Solubility of phosphonium ionic liquid in alcohols, benzene, and alkylbenzenes

The (solid + liquid) phase equilibria and (liquid + liquid) phase equilibria of binary mixtures containing quaternary phosphonium salt-tetrabutylphosphonium methanesulfonate and alcohols or alkylbenzenes were investigated. The systems {[(CH(3)CH(2)CH(2)CH(2))4P][CH(3)SO(3)] + 1-butanol, or 1-hexanol, 1-octanol, 1-decanol, or 1-dodecanol} and {[(CH(3)CH(2)CH(2)CH(2))4P][CH(3)SO(3)] + benzene, or toluene, ethylbenzene, or propylbenzene} have been measured by a dynamic method at a wide range of temperatures from 220 to 386 K. Solid-liquid equilibria with immiscibility in the liquid phase were detected with the aromatic hydrocarbons ethylbenzene and propylbenzene. The basic thermodynamic properties of pure ionic liquid--the melting point, enthalpy of fusion, enthalpy of solid-solid-phase transition, and glass transition--have been determined by differential scanning calorimetry. The experimental data of systems with alcohols were correlated by means of the UNIQUAC ASM and NRTL1 equations and of systems with alkylbenzenes with Wilson and NRTL equations utilizing parameters derived from the (solid + liquid) equilibrium. The root-mean-square deviations of the solubility temperatures for all calculated data are dependent upon the particular system and the particular equation used.     

pi-Bonding in complexes of benzannulated biscarbenes, -germylenes, and -stannylenes: an experimental and theoretical study

Benzannulated bisstannylenes, exhibiting a CH(2)C(CH(3))(2)CH(2) linking unit and CH(2)tBu (1) or CH(2)CH(2)CH(2)NMe(2) (2) N-substituents, and their molybdenum tetacarbonyl complexes 3 and 4 have been prepared. The complexes 3 and 4 exhibit remarkably short Mo-E bond lengths compared to the related biscarbene and bisgermylene complexes. The experimentally determined bonding parameters of the molybdenum bisstannylene complexes are discussed based on DFT calculations.     

Electrophilic fluorinating reagent mediated synthesis of fluorinated alpha-keto Ethers,benzil, and 6,6'-dialkoxy-2,2'-bipyridines

Interactions of various fluorinated and nonfluorinated alcohols with trans-stilbene in the presence of electrophilic reagents were studied. Under neat conditions, reactions of trans-stilbene (1) with fluorinated alcohols, R(f)OH (R(f) = CF3CH2-, CFH2CH2-, CF3CF2CH2-, CF2H(CF2)3CH2-, (CF3)2CH-, (CF3)3C- (2a-f) in the presence of an electrophilic reagent, 1-(chloromethyl)-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) (Selectfluor) or N,N-difluoro-2,2'-bipyridinium bis(tetrafluoroborate) (MEC-31), gave alpha-keto ethers (3a-f) and benzil (4) in good to moderate yields. alpha-Keto ether and benzil formation was very much dependent on the reaction time, the degree of fluorination of the alcohols, and whether a solvent such as CH3CN, DMF or DMA was utilized. In solution, alpha-keto ethers and benzil did not form. Interestingly, under neat conditions, nonfluorinated alcohols, ROH (R = CH3-, CH3CH2-, CH3CH2CH2-, CH3CH2CH2CH2-, CH3CH2CH2CH2CH2CH2-) (5g-k) did not react with trans-stilbene in the presence of MEC-31 but gave 6,6'-dialkoxy-2,2'-bipyridines (6g-k), regioselectively, in excellent isolated yields. On the other hand, fluorinated alcohols did not react with MEC-31. Reaction of MEC-31 with an excess of diethylene glycol (7) gave the bipyridine derivative (8) in 88% isolated yield. Reaction of 8 either with diethylaminosulfur trifluoride (DAST) or bis(2-methoxyethyl)aminosulfur trifluoride (Deoxofluor) readily produced the corresponding difluoro derivative (9) in 85% isolated yield. All new compounds have been characterized by spectroscopic and elemental analysis.     

Primary and secondary phosphine complexes of iron porphyrins and ruthenium phthalocyanine: synthesis, structure, and P-H bond functionalization

Reduction of [Fe(III)(Por)Cl] (Por = porphyrinato dianion) with Na2S2O4 followed by reaction with excess PH2Ph, PH2Ad, or PHPh2 afforded [Fe(II)(F20-TPP)(PH2Ph)2] (1a), [Fe(II)(F20-TPP)(PH2Ad)2] (1b), [Fe(II)(F20-TPP)(PHPh2)2] (2a), and [Fe(II)(2,6-Cl2TPP)(PHPh2)2] (2b). Reaction of [Ru(II)(Pc)(DMSO)2] (Pc = phthalocyaninato dianion) with PH2Ph or PHPh2 gave [Ru(II)(Pc)(PH2Ph)2] (3a) and [Ru(II)(Pc)(PHPh2)2] (4). [Ru(II)(Pc)(PH2Ad)2] (3b) and [Ru(II)(Pc)(PH2Bu(t))2] (3c) were isolated by treating a mixture of [Ru(II)(Pc)(DMSO)2] and O=PCl2Ad or PCl2Bu(t) with LiAlH4. Hydrophosphination of CH2=CHR (R = CO2Et, CN) with [Ru(II)(F20-TPP)(PH2Ph)2] or [Ru(II)(F20-TPP)(PHPh2)2] in the presence of (t)BuOK led to the isolation of [Ru(II)(F20-TPP)(P(CH2CH2R)2Ph)2] (R = CO2Et, 5a; CN, 5b) and [Ru(II)(F20-TPP)(P(CH2CH2R)Ph2)2] (R = CO2Et, 6a; CN, 6b). Similar reaction of 3a with CH2=CHCN or MeI gave [Ru(II)(Pc)(P(CH2CH2CN)2Ph)2] (7) or [Ru(II)(Pc)(PMe2Ph)2] (8). The reactions of 4 with CH2=CHR (R = CO2Et, CN, C(O)Me, P(O)(OEt)2, S(O)2Ph), CH2=C(Me)CO2Me, CH(CO2Me)=CHCO2Me, MeI, BnCl, and RBr (R = (n)Bu, CH2=CHCH2, MeC[triple bond]CCH2, HC[triple bond]CCH2) in the presence of (t)BuOK afforded [Ru(II)(Pc)(P(CH2CH2R)Ph2)2] (R = CO2Et, 9a; CN, 9b; C(O)Me, 9c; P(O)(OEt)2, 9d; S(O)2Ph, 9e), [Ru(II)(Pc)(P(CH2CH(Me)CO2Me)Ph2)2] (9f), [Ru(II)(Pc)(P(CH(CO2Me)CH2CO2Me)Ph2)2] (9g), and [Ru(II)(Pc)(PRPh2)2] (R = Me, 10a; Bu(n), 10b; Bn, 10c; CH2CH=CH2, 10d; CH2C[triple bond]CMe, 10e; CH=C=CH2, 10f). X-ray crystal structure determinations revealed Fe-P distances of 2.2597(9) (1a) and 2.309(2) A (2bx 2 CH2Cl2) and Ru-P distances of 2.3707(13) (3b), 2.373(2) (3c), 2.3478(11) (4), and 2.3754(10) A (5b x 2 CH2Cl2). Both the crystal structures of 3b and 4 feature intermolecular C-H...pi interactions, which link the molecules into 3D and 2D networks, respectively.     

Hydrogenolysis of palladium(II) hydroxide, phenoxide, and alkoxide complexes

A series of pincer ((tBu)PCP)Pd(II)-OR complexes ((tBu)PCP = 2,6-bis(CH(2)P(t)Bu(2))C(6)H(3), R = H, CH(3), C(6)H(5), CH(2)C(CH(3))(3), CH(2)CH(2)F, CH(2)CHF(2), CH(2)CF(3)) were synthesized to explore the generality of hydrogenolysis reactions of palladium-oxygen bonds. Hydrogenolysis of the Pd hydroxide complex to generate the Pd hydride complex and water was shown to be inhibited by formation of a water-bridged, hydrogen-bonded Pd(II) hydroxide dimer. The Pd alkoxide and aryloxide complexes exhibited more diverse reactivity. Depending on the characteristics of the -OR ligand (steric bulk, electron-donating ability, and/or the presence of β-hydrogen atoms), hydrogenolysis was complicated by hydrolysis by adventitious water, a lack of reactivity with hydrogen, or a competing dissociative β-hydride abstraction reaction pathway. Full selectivity for hydrogenolysis was observed with the partially fluorinated Pd(II) 2-fluoroethoxide complex. The wide range of Pd-OR substrates examined helps to clarify the variety of reaction pathways available to late-transition-metal alkoxides as well as the conditions necessary to tune the reactivity to hydrogenolysis, hydrolysis, or dissociative β-hydride abstraction.     

Syntheses, derivatives, solubility, and interfacial properties of 2-methyl-2-polyfluoroalkenyloxymethyl-1,3-propanediols: potential building blocks for syntheses of amphiphatic macromolecules

2-Hydroxymethyl-2-methyl-1,3-propanediol (A) was reacted with (Me(3)Si)(2)NH and toluenesulfonyl chloride (TsCl) to give mainly CH(3)C(CH(2)OSiMe(3))(3) (1), and CH(3)C(CH(2)OTs)(3) (2), respectively. With allyl bromide, the products were CH(3)C(CH(2)OCH(2)CH[double bond]CH(2))(2)(CH(2)OH) (3) and CH(3)C(CH(2)OCH(2)CH[double bond]CH(2))(CH(2)OH)(2) x H(2)O (4). The reactions of 4 with perfluoroalkyl iodides (R(f)I) were catalyzed by Cu(I)Cl to form 2-methyl-2-polyfluoroalkenyloxymethyl-1,3-propanediols: (R(f)CH=CHCH(2)OCH(2))C(Me)(CH(2)OH)(2) [R(f) = C(4)F(9) (5), C(8)F(17) (6), and (CF(2)CF(2))(4)OCF(CF(3))(2) (7)]. Reduction of 5 and 6 with hydrogen gave two new 2-methyl-2-polyfluoroalkyloxymethyl-1,3-propanediols, 8 and 9. The sodium salt of 9 was reacted with allyl bromide or acetyl chloride to form (C(8)F(17)CH(2)CH(2)CH(2)OCH(2))C(Me)(CH(2)OX)(CH(2)OH)(2) [where X = CH(2)CH=CH(2) (10) or C(O)CH(3) (12)] and (C(8)F(17)CH(2)CH(2)CH(2)OCH(2))C(Me)(CH(2)OX)(2) [where X = CH(2)CH[double bond]CH(2) (11) or C(O)CH(3) (13)]. Reaction of tolenesulfonyl chloride with 7 gave the monotosylate, 14, as the sole product. With 4-trifluoromethylbenzyl bromide, the sodium salt of 4 gave (4-CF(3)C(6)H(4)CH(2)OCH(2))C(Me)(CH(2)CH[double bond]CH(2))(CH(2)OH) x H(2)O (15). The compounds were characterized by NMR ((1)H, (13)C, (19)F, (29)Si), GC-MS, and high-resolution MS or elemental analyses. UV evidence was obtained for partitioning of 9, 12, 14, and 15 between perfluorodecalin and n-octanol. The test compounds acted as surfactants by facilitating the solubility of phenol and Si(CH[double bond]CH(2))(4) in perfluorodecalin. The single-crystal X-ray structure of 8 was also obtained. It crystallized in the monoclinic space group P2(1)/c, and unit cell dimensions were a = 24.966(2) A (alpha = 90), b = 6.1371(6) A (beta = 100.730(2)), and c = 10.5669(10) A (gamma = 90).     

The synthesis, characterisation and reactivity of 2-phosphanylethylcyclopentadienyl complexes of cobalt, rhodium and iridium

2-Phosphanylethylcyclopentadienyl lithium compounds, Li[C(5)R'(4)(CH(2))(2)PR(2)] (R = Et, R' = H or Me, R = Ph, R' = Me), have been prepared from the reaction of spirohydrocarbons C(5)R'(4)(C(2)H(4)) with LiPR(2). C(5)Et(4)HSiMe(2)CH(2)PMe(2), was prepared from reaction of Li[C(5)Et(4)] with Me(2)SiCl(2) followed by Me(2)PCH(2)Li. The lithium salts were reacted with [RhCl(CO)(2)](2), [IrCl(CO)(3)] or [Co(2)(CO)(8)] to give [M(C(5)R'(4)(CH(2))(2)PR(2))(CO)] (M = Rh, R = Et, R' = H or Me, R = Ph, R' = Me; M = Ir or Co, R = Et, R' = Me), which have been fully characterised, in many cases crystallographically as monomers with coordination of the phosphorus atom and the cyclopentadienyl ring. The values of nu(CO) for these complexes are usually lower than those for the analogous complexes without the bridge between the cyclopentadienyl ring and the phosphine, the exception being [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (Cp' = C(5)Me(4)), the most electron rich of the complexes. [Rh(C(5)Et(4)SiMe(2)CH(2)PMe(2))(CO)] may be a dimer. [Co(2)(CO)(8)] reacts with C(5)H(5)(CH(2))(2)PEt(2) or C(5)Et(4)HSiMe(2)CH(2)PMe(2) (L) to give binuclear complexes of the form [Co(2)(CO)(6)L(2)] with almost linear PCoCoP skeletons. [Rh(Cp'(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are active for methanol carbonylation at 150 degrees C and 27 bar CO, with the rate using [Rh(Cp'(CH(2))(2)PPh(2))(CO)] (0.81 mol dm(-3) h(-1)) being higher than that for [RhI(2)(CO)(2)](-) (0.64 mol dm(-3) h(-1)). The most electron rich complex, [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (0.38 mol dm(-3) h(-1)) gave a comparable rate to [Cp*Rh(PEt(3))(CO)] (0.30 mol dm(-3) h(-1)), which was unstable towards oxidation of the phosphine. [Rh(Cp'(CH(2))(2)PEt(2))I(2)], which is inactive for methanol carbonylation, was isolated after the methanol carbonylation reaction using [Rh(Cp'(CH(2))(2)PEt(2))(CO)]. Neither of [M(Cp'(CH(2))(2)PEt(2))(CO)] (M = Co or Ir) was active for methanol carbonylation under these conditions, nor under many other conditions investigated, except that [Ir(Cp'(CH(2))(2)PEt(2))(CO)] showed some activity at higher temperature (190 degrees C), probably as a result of degradation to [IrI(2)(CO)(2)](-). [M(Cp'(CH(2))(2)PEt(2))(CO)] react with MeI to give [M(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] (M = Co or Rh) or [Ir(Cp'(CH(2))(2)PEt(2))Me(CO)]I. The rates of oxidative addition of MeI to [Rh(C(5)H(4)(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are 62 and 1770 times faster than to [Cp*Rh(CO)(2)]. Methyl migration is slower, however. High pressure NMR studies show that [Co(Cp'(CH(2))(2)PEt(2))(CO)] and [Cp*Rh(PEt(3))(CO)] are unstable towards phosphine oxidation and/or quaternisation under methanol carbonylation conditions, but that [Rh(Cp'(CH(2))(2)PEt(2))(CO)] does not exhibit phosphine degradation, eventually producing inactive [Rh(Cp'(CH(2))(2)PEt(2))I(2)] at least under conditions of poor gas mixing. The observation of [Rh(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] under methanol carbonylation conditions suggests that the rhodium centre has become so electron rich that reductive elimination of ethanoyl iodide has become rate determining for methanol carbonylation. In addition to the high electron density at rhodium.     

Photochemistry and photophysics of n-butanal, 3-methylbutanal, and 3,3-dimethylbutanal: experimental and theoretical study

Dilute mixtures of n-butanal, 3-methylbutanal, and 3,3-dimethylbutanal in synthetic air, different N(2)/O(2) mixtures, and pure nitrogen (up to 100 ppm) were photolyzed with fluorescent UV lamps (275-380 nm) at 298 K. The main photooxidation products were ethene (n-butanal), propene (3-methylbutanal) or i-butene (3,3-dimethylbutanal), CO, vinylalcohol, and ethanal. The photolysis rates and the absolute quantum yields were found to be dependent on the total pressure of synthetic air but not of nitrogen. At 100 Torr, the total quantum yield Φ(100) = 0.45 ± 0.01 and 0.49 ± 0.07, whereas at 700 Torr, Φ(700) = 0.31 ± 0.01 and 0.36 ± 0.03 for 3-methylbutanal and 3,3-dimethybutanal, respectively. Quantum yield values for n-butanal were reported earlier by Tadi? et al. (J. Photochem. Photobiol. A2001143, 169-179) to be Φ(100) = 0.48 ± 0.02 and Φ(700) = 0.32 ± 0.01. Two decomposition channels were identified: the radical channel RCHO → R + HCO (Norrish type I) and the molecular channel CH(3)CH(CH(3))CH(2)CHO → CH(2)CHCH(3) + CH(2)═CHOH or CH(3)C(CH(3))(2)CH(2)CHO → CHC(CH(3))CH(3) + CH(2)═CHOH, (Norrish type II) having the absolute quantum yields of 0.123 and 0.119 for 3-methybutanal and 0.071 and 0.199 for 3,3-dimethylbutanal at 700 Torr of synthetic air. The product ethenol CH(2)═CHOH tautomerizes to ethanal. We have performed ab initio and density functional quantum (DFT) chemical computations of both type I and type II processes starting from the singlet and triplet excited states. We conclude that the Norrish type I dissociation produces radicals from both singlet and triplet excited states, while Norrish type II dissociation is a two-step process starting from the triplet excited state, but is a concerted process from the singlet state.     

Methane activation by laser-ablated V, Nb, and Ta atoms: Formation of CH3-MH, CH2=MH2, CHMH3-, and (CH3)2MH2

Methane activation by group 5 transition-metal atoms in excess argon and the matrix infrared spectra of reaction products have been investigated. Vanadium forms only the monohydrido methyl complex (CH3-VH) in reaction with CH4 and upon irradiation. On the other hand, the heavier metals form methyl hydride and methylidene dihydride complexes (CH3-MH and CH2=MH2) along with the methylidyne trihydride anion complexes (CHMH3-). The neutral products, particularly the methylidene complex, increase markedly on irradiation whereas the anionic product depletes upon UV irradiation or addition of a trace of CCl4 or CBr4 to trap electrons. Other absorptions that emerge on irradiation and annealing increase markedly at higher precursor concentration and are attributed to a higher-order product ((CH3)2MH2)). Spectroscopic evidence suggests that the agostic Nb and Ta methylidene dihydride complexes have two identical metal-hydrogen bonds.     

One-pot route to new alpha,alpha-difluoroamides and alpha-ketoamides

New alpha,alpha-difluoroamides (4a-d, 6a-d) and alpha-ketoamides (5a-d, 7a-d) result from one-pot reactions of alpha-ketoacids, RCOCO(2)H (R = C(6)H(5), CH(3), CH(3)CH(2), thienyl) (1a-d) with bis(2-methoxyethyl)aminosulfur trifluoride [(CH(3)OCH(2)CH(2))(2)NSF(3)] (2) (Deoxofluor) or diethylaminosulfur trifluoride [(CH(3)CH(2))(2)NSF(3))] (3) (DAST). Product yields depend on reaction times and the ratio of reagents used. Longer reaction times ( approximately 36 h) with a 1:2 ratio of alpha-ketoacids and 2 or 3 gave major yields of the alpha,alpha-difluoroamides, and shorter reaction times ( approximately l h) produced alpha-ketoamides as the major products. Reactants in a 1:1 ratio resulted in alpha-ketoamides only.     

Synthesis, structure, and reactivity of fluorous phosphorus/carbon/phosphorus pincer ligands and metal complexes

Reactions of the diphosphine 1,3-C6H4(CH2PH2)2 and fluorous alkenes H2C=CHR(fn)(R(fn)=(CF2)(n-1)CF3; n = 6, 8) at 75 degrees C in the presence of AIBN give the title ligands 1,3-C6H4(CH2P(CH2CH2R(fn))2)2(3-R(fn)) and byproducts 1,3-C6H4(CH3)(CH2P(CH2CH2R(fn))2)(4-R(fn)) in 1 : 3 to 1 : 5 ratios. Workups give -R(fn) in 4--17% yields. Similar results are obtained photochemically. Reaction of 1,3-C6H4(CH2Br)2 and HP(CH2CH2R(f8))2 (5) at 80 degrees C (neat, 1 : 2 mol ratio) gives instead of simple substitution the metacyclophane [1,3-C6H4(CH2P(CH2CH2R(f8))2 CH2-1,3-C(6)H(4)CH(2)P[lower bond 1 end](CH2CH2R(f8))2C[upper bond 1 end]H2](2+)2Br-, which upon treatment with LiAlH(4) yields 3-R(f8)(20%), 4-R(f8), and other products. Efforts to better access 3-R(f8), either by altering stoichiometry or using various combinations of the phosphine borane (H3B)PH(CH2CH2R(f8))2 and base, are unsuccessful. Reactions of 3-R(fn) with Pd(O2CCF3)2 and [IrCl(COE)2]2(COE=cyclooctene) give the palladium and iridium pincer complexes (2,6,1-C6H3(CH2 P(CH2CH2R(fn))(2)(2)Pd(O2CCF3)(10-R(fn); 80-90%) and (2,6,1-C6H3(CH2P(CH2CH2R(f8))2)2)Ir(Cl)(H)(11-R(f8); 29%), which exhibit CF3C6F(11)/toluene partition coefficients of >96 : <4. The crystal structure of 10-R(f8) shows CH2CH2R(f8) groups with all-anti conformations that extend in parallel above and below the palladium square plane to create fluorous lattice domains. NMR monitoring shows a precursor to 11-R(f8) that is believed to be a COE adduct.     

Synthesis, characterisation and structures of thio-, seleno- and telluro-ether complexes of gallium(III)

The reactions of GaX3 (X = Cl, Br or I) with SMe2, SeMe2 and TeMe2 (L) in non-coordinating solvents produces only the pseudo-tetrahedral [GaX3L], which have been characterised by IR, Raman and multinuclear NMR (1H, 71Ga, 77Se or 125Te) spectroscopy, and by the crystal structure of [GaCl3(SeMe2)]. The 71Ga NMR resonances show small low frequency shifts for fixed halides as the neutral donors change from S --> Se --> Te. Bidentate ligands including MeS(CH2)2SMe, PhS(CH2)2SPh, MeSe(CH2)2SeMe, nBuSe(CH2)2Se(n)Bu and MeTe(CH2)3TeMe (L-L) also produce complexes with 4-coordinate gallium centres, [(GaX3)2(mu-L-L)], confirmed by the crystal structures of [(GaI3)2(mu-MeS(CH2)2SMe)], [(GaCl3)2(mu-PhS(CH2)2SPh)] and [(GaCl3)2(mu-nBuSe(CH2)2Se(n)Bu)]. The structural data are consistent with the weaker Lewis acidity of the gallium as the halide co-ligands become heavier. Multinuclear NMR studies suggest that in chlorocarbon solutions partial dissociation of the ligands occur, which increases with the halide co-ligand Cl < Br < I. The o-xylyl dithioether, o-C6H4(CH2SMe)2, despite being pre-organised for chelation, also forms [(GaCl3)2(mu-L-L)]. The corresponding diselenoether complex decomposes in solution with C-Se bond cleavage to form the selenonium salt [o-C6H4CH2Se(Me)CH2][GaCl4], which was structurally characterised. The ditelluroether o-C6H4(CH2TeMe)2 undergoes rapid C-Te bond fission and rearrangement upon reaction with GaCl3, and the telluronium species [o-C6H4CH2Te(Me)CH2]+ and [MeTe(CH2(o-C6H4)CH2TeMe)2]+ have been identified by ES+ mass spectrometry from their characteristic isotope patterns.     

Synthesis, structural characterization, and properties of chromium(III) complexes containing amidinato ligands and eta2-pyrazolato, eta(2)-1,2,4-triazolato, or eta1-tetrazolato ligands

Treatment of anhydrous chromium(III) chloride with 2 or 3 equivalents of 1,3-di-tert-butylacetamidinatolithium or 1,3-diisopropylacetamidinatolithium in tetrahydrofuran at ambient temperature afforded Cr(tBuNC(CH3)NtBu)2(Cl)(THF) and Cr(iPrNC(CH3)NiPr)3 in 78% and 65% yields, respectively. Treatment of Cr(tBuNC(CH3)NtBu)2(Cl)(THF) with the potassium salts derived from pyrazoles and 1,2,4-triazoles afforded Cr(tBuNC(CH3)NtBu)2(X), where X=3,5-disubstituted pyrazolato or 3,5-disubstituted 1,2,4-triazolato ligands, in 65-70% yields. X-Ray crystal structure analyses of Cr(tBuNC(CH3)NtBu)2(Me2pz) (Me2pz=3,5-dimethylpyrazolato) and Cr(tBuNC(CH3)NtBu)2(Me2trz) (Me2trz=3,5-dimethyl-1,2,4-triazolato) revealed eta2-coordination of the Me2pz and Me2trz ligands. Treatment of Cr(tBuNC(CH3)NtBu)2(Cl)(THF) with trifluoromethyltetrazolatosodium (NaCF3tetz) in the presence of 4-tert-butylpyridine afforded Cr(tBuNC(CH3)NtBu)2(CF3tetz)(4-tBupy) in 30% yield. An X-ray crystal structure determination showed eta1-coordination of the tetrazolato ligand through the 2-nitrogen atom. The complexes Cr(iPrNC(CH3)NiPr)3 and Cr(tBuNC(CH3)NtBu)2(X) are volatile and sublime with <1% residue between 120 and 165 degrees C at 0.05 Torr. In addition, these complexes are thermally stable at >300 degrees C under an inert atmosphere such as nitrogen or argon. Due to the good volatility and high thermal stability, these new compounds are promising precursors for the growth of chromium-containing thin films using atomic layer deposition.     

Chiral bidentate aminophosphine ligands: synthesis, coordination chemistry and asymmetric catalysis

Chiral aminophosphines Ph2PN(R)(CH2)nN(R)PPh2 1-4 [n= 2, R = CH(CH3)(Ph) 1; n= 3, R = CH(CH2CH3)(Ph) 2, n= 2, R = CH(CH3)(1-naphthyl) 3; n= 2, R = CH(CH3)(C6H11) 4] were synthesized by the reaction of ClPPh2 with the appropriate easily accessible enantiopure amine building blocks. For compounds 1 and 2, the corresponding selenides 5 and 6 were prepared to determine the electronic character of the phosphine moieties. By reaction of 1 with either PdCl2(cod) or PdCl(CH3)(cod) the cis-complexes 7 and 8 were obtained. The molecular structure for complex 7, cis-[PdCl2(1)], was determined by X-ray crystallography. Reaction of PtCl2(cod) with 1 or 2 yielded the corresponding monomeric cis-isomers 9 and 10. The rhodium derivative [RhCl(CO)(1)] (11) was obtained as a mixture of cis and trans-isomers. Preliminary results in the rhodium catalyzed hydroformylation of styrene and vinyl acetate, with ee's up to 51% and high regioselectivities, showed the potential of these chiral aminophosphines for homogeneous catalysis.     

The formation of the stable radicals .CH2CN, CH3.CHCN and .CH2CH2CN from the anions -CH2CN, CH3-CHCN and -CH2CH2CN in the gas phase. A joint experimental and theoretical study

Franck-Condon one-electron oxidation of the stable anions -CH2CN, CH3-CHCN and -CH2CH2CN (in the collision cell of a reverse-sector mass spectrometer) produce the radicals .CH2CN, CH3.CHCN and .CH2CH2CN, which neither rearrange nor decompose during the microsecond duration of the neutralisation-reionisation experiment. Acetonitrile (CH3CN) and propionitrile (CH3CH2CN) are known interstellar molecules and radical abstraction of these could produce energised .CH2CN and CH3.CHCN, which might react with NH2. (a known interstellar radical) on interstellar dust or ice surfaces to form NH2CH2CN and NH2CH(CH3)CN, precursors of the amino acids glycine and alanine.     

Insertion of Fluoroalkenes into Activated C-H Bonds for the Preparation of Polyfluorinated Sulfanes, Alcohols, and Acyclic and Cyclic Ethers

Free radical addition reactions of tetrahydrothiophene, pentamethylene sulfide, and 1,4-thioxane with various cyclic and acyclic per- and polyfluorinated olefins are readily initiated by di-tert-butyl peroxide, providing a convenient route for synthesizing cyclic sulfanes with fluorinated side groups. Tetrahydrothiophene reacts with hexafluoropropene, perfluoroallylbenzene, perfluorocyclobutene, and 1,2-dichlorotetrafluorocyclobutene in the presence of catalytic amounts of the peroxide to give the corresponding addition products CH(2)CH(2)CH(2)SCHCF(2)CHFCF(3) (1), CH(2)CH(2)CH(2)SCHCF(2)CHFCF(2)C(6)F(5) (2), CH(2)CH(2)CH(2)SCHCFCHFCF(2)CF(2) (3), and CH(2)CH(2)CH(2)SCHCClCHClCF(2)CF(2) (4), respectively. Pentamethylene sulfide reacts analogously with hexafluoropropene to give CH(2)CH(2)CH(2)CH(2)SCHCF(2)CHFCF(3) (8). Reaction of 1,4-thioxane with hexafluoropropene or perfluoroallylbenzene gives a mixture of two products, OCH(2)CH(2)SCH(2)CHCF(2)CHFCF(3) (9) and SCH(2)CH(2)OCH(2)CHCF(2)CHFCF(3) (10) or OCH(2)CH(2)SCH(2)CHCF(2)CHFCF(2)C(6)F(5) (11) and SCH(2)CH(2)OCH(2)CHCF(2)CHFCF(2)C(6)F(5) (12), respectively. Fluorinated alcohols C(6)F(5)CF(2)CHFCF(2)C(CH(3))(2)OH (15), C(6)F(5)CF(2)CHFCF(2)CH(CH(3))OH (16), and C(6)F(5)CF(2)CHFCF(2)CH(2)OH (17) are prepared by reacting perfluoroallylbenzene with the corresponding alcohols. When 15 is reacted with pentafluorobenzonitrile in the presence of potassium carbonate, an unexpected cyclic ether 19 is obtained as the major product in addition to C(6)F(5)CF(2)CHFCF(2)C(CH(3))(2)OC(6)F(5)CN (18). Alcohols 15-17 can be cyclized by heating with potassium carbonate to give fluorinated cyclic ethers 19-21. The X-ray crystal structures of acyclic ether 18 and cyclic ether 19 are given. Compound 18 crystallizes in the tetragonal system, space group P4(2)/n, with a = 18.471(0) ?, b = 18.471(0) ?, c = 11.702(0) ?, V = 3992.5(9) ?(3), D(calc) = 1.768 mg/m(3), Z = 8, and R = 0.0617. Compound 19 crystallizes in the triclinic system, space group P&onemacr;, with a = 8.103(3) ?, b = 8.790(3) ?, c = 9.832(3) ?, alpha = 66.25(4) degrees, beta = 72.01(3) degrees, gamma = 80.19(4) degrees, V = 608.7(4) ?(3), D(calc) = 1.845 mg/m(3), Z = 2, and R = 0.0346.     

Infrared spectrum of matrix isolated selenoformaldehyde, CH2Se, and CD2Se

Thermolysis of highly diluted (CH2Se)3 or (CD2Se)3 in a flow of argon with subsequent quenching of the products in an matrix at 15 K yields monomeric CH2Se and CD2Se, respectively. Six fundamental vibrations upsilon1 = 2972.5, upsilon2 = 1413.3, upsilon3 = 854.2, upsilon4 = 916.4, upsilon 5 = 3052.9, and upsilon 6 = 913.2 cm(-1) and two combination bands have been observed for CH2Se as well as three fundamentals of CD2Se. The vibrational wavenumbers are compared with those of CH2O and CH2S. Matrix isolated selenoformaldehyde decomposes slowly by UV photolysis to yield the CSe molecule.     

Vibrational spectra and structure of CH3Cl:H2O, CH3Cl:HDO, and CH3Cl:D2O complexes. IR matrix isolation and ab initio calculations

The infrared spectra of CH3Cl + H2O isolated in solid neon at low temperatures have been investigated. The CH3Cl + H2O system is remarkable because of its propensity to form CH3Cl:H2O and CH3Cl:(H2O)n (n > or = 2) complexes. We focus here on the CH3Cl:H2O species. Low concentration studies (0.01-0.5%) and subsequent annealing lead to formation of the 1:1 CH3Cl:H2O complex with O-H. . .Cl-C or O. . .H-C intermolecular hydrogen bonds. Vibrational modes of this complex have been detected. In addition, spectra of D2O + CH3Cl and HDO + CH3Cl have also been recorded. A detailed vibrational analysis of partially deuterated species shows that HDO is exclusively D bonded to CH3Cl. This is a consequence of the preference for HDO to form a deuterium bonding complex rather than a hydrogen bonding one.     

Synthesis, helicity, and chromism of optically active poly(phenylacetylene)s carrying different amino acid moieties and pendant terminal groups

Functional phenylacetylene derivatives containing l-alanine and l-leucine moieties with chiral menthyl and achiral n-octyl terminal groups {HC[triple bond]C-C6H4-p-CONHCH(R)CO2R': R = CH3, R'= (-)-(1R,2S,5R)-menthyl [1(-)]; R = CH2CH(CH2)3, R' = (-)-(1R,2S,5R)-menthyl [2(-)]; R'= CH2CH(CH2)3, R' = (+)-(1S,2R,5S)-menthyl [2(+)]; R'= CH2CH(CH2)3, R' = (CH2)7CH3 (2o)} are synthesized. Polymerizations of the acetylene monomers are effected by organorhodium catalysts, giving corresponding polymers P1(-), P2(-), P2(+), and P2o of high molecular weights (Mw up to 1.2 x 10(6)) in high yields (up to 89%). The polymers are thermally stable (Td >or= 300 degrees C) and soluble in common organic solvents. The polymer structures are characterized by IR, NMR, UV, and CD spectroscopies. Intense CD signals are observed in the visible spectral region, indicating that the polymer chains are taking a helical conformation with an excess of preferred handedness. The backbone conjugation and chain helicity of the polymers can be tuned by changing their molecular structures [(a)chiral pendant groups] and by applying external stimuli (solvent and pH). Addition of trifluoroacetic acid to the polymer solutions decreases their molar ellipticities and enhances their backbone conjugations, inducing a halochromism with a continuous and reversible color change (yellow <==> red).     

Transition metal complexes with wide-angle dithio-, diseleno- and ditelluroethers: properties and structural systematics

The ligands o-C(6)H(4)(CH(2)EMe)(2) (E = S or Se) have been prepared and characterised spectroscopically. A systematic study of the coordination chemistry of these, together with the telluroether analogue, o-C(6)H(4)(CH(2)TeMe)(2), with late transition metal centers has been undertaken. The planar complexes [MCl(2){o-C(6)H(4)(CH(2)SMe)(2)}] and [M{o-C(6)H(4)(CH(2)EMe)(2)}(2)](PF(6))(2) (M = Pd or Pt; E = S or Se), the distorted octahedral [RhCl(2){o-C(6)H(4)(CH(2)EMe)(2)}(2)]Y (E = S or Se: Y = PF(6); E = Te: Y = Cl) and [RuCl(2){o-C(6)H(4)(CH(2)EMe)(2)}(2)] (E = S, Se or Te), the dithioether-bridged binuclear [{RuCl(2)(p-cymene)}(2){micro-o-C(6)H(4)(CH(2)SMe)(2)}] and the tetrahedral [M'{o-C(6)H(4)(CH(2)EMe)(2)}(2)]BF(4) (M' = Cu or Ag; E = S, Se or Te) have been obtained and characterised by IR and multinuclear NMR spectroscopy ((1)H, (63)Cu, (77)Se{(1)H}, (125)Te{(1)H} and (195)Pt), electrospray MS and microanalyses. Crystal structures of the parent o-C(6)H(4)(CH(2)SMe)(2) and seven complexes are described, which show three different stereoisomeric forms for the chelated ligands, as well as the first example of a bridging coordination mode in [{RuCl(2)(p-cymene)}(2){micro-o-C(6)H(4)(CH(2)SMe)(2)}]. These studies reveal the consequences of the sterically demanding o-xylyl backbone, which typically leads to unusually obtuse E-M-E chelate angles of approximately 100 degrees .