Element speciation analysis by capillary electrophoresis

An overview of recent developments in the application of capillary electrophoresis to simultaneous separation and determination of different chemical forms of an inorganic element is presented, with particular emphasis placed on metal speciation analysis. Examples of species analysis are addressed, covering metal ions in different oxidation states, metal complexes with inorganic and organic ligands, metalloid oxoanions, organometallic compounds, ionic non-metal species, etc. The speciation performance of capillary electrophoresis is illustrated by a number of practically relevant applications. The method's strengths and current limitations with regard to chemical speciation studies are critically discussed.     

Surfactant cloud point extraction and preconcentration of organic compounds prior to chromatography and capillary electrophoresis

The use of preconcentration steps based on phase separation by the cloud point technique offers a convenient alternative to more conventional extraction systems. It has been used successfully for the preconcentration of species of widely differing character and nature, such as metal ions, proteins and other biomaterials, or organic compounds of strongly differing polarity. Here we address the most recent analytical applications of this methodology when used as an isolation and trace enrichment step prior to the analysis of organic compounds (polycyclic aromatic hydrocarbons, polychlorinated compounds, pesticides, phenolic derivatives, aromatic amines, vitamins, etc.) via liquid and gas chromatography or capillary electrophoresis.     

The potential of organic (electrospray- and atmospheric pressure chemical ionisation) mass spectrometric techniques coupled to liquid-phase separation for speciation analysis

The use of mass spectrometry based on atmospheric pressure ionisation techniques (atmospheric pressure chemical ionisation, APCI, and electrospray ionisation, ESI) for speciation analysis is reviewed with emphasis on the literature published in and after 1999. This report accounts for the increasing interest that atmospheric pressure ionisation techniques, and in particular ESI, have found in the past years for qualitative and quantitative speciation analysis. In contrast to element-selective detectors, organic mass spectrometric techniques provide information on the intact metal species which can be used for the identification of unknown species (particularly with MS–MS detection) or the confirmation of the actual presence of species in a given sample. Due to the complexity of real samples, it is inevitable in all but the simplest cases to couple atmospheric pressure MS detection to a separation technique. Separation in the liquid phase (capillary electrophoresis or liquid chromatography in reversed phase, ion chromatographic or size-exclusion mode) is particularly suitable since the available techniques cover a very wide range of analyte polarities and molecular mass. Moreover, derivatisation can normally be avoided in liquid-phase separation. Particularly in complex environmental or biological samples, separation in one dimension is not sufficient for obtaining adequate resolution for all relevant species. In this case, multi-dimensional separation, based on orthogonal separation techniques, has proven successful. ESI-MS is also often used in parallel with inductively coupled plasma MS detection. This review is structured in two parts. In the first, the fundamentals of atmospheric pressure ionisation techniques are briefly reviewed. The second part of the review discusses recent applications including redox species, use of ESI-MS for structural elucidation of metal complexes, characterisation and quantification of small organometallic species with relevance to environment, health and food. Particular attention is given to the characterisation of biomolecules and metalloproteins (metallothioneins and phytochelatins) and to the investigation of the interaction of metals and biomolecules. Particularly in the latter field, ESI-MS is the ideal technique due to the softness of the ionisation process which allows to assume that the detected gas-phase ions are a true representation of the ions or ion–biomolecule complexes prevalent in solution. It is particularly this field, important to biochemistry, physiology and medical chemistry, where we can expect significant developments also in the future.     

Microscale separation methods for enzyme kinetics assays

Miniaturization continues to be one of the leading trends in analytical chemistry and one that brings advantages that can be particularly beneficial in biochemical research. Use of a miniaturized scale enables efficient analysis in a short time and requires very small amounts of samples, solvents, and reagents. This can result in a remarkable decrease in costs of enzyme kinetics studies, especially when expensive or rare enzymes and/or substrates are involved. Free zone electrophoresis is without a doubt the most common microscale separation technique for capillary and on-chip enzyme assays. Progress and applications in this field are reviewed frequently whereas other modes of separation, although successfully applied, receive only marginal interest in such publications. This review summarizes applications of less common modes of separation in capillary or chip formats, namely micellar electrokinetic chromatography, liquid chromatography, gel electrophoresis, isoelectric focusing, and isotachophoresis. Because these techniques are based on separation mechanisms different from those of free zone electrophoresis, they can be, and have been, successfully used in cases where zone electrophoresis fails. Advantages and drawbacks of these alternative separation techniques are discussed, as also are the difficulties encountered most often and solutions proposed by different research groups.     

Trace element speciation by ICP-MS in large biomolecules and its potential for proteomics

Latest studies on the chemical association of trace elements to large biomolecules and their importance on the bioinorganic and clinical fields are examined. The complexity of the speciation of metal-biomolecules associations in various biological fluids is stressed. Analytical strategies to tackle speciation analysis and the-state-of-the-art of the instrumentation employed for this purpose are critically reviewed. Hyphenated techniques based on coupling chromatographic separation techniques with ICP-MS detection are now established as the most realistic and potent analytical tools available for real-life speciation analysis. Therefore, the status and potential of metal and semimetals elemental speciation in large biocompounds using ICP-MS detection is mainly focused here by reviewing reported metallo-complexes separations using size-exclusion (SEC), ion-exchange (IE), reverse phase chromatography (RP) and capillary electrophoresis (CE). Species of interest include coordination complexes of metals with larger proteins (e.g. in serum, breat milk, etc.) and metallothioneins (e.g. in cytosols from animals and plants) as well as selenoproteins (e.g. in nutritional supplements), DNA-cisplatin adducts and metal/semimetal binding to carbohydrates. An effort is made to assess the potential of present trace elements speciation knowledge and techniques for "heteroatom-tagged" (via ICP-MS) proteomics.     

Speciation of oxidation states of elements by capillary electrophoresis

Progress made in the last five years in the application of capillary electrophoresis methods to chemical speciation of elements is reported on the basis of over 100 literature references. The main trends observed include development of new on‐ and off‐capillary derivatization methods, application of new detection methods, and especially coupling of CE separation systems to powerful atomic spectroscopy and mass spectrometry instruments with various ionization techniques, providing either a sensitive element‐specific detection method or a third dimension for high performance separation. Besides numerous CZE and MEKC capillary electrophoresis methods only very few examples of CE speciation with capillary electrochromatography can be found. Concerning the chemical forms of elements determined, the new procedures developed are mostly focused on redox speciation of various oxidation states of elements, metal‐bound high molecular compounds, and organometallic species.     

Monolithic chromatography for elemental and speciation analysis

Monolithic supports are increasingly used in the field of chromatography. They are appropriate for different applications (e.g., separation of biomolecules, organic acids and inorganic anions). However, only a few research groups are investigating the potential of using monolithic phases for rapid separation of metal cations and elemental speciation analysis.Monolithic supports based on porous monolithic silica have been successfully applied in separation of alkaline-earth and transition-metal cations in environmental waters and high ionic-strength samples.The present review covers applications of monolithic supports for chromatographic separation of metal cations and the potential for using monolithic chromatography in elemental speciation analysis. We critically evaluate the performances and the advantages of monolithic supports and compare them to conventional particle-packed chromatographic supports.     

Liquid chromatography: a tool for the analysis of metal species

An overview is presented of classic and more recent applications of liquid chromatography for the analysis of metal species. The different approaches involving ion-exchange, ion-pair, and chelation separation mechanisms are discussed as well as the new philosophy of simply removing interferents before specific detections of metal ions (alkali and alakaline earths, rare earths, heavy and transition metals). New more selective materials enabling difficult separations and studies on multimodal or hyphenated techniques for metal speciation (e.g. arsenic and chromium) are considered.     

Application of CE–ICP–MS and CE–ESI–MS in metalloproteomics: challenges,developments, and limitations

Application of capillary electrophoresis (CE) as a high-resolution separation technique in metalloproteomics research is critically reviewed. The focus is on the requirements and challenges involved in coupling CE to sensitive element and molecule-specific detection techniques such as inductively coupled plasma mass spectrometry (ICP–MS) or electrospray ionisation mass spectrometry (ESI–MS). The complementary application of both detection techniques to the structural and functional characterisation of metal-binding proteins and their structural metal-binding moieties is emphasised. Beneficial aspects and limitations of mass spectrometry hyphenated to CE are discussed, on the basis of the literature published in this field over the last decade. Recent metalloproteomics applications of CE are reviewed to demonstrate its potential and limitations in modern biochemical speciation analysis and to indicate future directions of this technique.     

Kinetic Studies of Metal Speciation Using Inductively-Coupled Plasma Mass Spectrometry

Abstract

Kinetic studies of uptake of metal ions by the Chelex batch technique were made to determine Cd, Cu and Pb speciation in model solutions, a snow sample and a river surface water sample. Inductively-coupled plasma mass spectrometry (ICP-MS) and graphite furnace atomic absorption spectrometry (GFAAS) were used for direct determination of these metals. ICP-MS with the solution nebulization technique minimized contamination and adsorption problems involved in the discrete sampling technique of GFAAS, and hence, gave more precise and accurate results. Also, ICP-MS allowed collection of many more data points than GFAAS and was able to resolve components with similar rates of dissociation, which could not always be resolved by GFAAS with its discrete sampling technique. ICP-MS was therefore preferable to GFAAS for kinetic studies of metal speciation. The kinetic data were analyzed by the iterative deconvolution method. The applicability of the Chelex batch technique to metal speciation was validated by analysis of model solutions containing these metal ions with or without EDTA, NTA and fulvic acid. Use of the Chelex batch technique for Cd, Cu and Pb speciation in snow and river surface water samples revealed a number of kinetically distinguishable components of these metals (as complexes) ranging from one to three, probably present as aquo ions or inorganic complexes in the snow sample, and bound to macromolecules/and or colloidal materials in the river surface water sample.     

Isoelectric focusing of small non-covalent metal species from plants

IEF is known as a powerful electrophoretic separation technique for amphoteric molecules, in particular for proteins. The objective of the present work is to prove the suitability of IEF also for the separation of small, non-covalent metal species. Investigations are performed with copper-glutathione complexes, with the synthetic ligand ethylenediamine-N,N'-bis(o-hydroxyphenyl)acetic acid (EDDHA) and respective metal complexes (Fe, Ga, Al, Ni, Zn), and with the phytosiderophore 2'-deoxymugineic acid (DMA) and its ferric complex. It is shown that ethylenediamine-N,N'-bis(o-hydroxyphenyl)acetic acid and DMA species are stable during preparative scale IEF, whereas copper-glutathione dissociates considerably. It is also shown that preparative scale IEF can be applied successfully to isolate ferric DMA from real plant samples, and that multidimensional separations are possible by combining preparative scale IEF with subsequent HPLC-MS analysis. Focusing of free ligands and respective metal complexes with di- and trivalent metals results in different pIs, but CIEF is usually needed for a reliable estimation of pI values. Limitations of the proposed methods (preparative IEF and CIEF) and consequences of the results with respect to metal speciation in plants are discussed.     

Capillary Electrophoresis: Methods and Scope

Capillary electrophoresis is a new analytical technique that has seen a great upswing in recent years, because this adaptation of electrophoresis may be automated and simple, direct quantification is possible. As in conventional electrophoresis, samples with a large range of molecular weights, from inorganic ions to biopolymers such as DNA and proteins, can be separated. Uncharged molecules can also be separated when micelle-forming detergents are added to the buffer; the distribution mechanism that then comes into play increases the separation efficiency of this micellar electrokinetic chromatography. Chiral additives such as cyclodextrins make the separation of enantiomers possible. The rapid increase in the popularity of capillary electrophoresis is reflected in instrument sales and the growing number of scientific publications dealing with the method, and it seems that the future of this technique is assured.     

毛细管电泳用于形态分析

一种元素的生物可给性、环境行为和迁移性在很大程度上取决于它的形态。如不同的键合形式或氧化态，因此，作为元素物种鉴别和含量测定的形态分析变得越来越重要。毛细管电泳作为一种分离分析技术有许多优点可以满足形态分析的要求。本文从样品的预处理、毛细管电泳的修饰、进样方式、分离模式和检测等几个方面评述了毛细管电泳在形态分析中的应用。     

毛细管电泳分析中的富集技术及其应用

毛细管电泳（CE）具有分析速度快、分离效率高、样品消耗少、成本低廉等优点,已被应用于无机离子、有机小分子、蛋白质、核酸及细胞等的分析中。CE中最常用的检测方式是紫外检测（UV）,但由于常规进样样品体积小、检测光程短,CE-UV的灵敏度往往不能满足复杂样品中痕量物质直接分析的要求。CE中的在柱富集技术包括堆积、动态pH界面、吹扫和瞬间等速电泳等,可在很大程度上提高CE-UV的检测灵敏度;另外,固相和液相微萃取技术及其与在柱富集技术相结合应用在CE中也能净化样品基质,进一步提高富集倍数,改善分析灵敏度,从而拓宽了CE-UV在复杂样品分析中的应用范围。     

Microfluidic chip electrophoresis for biochemical analysis

Microfluidic chip electrophoresis has been widely employed for separation of various biochemical species owing to its advantages of low sample consumption, low cost, fast analysis, high throughput, and integration capability. In this article, we reviewed the development of four different modes of microfluidics‐based electrophoresis technologies including capillary electrophoresis, gel electrophoresis, dielectrophoresis, and field (electric) flow fractionation. Coupling detection schemes on microfluidic electrophoresis platform were also reviewed such as optical, electrochemical, and mass spectrometry method. We further discussed the innovative applications of microfluidic electrophoresis for biomacromolecules (nucleic acids and proteins), biochemical small molecules (amino acids, metabolites, ions, etc.), and bioparticles (cells and pathogens) analysis. The future direction of microfluidic chip electrophoresis was predicted.     

Analytical separations of lanthanides and actinides by capillary electrophoresis

The separation of lanthanide and actinide elements belongs to one of the most challenging tasks of the separation science, due to a great similarity in their physical and chemical properties. The electrophoretic separation can be accomplished in the presence of suitable complex-forming agents, from which alpha-hydroxyisobutyric acid (HIBA) has been used most often. In the most effective capillary electrophoretic mode--capillary zone electrophoresis (CZE)--a complete separation of lanthanide ions can be accomplished within a few minutes. Various electrophoretic methods can be relatively easily adopted for the determinations of individual lanthanide elements in certain kinds of technical materials, concentrates, precursors, etc., where the high speed and low costs of analysis characteristics of capillary electrophoresis (CE) may be advantageously exploited. Electrophoretic techniques may also be employed for speciation studies, especially for examinations of the behavior of actinides in the environment.     

Separation of metal ions by capillary electrophoresis with a complexing electrolyte

Excellent separations of metal ions can be obtained very quickly by capillary electrophoresis provided a weak completing reagent is incorporated into the electrolyte to alter the effective mobilities of the sample ions. Indirect photometric detection is possible by also adding a UV-sensitive ion to the electrolyte. Separations are described using phthalate, tartrate, lactate or hydroxyisobutyrate as the complexing reagent. A separation of twenty-seven metal ions was achieved in only 6 min using a lactate system. A mechanism for the separation of lanthanides is proposed for the hydroxyisobutyrate system.     

Solid phase microextraction as a tool for trace element speciation

Applications of solid phase microextraction (SPME) for trace element speciation are reviewed. Because of the relative novelty of the technique in the inorganic analytical field, the first part of this review provides a short overview of the principles of SPME operation; the second part describes typical SPME applications to elemental speciation. Volatile organometallic compounds can be collected by SPME from the sample headspace or liquid phase, directly or after derivatization. The usual separation method for the collected volatile species is gas chromatography. Non-volatile analyte species can be collected from the sample liquid phase and separated by liquid chromatography or capillary electrophoresis. Currently, most SPME applications in the inorganic field comprise analyte ethylation and headspace extraction followed by gas chromatographic separation of tin, lead and mercury species. The use of SPME for the study of equilibria in complex systems is also discussed and future roles of solid phase microextraction in the inorganic analytical field are raised.     

Use of inorganic, complex-forming ions for selectivity enhancement in capillary electrophoretic separation of organic compounds

Capillary electrophoresis (CE) is a powerful separation method based on the migration of charged species under the influence of electric field. The main merits of CE are high separation efficiency, short analysis time and small consumption of solvents and samples. However, the main drawbacks of CE are generally lower sensitivity compared to classical column-chromatographic methods.Selectivity and/or sensitivity of CE separation can be improved by forming complexes between analytes and a complex-forming reagent present as an additive in the background electrolyte (BGE). We focus this review primarily on the application of inorganic complex-forming reagents added to the BGE to separate organic ligands. We briefly mention common CE separations of inorganic analytes (mainly metal ions) using BGEs with organic ligands (e.g., hydroxycarboxylic or aminopolycarboxylic acids) as selectors.The review involves brief theoretical consideration of the significance of the effect of complex formation on separation selectivity and/or sensitivity in CE, but the major topic is critical evaluation of different inorganic complex-forming reagents used recently in the CE analysis of organic compounds, including:

(i)

borate, tungstate and molybdate in separating organic compounds possessing vicinal -OH groups;

(ii)

ligand-exchange CE and capillary electrochromatography in chiral analysis; and,

(iii)

the role of metal ions as central ions employed for selectivity enhancement of CE separation of various classes of organic compounds, including biopolymers.

     

Advances in analytical methodology for bioinorganic speciation analysis: metallomics, metalloproteomics and heteroatom-tagged proteomics and metabolomics

The recent developments in analytical techniques capable of providing information on the identity and quantity of heteroatom-containing biomolecules are critically discussed. Particular attention is paid to the emerging areas of bioinorganic analysis including: (i) a comprehensive analysis of the entirety of metal and metalloid species within a cell or tissue type (metallomics), (ii) the study of the part of the metallome involving the protein ligands (metalloproteomics), and (iii) the use of a heteroelement, naturally present in a protein or introduced in a tag added by means of derivatisation, for the spotting and quantification of proteins (heteroatom-tagged proteomics). Inductively coupled plasma mass spectrometry (ICP MS), used as detector in chromatography and electrophoresis, and supported by electrospray and MALDI MS, appears as the linchpin analytical technique for these emerging areas. This review focuses on the recent advances in ICP MS in biological speciation analysis including sensitive detection of non-metals, especially of sulfur and phosphorus, couplings to capillary and nanoflow HPLC and capillary electrophoresis, laser ablation ICP MS detection of proteins in gel electrophoresis, and isotope dilution quantification of biomolecules. The paper can be considered as a followup of a previous review by the author on a similar topic (J. Szpunar, Analyst, 2000, 125, 963).