Flow injection-solid phase spectrofluorimetric determination of pyridoxine in presence of group B-vitamins

A flow-through optosensor has been prepared for the sensitive and selective determination of pyridoxine (vitamin B₆) in aqueous solutions. The sensor was developed in conjunction with a monochannel flow-injection analysis system with fluorimetric detection using Sephadex SP-C25 resin as an active sorbent substrate. This method of determination is carried out without any derivatization. The wavelengths of excitation and emission were 295 and 385 nm, respectively. When a HCl (10^–3 mol L^–1) / NaCl (3 × 10^–2 mol L^–1) solution is used as carrier solution, the sensor responds linearly in the measuring range of 5–200, 10–400 and 50–1800 ng mL^–1 with detection limits of 0.33, 0.67, and 5.70 ng mL^–1 for 2000, 1000 and 200 μL of sample volume, respectively. The relative standard deviation for ten independent determinations is less than 0.75% for 0.2 and 1.0 mL of sample volumes used, and 1.31% for 2.0 mL of sample volume used. The method was satisfactorily applied to the determination of vitamin B₆ in pharmaceutical preparations. Received: 4 June 1998 / Revised: 16 July 1998 / Accepted: 6 August 1998     

Flow injection spectrofluorimetric determination of carvedilol mediated by micelles

We propose a novel evanescent wave scattering imaging method using an objective-type total internal reflection system to image and track single gold nanoparticles (GNPs) in solution. In this imaging system, only a millimeter-scale hole is employed to efficiently separate GNPs scattering light from the background reflected beam. The detailed experimental realization of the imaging system was discussed, and the effect of the hole size on imaging was investigated. We observed that the hole diameters from 2.5 to 4 mm are suitable to perform the scattering imaging by adjusting the incidence angle. The technology was successfully applied to track single gold nanoparticles in solution and on live cell membrane via the anti-epidermal growth factor receptor antibody. Compared to total internal fluorescence microscopy, the resonance light scattering detection has no photobleaching or blinking inherent to fluorescent dyes and quantum dots. Compared to conventional dark-field microscopy, the evanescent wave illumination can be conveniently applied to study membrane dynamics in living cells. Additionally, the objective-based configuration provides a free space above the coverslip, and allows imaging and concomitant manipulation of live cells in culture by microinjection, patch-clamping, AFM and other techniques.     

Flow injection kinetic spectrofluorimetric determination of trace amounts of osmium

A flow injection (FI) kinetic spectrofluorimetric method is described for the determination of osmium(IV) and the possible mechanism of catalytic reaction is discussed. The method is based on the fluorescence enhancing reaction of o-vanillin furfuralhydrazone (OVFH) with potassium bromate, which is catalyzed by Os(IV) in water medium at pH 6.10 and 45 degrees C. OVFH is newly synthesized and its ionization, IR and elemental analysis are established. Under these experimental conditions, the oxidized product of OVFH has excitation and emission maxima at 337 and 490 nm, respectively. The linear range of this method is 0-600 ng ml(-1) with the R.S.D. of 1.2%. The detection limit is 1.0 ng ml(-1) of Os(IV). A high analysis rate of 24 samples h(-1) is obtained by the FI method. The proposed method is applied successfully to determine Os(IV) in synthetic mixture and mineral samples, and the results are well consistent with the standard values.     

Selective determination of trace iron in different oxidation states in natural water by flow injection-solid phase spectrometry

A novel method for the selective determination of Fe(II) and Fe(III) in water using 2-nitroso-5-[N-n-propyl-N-(3-sulfopropyl)amino]phenol (PSAP) was developed. QAE-Sephadex anion exchanger packed in a flow-through cell was used as a medium not only for both the concentration and the spectrophotometric measurements of the Fe-PSAP complex, but also for reduction of the Fe(III)-PSAP complex. The PSAP complex of Fe(II) or Fe(III) was strongly adsorbed on the anion exchanger in a weakly acidic to weakly basic region, but the Fe(III) complex was readily and completely reduced to the Fe(II) complex only in a neutral to weakly alkaline region in the solid phase. These properties were utilized to determine the Fe(II) and total Fe concentration without the addition of any reducing agent. The detection limits (3σ) were 0.18 ng for Fe(II) and 0.18 ng for total Fe using a 3.2-cm(3) sample solution. The present method is applicable to the determination of dissolved iron species present at μg dm(-3) levels in natural water samples.     

Flow injection spectrofluorimetric determination of iron(III) in water using salicylic acid

A simple and fast flow injection fluorescence quenching method for the determination of iron in water has been developed. Fluorimetric determination is based on the measurement of the quenching effect of iron on salicylic acid fluorescence. An emission peak of salicylic acid in aqueous solution occurs at 409 nm with excitation at 299 nm. The carrier solution used was 2 × 10⁻⁶ mol L⁻¹ salicylic acid in 0.1 mol L⁻¹ NH₄⁺/NH₃ buffer solution at pH 8.5. Linear calibration was obtained for 5–100 μg L⁻¹ iron(III) and the relative standard deviation was 1.25 % (n = 5) for a 20 μL injection volume iron(III). The limit of detection was 0.3 μg L⁻¹ and the sampling rate was 60 h⁻¹. The effect of interferences from various metals and anions commonly present in water was also studied. The method was successfully applied to the determination of low levels of iron in real samples (river, sea, and spring waters).     

Flow injection spectrofluorimetric determination of reserpine in tablets by on-line acetone sensitized photochemical reaction

On-line photochemical reaction of reserpine in the presence of acetone was investigated. Acetone was found to speed up the on-line photochemical conversion of reserpine into an intensively fluorescent compound. Not only reaction acidity but also the acetate buffer concentration affected the on-line photochemical induced fluorescence signal. Based on the observation an automated flow injection photochemical fluorimetric approach was developed. An injected sample zone was carried by a water stream to be merged with a acetate buffer (pH 3.4) solution containing 0.02% acetone in a knotted PTFE reactor (KR), which was freely coiled around a 6-W low pressure mercury lamp. While passing the KR, reserpine was transformed into an intensively fluorescent compound. It was on-line detected in a flow-through cell at the emission wavelength of 490 nm and excitation wavelength of 386 nm. At optimized conditions, a detection limit 0.45 mug l(-1) was achieved at a sampling rate of 90 h(-1). Eleven determinations of a 0.5 mg l(-1) reserpine standard solution gave a R.S.D. of 0.3%. The linear dynamic range of reserpine calibration curve was 0.01-0.75 mg l(-1). The proposed method was applied to assay the reserpine content in tablets and to monitor the dissolution profile of reserpine tablets. Satisfactory results were obtained for both the assays and dissolution studies.     

Flow-injection spectrofluorimetric determination of ethylenethiourea

A flow-injection configuration is proposed for the fluorimetric determination of ethylenethiourea. The procedure is based on the inhibitory effect of ethylenethiourea on the oxidation of thiamine to thiochrome by mercury(II). A linear calibration graph was obtained between 0.1 and 2.0 μg mL^–1, with a sampling rate of 40 samples per hour and a relative standard deviation of about 1.11%. The usefulness of the method was tested for the determination of ethylenethiourea residues in water, milk, potatoes, pear, grape and apple. Received: 26 January 1998 / Revised: 6 April 1998 / Accepted: 9 April 1998     

Flow-injection spectrofluorimetric determination of ethylenethiourea

A flow-injection configuration is proposed for the fluorimetric determination of ethylenethiourea. The procedure is based on the inhibitory effect of ethylenethiourea on the oxidation of thiamine to thiochrome by mercury(II). A linear calibration graph was obtained between 0.1 and 2.0 μg mL^–1, with a sampling rate of 40 samples per hour and a relative standard deviation of about 1.11%. The usefulness of the method was tested for the determination of ethylenethiourea residues in water, milk, potatoes, pear, grape and apple. Received: 26 January 1998 / Revised: 6 April 1998 / Accepted: 9 April 1998     

Flow-injection spectrofluorimetric determination of paracetamol

A flow-injection spectrofluorimetric determination of paracetamol is reported, based on the oxidation of the analyte with potassium hexacyanoferrate(III) immobilized on an anion-exchange resin, the fluorescence being enhanced with N,N′-dimethylformamide. Concentrations of paracetamol in the range 0.04–17.60 mg l^?1 are determined with a relative standard deviation of 1.5%. The injection rate is 25 samples h^?1. The influence of foreign species and the determination of paracetamol in several pharamaceutical formulations are also reported.     

催化动力学荧光光谱法测定L-半胱氨酸

在pH 1.1的HCl-KCl缓冲溶液中,L-半胱氨酸可以催化溴酸钾氧化灿烂甲酚蓝的反应,使其荧光淬灭,据此建立了一种催化荧光动力学测定L-半胱氨酸的新方法.系统研究了不同环境介质与干扰物质对荧光强度的影响.方法的线性范围0.032～1.60 μg/mL,检出限为0.01 μg/mL,RSD＜5.7%.方法简便快捷,体系稳定.用于果汁与蜂蜜中L-半胱氨酸的测定,回收率在99.3%～104.0%之间.     

催化荧光光度法测定砷的研究

在硫酸介质中，痕量砷对碘酸钾与罗丹明6G的氧化还原反应有催化作用，使罗丹明6G的荧光减弱，据此建立了催化荧光法测定痕量砷的新方法。方法检出限为0.26ng/mL，测定范围4.12ng/mL-82.4ng/mL。已用于环境和生物样品测定。     

On-line electrochemical oxidation of Cr(III) for the determination of total Cr by flow injection-solid phase spectrophotometry.

A novel on-line oxidation method of ultra-trace Cr(III) dissolved in natural water has been developed using a flow electrolysis cell. This method was successfully applied to the determination of the total Cr concentration by flow injection-solid phase spectrophotometry using diphenylcarbazide as a coloring agent. With the applied potential of 1.35 V (vs. Ag/AgCl) and the flow rate of 0.80 cm(3) min(-1), Cr(III) was quantitatively oxidized to Cr(VI) at room temperature. The total Cr concentration of sub-microg dm(-3) in 3 - 4 samples could be determined within 1 h using an aqueous sample volume of 7.1 cm(3). The analytical values of the total Cr concentration in natural water were in good agreement with those obtained by ICP-MS. The detection limit of the proposed method was 0.014 microg dm(-3) (3sigma, n = 7). This method could be applied to the specific determination of Cr(III) and Cr(VI) in river water samples.     

Specific spectrofluorimetric determination of chloroquine in blood plasma

Chloroquine (? 150 ng ml^?1 is separated from its dealkylated metabolites by reacting the latter with ethylchloroformate followed by extraction of unchanged chloroquine into dilute acid. The aqueous extract is made alkaline and its fluorescence intensity (λ(ex) = 335 nm, λ(em) = 390 nm) is measured.     

Colorimetric determination of pyridoxine in pharmaceutical preparations

Summary The USP method for the determination of pyridoxine hydrochloride in pharmaceutical preparations has been modified to increase the stability of the colour, the speed of determination and the sensitivity. The reaction is carried out in propan-2-ol medium instead of water triethanolamine is used as the buffer, and iodine is used as oxidant when necessary. The colour is stable for about 45 min, the sensitivity of the reaction is greatly increased and the method takes only about a fifth of the time of the USP method.

---

Kolorimetrische Bestimmung von Pyridoxin in pharmazeutischen Präparaten

Zusammenfassung Die USP-Methode zur Bestimmung von Pyridoxinhydrochlorid in pharmazeutischen Präparaten wurde modifiziert, um die Beständigkeit der Farbe, die Geschwindigkeit der Bestimmung und deren Empfindlichkeit zu verbessern. Statt in Wasser wird die Reaktion in Propan-2-ol durchgeführt, wobei Triethanolamin als Puffer und Jod — wenn nötig — als Oxydationsmittel verwendet werden. Die Farbe ist ungefähr 45 min beständig, die Empfindlichkeit der Reaktion stark verbessert und die zur Durchführung der Methode erforderliche Zeit beträgt etwa ein Fünftel im Vergleich zur USP-Methode.

     

On-line micellar-enhanced spectrofluorimetric determination of rhodamine dye in cosmetics

A simple FI-fluorimetric analytical methodology for the continuous and sequential determination of rhodamine B (RhB) in cosmetic products has been developed and evaluated in terms of sensibility and selectivity. The influence of several surfactant solutions on RhB fluorescence signal has been studied; particular attention was paid in the aggregation behavior of RhB-SDS system. Linear response has been obtained in the range of 1.6 x 10(-9) and 1 x 10(-6) mol L(-1), with a detection limit of 5 x 10(-10) mol L(-1). The novel technique provides a simple dissolution of sample, on-line filtration with sampling rate higher than 100 samples h(-1) and has been satisfactorily applied to the RhB determination in commercial lipsticks.     

Improved spectrofluorimetric methods for determination of penicillamine in capsules

Two simple, sensitive and specific fluorimetric methods have been developed for the determination of Penicillamine (PNC), a sulphur containing compound. Method (I) involves the reaction of PNC with 2′,7′-bis(acetoxymercuri)-fluorescein (AMF) in the presence of Kolthoff’s buffer, pH 8.2, with subsequent measurement of fluorescence spectra at 520 nm (λ_Ex 497 nm). Method (II) is based on PNC being oxidized into penicillaminic acid using Cerium (IV) in an acidic medium. Method sensitivity has been improved using sodium triphosphate which enhances the luminescence intensity of Ce(III). Fluorescence spectra were then measured at 348 nm (λ_Ex 293 nm). The reaction conditions and the fluorescence spectral properties have been investigated for both methods. Under the described conditions, the proposed methods were applicable over the concentration ranges 0.0048 − 0.0288 μg mL⁻¹ and 0.096 − 0.288 μg mL⁻¹ with mean percentage recoveries 99.95 ± 1.29 and 100.04 ± 1.10 for methods I and II, respectively. The proposed methods were validated in terms of accuracy, precision, LOD and LOQ and robustness and then were successfully applied to the determination of PNC in bulk powder and in capsules as well as in the presence of the related disulphide. The results obtained were determined to be in good agreement with those obtained using a previously reported method.      

Kinetic spectrofluorimetric determination of certain cephalosporins in human plasma

An accurate, reliable, specific and sensitive kinetic spectrofluorimetric method was developed for the determination of seven cephalosporin antibiotics namely cefotaxime sodium, cephapirin sodium, cephradine dihydrate, cephalexin monohydrate, cefazoline sodium, ceftriaxone sodium and cefuroxime sodium. The method is based on their degradation under an alkaline condition producing fluorescent products. The factors affecting the degradation and the determination were studied and optimized. The reaction is followed spectrofluorimetrically by measuring the rate of change of fluorescence intensity at specified emission wavelength. The initial rate and fixed time methods were used for the construction of calibration graphs to determine the concentration of the studied drugs. The calibration graphs are linear in the concentration ranges 0.2-1.2 μg mL⁻¹ and 0.2-2.2 μg mL⁻¹ using the initial rate and fixed time methods, respectively. The results were statistically validated and checked through recovery studies. The method has been successfully applied for the determination of the studied cephalosporins in commercial dosage forms. The high sensitivity of the proposed method allows the determination of investigated cephalosporins in human plasma. The statistical comparisons of the results with the reference methods show an excellent agreement and indicate no significant difference in accuracy and precision.     

A differential spectrofluorimetric determination of adrenaline and noradrenaline

A simple, sensitive method for the differential fluorimetric determination of 0.0I–1 μg/ml amounts of adrenaline and noradrenaline is proposed. Oxidation is best done with potassium hexacyanoferrate(III) at pH 6.8. The fluorescent derivatives of adrenaline and noradrenaline, and of noradrenaline alone, are stabilized respectively with alkaline ascorbate or with cysteine-thioglycolli acid mixture, and the fluorescence is measured at 409 and 520 nm respectively.