Preparation of SERS active Ag nanoparticles encapsulated by phospholipids

A cost‐effective way of fabricating lipid‐coated surface‐enhanced Raman spectroscopy (SERS) substrate having reproducible high SERS activity was proposed. Ag nanoparticle embedded in 1,2‐dioleoyl‐sn‐glycero‐3‐phosphocholine (DOPC) and 1,2‐dioleoyl‐3‐trimethylammonium‐propane (DOTAP) membranes was produced by direct deposition of a 5‐nm‐thick layer of Ag onto the solid‐supported phospholipid membrane, and subsequent dissolution of the Ag nanoparticle‐embedded membrane in iso‐octane allowed easy one‐pot fabrication of DOPC‐ or DOTAP‐coated Ag nanoparticles. In particular, DOTAP produced nearly monodisperse lipid‐encapsulated Ag nanoparticles (9 nm in diameter) exhibiting reproducible high SERS activity (detecting up to 10 nM of rhodamine 6G and 0.5 μM of glutathione). In addition, the process was modified to incorporate variety of Raman active molecules (rhodamine 6G, malachite green, 4‐aminothiopheonol, 4‐mercaptopyridine) into the particle‐encapsulating lipid bilayer. The DOTAP/Raman dye‐coated Ag nanoparticles also generated high SERS activity to enable potential application of the DOTAP/Raman dye‐coated Ag nanoparticles feasible in different areas. Copyright © 2014 John Wiley & Sons, Ltd.     

One‐pot synthesis of silver particle aggregation as highly active SERS substrate

Silver particles with different degrees of aggregation were synthesized through a sodium dodecyl sulfate‐assisted one‐pot reaction in an aqueous medium. The products were characterized by transmission electron microscopy, scanning electron microscopy and UV‐visible spectroscopy. The results showed that the degree of aggregation of the Ag nanoparticles could be tuned by changing the reaction parameters, such as the reaction temperature and time. A possible formation process of the Ag aggregate is proposed on the basis of a series of experimental results. Moreover, the surface‐enhanced Raman scattering (SERS) effect of the Ag aggregates was evaluated by using rhodamine 6G as a Raman probe molecule. It was demonstrated that the SERS enhancement ability is related to the degree of aggregation of Ag particles, and a high SERS signal can be observed by selecting Ag nanoparticles with the proper degree of aggregation as substrates. Moreover, the aggregates showed good reproducibility and stability to SERS from organic molecules. Copyright © 2010 John Wiley & Sons, Ltd.     

Facile synthesis of gelatin‐protected silver nanoparticles for SERS applications

Gelatin‐protected silver nanoparticles have been synthesized by a one‐pot, green method for surface‐enhanced Raman scattering (SERS) applications using gelatin as the reducing and stabilizing agent. The gelatin protection on silver nanoparticle surface helps improve its stability greatly and water dispersibility, while retaining high SERS activity of silver nanoparticles. The gelatin‐protected silver nanoparticles showed SERS signals as low as 100 nM of the typical Raman reporter molecules, RuBPY and R6G and 10 μM of other molecules of interest, melamine and folic acid. Copyright © 2013 John Wiley & Sons, Ltd.     

Fabrication and characterization of SERS‐active silver clusters on glassy carbon

In this article, a novel technique for the fabrication of surface enhanced Raman scattering (SERS) active silver clusters on glassy carbon (GC) has been proposed. It was found that silver clusters could be formed on a layer of positively charged poly(diallyldimethylammonium) (PDDA) anchored to a carbon surface by 4‐aminobenzoic acid when a drop containing silver nanoparticles was deposited on it. The characteristics of the obtained silver clusters have been investigated by atomic force microscopy (AFM), SERS and an SERS‐based Raman mapping technique in the form of line scanning. The AFM image shows that the silver clusters consist of several silver nanoparticles and the size of the clusters is in the range 80–100 nm. The SERS spectra of different concentrations of rhodamine 6G (R6G) on the silver clusters were obtained and compared with those from a silver colloid. The apparent enhancement factor (AEF) was estimated to be as large as 3.1 × 10⁴ relative to silver colloid, which might have resulted from the presence of ‘hot‐spots’ at the silver clusters, providing a highly localized electromagnetic field for the large enhancement of the SERS spectra of R6G. The minimum electromagnetic enhancement factor (EEF) is estimated to be 5.4 × 10⁷ by comparison with the SERS spectra of R6G on the silver clusters and on the bare GC surface. SERS‐based Raman mapping technique in the form of line scanning further illustrates the good SERS activity and reproducibility on the silver clusters. Finally, 4‐mercaptopyridine (4‐Mpy) was chosen as an analyte and the lowest detected concentration was investigated by the SERS‐active silver clusters. A concentration of 1.6 × 10⁻¹⁰ M 4‐Mpy could be detected with the SERS‐active silver clusters, showing the great potential of the technique in practical applications of microanalysis with high sensitivity. Copyright © 2006 John Wiley & Sons, Ltd.     

SERS study of Ag nanoparticles electrodeposited on patterned TiO2 nanotube films

In this work, Ag nanoparticles (NPs) were deposited on patterned TiO₂ nanotube films through pulse‐current (PC) electrodeposition, and as a result patterned Ag NPs films were achieved. Scanning electron microscopy (SEM), electron probe microanalysis (EPMA), and X‐ray diffraction (XRD) were used, respectively, to study the morphology, uniformity, and phase structure of the patterned Ag NP films. The size and density of the as‐deposited Ag NPs could be controlled by changing the deposition charge density, and it was found that the patterned Ag NP films produced under a charge density of 2.0 C cm⁻² gave intense UV–vis and Raman peaks. Two‐dimensional surface‐enhanced Raman scattering (SERS) mapping of rhodamine 6G (R6G) on the patterned Ag NP films demonstrated a high‐throughput, localized molecular adsorption and micropatterned SERS effect. Copyright © 2010 John Wiley & Sons, Ltd.     

Nanostructured thin films as surface‐enhanced Raman scattering substrates

Nanoporous thin films with silver nanoparticles were synthesized with a bottom–up approach, and its potential as effective surface‐enhanced Raman scattering (SERS) substrates was demonstrated. The use of mesoporous titania films as substrates allowed to control the growth of nanoparticles on the film surface. Atomic force microscopy measurements, Ultraviolet‐visible and X‐ray diffraction analysis confirmed the photoreduction of Ag⁺ to Ag⁰ with the formation of nanoparticles with crystallite dimensions of 32 to 36 nm. The new substrates allowed the detection of two analytes (rhodamine B isothiocyanate and cytochrome c), present in solutions at very low concentrations, highlighting their potential in SERS sensing. Reproducibility, homogeneity, enhancement factor of the substrate, consistency of results and detection limits were also assessed. Copyright © 2012 John Wiley & Sons, Ltd.     

Surface-enhanced Raman scattering from silver nanostructures with different morphologies

Scanning electron microscopy and X-ray diffraction reveal that four different types of crystalline silver nanostructures including nanoparticles, nanowires, nanocubes, and bipyramids are synthesized by a solvothermal method by reducing silver nitrate with ethylene glycol using poly(vinylpyrrolidone) as an adsorption agent and adding different quantities of sodium chloride to the solution. These nanostructures which exhibit different surface plasma resonance properties in the ultraviolet–visible region are shown to be good surface-enhanced Raman scattering (SERS) substrates using rhodamine 6G molecules. Our results demonstrate that the silver nanocubes, bipyramids with sharp corners and edges, and aggregated silver nanoparticles possess better SERS properties than the silver nanowires, indicating that they can serve as high-sensitivity substrates in SERS-based measurements.     

退火法制备石墨烯-银纳米粒子及其增强拉曼实验

针对目前SERS基底上金属颗粒制备过程中存在的分布不均匀、易氧化和稳定性差等缺点,通过热蒸镀和高温退火获得分布均匀的SERS基底;同时结合石墨烯优良的光学性能、化学惰性、荧光猝灭以及本身的SERS增强等优点,制备了稳定的石墨烯-银纳米颗粒（GE/AgNPs）复合结构SERS基底。通过GE/AgNPs复合结构的拉曼光谱稳定性试验证明了石墨烯在GE/AgNPs结构中起到隔绝银纳米颗粒与空气直接接触及催化氧化银脱氧的作用,有利于SERS基底的时间稳定性。(1) 石墨烯、Ag纳米颗粒及其复合结构的制备。首先采用热蒸镀和高温退火的方法使Ag纳米颗粒均匀地沉积在SiO₂/Si基底上,再采用化学气相沉积法在Cu箔上制备少层石墨烯,并用湿法转移法将石墨烯转移到目标基底上,并实验研究了以不同的退火顺序对GE/AgNPs基底造成的影响。(2) 石墨烯、Ag纳米颗粒及其复合基底的表征。分别采用光学显微镜、扫描电子显微镜和拉曼光谱进行表征,得到转移后的纯石墨烯较完整地覆盖在SiO₂/Si基底上面,表面比较平整,但在少数地方仍然存在褶皱和杂质;SEM表征结果表明对于不同制备流程的GE/AgNPs复合结构上的Ag纳米颗粒基本呈球形。基本符合Ostwald熟化理论,通过对退火温度和时间的控制能获得平均粒径在40~60 nm的银颗粒,且分布较均匀。此外,在不同退火顺序中,石墨烯的加入对银纳米颗粒的扩散形成扩散势垒,从而出现较大的不规则的颗粒。(3) 基底稳定性试验和仿真分析。通过基底本身的Raman mapping测试,分析了石墨烯拉曼特征峰峰值和半高宽的变化,得知基底对石墨烯本身的拉曼增强效果主要来源于银纳米颗粒间的电磁场增强。同时采用浓度为10-6 mol·L-1的罗丹明6G (R6G)水溶液作为探针分子,对转移了石墨烯的GE/AgNPs复合基底和未转移石墨烯的Ag纳米颗粒基底进行了SERS稳定性实验。结果表明GE/AgNPs复合基底在1~33 d内衰减较缓慢,30 d后仍能探测到拉曼信号约为原来信号的35.1%~40.6%;而纯Ag基底上随着Ag纳米颗粒在空气中迅速氧化,基底的SERS性能显著下降,在30 d后只有原来信号的5.9%~11.3%。此外,通过实验得到覆盖了石墨烯之后的增强因子约为6.05×105。最后采用时域有限差分算法（FDTD）计算了复合结构的电磁场分布和理论增强因子,其理论增强因子可以达到5.7×105。实验和仿真结果的差异,主要是源于石墨烯的化学增强作用。     

Time-dependent micro-Raman scattering studies of polyvinyl alcohol and silver nitrate thin films

In-situ monitoring of silver nanoparticle formation was studied in thin films of polyvinyl alcohol and silver nitrate. We proposed the observation of surface-enhanced Raman spectroscopy (SERS) as a novel and simple technique to record the growth of silver nanoparticles in polyvinyl alcohol thin films. Observed enhancement in the Raman bands of polyvinyl alcohol is explained through the localized surface plasmon resonance of silver nanoparticles. Influence of temperature generated by silver nanoparticles on the formation of nanoparticles is also discussed.     

SERS activity of pulsed laser ablated silver thin films with controlled nanostructure

The surface‐enhanced Raman scattering (SERS) activity of silver thin films deposited by the pulsed laser ablation technique was investigated. The samples were grown in a controlled Ar atmosphere at pressures ranging between 10 and 70 Pa, and changing the number of laser pulses. Different surface morphologies, from isolated nearly spherical nanoparticles (NPs) to larger islands with smooth edges, were observed by means of scanning and transmission electron microscopies, as a function of the different deposition conditions adopted. SERS measurements were performed by soaking the samples in rhodamine 6G aqueous solutions over the concentration range between 1.0 × 10⁻⁴ and 5.0 × 10⁻⁸ M . Raman spectra were acquired using both the 632.8 and 514.5 nm excitation sources. The dependence of the SERS activity of the samples on the observed surface morphology is presented and discussed. The presence of the so called hot spots is envisaged. Copyright © 2011 John Wiley & Sons, Ltd.     

SERS activity of Au nanoparticles coated on an array of carbon nanotube nested into silicon nanoporous pillar

A novel composite structure, Au nanoparticles coated on a nest-shaped array of carbon nanotube nested into a silicon nanoporous pillar array (Au/NACNT/Si-NPA), was fabricated for surface-enhanced Raman scattering (SERS). The morphology of the Au/NACNT/Si-NPA composite structure was characterized with the aid of scanning electron microscopy, X-ray diffraction instrumentation and Transmission electron microscopy. Compared with SERS of rhodamine 6G (R6G) adsorbed on SERS-active Au substrate reported, the SERS signals of R6G adsorbed on these gold nanoparticles were obviously improved. This was attributed to the enlarged specific surface area for adsorption of target molecules brought by the nest-shaped CNTs structure.     

Characterization and optimization of AuNPs labeled by Raman reporters on glass based on silver enhancement

In this report, gold nanoparticles (AuNPs) labeled by Raman reporters (AuNPs‐R6G) were assembled on glass and used as the seeds to in situ grow silver‐coated nanostructures based on silver enhancer solution, forming the nanostructures of AuNPs‐R6G@Ag, which were characterized by scanning electron microscopy (SEM) and UV‐visible spectroscopy. More importantly, the obtained silver‐coated nanostructures can be used as a surface enhancement Raman scattering (SERS) substrate. The different SERS activities can be controlled by the silver deposition time and assembly time of AuNPs‐R6G on glass. The results indicate that the maximum SERS activity could be obtained on AuNPs‐R6G when these nanostructures were assembled on glass for 2 h with silver deposition for 2 min. In addition, the reproducibility of SERS signal on the fabricated nanostructures is very high with the intensity error lower than 15%, which has great promise as a probe for application in bioanalysis. Copyright © 2008 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman evidence for Rhodamine 6 G and its derivative with different adsorption geometry to colloidal silver nanoparticle

Some high‐affinity functional groups or resonant molecules were often used as probe molecules adsorbed on silver nanoparticles for Surface‐enhanced Raman scattering (SERS). However, it is still unclear how the attached molecules interact with the silver nanoparticles' surface, and how the anchoring groups affect the optical and electronic properties of molecules. Here, we report that surface‐enhanced Raman studies of two organic compounds; rhodamine 6G (R6G) and its aminated derivative (R‐NH₂) have very different functional groups for surface binding but nearly identical SERS spectroscopic properties at pH = 7 and UV–vis at pH = 3, respectively. A surprise was found that under the same experimental conditions, the SERS signal intensity for R6G is nearly 50‐fold higher than that of R‐NH₂. Furthermore, the pH‐dependent study reveals that the structure of R6G is irreversibly stabilized or ‘locked’ in its form and no longer responsive to pH changes. In contrast, R‐NH₂ is still sensitive to pH, and can be switched between its open‐ring and closed‐ring structures. Copyright © 2013 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering on colloid gels originated from low molecular weight gelator

Surface‐enhanced Raman scattering (SERS) on silver and gold colloid gels formed by a low molecular weight organic gelator, bis‐(S‐phenylalanine) oxalyl amide, was obtained. Strong Raman signals dominate in the SERS spectra of hydrogels containing silver nanoparticles prepared by citrate and borohydride reduction methods, whereas broad bands of low intensity are detected in the spectra of gold colloid gels. Resemblance between Raman spectrum of the crystalline substance and the SERS spectra of the silver nanoparticle–hydrogel composites implies the electromagnetic nature of the signal enhancement. A change in Raman intensity of the benzene and amide II bands caused by an increase in temperature and concentration indicates that the gelling molecules are strongly attached through the benzene moieties to the metal nanoparticles while participating in gel formation by intermolecular hydrogen bonding between the adjacent oxalyl amide groups. Transmission electron microscopy reveals a dense gel structure in the close vicinity of the enhancing metal particles for both silver colloid gels. Copyright © 2008 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering (SERS) spectra of hemoglobin on nano silver film prepared by electrolysis method

Nano silver films were prepared by the electrolysis method. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) were employed to detect the morphology of the silver particles. The surface‐enhanced Raman scattering (SERS) spectra of the hemoglobin on nano silver film were recorded. It is seen from the SERS spectra that the nano silver films can enhance the Raman signals of the hemoglobin efficiently, and sodium citrate and phosphate buffered saline have no influence on the SERS spectra of hemoglobin. The electrolysis technique to fabricate this highly bioactive, stable, reusable, and low‐cost SERS substrate will be useful in the development of hemoglobin detection methods. Copyright © 2009 John Wiley & Sons, Ltd.     

Controlling the properties of silver nanoparticles deposited on surfaces using supercritical carbon dioxide for surface-enhanced Raman spectroscopy

Silver nanoparticles (AgNPs) have been deposited on silicon and glass surfaces via a supercritical carbon dioxide (sc-CO₂) synthesis route for application in surface-enhanced Raman spectroscopy (SERS). Arrhenius plots revealed that nucleation and growth processes in this system depend on both temperature and surface chemistry. Results also demonstrated that temperature and surface chemistry could be varied to control nanoparticle properties, such as the mean nanoparticle size, density, and surface coverage, providing two useful variables for manipulating the properties of AgNPs deposited on surfaces in this system. These data also provide scientific insight into the underlying mechanisms governing heterogeneous AgNP deposition on a substrate in a sc-CO₂ system in addition to engineering insight into the variables that can be used to manipulate AgNP characteristics. The mean particle size could be tuned over the range 20–200 nm, the interparticle distance could be tuned over the range 70 nm–1 μm, and the surface coverage could be tuned over the range 0.035–0.58. Products were analyzed by scanning electron microscopy with image analysis, transmission electron microscopy, X-ray diffraction, and SERS. The silver nanoparticle-coated substrates were successfully applied in SERS, detecting the model analyte Rhodamine 6G at a concentration of 1 μM, a three orders of magnitude improvement over SERS surfaces previously fabricated in sc-CO₂ systems. Such surfaces can find use in trace concentration analyte detection in biomedical, chemical, and environmental applications.     

Self-assembled silver nanoparticle films at an air-liquid interface and their applications in SERS and electrochemistry

In this paper, we present a novel technique to prepare silver nanoparticle films by controlling the self-assembly of nanoparticles at an air-liquid interface. In an ethanol-water phase, silver nanoparticles were prepared by reduction of AgNO₃ aqueous solution with NaBH₄ in the presence of cinnamic acid. It was found that the silver nanoparticles in this process could be trapped at the air-liquid interface to form 2-dimensional nanoparticle films. The morphology of nanoparticle films could be controlled by systematic variation of the experimental parameters. It is worth noting that the nanoparticle films could serve as the active substrates for surface-enhanced Raman scattering (SERS). 4-Aminothiophenol (4-ATP) molecule was used as a test probe to investigate the SERS sensitivity of different nanoparticle films. The results indicated that the nanoparticle films showed excellent Raman enhancement effect. Furthermore, the nanoparticle films prepared by our strategy were found to be efficient electrocatalysts for anodic oxidation of formaldehyde in alkaline medium.     

基于单个花状银纳米颗粒的表面增强拉曼散射效应研究

在室温下,以硝酸银为银源,抗坏血酸为还原剂,通过调节表面活性剂聚乙烯吡络烷酮的浓度,实现对花状银纳米颗粒的可控制备。利用扫描电子显微镜、原子力显微镜、X射线衍射和X射线能谱等手段检测并分析了材料的形貌结构和成分组成。实验结果表明,当聚乙烯吡络烷酮的浓度为0.1 mol/L时,所制备花状银纳米颗粒的表面结构达到最精细的状态且颗粒的尺寸达到微米量级,适合对单颗粒进行定位与光学性质研究。以结构最优化的花状银纳米颗粒为表面增强拉曼散射基底材料,以羟基苯甲酸为探针,对单个和少数颗粒的表面增强拉曼散射效应进行了研究,并借助暗场散射光谱分析了基底的表面增强拉曼散射机理。结果显示,该花状银纳米颗粒因其独特的表面结构为拉曼信号增强提供了大量“热点”。良好的拉曼性能以及较低的制备成本表明,该新型表面增强拉曼散射基底具有很大的应用前景。     

Large scale synthesis of pinhole‐free shell‐isolated nanoparticles (SHINs) using improved atomic layer deposition (ALD) method for practical applications

Shell‐isolated nanoparticle‐enhanced Raman spectroscopy (SHINERS) as a new member of Raman technique garnered great attention among scientific community. In this work, we used an improved experimental setup to float the bare silver nanoparticles in air with the help of extraneous airflow, and used atomic layer deposition (ALD) method to coat ultra‐thin inert shell without pinholes. Under optimal conditions, we successfully prepared three kinds of SHINERS NPs (Ag@Al₂O₃, Ag@SiO₂ and Ag@TiO₂) in large quantity without pinholes. The ultra‐thin inert shell maintains the SERS activity of silver nanoparticles for long period of time. Transmission electron microscopy (TEM) images confirm the uniform coating of shell material on silver nanoparticles. Finally, the as‐prepared SHINs have been applied to detect various samples to demonstrate the applications. The presented ALD method offers a unique way to coat ultrathin shell (1–10 nm) on metal nanoparticles in large quantity (1–10 g) for practical applications. Copyright © 2015 John Wiley & Sons, Ltd.