilized as a chiral ligand for Ir(I)-catalyzed ATH (asymmetric transfer hydrogenation) reactions. Without any cooperation of other chiral center, encouraging ee and conversion values have been achieved, which provide us a better understanding on these types of ligands and a new strategy to develop new high-efficiency chiral catalysts for asymmetric reaction.     

2,2′-Bis(diarylstibano)-1,1′-binaphthyls (BINASbs); a useful chiral ligand for palladium-catalyzed asymmetric allylic alkylation, and the structure of a BINASbPdCl2 complex

The first attempt to use enantiopure antimony ligands 1-4 as a chiral auxiliary was successfully accomplished in a palladium-catalyzed asymmetric alkylation of 1,3-diphenylprop-2-ene-1-yl acetate with dimethyl malonate. Under the optimized conditions, the allylation product can be obtained with up to 96% ee in 84% chemical yield by use of enantiopure C₂-symmetric 2,2′-bis[di(p-tolyl)stibano]-1,1′-binaphthyl [BINASb(p-Tol)] 4a as a chiral ligand with O-bis(trimethylsilyl)acetamide (BSA) and potassium acetate. The structure of the intermediary BINASb-PdCl₂ complex was elucidated by single crystal X-ray analysis, implying that the BINASb should work as a bidentate chiral ligand in the reaction.     

Chiral thiophosphoramide catalyzed asymmetric aryl transfer reactions for the synthesis of functional diarylmethanols

In this investigation, chiral thiophosphoramide 3d was easily prepared from chiral (1R,2R)-1,2-diphenylethylenediamine and then applied as an efficient chiral ligand in the catalytic asymmetric arylation reactions of various aromatic aldehydes. The corresponding diarylmethanol products were produced with good to excellent yields (up to 98%) and enantioselectivities (up to 94%). The recovery of chiral ligand 3d could be as high as 96%.     

Resolution of BIPHEP on Rh with a chiral diene auxiliary

Resolution of the atropisomeric chiral BIPHEP ligand on Rh has been achieved with the aid of 2-(4-tert-butyl-phenyl)-8-methoxy-1,8-dimethyl-bicyclo[2.2.2]octa-2,5-diene, a chiral chelating diene ligand. The diene complex 3 containing an (S)-BIPHEP ligand was found to be configurationally stable in CDCl₃ solution at RT. Conversion of the diene complex 3 to a dicarbonyl Rh complex 4 that had a barrier of 25.0 kcal/mol for atropisomerization of the BIPHEP ligand. Preliminary studies of the use of the resolved complex 3 for catalysis are presented.     

Palladium-catalyzed asymmetric allylic substitution using novel phosphino-ester (PHEST) ligands with 1,1′-binaphthyl skeleton

The asymmetric allylic alkylation of rac-1,3-diphenyl-2-propenyl acetate 1 with dimethyl malonate 2a proceeded smoothly in the presence of lithium acetate, BSA (N,O-bis(trimethylsilyl)acetamide), [Pd(η³-C₃H₅)Cl]₂, and the chiral ligand (R)-i-Pr₂N-PHEST (R)-5a to give the allylic alkylation product (R)-3a in 89% yield with 99% ee. Furthermore, the asymmetric allylic amination of 1 with potassium phthalimide 2c has been carried out using the same ligand to give the allylic amination product (S)-3c in 10% yield with 66% ee.     

New axially dissymmetric ligand recoverable with fluorous solvent

Axially dissymmetric ligands with perfluoroalkyl groups, (Ra)-2,2′-bis[(R)-1-hydroxy-1H-perfluorooctyl]biphenyl [(Ra)-(R)₂-1c] and its enantiomer, have been synthesized successfully by the coupling reaction of the corresponding aryl bromide using Ni(COD)₂. These ligands showed much higher asymmetric induction in the reaction of various aldehydes with diethylzinc than the trifluoromethyl (1a) or pentafluoroethyl (1b) analogues. Furthermore, 1c was recovered quantitatively by extraction with a fluorous solvent from the reaction mixture due to its high fluorine content. The recovered ligand 1c was pure enough to be reused without purification. The efficiency of 1c as the chiral ligand was not decreased at all even after seven times recycling.     

Screening of a library of hemisalen ligands in asymmetric H-transfer: Reduction of aromatic ketones in water

A library of chiral hemisalen ligands (30) was realized. The ligands were synthesized by the condensation of salicylaldehyde derivatives with amino-alcohols (amino-indanol or substituted amino-ethanol) and characterized. These ligands associated with ruthenium (II) precursors were tested on the asymmetric transfer hydrogenation (ATH) of aromatic ketones by sodium formate in water. The different substituent pattern on the ligand (electronic and hindrance effects on different positions) as well as the ruthenium precursor were investigated. The best compromise in terms of conversion and chiral induction led to the complex [RuCl₂(mesitylene)]₂ coordinated to (1S,2R)-1-((E)-(3-(dimethyl(phenyl)silyl)-2-hydroxy-5-methoxy benzylidene) amino)-2,3-dihydro-1H-inden-2-ol (L25). It reduces acetophenone in 95% yield and 91% ee in 18 h at 30 °C.     

Synthesis and characterisation of a chiral lanthanoid cluster with an unusually exposed cubane core via concomitant deesterification of ethyl acetate

An unusual chiral lanthanoid cluster has been synthesised and characterised that exhibits a cubane cage motif with a remarkably exposed central core. This discovery stems from the use of a new asymmetric diketone ligand, (Z)-3-hydroxy-3-methyl-1-(1,2:3,4-di-O-isopropylidene-α-d-galactopyranose)prop-2-en-1-one (Hmgp), which incorporates both a methyl terminus and a protected d-galactose moiety to induce chirality. Reaction of this ligand with hydrated holmium chloride results in the formation of a cubane cluster, [Ho₄(μ₃-OH)₄(η²-mgp)₆(μ-η²-mgp)(μ-η²-Ac)(H₂O)₂] (1), which bears seven chiral ligands that form a highly shielded hemisphere and an acetate co-ligand that is postulated to form via deesterification of ethyl acetate.     

The preparation and resolution of 2-phenyl-Quinazolinap,a new atropisomeric phosphinamine ligand for asymmetric catalysis

The preparation and resolution of an axially chiral quinazoline-containing phosphinamine ligand is described. The biaryl linkage was formed in a Pd-catalysed coupling of 4-chloro-2-phenylquinazoline 10 with 2-methoxy-1-naphthylboronic acid 11. Demethylation of the product ether 12 afforded alcohol 13 which was converted into the corresponding triflate 14 by treatment with trifluoromethanesulphonic anhydride. An Ni-catalysed phosphinylation gave the required phosphinamine ligand 9 as a racemate. Diastereomeric palladacycles 16, formed from 9 and (+)-di-μ-chlorobis[(R)-dimethyl(1-(1-naphthyl)ethyl)aminato-C₂,N]dipalladium(II) 15 were separated to give diastereomerically pure materials. An X-ray crystal structure of the (R,R)-16 palladacycle was determined and is discussed. Displacement of the resolving agent by reaction with 1,2-bis(diphenylphosphino)ethane gave enantiopure 2-phenyl-Quinazolinap 9, a new atropisomeric phosphinamine ligand for asymmetric catalysis.     

Chiral ligands derived from abrine. Part 6: Importance of a bulky N-alkyl group in indole-containing chiral β-tertiary amino alcohols for controlling enantioselectivity in addition of diethylzinc toward aldehydes

A number of chiral β-amino alcohols possessing a 3-indolylmethyl group have been synthesized from the alkaloid, (S)-abrine and elucidated for potency in the catalytic enantioselective ethylation of PhCHO with Et₂Zn. In general, the secondary amines 15a–d bearing a dialkylhydroxymethyl group induced (R)-1-phenyl-1-propanol, whereas 15e–g and 18 bearing a diarylhydroxymethyl group favored the (S)-enantiomer. In contrast, the β-tertiary amino alcohols 20b–d and 21 produced (R)-1-phenyl-1-propanol, regardless of the substituents at the carbon bearing the hydroxy group. Enantiomeric excess of 87.5% was obtained for (R)-1-phenyl-1-propanol using ligand 21 as the promoter. Eleven substituted benzaldehydes and naphthaldehydes were examined for enantioselective ethylation by using 21 and the chiral alcohols were obtained in 93–97% ee, except for o-BrC₆H₄CHO and p-Me₂NC₆H₄CHO. Excellent enantioselectivity was also observed in the ethylation of cyclohexanecarboxaldehyde (94.8% ee) and 2-thiophenecarboxaldehyde (94.9% ee) by using catalytic 21. The anti 5/4/4-fused tricyclic TS I was proposed to rationalize the asymmetric induction. The diethylhydroxymethyl and N-2-t-butylethyl groups are believed to enforce the preference for the anti-TS(R) I and it results in high enantioselectivity.     

Enantioselective arylation of aldehydes catalyzed by a soluble optically active polybinaphthols ligand

A soluble chiral polymer ligand was synthesized by the polymerization of (R)-6,6′-dibutyl-3,3′-diformyl-2,2′-binaphthol (R-M-1) with 2,5-diaminopyridine (M-2) via a nucleophilic addition-elimination reaction. While arylboronic acids were used as the source of the transferable aryl group, the chiral polybinaphthols ligand in combination with Et₂Zn without Ti(OⁱPr)₄ exhibited higher enantioselectivity in asymmetric addition to aromatic aldehydes than alphatic aldehydes. When aromatic aldehydes with electron-withdrawing groups were chosen as substrates, the resulting diarylmethanols were produced in higher ee values than those with electron-donating groups as substrates. 2-Naphthaldehyde used as a substrate afforded product in 95% ee, which could be ascribed to the steric effect influence on this asymmetric arylation reaction. Moreover, the chiral polymer was easily recovered and reused, but exhibited a decrease of enantioselectivity in the third recycle.     

Asymmetric dehydration of β-hydroxy esters and application to the syntheses of flavane derivatives

Catalytic asymmetric dehydration of β-aryl or alkyl substituted β-hydroxy esters via kinetic resolution has been investigated. A brief survey of 10 different chiral ligands is conducted to examine the effects of chiral ligand structure on selectivity of the dehydration. The kinetic resolution of a variety of rac-β-hydroxy tert-butyl esters in the presence of prolinol chiral ligand 2 and BrZnCH₂CO₂-t-Bu can provide highly enantioenriched β-hydroxy esters 14-21 with selectivity factors ranging from 11 to 66. Also, application of this asymmetric synthetic methodology to the preparation of enantioenriched flavane derivatives 25-29 is demonstrated.