Modulated molecular recognition by a temperature‐sensitive molecularly‐imprinted polymer

Modulated molecular recognition was achieved in a temperature‐sensitive molecularly‐imprinted polymer. Using PNIPA as the temperature‐sensitive element, the adenine‐imprinted polymer (i.e., MIP‐S) was prepared and characterized. The MIP‐S exhibited a temperature‐responsive molecular recognition behavior because of the thermal phase‐transition within the MIP‐S network. Specifically, below the transition temperature (e.g., 20 °C), the MIP‐S showed a highly specific recognition for the imprint species (adenine). However, the MIP‐S did not show any significant resolution for the imprint species (adenine) and its analogue (1‐methyladenine) above the transition temperature (e.g., 40 °C). Such temperature‐regulated recognition is comparable to a switch‐on and switch‐off process, thereby making tunable molecular recognition feasible. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2352–2360, 2009     

Preparation of a molecularly imprinted polymer for the solid-phase extraction of scopolamine with hyoscyamine as a dummy template molecule

Molecularly imprinted polymers (MIPs) selective for scopolamine were produced using hyoscyamine (a close structural analogue) as template molecule. The produced polymers were used as media for solid-phase extraction, exhibiting selective binding properties for the analyte from biological samples. Human and calf urine and serum were processed on the MIP under various extraction protocols. The best performance was observed after loading the analyte in aqueous environment facilitating retention on the MIP by non-selective hydrophobic interactions. The MIPs were subsequently washed using an optimised solvent system to enable selective desorption of the analyte. Other related and non-related compounds were accessed to evaluate molecular recognition properties. Recoveries of up to 79% were achieved for the analyte of interest from biological samples.     

HPLC imprinted-stationary phase prepared by precipitation polymerisation for the determination of thiabendazole in fruit

A molecularly imprinted polymer (MIP) tailored for the HPLC determination of the fungicide thiabendazole (TBZ) has been synthesised in one single preparative step by precipitation polymerisation in an acetonitrile/toluene co-solvent, using TBZ as template molecule, methacrylic acid as functional monomer and divinylbenzene-80 as crosslinker. The imprinted polymer particulates obtained were characterised by scanning electron microscopy and nitrogen sorption porosimetry. These analyses showed clearly that spherical polymer particulates (polymer microspheres) with narrow size distributions (average particle diameter approximately 3.5 microm) and well-developed pore structures had been produced. The imprinted microspheres were packed into a stainless steel HPLC column (50 x 4.6 mm id) and evaluated as an imprinted stationary phase. The imprinting effect was demonstrated clearly, i.e., the column was observed to bind TBZ selectively, and the effect of different chromatographic parameters (e.g., temperature, flow-rate and elution solvents) on TBZ retention/elution studied. Under optimised conditions, the TBZ-imprinted column was used for the HPLC-fluorescence (HPLC-F) determination of TBZ directly from orange (both whole fruit and juice), lemon, grape and strawberry extracts at low concentration levels in less than 15 min, without any need for a clean-up step in the analytical protocol.     

腈菌唑分子印迹聚合物的制备及识别性能研究

以腈菌唑为模板分子,采用原位分子印迹技术,制备具有特定识别性能的连续棒状分子印迹聚合物。考察了流动相中酸量对分离的影响,研究了几种结构类似物在所得分子印迹柱上的保留特性。结果表明,这种棒状分子印迹聚合物比相应的空白聚合物有高的识别性能和选择性。     

三元交联剂分子烙印手性固定相

采用２－乙烯基吡啶＋丙烯酰胺复合功能单体,以三甲氧基丙烷三甲基丙烯酸酯为三元交联剂制备了苯甲氧羰基－Ｌ－色氨酸烙印手性固定相,并与二元交联剂烙印相同氨基酸衍生物的情况进行了对比,发现三元交联剂在较小的用量下就可使分子烙印聚合物达到足够的交联度,实现烙印分子对映体的基线分离。     

Mechanism of molecular recognition on molecular imprinted monolith by capillary electrochromatography

The recognition mechanism of molecularly imprinted polymer (MIP) in capillary electrochromatography (CEC) is complicated since it possesses a hybrid process, which comprises the features of chromatographic retention, electrophoretic migration and molecular imprinting. For an understanding of the molecular recognition of MIP in CEC, a monolithic MIP in a capillary with 1,1'-binaphthyl-2,2'-diamine (BNA) imprinting was prepared by in situ copolymerization of imprinted molecule, methacrylic acid and ethylene glycol dimethacrylate in porogenic solvent, a mixture of toluene-isooctane. Strong recognition ability and high column performance (theory plates was 43,000 plates/m) of BNA were achieved on this monolithic MIP in CEC mode. In addition, BNA and its structural analogue, 1,1'-bi-2, 2'-naphthol, differing in functional groups, were used as model compounds to study imprinting effect on the resultant BNA-imprinted monolithic column, a reference column without imprinting of BNA and a open capillary. The effects of organic modifier concentration, pH value of buffer, salt concentration of buffer and column temperature on the retention and recognition of two compounds were investigated. The results showed that the molecular recognition on MIP monolith in CEC mode mainly derived from imprinting cavities on BNA-imprinted polymer other than chromatographic retention and electrophoretic migration.     

以局部结构类似物为类模板的分子印迹整体柱在线检测三甲氧苄啶

以三聚氰胺(MAM)为类模板分子,甲基丙烯酸(MAA)为功能单体,二甲基丙烯酸乙二醇酯(EDMA)为交联剂,聚己二醇(PEG400)为致孔剂,原位聚合法制备了对三甲氧苄啶(TMP)有较强选择性吸附作用的分子印迹(MIP)整体柱.以该MIP整体柱为高效液相色谱柱,考察了其在不同色谱流动相组成条件下对TMP的识别性能.结果显示,MIP整体柱在甲醇、乙腈、水等条件下能够吸附TMP而不出峰.可以利用MIP整体.柱在甲醇-水( 80:20,V/V)中在线选择性吸附(或富集)TMP,然后将流动相转换为甲醇进一步除去疏水性杂质,最后用强洗脱剂洗脱TMP出峰.MIP整体柱线检测人血清中TMP的工作曲线为A=42.8c 3.03(r=0.9994);线性范围为8.3～93.8 mg/L;检出限为0.14 mg/L.     

Molecularly imprinted polymers for bisphenol A for HPLC and SPE from water and milk

Molecularly imprinted polymers (MIPs) for bisphenol A (BPA) were prepared by two synthetic routes: semi-covalent and noncovalent methodology. The molecular imprinting effect was evaluated using the polymers in HPLC and SPE. Polymers prepared with noncovalent mode were proven more effective. These polymers were applied in SPE facilitating selective retention of BPA from bottled water and milk. The developed sample preparation was simple and efficient comprising only dilution of milk and MISPE prior to LC-MS analysis. Overall MISPE enhanced sample clean-up. Compared with control nonimprinted polymers and conventional C18 SPE cartridges, the MIPs exhibited selective analyte recognition. The method provided quantitative BPA recoveries, very good reproducibility (% RSDs lower than 7%), and low LOD (0.2 ng/g). MIP interacts similarly with deuterated BPA allowing its use as internal standard in LC-MS. The most critical parameters of MISPE were the organic content in loading-washing medium and the washing volume. Low flow rates in the elution step enhanced extraction recovery. Important advantages of the MIP were: the high breakthrough volumes (> 500 mL of water), high mass capacity (> 10 ng/mg of MIP sorbent), good linearity, and good stability in performance for over 35 cycles of use.     

Thermoresponsive ketoprofen-imprinted monolith prepared in ionic liquid

A thermoresponsive imprinted monolith with the ability of molecular recognition for ketoprofen was prepared for the first time. The smart monolith was synthesized in a stainless steel column using acrylamide (AAm) and 2-acrylamide-2-methyl propanesulfonic acid (AMPS) as functional monomers, which can form interpolymer complexation to restrict access of the analyte to the imprinted networks at low temperatures. To avoid a high back pressure of the column derived from neat dimethyl sulfoxide (DMSO) as a porogenic solvent that is needed to solve polar AMPS, an ionic liquid, [BMIM]BF₄, was introduced into the pre-polymerization mixture. The molecular recognition ability towards ketoprofen of the resulting thermoresponsive molecularly imprinted polymer (MIP) monolith displayed significant dependence on temperature compared with a non-imprinted column (NIP), and the greatest imprinting factor was achieved at the transition temperature of 35 °C (above 10). Furthermore, the number of binding sites of the smart MIP monolith at 35 °C was about 76 times as large as that at 25 °C. In addition, Freundlich analyses indicated that the thermoresponsive MIP monolith had homogeneous affinity sites at both 25 and 35 °C with heterogeneity index 0.9251 and 0.9851, respectively.     

Synthesis of caffeic acid molecularly imprinted polymer microspheres and high-performance liquid chromatography evaluation of their sorption properties

In the current work, a molecularly imprinted polymer (MIP) has been synthesised and used to enable the extraction of a naturally-occurring antioxidant from complex media. More specifically, we describe the first example of a caffeic acid (CA) MIP which has been synthesised in the form of well-defined polymer microspheres, and its use for the extraction of CA from fruit juice sample. The CA MIP was synthesised by precipitation polymerisation using 4-vinylpyridine as functional monomer, divinylbenzene-80 as crosslinker and acetonitrile:toluene (75/25, v/v) as porogen. The particle sizing and morphological characterisation of the polymers was carried out by means of scanning electron microscopy (narrow particle size distribution; ～5 and 1.5 μm particle diameters for the MIP and NIP [non-imprinted polymer], respectively) and nitrogen sorption porosimetry (specific surface areas of 340 and 350 m(2)g(-1), and specific pore volumes of 0.17 and 0.19 cm(3)g(-1) for the MIP and NIP, respectively). The polymers were evaluated further by batch rebinding experiments, and from the derived isotherms their binding capacity and binding strength were determined (number of binding sites (N(K))=0.6 and 0.3 mmol g(-1) for the MIP and NIP, respectively, and apparent average adsorption constant (K(N))=10.0 and 1.6L mmol(-1) for the MIP and NIP, respectively). To evaluate the molecular recognition character of the MIP it was packed into a stainless steel column (50 mm × 4.6 mm i.d.) and evaluated as an HPLC-stationary phase. The mobile phase composition, flow rate, and the elution profile were then optimised in order to improve the peak shape without negatively affecting the imprinting factor (IF). Very interesting, promising properties were revealed. The imprinting factor (IF) under the optimised conditions was 11.9. Finally, when the imprinted LC column was used for the selective recognition of CA over eight related compounds, very good selectivity was obtained. This outcome enabled the direct extraction of CA in commercial apple juice samples with recoveries in excess of 81% and, rather significantly, without any need for a clean-up step prior to the extraction.     

Preparation and evaluation of molecularly imprinted polymers based on 9-ethyladenine for the recognition of nucleotide bases in capillary electrochromatography

A molecularly imprinted polymer (MIP) comprising 9-ethyladenine was polymerized in situ inside the capillary for the electrochromatographic separation of nucleotide bases. The capillary wall was first functionalized with 3-trimethoxysilylpropyl methacrylate (10% v/v) and 1,1-diphenyl-2-picrylhydrazyl (0.01% w/v) in toluene. Following this treatment, the capillary was filled with acetonitrile containing 9-ethyladenine, methacrylic acid, ethylene glycol dimethacrylate, and initiator. After polymerization, the MIP was shrunk into a film against the inner wall of the capillary with the syringe pump. The template was then removed with methanol under nitrogen flow. For evaluation the feasibility of the MIP column for the separation of nucleotide bases, some parameters including the pH, concentration of the background electrolyte, the applied voltage as well as the effect of organic modifier were studied. The migration behavior of nucleotide bases on the MIP column was also compared with that on the bare fused-silica column. The results indicated that the MIP columns demonstrated better recognition properties at a pH range of 6-8. The efficiency (plates/m) at pH 8 for the nonimprinted analyte was 75,300 for cytosine, 50,200 for thymine, and 14,800 for guanine. However, the efficiency for the imprinted analyte, adenine, was quite low. This was evidenced by the broad peak, yielding only 2600 plates/m.     

Preparation and evaluation of a macroporous molecularly imprinted hybrid silica monolithic column for recognition of proteins by high performance liquid chromatography

A novel type of macroporous molecularly imprinted hybrid silica monolithic column was first developed for recognition of proteins. The macroporous silica-based monolithic skeleton was synthesized in a 4.6 mm i.d. stainless steel column by a mild sol–gel process with methyltrimethoxysilane (MTMS) as a sole precursor, and then vinyl groups were introduced onto the surface of the silica skeleton by chemical modification of γ-methacryloxypropyltrimethoxysilane (γ-MAPS). Subsequently, the molecularly imprinted polymer (MIP) coating was copolymerized and anchored onto the surface of the silica monolith. Bovine serum albumin (BSA) and lysozyme (Lyz), which differ greatly in molecular size, isoelectric point, and charge, were representatively selected for imprinted templates to evaluate recognition property of the hybrid silica-based MIP monolith. Some important factors, such as template–monomer molar ratio, total monomer concentration and crosslinking density, were systematically investigated. Under the optimum conditions, the obtained hybrid silica-based MIP monolith showed higher binding affinity for template than its corresponding non-imprinted (NIP) monolith. The imprinted factor (IF) for BSA and Lyz reached 9.07 and 6.52, respectively. Moreover, the hybrid silica-based MIP monolith displayed favorable binding characteristics for template over competitive protein. Compared with the imprinted silica beads for stationary phase and in situ organic polymer-based hydrogel MIP monolith, the hybrid silica MIP monolith exhibited higher recognition, stability and lifetime.     

Molecularly imprinted polymers—potential and challenges in analytical chemistry

Among the variety of biomimetic recognition schemes utilizing supramolecular approaches molecularly imprinted polymers (MIPs) have proven their potential as synthetic receptors in numerous applications ranging from liquid chromatography to assays and sensor technology. Their inherent advantages compared to biochemical/biological recognition systems include robustness, storage endurance and lower costs. However, until recently only few contributions throughout the relevant literature describe quantitative analytical applications of MIPs for practically relevant analyte molecules and real-world samples. Increased motivation to thoroughly evaluate the true potential of MIP technology is clearly attributed to the demands of modern analytical chemistry, which include enhanced sensitivity, selectivity and applicability of molecular recognition building blocks at decreasing costs. In particular, the areas of environmental monitoring, food and beverage analysis and industrial process surveillance require analytical tools capable of discriminating chemicals with high molecular specificity considering increasing numbers of complex environmental contaminants, pollution of raw products and rigorous quality control requested by legislation and consumer protection. Furthermore, efficient product improvement and development of new products requires precise qualitative and quantitative analytical methods. Finally, environmental, food and process safety control issues favor the application of on-line in situ analytical methods with high molecular selectivity. While biorecognition schemes frequently suffer from degrading bioactivity and long-term stability when applied in real-world sample environments, MIPs serving as synthetic antibodies have successfully been applied as stationary phase separation matrix (e.g. HPLC and SPE), recognition component in bioassays (e.g. ELISA) or biomimetic recognition layer in chemical sensor systems. Examples such as MIP-based selective analysis of flavones/flavonoids in wine, the determination of mycotoxins in beverages and analysis of organic contaminants in environment samples will elucidate the perspectives of this technology and will be contrasted with the challenges of rational MIP design providing control on binding site density, receptor capacity and selectivity.     

球形分子烙印聚合物分离立体异构体

用悬浮聚合的方法制备了粒径为50～70μm的均匀球形的分子烙印聚合物,对立体异构体辛可宁和辛可尼丁获得了较好的分离效果（α=2．89,Rs=0．76）。通过对物理性质的研究发现：球形的分子烙印聚合物呈均匀完美的球形,并具有良好的热稳定性。     

Surface-initiated molecularly imprinted polymeric column: In situ synthesis and application for semi-preparative separation by high performance liquid chromatography

In this work, we prepared a monolithic and surface initiated molecularly imprinted polymeric (MIP) column for HPLC and explored its application for template separation from plant extract. The silica beads (40-60 μm) were coupled with initiator on the surface and then packed in to a stainless steel HPLC column. The pre-polymerization mixture (the template, functional monomer and crosslinker were emodin, acrylamide and divinylbenzene, respectively) was injected into the column and polymerized by thermal initiation. The prepared MIP column exhibited excellent retention capability and large imprinted factor for template (the retention time and imprinted factor for emodin on MIP column were 16.26 min and 7.21, respectively). Moreover, the emodin-molecularly imprinted polymeric column could be applied to separate emodin from alcohol extract of Rheum palmatum L. at semi-preparative scale and 1.2 mg of emodin was obtained in 4 h.     

Creatinine imprinted poly(hydroxyethyl methacrylate) based cryogel cartridges

Creatinine imprinted cryogel (MIP) cartridge was prepared with functional monomer N-methacryloyl-(L)-histidinemethylester (MAH) under frozen conditions. Creatinine adsorption studies and selectivity of MIP cryogel were evaluated in aqueous solution and artificial urine sample. Maximum adsorbed amount of creatinine was calculated as 6.83 mg/g polymer for MIP cryogel. Langmuir and Freundlich adsorption isotherm models were used to investigate the adsorption behaviour of creatinine. In the artificial urine sample; recovery amounts of creatinine were found 34.7–46.2%. Creatinine imprinted cryogel (MIP) cartridge recognized creatinine, 4.58 and 4.37 times greater competitive molecules. MIP cryogel catridge was repeatedly used many times for adsorption desorption cycles.     

Semi-Preparative Scale Separation of Emodin from Plant Extract by Using Molecularly Imprinted Polymer as Stationary Phase

In this work, a core–shell molecularly imprinted polymer (MIP) was synthesized through sol–gel coating procedure by using silica beads, emodin, 3-aminopropyltriethoxysilane, tetraethoxysilane and tetrahydrofuran as supporting matrix, template, functional monomer, cross-linker and solvent, respectively. The selective recognition property for emodin and its analogues (physcion and aloe emodin) of the resultant MIP was evaluated in a chromatographic column for high-performance liquid chromatography (HPLC). The retention time and imprinted factor of MIP column for emodin, physcion and aloe emodin were 5.11, 0.63, 0.69 min and 4.69, 0.75, 1.38, respectively. It showed that the MIP beads had a good binding ability for emodin. Finally, one-step separation of emodin from alcohol extract of Rheum palmatum L. at semi-preparative scale was achieved and 380 mg of emodin was collected in 5 days. The product was characterized by mass spectrometry and HPLC and its purity was 95 %.     

分子烙印聚合物为固定相分离和识别磺胺类药物

以磺胺甲噁唑为模板分子,采用原位聚合法制备了具有特定识别性能的棒状分子烙印聚合物。作为高效液相色谱的固定相实现了磺胺甲噁唑与其结构类似物的分离。磺胺甲噁唑烙印聚合物和目标分子之间的相互作用除了特异性的氢键作用外,也存在着疏水作用。同时考察含水量、流速对分离的影响,论证了分子烙印聚合物选择性专一的作用原理。结果表明,这种棒状聚合物对模板分子及其类似物有很好的分离能力。     

Developing imprinted polymer nanoparticles for the selective separation of antidiabetic drugs

In this study, new molecularly imprinted polymer (MIP) nanoparticles are designed for selective recognition of different drugs used for the treatment of type 2 diabetes mellitus, i.e. sitagliptin (SG) and metformin (MF). The SG‐ and MF‐imprinted polymer nanoparticles are synthesized by free‐radical initiated polymerization of the functional monomers: methacrylic acid and methyl methacrylate; and the crosslinker: ethylene glycol dimethacrylate. The surface morphology of resultant MIP nanoparticles is studied by atomic force microscopy. Fourier transform infrared spectra of MIP nanoparticles suggest the presence of reversible, non‐covalent interactions between the template and the polymer. The effect of pH on the rebinding of antidiabetic drugs with SG‐ and MF‐imprinted polymers is investigated to determine the optimal experimental conditions. The molecular recognition characteristics of SG‐ and MF‐imprinted polymers for the respective drug targets are determined at low concentrations of SG (50–150 ppm) and MF (5–100 ppm). In both cases, the MIP nanoparticles exhibit higher binding response compared to non‐imprinted polymers. Furthermore, the MIPs demonstrate high selectivity with four fold higher responses toward imprinted drugs targets, respectively. Recycled MIP nanoparticles retain 90% of their drug‐binding efficiency, which makes them suitable for successive analyses with significantly preserved recognition features.     

Molecularly imprinted polymers as a tool for separation in CEC

Molecularly imprinted polymers (MIPs) are synthesized in the presence of a template which results in the formation of specific recognition cavities complementary to the template in shape and chemical functionality. One of the most successful application areas of MIPs is chromatographic sorbents, which are tailor-made synthetic polymers for a given analyte. However, low efficiency of MIP columns is often observed because of slow kinetics of the template. CEC-based MIPs are thought to improve efficiency of MIP-based separation due to the enhanced flow dynamics of CEC. Another attractive feature is the miniaturized format of CEC, so that fewer templates or monomers for the molecular imprinting are consumed, a characteristic desired for 'green chemistry'. The small dimensions of a capillary demand the development of novel polymer formats that can be applied to a miniaturized system. This review discusses the various formats, i.e., the micro- or nanoparticle, the coating and the monolith, for application in CEC as well as the use in MIP syntheses and characteristics.