Investigation of confined ionic liquid in nanostructured materials by a combination of SANS, contrast-matching SANS, and nitrogen adsorption

Small-angle neutron scattering (SANS), contrast-matching SANS, and nitrogen adsorption have been utilized to investigate the confined ionic liquid (IL) [bmim][PF(6)] phase in ordered mesoporous silica MCM-41 and SBA-15. The results suggest that the pores of SBA-15 are completely filled with IL whereas a small fraction of the pore volume, the pore "core", of MCM-41 is empty. The contrast-matching SANS measurements confirm the enhanced solubility of water in IL. In addition, they provide strong evidence that water does not enter the empty pore core of MCM-41, possibly because of the preferred orientation of the IL molecules in the adsorbed layer.     

Adsorption isotherms of nonionic surfactants in SBA-15 measured by micro-column chromatography

In this work, micro-column liquid chromatography has been employed for the study of the adsorption of ethylene glucol monoether (C8E4) and pentaethylene glucol monoether (C10E5) nonionic surfactants into the nanopores of SBA-15 silica at two temperatures. The adsorption process for both the surfactants has been investigated in the range of concentration from very dilute solution to "just above" critical micelle concentration (CMC). The adsorption data for both the surfactants are characterized as typical LC-shaped isotherms with plateau near the CMC. A simple two-step adsorption model has been applied to represent an experimental data. An attempt to estimate the thickness of the surfactant layer in the pores, from the experimental data, has been made.     

Adsorption, capillary bridge formation, and cavitation in SBA-15 corrugated mesopores: a Derjaguin-Broekhoff-de Boer analysis

A Derjaguin-Broekhoff-de Boer analysis of adsorption and desorption in SBA-15 mesoporous silica is presented, using realistic geometrical models that account for the pore corrugation in these materials. The model parameters are derived from independent electron tomography and small-angle scattering characterization. A geometrical characteristic of the pore that is found to be important for adsorption is the corrugation length, l(C), which describes the longitudinal size of the geometrical defects along a given pore. Capillary bridges are possible only for large values of l(C). The results are explained in terms of two spinodal and two equilibrium pressures, characterizing the wide and the narrow sections of the pores. Simplified analytical expressions are obtained, which provide necessary conditions for bridge formation and for cavitation in terms of the radii of the narrow and wide sections of the pores, as well as of l(C). Quite generally, the results show that the deviation of the pore shape from that of ideal cylinders is key to understanding adsorption and desorption in corrugated mesopores, notably in SBA-15.     

In situ SAXS investigation of dibromomethane adsorption in ordered mesoporous silica

A SAXS/WAXS apparatus with the aid of a specially designed sample cell capable for performing both SAXS and WAXS experiments was used for adsorption studies in nanoporous materials. The applicability of the instrument for structural investigations and its ability for adsorption experiments because of the advanced sample environment were demonstrated by carrying out in situ SAXS measurements during gas physisorption. SAXS profiles of ordered mesoporous silica were measured at selected equilibrium points alongside a dibromomethane (CH₂Br₂) adsorption isotherm at 293 K. SBA-15 was the adsorbent of choice because it consists of a regular 2D hexagonal array of cylindrical mesopores that gives rise to Bragg reflections in the small-angle regime. CH₂Br₂ was selected as a contrast-matching fluid because it has almost the same electron density as silica. We obtained high-quality data comparable to those resulting from experiments performed in synchrotron light sources which produce intense beams of x-rays and support advanced instrumentation for high-resolution diffraction and SAXS studies. The Bragg peaks of the pore lattice are clearly visible for the evacuated sample and at the early stages of the adsorption process. The intensity decrease and the elimination of the Bragg peaks for the saturated sample suggest that an almost perfect contrast matching was achieved. A model has been used for monitoring the fluid condensation and evaporation regime in SBA-15 by taking into account both the Bragg scattering and the diffuse scattering for spatially random pore filling. The results show the absence of spatial correlations between filled pores suggesting random pore filling.     

Gibbs ensemble Monte Carlo simulation of adsorption for model surfactant solution in confined slit pores

An isobaric-isothermal Gibbs ensemble Monte Carlo simulation has been carried out to study the adsorption of a model surfactant/solvent mixture in slit nanopores. The adsorption isotherms, the density distributions, and the configuration snapshots were simulated to illustrate the adsorption and self-assembly behaviors of the surfactant in the confined pores. The adsorption isotherms are stepwise: a two-step curve for the smaller (30 A) pore and a three-step one for the larger (50 A) pore. The adsorption isotherms and the interfacial aggregate structure of the surfactants in the pores with various sizes show a qualitatively consistent performance with the previous experimental observation. The micelle size distributions of the adsorbed surfactant aggregates have been analyzed in order to understand the adsorption mechanism, which suggests that the step rise in the surfactant adsorption is associated with the considerable formation of the micelle aggregates in the confined pores. The effect of the interaction between the pore surface and the surfactant on the adsorption behavior has also been investigated. The simulation results indicate that a change in the interaction can modify the shape of adsorption isotherms. A nonlinear mathematical model was used to represent the multistep adsorption isotherms. A good agreement between the model fitting and the simulation data was obtained for both the amount of adsorption and the jump point concentration.     

Assembling wormlike micelles in tubular nanopores by tuning surfactant-wall interactions

Threadlike molecular assemblies are excluded from narrow pores unless attractive interactions with the confining pore walls compensate for the loss of configurational entropy. Here we show that wormlike surfactant micelles can be assembled in the 8 nm tubular nanopores of SBA-15 silica by adjusting the surfactant-pore-wall interactions. The modulation of the interactions was achieved by coadsorption of a surface modifier that also provides control over the partitioning of wormlike aggregates between the bulk solution and the pore space. We anticipate that the concept of tuning the interactions with the pore wall will be applicable to a wide variety of self-assembling molecules and pores.     

有序介孔二氧化硅对正丁醛的吸附性能

合成了一系列具有不同孔结构与性质的有序介孔二氧化硅材料SBA-15、MCM-41、SBA-16、KIT-6,同时通过改变水热温度制备了不同孔径大小的SBA-15,并利用小角X射线散射、透射电镜、扫描电镜和氮气吸附-脱附等手段,对其介孔结构进行了表征.以正丁醛为探针分子,考察了其对有机醛的吸附,并与Y-沸石的吸附性能做了对比.结果表明,材料的介孔比表面积与其对正丁醛的吸附量成正比,吸附等温线符合Langmuir模型,属于单层吸附,具有最大介孔比表面积的MCM-41对正丁醛的吸附量最大(484 mg·g-1).最后将SBA-15添加到卷烟滤嘴中,实验结果表明,SBA-15能显著降低卷烟烟气中巴豆醛的释放量.     

Self-assembly of a metallosupramolecular coordination polyelectrolyte in the pores of SBA-15 and MCM-41 silica

It is shown that intrinsically stiff chain aggregates of a metallosupramolecular coordination polyelectrolyte (MEPE) can form in the cylindrical nanopores of MCM-41 and SBA-15 silica by self-assembly of its constituents (metal ions and organic ligand). The UV/vis spectra of the resulting MEPE-silica composites exhibit the characteristic metal-to-ligand charge transfer band of the MEPE complex in solution. For the MEPE-silica composite in SBA-15 an iron content of 1.2 wt % was found, corresponding to ca. 10 MEPE chains disposed side by side in the 8 nm wide pores of the SBA-15 matrix. In the case of MCM-41 (pore width < 3 nm), where only one MEPE chain per pore can be accommodated, an iron content of 0.3 wt % was obtained, corresponding to half-filling of the pores. It was also found that MEPE chains spontaneously enter the pores of SBA-15, when a solution of MEPE is exposed to the silica matrix.     

Self-assembly of hydrophobin and hydrophobin/surfactant mixtures in aqueous solution

The self-assembly of the protein hydrophobin, HFBII, and its self-assembly with cationic, anionic, and nonionic surfactants hexadecylterimethyl ammonium bromide, CTAB, sodium dodecyl sulfate, SDS, and hexaethylene monododecyl ether, C(12)E(6), in aqueous solution have been studied by small-angle neutron scattering, SANS. HFBII self-assembles in solution as small globular aggregates, consistent with the formation of trimers or tetramers. Its self-assembly is not substantially affected by the pH or electrolytes. In the presence of CTAB, SDS, or C(12)E(6), HFBII/surfactant complexes are formed. The structure of the HFBII/surfactant complexes has been identified using contrast variation and is in the form of HFBII molecules bound to the outer surface of globular surfactant micelles. The binding of HFBII decreases the surfactant micelle aggregation number for increasing HFBII concentration in solution, and the number of hydrophobin molecules bound/micelle increases.     

Size-dependent interaction of silica nanoparticles with different surfactants in aqueous solution

The size-dependent interaction of anionic silica nanoparticles with ionic (anionic and cationic) and nonionic surfactants has been studied using small-angle neutron scattering (SANS). The surfactants used are anionic sodium dodecyl sulfate (SDS), cationic dodecyltrimethyl ammonium bromide (DTAB), and nonionic decaoxyethylene n-dodecylether (C(12)E(10)). The measurements have been carried out for three different sizes of silica nanoparticles (8, 16, and 26 nm) at fixed concentrations (1 wt % each) of nanoparticles and surfactants. It is found that irrespective of the size of the nanoparticles there is no significant interaction evolved between like-charged nanoparticles and the SDS micelles leading to any structural changes. However, the strong attraction of oppositely charged DTAB micelles with silica nanoparticles results in the aggregation of nanoparticles. The number of micelles mediating the nanoparticle aggregation increases with the size of the nanoparticle. The aggregates are characterized by fractal structure where the fractal dimension is found to be constant (D ≈ 2.3) independent of the size of the nanoparticles and consistent with diffusion-limited-aggregation-type fractal morphology in these systems. In the case of nonionic surfactant C(12)E(10), micelles interact with the individual silica nanoparticles. The number of adsorbed micelles per nanoparticle increases drastically whereas the percentage of adsorbed micelles on nanoparticles decreases with the increase in the size of the nanoparticles.     

Adsorption and wetting characterization of hydrophobic SBA-15 silicas

This work describes adsorption and wetting characterization of hydrophobic ordered mesoporous silicas (OMSs) with the SBA-15 motif. Three synthetic approaches to prepare hydrophobic SBA-15 silicas were explored: grafting with (1) covalently-attached monolayers (CAMs) of C(n)H(2)(n+1)Si(CH(3))(2)N(CH(3))(2), (2) self-assembled monolayers (SAMs) of C(n)H(2)(n+1)Si(OEt)(3), and (3) direct ("one-pot") co-condensation of TEOS with C(n)H(2)(n+1)Si(OEt)(3) in presence of P123 (n=1-18). The materials prepared were characterized by nitrogen adsorption, TEM, and chemical analysis. The surface properties of the materials were assessed by water contact angles (CAs) and by BET C constants. The results showed that, while loadings of the alkyl groups (%C) were comparable, the surface properties and pore ordering of the materials prepared through different methods were quite different. The best quality hydrophobic surfaces were prepared for SBA-15 grafted with CAMs of alkylsilanes. For these materials, the water CAs were above ～120°/100° (adv/rec) and BET C constants were in the range of ～15-25, indicating uniform low-energy surfaces of closely packed alkyl groups on external and internal surfaces of the pores respectively. Moreover, surfaces grafted with the long-chained (C(12)-C(18)) silanes showed super-hydrophobic behavior (CAs～150-180°) and extremely low adhesion for water. The pore uniformity of parental SBA-15 was largely preserved and the pore volume and pore diameter were consistent with the formation of a single layer of alkylsilyl groups inside the pores. Post-synthesis grafting of SBA-15 with SAMs worked not as well as CAMs: the surfaces prepared demonstrated lower water CAs and higher BET C constants, thereby indicating a small amount of accessible polar groups (Si-OH) related to packing constrains for SAMs supported on highly curved surfaces of mesopores. The co-condensation method produced substantially more disordered materials and less hydrophobic surfaces than any of the grafting methods. The surfaces of these materials showed low water CAs and high BET C constants (～100-200) thereby demonstrating a non-uniform surface coverage and presence of unmodified silica. It is concluded that CAMs chemistry is the most efficient approach in preparation of the functionalized OMS materials with uniform surfaces and pores.     

Characterization of the pores in hydrous ferric oxide aggregates formed by freezing and thawing

Hydrous ferric oxides (HFO) are efficient sorbents for inorganic and organic pollutants and therefore have great potentials in environmental science and engineering applications. Freezing and thawing of HFO suspensions leads to the formation of dense HFO aggregates. It facilitates the handling and increases the drying rate of HFO. In this study, we used a combination of pycnometry, gas adsorption (N(2) gas, water vapor), and small-angle neutron scattering (SANS) to characterize the porosity and pore size distribution of dense HFO aggregates formed by freezing dialyzed HFO suspensions at -25 degrees C and thawing them at room temperature. The crystallinity of the HFO, which was a 2-line ferrihydrite, was not affected by this treatment. Wet sieving and laser diffraction analysis showed that the dense HFO aggregates had a unimodal size distribution with an average diameter of 235+/-35 microm. Increasing the freezing rate by cooling with liquid N(2) (-196 degrees C) resulted in much smaller aggregates with an average diameter of 20 microm. Adding NaNO(3) electrolyte to the HFO suspensions prior to freezing also resulted in the formation of smaller aggregates. The dense HFO aggregates formed at -25 degrees C had a porosity of 0.73+/-0.02 ll(-1). SANS revealed a unimodal size distribution of pores, with an average pore diameter of 2.0 nm. The diameter of the HFO crystallites was estimated by transmission electron microscopy to be 1.9+/-0.5 nm. Geometrical considerations taking into account the unit particle and average pore size suggest that the crystallites retain 1-2 layers of hydration water during the coagulation induced by freezing. Analysis by N(2) gas adsorption showed that drying the dense HFO aggregates induced a reduction in porosity by about 25% and shifted the pore size distribution to smaller diameters. Rewetting during water vapor adsorption did not induce significant changes of the aggregate structure. The specific surface area of the dry HFO aggregates was between 320 and 380 m(2)g(-1).     

有序介孔二氧化硅对正丁醛的吸附性能

合成了一系列具有不同孔结构与性质的有序介孔二氧化硅材料SBA-15、MCM-41、SBA-16、KIT-6, 同时通过改变水热温度制备了不同孔径大小的SBA-15, 并利用小角X射线散射、透射电镜、扫描电镜和氮气吸附-脱附等手段, 对其介孔结构进行了表征. 以正丁醛为探针分子, 考察了其对有机醛的吸附, 并与Y-沸石的吸附性能做了对比. 结果表明, 材料的介孔比表面积与其对正丁醛的吸附量成正比, 吸附等温线符合Langmuir 模型, 属于单层吸附, 具有最大介孔比表面积的MCM-41对正丁醛的吸附量最大(484 mg·g^-1). 最后将SBA-15添加到卷烟滤嘴中, 实验结果表明, SBA-15能显著降低卷烟烟气中巴豆醛的释放量.     

Forces between silica surfaces with adsorbed cationic surfactants: influence of salt and added nonionic surfactants

Forces have been measured between silica surfaces with adsorbed surfactants by means of a bimorph surface force apparatus. The surfactants used are the cationic surfactant tetradecyltrimethylammonium bromide (TTAB) and the nonionic surfactant hexakis(ethylene glycol) mono-n-tetradecyl ether (C(14)E(6)) as well as mixtures of these two surfactants. The measurements were made at elevated pH, and the effect of salt was studied. At high pH the glass surface is highly charged, which increases the adsorption of TTAB. Despite the low adsorption generally seen for nonionic surfactants on silica at high pH, addition of C(14)E(6) has a considerable effect on the surface forces between two glass surfaces in a TTAB solution. The barrier force is hardly affected, but the adhesion is reduced remarkably. Also, addition of salt decreases the adhesion, but increases the barrier force. In the presence of salt, addition of C(14)E(6) also increases the thickness of the adsorbed layer. The force barrier height is also shown to be related to literature values for surface pressure data in these systems.     

Hydrogen bonding of water confined in mesoporous silica MCM-41 and SBA-15 studied by 1H solid-state NMR

The adsorption of water in two mesoporous silica materials with cylindrical pores of uniform diameter, MCM-41 and SBA-15, was studied by 1H MAS (MAS=magic angle spinning) and static solid-state NMR spectroscopy. All observed hydrogen atoms are either surface -SiOH groups or hydrogen-bonded water molecules. Unlike MCM-41, some strongly bound water molecules exist at the inner surfaces of SBA-15 that are assigned to surface defects. At higher filling levels, a further difference between MCM-41 and SBA-15 is observed. Water molecules in MCM-41 exhibit a bimodal line distribution of chemical shifts, with one peak at the position of inner-bulk water, and the second peak at the position of water molecules in fast exchange with surface -SiOH groups. In SBA-15, a single line is observed that shifts continuously as the pore filling is increased. This result is attributed to a different pore-filling mechanism for the two silica materials. In MCM-41, due to its small pore diameter (3.3 nm), pore filling by pore condensation (axial-pore-filling mode) occurs at a low relative pressure, corresponding roughly to a single adsorbed monolayer. For SBA-15, owing to its larger pore diameter (8 nm), a gradual increase in the thickness of the adsorbed layer (radial-pore-filling mode) prevails until pore condensation takes place at a higher level of pore filling.     

Formation of surfactant-stabilized silica organosols

Organosols comprising silica nanoparticles, stabilized by adsorbed surfactant layers in low dielectric organic solvents were formulated, and their properties studied. A range of different methods for organosol formation starting from aqueous sols were evaluated and compared, in order to determine the most reliable and reproducible approach. To understand the influence of surfactant type and solvent on stability, samples were prepared with a range of surfactants and in different solvents and solvent blends. Structural properties and interparticle interactions were probed using dynamic light scattering (DLS), zeta potentials were determined, and the surfactant layers were investigated with contrast-variation SANS. SANS data suggest that for systems stabilized by ionic surfactants, the nanoparticles are in equilibrium with a population of reverse micelles, but this is apparently not the case for those stabilized by nonionic surfactants. Low zeta potentials show evidence of a small amount of surface charging in these nonaqueous systems, although it is unlikely to have any significant effect on their overall stability.     

New phosphate fluorosurfactants for carbon dioxide

Anionic phosphate fluorosurfactants were shown to self-assemble into water-in-carbon dioxide microemulsions. The surfactants, having either two fluorinated chains or one fluorinated chain and one hydrocarbon chain, facilitated significant water uptake in CO2. Small angle neutron scattering (SANS) measurements of surfactant/water/CO2 solutions confirmed the presence of nanometer-scale aggregates, indicative of microemulsion formation.     

Molecular dynamics simulations of surfactants at the silica-water interface: anionic vs nonionic headgroups

Understanding surfactant adsorption on surfaces at the molecular level will provide us with the ability to design specific surfactants for surface modification. We conducted molecular dynamics simulations for sodium dodecyl sulfate (SDS) and hexaethylene glycol monododecyl ether (C(12)E(6)) adsorbed on silica substrates with varying degree of hydroxylation. Our results shed light on the effects of hydroxylation on the surfactant aggregate morphology. The discrete charge distribution on the substrate surface appears to dictate both surfactant adsorption and aggregate morphology. The differences in aggregate morphology observed for anionic SDS and non-ionic C(12)E(6) on silica substrates are discussed quantitatively and compared to available experimental data.     

Applications of small-angle X-ray scattering/small-angle neutron scattering and cryogenic transmission electron microscopy to understand self-assembly of surfactants

The self-assembling structures and dynamics of surfactants determine most of their macroscopic physicochemical properties and performances. Herein, we review recent work on the self-assembly of surfactants by small-angle X-ray scattering (SAXS) and small-angle neutron scattering (SANS) in conjunction with cryogenic transmission electron microscopy (Cryo-TEM) from the perspective of researchers having only limited theoretical knowledge of these techniques but expert in surfactants. Emphasis is placed on the structural analysis of typical surfactant aggregates over a wide range of size scales from nanometers up to microns, including spherical and rod-like micelles, wormlike micelles, vesicles, liquid crystals and coacervates, by combining different numerical approaches to the treatment of small-angle scattering data with the direct Cryo-TEM imaging method. Furthermore, the complementarity between SAXS and SANS, and between the scattering techniques and Cryo-TEM, that is, specific contributions of these techniques, is also covered.