Selective isolation of N-terminal peptides from proteins and their de novo sequencing by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry without regard to unblocking or blocking of N-terminal amino acids

We have developed a new method to determine the N-terminal amino acid sequences of proteins, regardless of whether their N-termini are modified. This method consists of the following five steps: (1) reduction, S-alkylation and guanidination for targeted proteins; (2) coupling of sulfo-NHS-SS-biotin to N(alpha)-amino groups of proteins; (3) digestion of the modified proteins by an appropriate protease followed by oxidation with performic acid; (4) specific isolation of N-terminal peptides from digests using DITC resins; (5) de novo sequence analysis of the N-terminal peptides by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) using the CAF (chemically assisted fragmentation) method or tandem mass spectrometric (MS/MS) analysis according to unblocked or blocked peptides, respectively. By employing DITC resins instead of avidin resins used in our previous method (Yamaguchi et al., Rapid Commun. Mass Spectrom. 2007; 21: 3329), it has been possible to isolate selectively N-terminal peptides from proteins regardless of modification of N-terminal amino acids. Here we propose a universal method for N-terminal sequence analysis of proteins.     

Isotope-coded N-terminal sulfonation of peptides allows quantitative proteomic analysis with increased de novo peptide sequencing capability

Recently various methods for the N-terminal sulfonation of peptides have been developed for the mass spectrometric analyses of proteomic samples to facilitate de novo sequencing of the peptides produced. This paper describes the isotope-coded N-terminal sulfonation (ICenS) of peptides; this procedure allows both de novo peptide sequencing and quantitative proteomics to be studied simultaneously. As N-terminal sulfonation reagents, 13C-labeled 4-sulfophenyl[13C6]isothiocyanate (13C-SPITC) and unlabeled 4-sulfophenyl isothiocyanate (12C-SPITC) were synthesized. The experimental and reference peptide mixtures were derivatized independently using 13C-SPITC and 12C-SPITC and then combined to generate an isotopically labeled peptide mixture in which each isotopic pair differs in mass by 6 Da. Capillary reverse-phase liquid chromatography/tandem mass spectrometry experiments on the resulting peptide mixtures revealed several immediate advantages of ICenS in addition to the de novo sequencing capability of N-terminal sulfonation, namely, differentiation between N-terminal sulfonated peptides and unmodified peptides in mass spectra, differentiation between N- and C-terminal fragments in tandem mass spectra of multiply protonated peptides by comparing fragmentations of the isotopic pairs, and relative peptide quantification between proteome samples. We demonstrate that the combination of N-terminal sulfonation and isotope coding in the mass spectrometric analysis of proteomic samples is a viable method that overcomes many problems associated with current N-terminal sulfonation methods.     

Dimethyl isotope labeling assisted de novo peptide sequencing

Here, we explore a de novo sequencing strategy in which we combine Lys-N protein digestion with differential isotopic dimethyl labeling to facilitate the (de novo) identification of multiply charged peptides in ESI-MS, both under CID and ETD conditions. For a large fraction of the Lys-N generated peptides, all primary amines are present at the N-terminal lysine, enabling specific labeling of the N-terminus. Differential derivatization of only the peptide N-terminus in combination with the simultaneous fragmentation of the corresponding isotopologues allows the straightforward distinction of N-terminal fragments from C-terminal and internal fragments. Furthermore, also singly and multiply charged N-terminal fragments can easily be distinguished due to the mass differences of the isotope labeled fragment pairs. As a proof of concept, we applied this approach to proteins isolated from an avocado fruit, and were able to partially de novo sequence and correctly align, with green plant homologues, a previously uncharacterized avocado ascorbate peroxidase.     

Nanografting de novo proteins onto gold surfaces

The immobilization of novel proteins onto addressable locations on a flat surface has potential applications in a range of biotechnologies. Here we describe the nanopatterning of a de novo protein onto a gold surface. Patterning was achieved using a technique called nanografting, in which the tip of an atomic force microscope is used to disrupt a preexisting monolayer of alkanethiol molecules on a gold surface, thereby facilitating exchange with alternative thiol-linked molecules from the surrounding solution. The protein used for these studies was chosen from a designed combinatorial library of de novo sequences expressed in E. coli and was engineered to have a glycine-glycine-cysteine tag at its C-terminus, thereby enabling attachment to the gold surface through a single cysteine thiol. The average height of the grafted protein patterns was found to be somewhat higher than expected from the known NMR structure of the protein. Compression of the nanografted patches by an external force (below 10 nN) was reversible but showed some hysteresis. Interestingly, both the energy required to deform the immobilized protein patterns and the energy defined by the hysteresis loop were found to be of the same order as the energy required to unfold the monomeric protein in solution. These studies demonstrate the possibility of preparing nanometer scale protein arrays, lowering significantly the volume requirements of the protein samples necessary to fabricate protein-based biosensor arrays and thereby providing a base for increasing their sensitivity.     

Synthesis of high-capacity immunoaffinity sorbents with oriented immobilized immunoglobulins or their Fab' fragments for isolation of proteins

Two methods for synthesizing high-capacity immunoaffinity sorbents on Sepharose and Separon HEMA E-1000 are described. The first is the oriented immobilization of monovalent immunoglobulin Fab fragments on a maleimide derivative of Sepharose via the formation of a covalent bond between the SH group of the Fab fragment at the C-terminus of the molecule and the maleimide covalently coupled to Sepharose. The second method is based on the oxidation of the immunoglobulin carbohydrate component, located in the Fc fragment, by periodate with subsequent immobilization of the derivatives on hydrazide derivatives of Sepharose or Separon. Sorbents for the isolation of monoclonal antibodies from the culture supernatants and the elongation factor EF-G from a crude extract of Escherichia coli cells were obtained. These sorbents are characterized by a high capacity, minimal non-specific sorption and high stability.     

Automated de novo sequencing of nucleic acids by liquid chromatography-tandem mass spectrometry

We present the first global computer-aided sequencing algorithm for the de novo determination of short nucleic acid sequences. The method compares the fragment ion spectra generated by collision-induced dissociation of multiply charged oligodeoxynucleotide-ions to the m/z values predicted employing established fragmentation pathways from a known reference sequence. The closeness of matching between the measured spectrum and the predicted set of fragment ions is characterized by the fitness, which takes into account the difference between measured and predicted m/z values, the intensity of the fragment ions, the number of fragments assigned, and the number of nucleotide positions not covered by fragment ions in the experimental spectrum. Smaller values for the fitness indicate a closer match between the measured spectrum and predicted m/z values. In order to find the sequence most closely matching the experimental spectrum, starting from a given nucleotide composition all possible oligonucleotide sequences are assembled followed by identification of the correct sequence by the lowest fitness value. Using this concept, sequences of 5- to 12-mer oligodeoxynucleotides were successfully de novo determined. High sequence coverage with fragment ions was essential for obtaining unequivocal sequencing results. Moreover, the collision energy was shown to have an impact on the interpretability of tandem mass spectra by the de novo sequencing algorithm. Experiments revealed that the optimal collision energy should be set to a value just sufficient for complete fragmentation of the precursor ion.     

Exhaustive de novo design of low-molecular-weight fragments against the ATP-binding site of DNA-gyrase

We present a de novo design approach to generating small fragments in the DNA-gyrase ATP-binding site using the computational drug design platform SkelGen. We have generated an exhaustive number of structural possibilities, which were subsequently filtered for site complementarity and synthetic tractability. A number of known active fragments are found, but most of the species created are potentially novel and could be valuable for further elaboration and development into lead-like structures.     

Preparation of de novo globular proteins based on proline dendrimers

A synthetic method for the preparation of protein-like globular dendrimers derived from a combination of proline, glycine and imidazolidin ring as branching unit is described. The methodology allows the synthesis of novel peptide dendrimers up to fourth generation. Dendrimers were synthesized by a convergent solid-phase peptide synthesis approach. The conformational properties of branched polyproline peptides and proline dendrimers were studied by CD experiments. CD data suggest conformational plasticity of branched peptides for PPI and PPII, and a stable well-defined secondary structure of proline dendrimers for PPII.     

Carbon monoxide binding by de novo heme proteins derived from designed combinatorial libraries.

Carbon monoxide binding was studied in a collection of de novo heme proteins derived from combinatorial libraries of sequences designed to fold into 4-helix bundles. The design of the de novo sequences was based on the previously reported "binary code" strategy, in which the patterning of polar and nonpolar amino acids is specified explicitly, but the exact identities of the side chains are varied extensively.(1) The combinatorial mixture of amino acids included histidine and methionine, which ligate heme iron in natural proteins. However, no attempt was made to explicitly design a heme binding site. Nonetheless, as reported previously, approximately half of the binary code proteins bind heme.(2) This collection of novel heme proteins provides a unique opportunity for an unbiased assessment of the functional potentialities of heme proteins that have not been prejudiced either by explicit design or by evolutionary selection. To assess the capabilities of the de novo heme proteins to bind diatomic ligands, we measured the affinity for CO, the kinetics of CO binding and release, and the resonance Raman spectra of the CO complexes for eight de novo heme proteins from two combinatorial libraries. The CO binding affinities for all eight proteins were similar to that of myoglobin, with dissociation constants (K(d)) in the low nanomolar range. The CO association kinetics (k(on)) revealed that the heme environment in all eight of the de novo proteins is partially buried, and the resonance Raman studies indicated that the local environment around the bound CO is devoid of hydrogen-bonding groups. Overall, the CO binding properties of the de novo heme proteins span a narrow range of values near the center of the range observed for diverse families of natural heme proteins. The measured properties of the de novo heme proteins can be considered as a "default" range for CO binding in alpha-helical proteins that have neither been designed to bind heme or CO, nor subjected to genetic selections for heme or CO binding.     

PEAKS: powerful software for peptide de novo sequencing by tandem mass spectrometry

A number of different approaches have been described to identify proteins from tandem mass spectrometry (MS/MS) data. The most common approaches rely on the available databases to match experimental MS/MS data. These methods suffer from several drawbacks and cannot be used for the identification of proteins from unknown genomes. In this communication, we describe a new de novo sequencing software package, PEAKS, to extract amino acid sequence information without the use of databases. PEAKS uses a new model and a new algorithm to efficiently compute the best peptide sequences whose fragment ions can best interpret the peaks in the MS/MS spectrum. The output of the software gives amino acid sequences with confidence scores for the entire sequences, as well as an additional novel positional scoring scheme for portions of the sequences. The performance of PEAKS is compared with Lutefisk, a well-known de novo sequencing software, using quadrupole-time-of-flight (Q-TOF) data obtained for several tryptic peptides from standard proteins.     

Selectivity over coverage in de novo sequencing of IgGs

Although incredibly diverse in specificity, millions of unique Immunoglobulin G (IgG) molecules in the human antibody repertoire share most of their amino acid sequence. These constant parts of IgG do not yield any useful information in attempts to sequence antibodies de novo. Therefore, methods focusing solely on the variable regions and providing unambiguous sequence reads are strongly advantageous. We report a mass spectrometry-based method that uses electron capture dissociation (ECD) to provide straightforward-to-read sequence ladders for the variable parts of both the light and heavy chains, with a preference for the functionally important CDR3. We optimized this method on the therapeutic antibody Trastuzumab and demonstrate its applicability on two monoclonal quartets of the four IgG subclasses, IgG1, IgG2, IgG3 and IgG4. The method is based on proteolytically separating the variable F(ab′)₂ part from the conserved Fc part, whereafter the F(ab′)₂ portions are mass-analyzed and fragmented by ECD. Pure ECD, without additional collisional activation, leads to straightforward-to-read sequence tags covering the CDR3 of both the light and heavy chains. Using molecular modelling and structural analysis, we discuss and explain this selective fragmentation behavior and describe how structural features of the different IgG subclasses lead to distinct fragmentation patterns. Overall, we foresee that pure ECD on F(ab′)₂ or Fab molecules can become a valuable tool for the de novo sequencing of serum antibodies.     

An effective method for de novo peptide sequencing based on phosphorylation strategy and mass spectrometry

An effective method for peptide sequencing based on phosphorylation strategy and UPLC-MS/MS is proposed in this report. A phosphorylation reaction was carried out by mixing model peptide solution with phosphorylation solution. UPLC-MS/MS was used to analyze and characterize the phosphorylated peptides in the optimized ramp collision energy mode. The results illustrated that this phosphorylation approach significantly strengthened the signal intensity of both a₁ and b series ions of the spectra of the modified peptides. It also can be used to effectively distinguish glutamine (Q) and lysine (K) residues in peptides. The feasibility of this approach was validated by analyzing the trypsin-digested BSA. Data suggested that this proposed method could be a useful tool for the de novo peptide sequencing in proteome research.     

Intelligent design: the de novo engineering of proteins with specified functions

One of the principal successes of de novo protein design has been the creation of small, robust protein-cofactor complexes which can serve as simplified models, or maquettes, of more complicated multicofactor protein complexes commonly found in nature. Different maquettes, generated by us and others, recreate a variety of aspects, or functional elements, recognized as parts of natural enzyme function. The current challenge is to both expand the palette of functional elements and combine and/or integrate them in recreating familiar enzyme activities or generating novel catalysis in the simplest protein scaffolds.     

Electrochemical and spectroscopic investigations of immobilized de novo designed heme proteins on metal electrodes.

On the basis of rational design principles, template-assisted four-helix-bundle proteins that include two histidines for coordinative binding of a heme were synthesized. Spectroscopic and thermodynamic characterization of the proteins in solution reveals the expected bis-histidine coordinated heme configuration. The proteins possess different binding domains on the top surfaces of the bundles to allow for electrostatic, covalent, and hydrophobic binding to metal electrodes. Electrostatic immobilization was achieved for proteins with lysine-rich binding domains (MOP-P) that adsorb to electrodes covered by self-assembled monolayers of mercaptopropionic acid, whereas cysteamine-based monolayers were employed for covalent attachment of proteins with cysteine residues in the binding domain (MOP-C). Immobilized proteins were studied by surface-enhanced resonance Raman (SERR) spectroscopy and electrochemical methods. For all proteins, immobilization causes a decrease in protein stability and a loosening of the helix packing, as reflected by a partial dissociation of a histidine ligand in the ferrous state and very low redox potentials. For the covalently attached MOP-C, the overall interfacial redox process involves the coupling of electron transfer and heme ligand dissociation, which was analyzed by time-resolved SERR spectroscopy. Electron transfer was found to be significantly slower for the mono-histidine-coordinated than for the bis-histidine-coordinated heme. For the latter, the formal heterogeneous electron-transfer rate constant of 13 s(-1) is similar to those reported for natural heme proteins with comparable electron-transfer distances, which indicates that covalently bound synthetic heme proteins provide efficient electronic communication with a metal electrode as a prerequisite for potential biotechnological applications.     

An algorithm for interpretation of low-energy collision-induced dissociation product ion spectra for de novo sequencing of peptides

An algorithm for interpretation of product ion spectra of peptides generated from ion trap mass spectrometry is developed for de novo amino acid sequencing of peptides for the purpose of protein identification. It is based on a multi-pass analysis of product ion data using a rigorous data extraction and sequence interpretation protocol in the initial pass. The extraction/interpretation algorithm becomes more relaxed in subsequent passes, considering more of the fragment ions, and potentially more sequence candidates. The possible peptide sequences generated by the algorithm are scored according to those sequences which best explain the fragment ion spectrum. These sequences are searched against a protein database using a BLAST search engine to find likely protein candidates. The method is also suitable for locating and determining protein modifications, and can be applied to de novo interpretation of peptide fragment ions in the tandem mass (MS/MS) spectrum produced from a mixture of two peptides having similar nominal mass, but different sequences. Using a known protein, bovine serum albumin, as an example, it is illustrated that this method is rapid and efficient for MS/MS spectral interpretation. This method combined with BLAST programs is then applied to search homologies and to generate information on post-translational modifications of an unknown protein isolated from shark cartilage that does not have a complete genome or proteome database.     

An improved method for de novo sequencing of arginine-containing, Nalpha-tris(2,4,6-trimethoxyphenyl)phosphonium-acetylated peptides

An improved method for de novo sequencing of arginine-containing peptides modified with succinimidyloxycarbonylmethyl tris(2,4,6-trimethoxyphenyl)phosphonium bromide (TMPP-Ac-OSu) is reported. A tagging reagent, TMPP-Ac-OSu, was introduced to improve the sequence analysis of peptides owing to the simplified fragmentation pattern. However, peptides containing arginine residues did not fragment efficiently even after TMPP-Ac modification at their N-termini. This report describes how fragmentation efficiency of TMPP-Ac-modified arginine-containing peptides was significantly improved by modifying the guanidino group on the side chain of arginine with acetylacetone.     

N-Glycosidase treatment with 18O labeling and de novo sequencing argues for flagellin FliC glycopolymorphism in Pseudomonas aeruginosa

In prokaryote organisms, N-glycosylation of proteins is often correlated to cell–cell recognition and extracellular events. Those glycoproteins are potential targets for infection control. To date, many surface-glycosylated proteins from bacterial pathogens have been described. However, N-linked Pseudomonas surface-associated glycoproteins remain underexplored. We report a combined enrichment and labeling strategy to identify major glycoproteins on the outside of microorganisms. More precisely, bacteria were exposed to a mix of biotinylated lectins able to bind with glycoproteins. The latter were then recovered by avidin beads, digested with trypsin, and submitted to mass spectrometry. The targeted mixture of glycoproteins was additionally deglycosylated in the presence of H₂ ¹⁸O to incorporate ¹⁸O during PNGase F treatment and were also analyzed using mass spectrometry. This approach allowed us to identify a few tens of potential N-glycoproteins, among which flagellin FliC was the most abundant. To detect the possible sites of FliC modifications, a de novo sequencing step was also performed to discriminate between spontaneous deamidation and N-glycan loss. This approach led to the proposal of three potential N-glycosylated sites on the primary sequence of FliC: N26, N69, and N439, with two of these three asparagines belonging to an N-X-(S/T) consensus sequence. These observations suggest that flagellin FliC is a heterogeneous protein mixture containing both O- and N-glycoforms.

De novo design of a stable N-terminal helical foldamer

A peptide NTH-18 was synthesized in which a N-terminal helix is stabilised by two crossed disulfide bonds to a C-terminal extension. The design was inspired by the structure of the neurotoxic peptide apamin, which has previously been used to stabilise helices in miniature enzymes. CD- and NMR-spectroscopy indicated that NTH-18 adopted a fold similar to that found in apamin. However, the arrangement of the elements of secondary structures was inverted relative to apamin; a N-terminal alpha-helix was connected by a reverse turn to a C-terminal extension of non-canonical secondary structure. NTH-18 displayed significant stability to heat and changes of pH. The high definition of the N-terminal end of the alpha-helix of NTH-18 should make this peptide a useful vehicle to stabilise alpha-helices in proteins with applications in protein engineering and molecular recognition.     

Oxidation versus carboxamidomethylation of s-s bond in ranid frog peptides: Pro and contra for de novo MALDI-MS sequencing

Five natural peptides isolated from ranid skin secretions of European frog species of Rana ridibunda and Rana arvalis (molecular masses 3516, 2674, 2636, 1874, and 1810 Da) were studied by MALDI-TOF/TOF to compare two procedures of disulfide bond cleavage: (1) performic oxidation and (2) reduction/carboxamidomethylation. The processes are relevant for the elucidation of the amino acid sequence inside the seven-member cystine ring at the C-terminus. The results clearly demonstrated that oxidation of the disulfide bond led to notably higher abundances of b- and y-ions, corresponding to the C-terminal peptide bonds, than reduction/carboxamidomethylation. This conclusion is true for all five peptides studied. Besides that, the oxidation procedure is simpler than carboxamidomethylation, as it is a one-step process with no purification required. The oxidation is more reproducible. The results were similar each time the peptide was subjected to the process. It was successfully applied to all five peptides while reduction/carboxamidomethylation failed in the case of brevinin-1Ra, despite all variations of reaction conditions.