One pot direct synthesis of β-ketoesters via carbonylation of aryl halides using cobalt carbonyl

A direct method for the synthesis of β-ketoesters from aryl halides (iodide, bromide) has been described by using cobalt carbonyl as carbon monoxide source in microwave irradiation. Using this protocol, a wide variety of substituted aryl halides has been successfully converted to corresponding β-ketoesters.     

Palladium‐Catalyzed Chlorocarbonylation of Aryl (Pseudo)Halides Through In Situ Generation of Carbon Monoxide

An efficient palladium‐catalyzed chlorocarbonylation of aryl (pseudo)halides that gives access to a wide range of carboxylic acid derivatives has been developed. The use of butyryl chloride as a combined CO and Cl source eludes the need for toxic, gaseous carbon monoxide, thus facilitating the synthesis of high‐value products from readily available aryl (pseudo)halides. The combination of palladium(0), Xantphos, and an amine base is essential to promote this broadly applicable catalytic reaction. Overall, this reaction provides access to a great variety of carbonyl‐containing products through in situ transformation of the generated aroyl chloride. Combined experimental and computational studies support a reaction mechanism involving in situ generation of CO.     

Four‐Component Borocarbonylation of Vinylarenes Enabled by Cooperative Cu/Pd Catalysis: Access to β‐Boryl Ketones and β‐Boryl Vinyl Esters

We report here a general four‐component synthetic procedure for the preparation of β‐boryl ketones and β‐boryl vinyl esters. Joint catalyzed by palladium and copper catalysts, borocarbonylative reaction between vinylarenes, aryl halides/triflates, B₂Pin₂, and carbon monoxide proceed successfully. A variety of synthetically useful β‐boryl ketones were synthesized in good to high yields by using aryl iodides as the substrates. It is noteworthy that when aryl triflates were applied as the starting materials, β‐boryl vinyl esters were synthesized in a similar manner and with broad functional group tolerance. A rational mechanism for this reaction was also proposed.     

Palladium-catalyzed esterification of aryl halides using aryl formates without the use of external carbon monoxide

Aryl formates are efficient carbon monoxide sources in palladium-catalyzed esterification of aryl halides. The carbonylation readily proceeds at ambient pressure without the use of external carbon monoxide to afford the corresponding esters in high yields.     

Microwave-assisted palladium-catalysed carbonylations of aryl and heteroaryl halides with sulfamide nucleophiles utilising a solid CO source

Mo(CO)₆ acts as a source of carbon monoxide for the palladium-catalysed, microwave-assisted, carbonylative coupling of aryl or heteroaryl halides with sulfamide nucleophiles to yield aryl and heteroaryl acyl sulfamides.     

Mo(CO)(6)-mediated carbamoylation of aryl halides

A simple method for the synthesis of amides has been developed by molybdenum-mediated carbamoylation of aryl halides. Whereas the conventional palladium-catalyzed three-component coupling reaction requires a large excess of gaseous carbon monoxide, the incorporation of carbon monoxide in this Mo-mediated carbamoylation reaction is so efficient that it requires only a slight excess amount of carbon monoxide in the form of its molybdenum complex, Mo(CO)(6). The reaction is applicable for the synthesis of a wide variety of not only secondary and tertiary amides but also primary amides by using aqueous ammonia.     

Carbonylation reaction of aryl halides on a polymer support using in situ-generated carbon monoxide without the assistance of microwaves

Palladium-catalyzed carbonylation, which was based on a ligand exchange reaction, efficiently converted immobilized aryl halides to amides under mild reaction conditions using molybdenum hexacarbonyl [Mo(CO)(6)] as the carbon monoxide source. The method easily operates without irradiating with microwaves and yields a wide range of highly pure amides after cleaving from the resin. The method could also be applied to the carbonylation of immobilized amines with aryl halides and to construct heterocyclic systems via a carbonylative cyclization.     

Transformations of Aryl Ketones via Ligand‐Promoted C−C Bond Activation

The coupling of aromatic electrophiles (aryl halides, aryl ethers, aryl acids, aryl nitriles etc.) with nucleophiles is a core methodology for the synthesis of aryl compounds. Transformations of aryl ketones in an analogous manner via carbon–carbon bond activation could greatly expand the toolbox for the synthesis of aryl compounds due to the abundance of aryl ketones. An exploratory study of this approach is typically based on carbon–carbon cleavage triggered by ring‐strain release and chelation assistance, and the products are also limited to a specific structural motif. Here we report a ligand‐promoted β‐carbon elimination strategy to activate the carbon–carbon bonds, which results in a range of transformations of aryl ketones, leading to useful aryl borates, and also to biaryls, aryl nitriles, and aryl alkenes. The use of a pyridine‐oxazoline ligand is crucial for this catalytic transformation. A gram‐scale borylation reaction of an aryl ketone via a simple one‐pot operation is reported. The potential utility of this strategy is also demonstrated by the late‐stage diversification of drug molecules probenecid, adapalene, and desoxyestrone, the fragrance tonalid as well as the natural product apocynin.     

Nickel‐ and Photoredox‐Catalyzed Cross‐Coupling Reactions of Aryl Halides with 4‐Alkyl‐1,4‐dihydropyridines as Formal Nucleophilic Alkylation Reagents

A combination of nickel and photoredox catalysts promoted novel cross‐coupling reactions of aryl halides with 4‐alkyl‐1,4‐dihydropyridines. 4‐Alkyl‐1,4‐dihydropyridines act as formal nucleophilic alkylation reagents through a photoredox‐catalyzed carbon–carbon (C?C) bond‐cleavage process. The present strategy provides an alternative to classical carbon‐centered nucleophiles, such as organometallic reagents.     

Four-Component Borocarbonylation of Vinylarenes Enabled by Cooperative Cu/Pd Catalysis: Access to β-Boryl Ketones and β-Boryl Vinyl Esters

We report here a general four-component synthetic procedure for the preparation of β-boryl ketones and β-boryl vinyl esters. Joint catalyzed by palladium and copper catalysts, borocarbonylative reaction between vinylarenes, aryl halides/triflates, B₂Pin₂, and carbon monoxide proceed successfully. A variety of synthetically useful β-boryl ketones were synthesized in good to high yields by using aryl iodides as the substrates. It is noteworthy that when aryl triflates were applied as the starting materials, β-boryl vinyl esters were synthesized in a similar manner and with broad functional group tolerance. A rational mechanism for this reaction was also proposed.     

Palladium-Catalyzed Chlorocarbonylation of Aryl (Pseudo)Halides Through In Situ Generation of Carbon Monoxide

An efficient palladium-catalyzed chlorocarbonylation of aryl (pseudo)halides that gives access to a wide range of carboxylic acid derivatives has been developed. The use of butyryl chloride as a combined CO and Cl source eludes the need for toxic, gaseous carbon monoxide, thus facilitating the synthesis of high-value products from readily available aryl (pseudo)halides. The combination of palladium(0), Xantphos, and an amine base is essential to promote this broadly applicable catalytic reaction. Overall, this reaction provides access to a great variety of carbonyl-containing products through in situ transformation of the generated aroyl chloride. Combined experimental and computational studies support a reaction mechanism involving in situ generation of CO.     

Direct Access to Aryl Bis(trifluoromethyl)carbinols from Aryl Bromides or Fluorosulfates: Palladium‐Catalyzed Carbonylation

A palladium‐catalyzed carbonylative approach for the direct conversion of (hetero)aryl bromides into their α,α‐bis(trifluoromethyl)carbinols is described, and it employs only stoichiometric amounts of carbon monoxide and trifluoromethyltrimethylsilane. In addition, aryl fluorosulfates proved highly compatible with these reaction conditions. The method is tolerant of a diverse set of functional groups, and it is adaptable to late‐stage carbon‐isotope labeling.     

Formal Direct Cross‐Coupling of Phenols with Amines

The transition‐metal‐catalyzed amination of aryl halides has been the most powerful method for the formation of aryl amines over the past decades. Phenols are regarded as ideal alternatives to aryl halides as coupling partners in cross‐couplings. An efficient palladium‐catalyzed formal cross‐coupling of phenols with various amines and anilines has now been developed. A variety of substituted phenols were compatible with the standard reaction conditions. Secondary and tertiary aryl amines could thus be synthesized in moderate to excellent yields.     

A convenient and practical heterogeneous palladium‐catalyzed carbonylative Suzuki coupling of aryl iodides with formic acid as carbon monoxide source

A practical heterogeneous palladium‐catalyzed carbonylative Suzuki coupling of aryl iodides with arylboronic acids under carbon monoxide gas‐free conditions has been developed using a bidentate phosphino‐functionalized magnetic nanoparticle‐immobilized palladium(II) complex as catalyst. Formic acid was utilized as the carbon monoxide source with dicyclohexylcarbodiimide as the activator, and a wide variety of biaryl ketones were generated in moderate to high yields. The new heterogeneous palladium catalyst can be prepared via a simple procedure and can easily be separated from a reaction mixture by simply applying an external magnet and recycled up to 10 times without any loss of activity.     

An Efficient Low‐Temperature Stille–Migita Cross‐Coupling Reaction for Heteroaromatic Compounds by Pd–PEPPSI–IPent

The reactivity of Pd–PEPPSI (Pyridine, Enhanced, Precatalyst, Preparation, Stabilization, and Initiation) precatalysts in the Stille–Migita cross‐coupling reaction between heteroaryl stannanes and aryl or heteroaryl halides was evaluated. In general, Pd–PEPPSI–IPent (IPent=diisopentylphenylimidazolium derivative) demonstrated high efficiency over a variety of challenging aryl or heteroaryl halides with thiophene‐, furan‐, pyrrole‐, and thiazole‐based organostannanes when compared with Pd–PEPPSI–IPr (IPr=diisopropylphenylimidazolium derivative). The transformations proceeded at appreciably lower temperatures (30–80 °C) than triarylphosphine‐based Pd catalysts, improving the scope of this useful carbon–carbon bond‐forming process.     

Palladium‐Catalyzed Direct Cross‐Coupling of Carboranyllithium with (Hetero)Aryl Halides

A palladium‐catalyzed direct C‐arylation reaction of readily available cage carboranyllithium reagents with aryl halides has been developed for the first time. This method is applicable to a wide range of aryl halide substrates including aryl iodides, aryl bromides, and heteroaromatic halides.     

Carbonylative cross-coupling reaction of ethynylstibane with aryl iodides

Palladium-catalyzed carbonylative cross-coupling reaction of ethynylstibane (PhSbPh(2)) and aryl iodides (Ar-I) is described. The reaction of the stibanes and the halides under 1 atm of carbon monoxide in N,N-dimethylacetamide using a combination of 5 mol% Pd(OAc)(2) and 4 equivalents (20 mol%) of PPh(3) brought about carbonylative cross-coupling reaction to afford arylethynylketones [ArC(O)Ph] in good yields along with a small amount of directly coupled products, aryl acetylens (ArPh). Formation of the side product was completely suppressed by conducting the reaction under high CO pressure (20 atm) conditions. The present method provides a variety of carbonylated products in good yield even with electron-deficient aryl iodides which usually give inferior results due to their tendency to undergo decarbonylation in the cross-coupling reaction of ethynylstibanes and acyl halides.     

Visible‐Light‐Promoted Nickel‐ and Organic‐Dye‐Cocatalyzed Formylation Reaction of Aryl Halides and Triflates and Vinyl Bromides with Diethoxyacetic Acid as a Formyl Equivalent

A simple formylation reaction of aryl halides, aryl triflates, and vinyl bromides under synergistic nickel‐ and organic‐dye‐mediated photoredox catalysis is reported. Distinct from widely used palladium‐catalyzed formylation processes, this reaction proceeds by a two‐step mechanistic sequence involving initial in situ generation of the diethoxymethyl radical from diethoxyacetic acid by a 4CzIPN‐mediated photoredox reaction. The formyl‐radical equivalent then undergoes nickel‐catalyzed substitution reactions with aryl halides and triflates and vinyl bromides to form the corresponding aldehyde products. Significantly, besides aryl bromides, less reactive aryl chlorides and triflates and vinyl halides serve as effective substrates for this process. Since the mild conditions involved in this reaction tolerate a plethora of functional groups, the process can be applied to the efficient preparation of diverse aromatic aldehydes.     

Efficient Copper(I)‐Catalyzed S‐Arylation of KSCN with Aryl Halides in PEG‐400

A simple and efficient protocol for CuI‐catalyzed C? S bond formation of aryl halides with KSCN to symmetrical diaryl sulfides was reported in PEG‐400 without any other additives. A variety of aryl halides were converted to the corresponding diaryl sulfides in good to excellent yields. The present procedure tolerated a variety of functional groups and the steric hindrance of ortho‐substituents on aryl halides did not affect the outcome.     

A novel and highly efficient polyaniline‐functionalized multiwall carbon nanotube‐supported cu(I) complex for Sonogashira coupling reactions of aryl halides with phenylacetylene

A polyaniline‐functionalized multiwall carbon nanotube‐supported Cu(I) complex was developed as an efficient catalyst for the Sonogashira reactions of aryl halides with phenylacetylene in the presence of potassium hydroxide in dimethylformamide at 135 °C under nitrogen atmosphere. The corresponding products were generated in good to excellent yields using this catalytic system. Moreover, the multiwall carbon nanotube‐supported Cu(I) catalyst was simply recycled and reused for six consecutive runs.