Strategies to vectorize conventional SCF-Cl algorithms

Recent high-performance computers, especially supercomputers, achieve very high-speed operations but bring about serious I/O problems in quantum chemical computations. Strategies to vectorize conventional SCF-CI algorithms are discussed relating to the I/O problems. The conventional SCF-CI algorithm which is proposed here reduces I/O processing by eliminating all sorting routines and redundant integral files and generates directly nonzero and nonredundant PK integrals with a vectorizable canonically-ordered list. The new implementation has been undertaken and successfully realized as a program system named GSCF3. The vector to scalar acceleration rate of GSCF3 on the HITAC S-810 are as follows: 2.5 5 in the AO integral evaluation, 5 12 in the SCF calculation, 15 30 in the four-index integral transformation, 10 20 in the CI matrix diagonalization, and overall 510 through SCF-CI.     

Structure Formation in Carbon Fibers in the Course of Flash High-Temperature Treatment

The size of coherent scattering regions formed in carbon fibers was studied as influenced by the preparation conditions of the initial polyacrylonitrile thread and conditions of preliminary (200°C) and flash high-temperature (2400 and 3200°C) thermomechanical treatments.     

Donorstärken in 1,2-Dichloräthan

Zusammenfassung Kalorimetrische und spektrophotometrische Untersuchungen über die Donorstärke einer Anzahl nicht-wäßriger Lösungsmittel zeigen, daß die relative Reihung der Donorstärken unabhängig von der Natur des Akzeptors ist. Die Donorreihung lautet gegenüber SbCl₅, Jod und Phenol folgendermaßen: Pyridin > Dimethylsulfoxid > Dimethylacetamid Dimethylformamid > > Trimethylphosphat Diphenylphosphoroxychlorid > Diäthyläther > Aceton > Propandiol-1,2-carbonat > Acetonitril > > Selenoxychlorid Phosphoroxychlorid Benzoylchlorid > > Thionylchlorid > Sulfurylchlorid.

---

Calorimetric and spectrophotometric work on the donor strength of various non-aqueous solvents have shown that the relative order of donor strength is independent from the nature of the acceptor. The order of donor strength towards SbCl₅, I₂ and phenole is pyridine > dimethylsulfoxide > dimethylacetamide dimethylformamide > trimethylphosphate diphenylphosphonic chloride > diethyl ether > acetone > propane diol-1,2-carbonate > acetonitrile > selenium oxychloride phosphorus oxychloride benzoyl chloride > thionyl chloride > sulfuryl chloride.

---

---

Mit 1 Abbildung     

Gamma radiolysis of Methyl Red solution and reaction induced by γ-irradiated NaCl in Methyl Red

The -radiolysis of Methyl Red solution in HCl medium at pH=2 has been studied along with energy transfer reaction brought about byF and hole centers of -irradiated NaCl. The G-values for degradation of the azo dye indicator by radiolysis and -irradiated salt were determined as 9·10^–1 and 4.8·10^–3, respectively. The kinetic rate constants (k) of degradation are evaluated as 2·10^–5 rad^–1 in the case of direct radiolysis, while for the irradiated salt it is 2·10^–7 rad^–1. The extent of degradation by direct -radiolysis is 100–200 times greater as compared to that by the -irradiated salt. The same mechanism is proposed for radiolysis as well as the reaction induced by -irradiated sodium chloride.     

Simple screening method for the fast determination of clenbuterol in animal feeds

Summary A simple method for the determination of clenbuterol is described. It is extracted from the sample at pH 3 and then at pH 11, followed by partitioning the analyte into water at pH 3 and reextraction into ethyl acetate at pH 9. Clenbuterol is oxidized with KMnO₄ to clenbuteron for GC-determination. Recoveries for 0.01– 1.0 mg/kg were between 70% and 110% (standard deviation ±14%, n = 18).

---

Eine einfache Screening-Methode zur schnellen Bestimmung von Clenbuterol in tierischen Futtermitteln

     

Effect of hydrothermal treatment on catalytic properties of superhigh-silica zeolites

The effect of hydrothermal treatment of decationized superhigh-silica zeolite on the mechanism of n-hexane conversion has been studied. It has been established that thermosteam modification sharply decreases the cracking activity and increases the selectivity to aromatization reactions. Zeolite acidity markedly decreases, but its crystal structure does not become amorphous.

---

-. . .

     

On the use of a dead-time meter for pile-up corrections

Correction for pile-up losses in the amplifier is possible by the dead-time fraction indicator of the ADC in case of long-lived radionuclides. If the dead-time meter has been calibrated, an accuracy of 1.5% is feasible up to a dead-time fraction of 25%. The precision decreases from 1.5% at 10% dead-time fraction to 3% at a deadtime fraction of 30%.     

Effect of heating rate on the thermal decomposition of lead dioxide

Experimental data are presented on the kinetics and mechanism of PbO₂ decomposition at heating rates varying from 0 to 2.5 · 10³ °/sec. The studies were carried out with a time-of-flight mass spectrometer MSKH-4, a Paulik-Paulik-Erdey derivatograph and an X-ray diffractometer DRON-0.5At low heating rates (0 to 0.2 °/s) oxygen is evolved in four stages: PbO₂ PbO_1.56 PbO_1.44 PbO. At extremely high heating rates (2 · 10²–2.5 · 10³ °/s) the number of stages is reduced to two: PbO₂ PbO_1.4 PbO. An attempt is made to connect the observed change in the decomposition mechanism of PbO₂ with the crystal structure formation of the lead oxides.

---

Zusammenfassung Versuchsergebnisse bezüglich der Kinetik und des Mechanismus der Zersetzung von PbO₂ bei Aufheizgeschwindigkeiten zwischen 0 und 2.5 · 10³°/s werden mitgeteilt. Die Untersuchungen wurden mittels eines time-of-flight Massenspektrometers MSKH-4, eines Derivatographen des Typs Paulik-Paulik-Erdey und eines Röntgendiffraktometers DRON-0.5 durchgeführt.Bei niedrigen Aufheizgeschwindigkeiten (0 bis 0.2 °/sec) wird Sauerstoff in vier Stufen entwickelt: PbO₂ PbO_1.56 PbO_1.44 PbO. Bei extrem hohen Aufheizgeschwindigkeiten (2 · 10² – 2.5 · 10³°/s) wird die Zahl der Stufen auf zwei herabgesetzt: PbO₂ PbO_1.4 PbO. Es wird versucht die beobachtete Ánderung in dem Zersetzungsmechanismus von PbO₂ mit der Kristallstrukturbildung der Bleioxide in Verbindung zu bringen.

---

Résumé On présente des résultats expérimentaux concernant la cinétique et le mécanisme de la décomposition de PbO₂ pour des vitesses de chauffage allant de 0 à 2.5 · 10³°/s. Les études ont été effectuées à l'aide d'un spectromètre de masse du type MSKH-4, d'un Dérivatograph du type Paulik-Paulik-Erdey et d'un diffractomètre des rayons X du type DRON-0,5.Aux faibles vitesses de chauffage (0 à 0.2°/s) l'oxygène se dégage en quatre étapes: PbO₂ PbO_1.56 PbO_1.44 PbO. Aux vitesses de chauffage très élevées (2 · 10² à 2.5 · 10³°/s) le nombre des étapes se réduit à deux: PbO₂ PbO_1.4 PbO. On essaye de relier le changement observé dans le mécanisme de décomposition de PbO₂à la structure cristalline des oxydes de plomb.

---

PbO₂ 2.5 · 10³°/c. — — MCX — 4, — — — 0.5. (0–0.2°/c) : PbO₂ PbO_1.56. PbO_1.44 PbO. (2 · 10²–2.5 · 10³°/c) : PbO₂ PbO_1.4 PbO. PbO₂ .

     

Error analysis of surface area determinations by the chromatographic technique

The systematic and random errors in the determination of the surface area of adsorbents and catalysts by argon thermodesorption chromatography are analyzed.

---

.

     

Effect of acio properties of the alumina surface on the formation of chlorides during its interaction with CCl4

IR spectroscopy was employed to study acid properties of a series of alumina samples different in the phase composition and in the porous structure. The comparison of the surface acidity with the data on the quantitative formation of Cl^– during the interaction of CCl₄ with alumina indicates that the extent of chlorination of the samples tends to increase with increasing the surface acidity.

---

- , . Cl^– CCl₄ , .

     

Free-radical addition reactions initiated by metal oxides, VI

CuO catalyzed additions of ethyl cyanoacetate, initiated thermally and by di-tert-butyl peroxide, to 1-decene and ethyl 10-undecylenoate were investigated. The CuO catalyzed reaction proceeds already at 80°C at a high rate, produces 11 adducts in high yields and represents the first example of catalysis in radical addition reactions of non-halogenated compounds.

---

1- 10-, CuO, -.-. , CuO, 80°C, 11 . .

     

Enthalpy of Solution of Squalane in Alcohols

Enthalpy of solution at 25°C of squalane in butyl alcohols and 1-octanol is determined calorimetrically. The endothermic effect of dissolution increases in the order 1-OctOH < BuOH < i-BuOH < t-BuOH. A linear correlation is found between the enthalpies of solution of squalane and hexadecane, from which the enthalpy of solution of squalane in methanol is determined. The contributions of the cavity formation and solute-solvent interaction to the enthalpy of solution are estimated by multiple regression analysis. The enthalpy of cavity formation is only slightly dependent on the length of the main chain of an alcohol and also on the branching type, varying in the order 1-OctOH BuOH i-BuOH < MeOH s-BuOH < t-BuOH. Interaction of squalane with alcocols increases in the order MeOH < t-BuOH < BuOH < i-BuOH s-BuOH < 1-OctOH.     

Kinetics of ammonia decomposition of polycrystalline rhodium at pressures between 0.013 and 103 kPa

The rates of ammonia decomposition on polycrystalline Rh wires between 600 and 1800 K and at pressures between 13.3 Pa and 103 kPa were measured and fitted with a Langmuir-Hinshelwood unimolecular reaction rate expression. At high temperatures and pressures the reaction seems to be mass transfer controlled.

---

Rh 600–1800 K 13,3 –103 . , -. .

     

Electrochemical Behavior of Epinephrine at a Penicillamine Self-Assembled Gold Electrode,and its Analytical Application

The fabrication and electrochemical characteristics of a penicillamine (PCA) self-assembled monolayer modified gold electrode were investigated. The self-assembled electrode shows obvious electrocatalytic activity for the oxidation of epinephrine (EP). In phosphate buffer (pH 7.73), a sensitive oxidation peak was observed at 0.190V with the PCA modified Au electrode. The peak current is proportional to the concentration of EP in the range of 2.0×10^–56.0×10^–4molL^–1 and 5.0×10^–6 2.0×10^–4molL^–1 for cyclic voltammetry (CV) and differential pulse voltammetry (DPV) with the detection limits of 1.8×10^–7 and 1.3×10^–7molL^–1, respectively. The possible reaction mechanism is also discussed. The PCA self-assembled monolayer modified gold electrode is highly stable and can be applied to the determination of EP in practical injection samples. Application is simple, rapid and produces accurate results.     

Comparison of the acid strength of solid catalysts

The catalytic activity of some solid acidic catalysts was tested in the depolymerization of paraldehyde. It was found that the activities of sulfonated ion exchange resin and mounted phosphotungstic acid strongly exceed the activity of silica-alumina and other oxide catalysts. By means of Brönsted relationship, the differences in H_O of the surfaces were estimated.

---

. , - - . H_O .

     

Über einige Komplexboride von Übergangsmetallen

Zusammenfassung Dreistofflegierungen in dem Kombinationen {Mo, W}-{Fe, Co, Ni}-B; {V, Nb, Ta, Mo, W}-B-Al werden vornehmlich auf die Existenz von Komplexboriden hin untersucht. Die isotypen Phasen Mo₂CoB₂, Mo₂NiB₂, W₂FeB₂, W₂CoB₂ und W₂NiB₂ sind strukturell mit Mo₂FeB₂ verwandt, aber doch von dieser Phase verschieden. Gefunden werden außerdem die isotypen Phasen MoCoB und WCoB. Das Problem der -Phase wird diskutiert. In manchen Fällen tritt ein Zwischenzustand auf, der vermutlich durch Stapelfehler einer Unterzelle (c/3 in hexagonaler Aufstellung) hervorgerufen wird. Neben dem Auftreten ternärer Phasen bei Nb-B-Al und Ta-B-Al wird eine ausgeprägte Mischphasenbildung: (Nb, Al)B₂ und (Ta, Al)B₂ beobachtet. Der Dreistoff: Mo-B-Al ist durch die ternäre Phase MoBAl gekennzeichmet, ferner tritt der durch Al stabilisierte CrB-Typ auf (Mo_0,45B_0,50Al_0,05). Die Gleichgewichtsverhältnisse in denT-B-Al-Dreistoffen werden abgeschätzt.

---

Alloys of the combinations {Mo, W}-{Fe, Co, Ni}-B, {V, Nb, Ta, Mo, W}-B-Al have been examined with respect to the existence of complex borides. The phases of the approximate formula Mo₂CoB₂, Mo₂NiB₂, W₂FeB₂, W₂CoB₂ and W₂NiB₂ have been found to be isotypic. They do however not correspond to Mo₂FeB₂ having U₃Si₂ structure. Two other complex borides of formula MoCoB and WCoB have been detected having the same crystal structure. The problem of the -phases which partially contain boron will be discussed considering the supposedly occurring stacking faults of a subcell unit (c=c/3 for hexagonal symmetry). Besides formation of ternary compounds for: Nb-B-Al and Ta-B-Al an extended solid solution (Nb, Al)B₂ and (Ta, Al)B₂ has been observed. The Mo-B-Al-system is characterized by the ternary phase of formula MoBAl. Mo-monoboride having CrB-type has been found to be stabilized by a small amount of Al, thus Mo_0,45B_0,50Al_0,05 being formed. The phase equilibria within the ternary systems have been established for the major part.

---

---

Mit 4 Abbildungen     

Comportement thermique des propionates hydrates de calcium,strontium et baryum

Résumé Les propionates monohydratés de calcium, strontium et baryum ont été étudiés par radiocristallographie (sur monocristal et sur poudre) et par TG et ATD (à l'air et en milieu inerte). Ils cristallisent dans les systèmes monoclinique (Ca) ou orthorhombique (Sr, Ba). Ils perdent leur eau en une fois (Ca, Sr) ou deux fois (Ba) avec formation d'un hémihydrate intermédiaire. Tous les sels anhydres, d'abord amorphes aux rayons X, cristallisent vers 200°. Le propionate de baryum anhydre cristallisé subit une transformation polymorphique à 240°. Après 300° à l'air et 350° sous atmosphère inerte, la fusion et la décomposition se produisent simultanément: il y a dégagement de diéthylcétone et le résidu solide est du carbonate métallique bien cristallisé.

---

The monohydrates of calcium, strontium and barium propionates have been investigated by radiocrystallography (using monocrystals and the powder method) and by TG and DTA (in air and in an inert atmosphere). These compounds crystallize in the monoclinic system (Ca) or the orthorhombic system (Sr, Ba). Dehydration occurs in a single stage for calcium and strontium propionates and in two stages for barium propionate. The compound Ba(C₂H₅CO₂) 0.5 H₂O is well-defined. All the anhydrous salts, first amorphous to X-rays, crystallize at about 200°. Barium propionate undergoes another phase transition at 240°. Melting and simultaneous decomposition take place after 300° in air and after 350° in an inert atmosphere, leading to evolution of diethylketone and to a solid residue of well-crystallized metal carbonate.

---

Zusammenfassung Die Propionatmonohydrate von Calcium, Strontium und Barium wurden mittels Radiokristallographie (an Einkristallen und an Pulver), sowie mittels TG und DTA (in Luft und in inertem Medium) untersucht. Sie kristallisieren in monoklinen (Ca) oder orthorhombischen (Sr, Ba) Systemen. Sie verlieren ihr Kristallwasser auf einmal (Ca, Sr) oder zweimal (Ba) unter Bildung eines intermediären Hemihydrats. Sämtliche Anhydrosalze, welche sich zuerst bei Röntgenbestrahlung amorph verhalten, kristallisieren in der Nähe von 200°. Das kristalline wasserfreie Bariumpropionat erfährt eine polymorphe Änderung bei 240°. Nach 300° in Luft und 350° in inerter Atmosphäre treten Schmelzen und Zersetzung gleichzeitig auf: Diäthylaceton wird freigesetzt und der feste Rückstand besteht aus kristallinem Metallcarbonat.

---

, , , . - () — Sr, Ba. , — . (₂₅)₂. 0,5₂. 200°. 240° . 300° 350° , .

     

Oxidation stability of crosslinked polyethylene. Isothermal DTA method

Isothermal differential thermal analysis has been used to study the thermooxidative stability of two grades of crosslinked polyethylene in the temperature range from 120°C to 230°C. Induction times of thermooxidative degradation were measured from 2 minutes up to 3590 hours. Oxidation Induction time and mechanical failure in oven ageing experiments coincided over the measured temperature range. The degree of crosslinking was not strongly affected by the oxidative reaction. The Arrhenius-plots of DTA results showed curvature at 150°C, so straight line extrapolations from short-term experiments at elevated temperatures to low temperatures and long times are not possible. Thermoanalytically measured residual thermooxidative stability decreased linearly with ageing time and showed great scattering of the results.

---

Zusammenfassung Die isotherme Differentialthermoanalyse ist als Methode zur Abschätzung der thermooxidativen Beständigkeit von Polyolefinen seit längerem bekannt. In der vorliegenden Arbeit wird über isotherme DTA-Messungen an Proben aus vernetztem Polyäthylen im Temperaturbereich von 230°C bis 120°C berichtet, wobei Oxidationsinduktionszeiten bis zu 3590 Stunden gemessen wurden. Die Auftragung der Oxidationsinduktionszeiten in Arrhenius-Diagrammen zeigte für vernetztes Polyäthylen keine für Extrapolationszwecke geeignete Linearität des Logarithmus der Oxidationsinduktionszeiten über der reziproken absoluten Temperatur über weitere Bereiche der Meßzeiten bzw. Prüftemperaturen. Die thermoanalytisch bestimmten Oxidationsinduktionszeiten stimmten mit dem Steilabfall der Reißdehnung in Ofenalterungsversuchen überein während der über den Gelgehalt ermittelte Vernetzungsgrad vom thermooxidativen Abbau nicht signifikant beeinflußt wurde. Somit können aufwendige Ofenalterungsversuche durch experimentell einfache isotherme DTA-Versuche ersetzt werden. Die Messung der thermooxidativen Restbeständigkeit im isothermen DTA-Versuch bei erhöhter Prüftemperatur ermöglicht einen wesentlich deutlicheren Einblick in den thermooxidativen Schädigungszustand eines Polyolefins während der Induktionsperiode des thermooxidativen Abbaus als die Messungen des Vernetzungsgrades oder der Reißdehnung. Die Abnahme der thermooxidativen Restbeständigkeit erfolgt im Fall des vernetzten Polyäthylen in allen Fällen linear über der Alterungszeit.

---

120–230°. 2 3590 . . . 150°, . .