β‐LiMoO2(AsO4)

A new non‐centrosymmetrical form of lithium molybdyl arsenate has been synthesized and grown as a single crystal. The structure of β‐LiMoO₂(AsO₄) is built up of corner‐sharing AsO₄ tetrahedra and MoO₆ octahedra which form a three‐dimensional framework containing tunnels running along the a axis, wherein the Li⁺ cations are located. This novel structure is compared with the compound LiMoO₂(AsO₄) of the same formula, and with those of AMO₂(XO₄) (A is Na, K, Rb or Pb, M is Mo or V, and X is P or As) and B(MoO₂)₂(XO₄)₂ (B is Ba, Pb or Sr).     

A three‐dimensional coordination polymer based on the Zn4(μ3‐OH)2 unit: poly[[(μ4‐benzene‐1,4‐dicarboxylato)bis(μ3‐benzene‐1,4‐dicarboxylato)bis(μ3‐hydroxido)bis(1,10‐phenanthroline‐5,6‐dione)tetrazinc] dihydrate]

The title compound, {[Zn₄(C₈H₄O₄)₃(OH)₂(C₁₂H₆N₂O₂)₂]·2H₂O}_n, has been prepared hydrothermally by the reaction of Zn(NO₃)₂·6H₂O with benzene‐1,4‐dicarboxylic acid (H₂bdc) and 1,10‐phenanthroline‐5,6‐dione (pdon) in H₂O. In the crystal structure, a tetranuclear Zn₄(OH)₂ fragment is located on a crystallographic inversion centre which relates two subunits, each containing a [ZnN₂O₄] octahedron and a [ZnO₄] tetrahedron bridged by a μ₃‐OH group. The pdon ligand chelates to zinc through its two N atoms to form part of the [ZnN₂O₄] octahedron. The two crystallographically independent bdc²⁻ ligands are fully deprotonated and adopt μ₃‐κO:κO′:κO′′ and μ₄‐κO:κO′:κO′′:κO′′′ coordination modes, bridging three or four Zn^II cations, respectively, from two Zn₄(OH)₂ units. The Zn₄(OH)₂ fragment connects six neighbouring tetranuclear units through four μ₃‐bdc²⁻ and two μ₄‐bdc²⁻ ligands, forming a three‐dimensional framework with uninodal 6‐connected α‐Po topology, in which the tetranuclear Zn₄(OH)₂ units are considered as 6‐connected nodes and the bdc²⁻ ligands act as linkers. The uncoordinated water molecules are located on opposite sides of the Zn₄(OH)₂ unit and are connected to it through hydrogen‐bonding interactions involving hydroxide and carboxylate groups. The structure is further stabilized by extensive π–π interactions between the pdon and μ₄‐bdc²⁻ ligands.     

Tetra‐μ‐acetato‐κ8O:O′‐bis[(N1,N2‐di‐p‐anisylformamidine‐κN2)ruthenium(II)](Ru—Ru): an example of an axial bis‐adduct of {Ru2}4+ tetracarboxyl­ate with N‐donor ligands

The title compound, [Ru₂(C₂H₃O₂)₄(C₁₅H₁₆N₂O₂)₂], lies on a crystallographic inversion center and exhibits an Ru—Ru bond length of 2.2847 (8) Å. There are weak intramolecular hydrogen‐bonding interactions between the N¹,N²‐di‐p‐anisylformamidine (HDAniF) ligands and the bridging acetate ligands. The molecule is one of the few examples of a crystallographically characterized axial bis‐adduct of a {Ru₂}⁴⁺ complex with two N‐donor ligands.     

Poly[[di‐μ2‐aqua‐di‐μ5‐croconato(2–)‐nickel(II)dipotassium(I)] tetra­hydrate]

In the title compound, {[K₂Ni(C₅O₅)₂(H₂O)₂]·4H₂O}_n, the Ni atom lies on an inversion centre. Two inversion‐related croconate [4,5‐dihydroxy‐4‐cyclo­pentene‐1,2,3‐trionate(2−)] ligands and an Ni^II ion form a near‐planar symmetrical [Ni(C₅O₅)₂]²⁻ moiety. The near‐square coordination centre of the moiety is then extended to an octa­hedral core by vertically bonding two water mol­ecules in the [Ni(C₅O₅)₂(H₂O)₂]²⁻ coordination anion. The crystal structure is characterized by a three‐dimensional network, involving strong K⋯O⋯K binding, K⋯O—Ni binding and hydrogen bonding.     

An arsenate with the α‐CrPO4 structure type,NaCa1–xNi3–2xAl2x(AsO4)3 (x = 0.23): crystal structure,charge‐distribution and bond‐valence‐sum analyses

Since the discovery of electrochemically active LiFePO₄, materials with tunnel and layered structures built up of transition metals and polyanions have become the subject of much research. A new quaternary arsenate, sodium calcium trinickel aluminium triarsenate, NaCa_1–x Ni_3–2x Al_2x (AsO₄)₃ (x = 0.23), was synthesized using the flux method in air at 1023 K and its crystal structure was determined from single‐crystal X‐ray diffraction (XRD) data. This material was also characterized by qualitative energy‐dispersive X‐ray spectroscopy (EDS) analysis and IR spectroscopy. The crystal structure belongs to the α‐CrPO₄ type with the space group Imma . The structure is described as a three‐dimensional framework built up of corner‐edge‐sharing NiO₆, (Ni,Al)O₆ and AsO₄ polyhedra, with channels running along the [100] and [010] directions, in which the sodium and calcium cations are located. The proposed structural model has been validated by bond‐valence‐sum (BVS) and charge‐distribution (CHARDI) tools. The sodium ionic conduction pathways in the anionic framework were investigated by means of the bond‐valence site energy (BVSE) model, which predicted that the studied material will probably be a very poor Na⁺ ion conductor (bond‐valence activation energy ∼7 eV).     

The Electron Transfer Series [MoIII(bpy)3]n (n=3+, 2+, 1+, 0, 1−), and the Dinuclear Species [{MoIIICl(Mebpy)2}2(μ2‐O)]Cl2 and [{MoIV(tpy.)2}2(μ2‐MoO4)](PF6)2⋅4 MeCN

The electronic structures of the five members of the electron transfer series [Mo(bpy)₃]ⁿ (n=3+, 2+, 1+, 0, 1?) are determined through a combination of techniques: electro‐ and magnetochemistry, UV/Vis and EPR spectroscopies, and X‐ray crystallography. The mono‐ and dication are prepared and isolated as PF₆ salts for the first time. It is shown that all species contain a central Mo^III ion (4d³). The successive one‐electron reductions/oxidations within the series are all ligand‐based, involving neutral (bpy⁰), the π‐radical anion (bpy^.)^1?, and the diamagnetic dianion (bpy^2?)^2?: [Mo^III(bpy⁰)₃]³⁺ (S=3/2), [Mo^III(bpy^.)(bpy⁰)₂]²⁺ (S=1), [Mo^III(bpy^.)₂(bpy⁰)]¹⁺ (S=1/2), [Mo^III(bpy^.)₃] (S=0), and [Mo^III(bpy^.)₂(bpy^2?)]^1? (S=1/2). The previously described diamagnetic dication “[Mo^II(bpy⁰)₃](BF₄)₂” is proposed to be a diamagnetic dinuclear species [{Mo(bpy)₃}₂(μ₂‐O)](BF₄)₄. Two new polynuclear complexes are prepared and structurally characterized: [{Mo^IIICl(^Mebpy⁰)₂}₂(μ₂‐O)]Cl₂ and [{Mo^IV(tpy^.)₂}₂(μ₂‐Mo^VIO₄)](PF₆)₂?4 MeCN.     

Crystal Chemistry of the M11+,2+–M22+,3+–(H)‐Arsenites: the First Cadmium(II) Arsenite,Na4Cd7(AsO3)6

The crystal structures among M1–M2–(H)‐arsenites (M1 = Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Ca²⁺, Sr²⁺, Ba²⁺, Cd²⁺, Pb²⁺; M2 = Mg²⁺, Mn^2+,3+, Fe^2+,3+, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺) are less investigated. Up to now, only the structure of Pb₃Mn(AsO₃)₂(AsO₂OH) was described. The crystal structure of hydrothermally synthesized Na₄Cd₇(AsO₃)₆ was solved from the single‐crystal X‐ray diffraction data. Its trigonal crystal structure [space group R$\bar{3}$ , a = 9.5229(13), c = 19.258(4) Å, γ = 120°, V = 1512.5(5) ų, Z = 3] represents a new structure type. The As atoms are arranged in monomeric (AsO₃)^3– units. The surroundings of the two crystallographically unique sodium atoms show trigonal antiprismatic coordination, and two mixed Cd/Na sites are remarkably unequal showing tetrahedral and octahedral coordinations. Despite the 3D connection of the AsO₃ pyramids, (Cd,Na)O_x polyhedra and NaO₆ antiprisms, a layer‐like arrangement of the Na atoms positioned in the hexagonal channels formed by CdO₄ deformed tetrahedra and AsO₃ pyramids in z = 0, 1/3, 2/3 is to be mentioned. These pseudo layers are interconnected to the 3D network by (Cd,Na)O₆ octahedra. Raman spectra confirmed the presence of isolated AsO₃ pyramids.     

Synthesis and crystal structure of 2‐amino‐3‐hydroxypyridinium dioxido(pyridine‐2,6‐dicarboxylato‐κ3O2,N,O6)vanadate(V) and its conversion to nanostructured V2O5

2‐Amino‐3‐hydroxypyridinium dioxido(pyridine‐2,6‐dicarboxylato‐κ³O²,N,O⁶)vanadate(V), (C₅H₇N₂O)[V(C₇H₃NO₄)O₂] or [H(amino‐3‐OH‐py)][VO₂(dipic)], (I), was prepared by the reaction of VCl₃ with dipicolinic acid (dipicH₂) and 2‐amino‐3‐hydroxypyridine (amino‐3‐OH‐py) in water. The compound was characterized by elemental analysis, IR spectroscopy and X‐ray structure analysis, and consists of an anionic [VO₂(dipic)]⁻ complex and an H(amino‐3‐OH‐py)⁺ counter‐cation. The V^V ion is five‐coordinated by one O,N,O′‐tridentate dipic dianionic ligand and by two oxide ligands. Thermal decomposition of (I) in the presence of polyethylene glycol led to the formation of nanoparticles of V₂O₅. Powder X‐ray diffraction (PXRD) and scanning electron microscopy (SEM) were used to characterize the structure and morphology of the synthesized powder.     

Direct Synthesis of PbO Nanoparticles From a Lead(II) Nano Coordination Polymer Precursor: Synthesis,Crystal Structure,and DFT Calculations of [Pb2(dmp)2(μ‐N3)2(μ‐ClO4)2]n with the First Pb2‐(μ‐ClO4)2 Unit

Nanostructures of a new coordination polymer of divalent lead with the ligand 2, 9‐dimethyl‐1, 10‐phenanthroline (dmp) containing the first Pb₂‐(μ‐ClO₄)₂ motif, [Pb₂(dmp)₂(μ‐N₃)₂(μ‐ClO₄)₂]_n ( 1 ), was synthesized by a sonochemical method that produces the coordination polymers at nano size. The new nanostructure was characterized by scanning electron microscopy, X‐ray powder diffraction, IR, ¹H NMR and ¹³C NMR spectroscopy, and elemental analysis. Compound 1 was structurally characterized by single‐crystal X‐ray diffraction and the single‐crystal X‐ray data shows that the coordination number of Pb^II ions is six, (PbN₄O₂), with two N‐donor atoms from aza‐aromatic base ligands and four O‐donors from two perchlorate anions and two N‐donors from two azide anions. It has a “stereo‐chemically active” electron lone pair, and the coordination sphere is hemidirected. The supramolecular features in these complexes are guided and controlled by weak directional intermolecular interactions. The chains interact with each other through π–π stacking interactions creating a 3D framework. The structure of the title complex was optimized by density functional theory calculations. Calculated structural parameters and IR spectra for the title complex are in agreement with the crystal structure. The PbO nanoparticles were obtained by thermolysis of 1 at 180 °C with oleic acid as a surfactant. The average diameter of the nanoparticles was estimated by the Scherrer equation to be 23 nm. The morphology and size of the prepared PbO samples were further observed using SEM.     

A novel gallium arsenate organically templated by propane‐1,3‐diyldi­ammonium with a ULM‐3‐type open framework: [Ga3(AsO4)3(OH)F](C3H12N2)·H2O

Crystals of the title oxy­fluorinated gallium arsenate, viz. tris­(arsenato)­fluoro­hydro­xotrigallium ­propane‐1,3‐diyldiammonium monohydrate, were synthesized hydro­thermally at 453 K under autogenous pressure, using 1,3‐di­amino­propane as the structure‐directing agent. The solid crystallizes in the ortho­rhombic system and its structure was determined from single‐crystal X‐ray diffraction analysis. The structure is similar to that of gallium or aluminium phosphates with the ULM‐3 structural type and is built up from a three‐dimensional anionic framework composed of corner‐linked hexameric Ga₃(AsO₄)₃(OH)F units. The Ga atoms have an octahedral [GaO₄(OH)F] or trigonal‐bipyramidal [GaO₄(OH) and GaO₄F] coordination. These units are connected to one another and to the tetrahedral AsO₄ groups via OH or F bridges. The three‐dimensional framework contains ten‐ring channels along [010], crosslinked by eight‐ring channels along [110] and [10]. The diprotonated organic species and water mol­ecules reside within the ten‐ring channels. The cation is linked to the framework via an N—H⋯F hydrogen bond. A strong N—H⋯O hydrogen bond links the cation and the water mol­ecule.     

Complexes of nickel(II) and copper(II) with 1,2,4‐triazole‐3‐carboxylic acid and of cobalt(III) with 3‐amino‐1,2,4‐triazole‐5‐carboxylic acid

Because of their versatile coordination modes and strong coordination ability for metals, triazole ligands can provide a wide range of possibilities for the construction of metal–organic frameworks. Three transition‐metal complexes, namely bis(μ‐1,2,4‐triazol‐4‐ide‐3‐carboxylato)‐κ³N ²,O :N ¹;κ³N ¹:N ²,O‐bis[triamminenickel(II)] tetrahydrate, [Ni₂(C₃HN₃O₂)₂(NH₃)₆]·4H₂O, (I), catena‐poly[[[diamminediaquacopper(II)]‐μ‐1,2,4‐triazol‐4‐ide‐3‐carboxylato‐κ³N ¹:N ⁴,O‐[diamminecopper(II)]‐μ‐1,2,4‐triazol‐4‐ide‐3‐carboxylato‐κ³N ⁴,O :N ¹] dihydrate], {[Cu₂(C₃HN₃O₂)₂(NH₃)₄(H₂O)₂]·2H₂O}_n , (II), (μ‐5‐amino‐1,2,4‐triazol‐1‐ide‐3‐carboxylato‐κ²N ¹:N ²)di‐μ‐hydroxido‐κ⁴O :O‐bis[triamminecobalt(III)] nitrate hydroxide trihydrate, [Co₂(C₃H₂N₄O₂)(OH)₂(NH₃)₆](NO₃)(OH)·3H₂O, (III), with different structural forms have been prepared by the reaction of transition metal salts, i.e. NiCl₂, CuCl₂ and Co(NO₃)₂, with 1,2,4‐triazole‐3‐carboxylic acid or 3‐amino‐1,2,4‐triazole‐5‐carboxylic acid hemihydrate in aqueous ammonia at room temperature. Compound (I) is a dinuclear complex. Extensive O—H…O, O—H…N and N—H…O hydrogen bonds and π–π stacking interactions between the centroids of the triazole rings contribute to the formation of the three‐dimensional supramolecular structure. Compound (II) exhibits a one‐dimensional chain structure, with O—H…O hydrogen bonds and weak O—H…N, N—H…O and C—H…O hydrogen bonds linking anions and lattice water molecules into the three‐dimensional supramolecular structure. Compared with compound (I), compound (III) is a structurally different dinuclear complex. Extensive N—H…O, N—H…N, O—H…N and O—H…O hydrogen bonding occurs in the structure, leading to the formation of the three‐dimensional supramolecular structure.     

The novel arsenate Na4Co7−xAl2/3x(AsO4)6 (x = 1.37): crystal structure,charge‐distribution and bond‐valence‐sum investigations

The title compound, tetrasodium cobalt aluminium hexaarsenate, Na₄Co_7−xAl_2/3x(AsO₄)₆ (x = 1.37), is isostructural with K₄Ni₇(AsO₄)₆; however, in its crystal structure, some of the Co²⁺ ions are substituted by Al³⁺ in a fully occupied octahedral site (site symmetry 2/m) and a partially occupied tetrahedral site (site symmetry 2). A third octahedral site is fully occupied by Co²⁺ ions only. One of the two independent tetrahedral As atoms and two of its attached O atoms reside on a mirror plane, as do two of the three independent Na⁺ cations, all of which are present at half‐occupancy. The proposed structural model based on a careful investigation of the crystal data is supported by charge‐distribution (CHARDI) analysis and bond‐valence‐sum (BVS) calculations. The correlation between the X‐ray refinement and the validation results is discussed.     

Poly[[di‐μ3‐acetato‐di‐μ2‐aqua‐diaqua‐di‐μ3‐hydroxo‐tricopper(II)] naphthalene‐1,5‐disulfonate]

The crystal structure of the title complex, {[Cu₃(C₂H₃O₂)₂(OH)₂(H₂O)₄](C₁₀H₆O₆S₂)}_n, is built of infinite polymeric cationic {[Cu₃(C₂H₃O₂)₂(H₂O)₄(OH)₂]²⁺}_n chains stretching along the a axis, with naphthalene‐1,5‐disulfonate (1,5‐nds) anions in between. One independent Cu^II cation and the 1,5‐nds anion occupy special positions on crystallographic inversion centres. Each Cu^II cation has an octa­hedral coordination environment formed by two carboxyl O atoms, two hydroxo O atoms and two water mol­ecules. The carboxyl­ate and hydroxo groups perform a bridging function, linking adjacent Cu atoms in the chain, with a shortest Cu⋯Cu distance of 2.990 (3) Å. The chains are further linked into a three‐dimensional supra­molecular framework via hydrogen‐bonding inter­actions involving the sulfonate groups of the 1,5‐­nds dianions.     

Construction of (3,8)‐connected three‐dimensional cobalt(II) and copper(II) coordination polymers with 1,3‐bis[(1,2,4‐triazol‐4‐yl)methyl]benzene and benzene‐1,3,5‐tricarboxylate ligands

Coordination polymers (CPs) have been widely studied because of their diverse and adjustable topologies and wide‐ranging applications in luminescence, chemical sensors, magnetism, photocatalysis, gas adsorption and separation. In the present work, two coordination polymers, namely poly[(μ₅‐benzene‐1,3,5‐tricarboxylato‐κ⁶O¹:O^1′:O³:O³:O⁵,O^5′){μ₃‐1,3‐bis[(1,2,4‐triazol‐4‐yl)methyl]benzene‐κ³N:N′:N′′}di‐μ₃‐hydroxido‐dicobalt(II)], [Co₂(C₉H₃O₆)(OH)(C₁₂H₁₂N₆)]_n or [Co₂(btc)(OH)(mtrb)]_n, (1), and poly[[diaquabis(μ₃‐benzene‐1,3,5‐tricarboxylato‐κ³O¹:O³:O⁵)bis{μ₃‐1,3‐bis[(1,2,4‐triazol‐4‐yl)methyl]benzene‐κ³N:N′:N′′}tetra‐μ₃‐hydroxido‐tetracopper(II)] monohydrate], {[Cu₄(C₉H₃O₆)₂(OH)₂(C₁₂H₁₂N₆)₂(H₂O)₂]·H₂O}_n or {[Cu₄(btc)₂(OH)₂(mtrb)₂(H₂O)₂]·H₂O}_n, (2), were synthesized by the hydrothermal method using 1,3‐bis[(1,2,4‐triazol‐4‐yl)methyl]benzene (mtrb) and benzene‐1,3,5‐tricarboxylate (btc^3?). CP (1) exhibits a (3,8)‐coordinated three‐dimensional (3D) network of the 3,8T38 topological type, with a point symbol of {4,5,6}₂{4²·5⁶·6¹⁶·7²·8²}, based on the tetranuclear hydroxide cobalt(II) cluster [Co₄(μ₃‐OH)₂]. CP (2) shows a (3,8)‐coordinated tfz‐d topology, with a point symbol of {4₃}₂{4⁶·6¹⁸·8⁴}, based on the tetranuclear hydroxide copper(II) cluster [Cu₄(μ₃‐OH)₂]. The different (3,8)‐coordinated 3D networks based on tetranuclear hydroxide–metal clusters of (1) and (2) are controlled by the different central metal ions [Co^II for (1) and Cu^II for (2)]. The thermal stabilities and solid‐state optical diffuse‐reflection spectra were measured. The energy band gaps (E_g) obtained for (1) and (2) were 2.72 and 2.29 eV, respectively. CPs (1) and (2) exhibit good photocatalytic degradation of the organic dyes methylene blue (MB) and rhodamine B (RhB) under visible‐light irradiation.     

Octa­hedral–tetra­hedral framework structures of InAsO4·H2O and PbIn(AsO4)(AsO3OH)

Indium arsenate(V) monohydrate, InAsO₄·H₂O, (I), crystallizes in the structure type of MnMoO₄·H₂O. The structure is built of In₂O₈(H₂O)₂ dimers (mean In—O = 2.150 Å) corner‐linked to slightly distorted AsO₄ tetra­hedra (mean As—O = 1.686 Å). The linkage results in a three‐dimensional framework, with small voids into which the apical water ligand of the InO₅(H₂O) octa­hedron points. The hydrogen bonds in (I) are of medium strength. Lead(II) indium arsenate(V) hydrogen arsenate(V), PbIn(AsO₄)(AsO₃OH), (II), represents the first reported lead indium arsenate. It is characterized by a framework structure of InO₆ octa­hedra corner‐linked to AsO₄ and AsO₃OH tetra­hedra. The resulting voids are occupied by Pb₂O₁₀(OH)₂ dimers built of two edge‐sharing highly distorted PbO₆(OH) polyhedra (mean Pb—O = 2.623 Å). The compound is isotypic with PbFe^III(AsO₄)(AsO₃OH). The average In—O bond length in (II) is 2.157 Å. In both arsenates, all atoms are in general positions.     

Three novel topologically different metal–organic frameworks built from 3‐nitro‐4‐(pyridin‐4‐yl)benzoic acid

The design and synthesis of metal–organic frameworks (MOFs) have attracted much interest due to the intriguing diversity of their architectures and topologies. However, building MOFs with different topological structures from the same ligand is still a challenge. Using 3‐nitro‐4‐(pyridin‐4‐yl)benzoic acid (HL) as a new ligand, three novel MOFs, namely poly[[(N,N‐dimethylformamide‐κO)bis[μ₂‐3‐nitro‐4‐(pyridin‐4‐yl)benzoato‐κ³O,O′:N]cadmium(II)] N,N‐dimethylformamide monosolvate methanol monosolvate], {[Cd(C₁₂H₇N₂O₄)₂(C₃H₇NO)]·C₃H₇NO·CH₃OH}_n, ( 1 ), poly[[(μ₂‐acetato‐κ²O:O′)[μ₃‐3‐nitro‐4‐(pyridin‐4‐yl)benzoato‐κ³O:O′:N]bis[μ₃‐3‐nitro‐4‐(pyridin‐4‐yl)benzoato‐κ⁴O,O′:O′:N]dicadmium(II)] N,N‐dimethylacetamide disolvate monohydrate], {[Cd₂(C₁₂H₇N₂O₄)₃(CH₃CO₂)]·2C₄H₉NO·H₂O}_n, ( 2 ), and catena‐poly[[[diaquanickel(II)]‐bis[μ₂‐3‐nitro‐4‐(pyridin‐4‐yl)benzoato‐κ²O:N]] N,N‐dimethylacetamide disolvate], {[Ni(C₁₂H₇N₂O₄)₂(H₂O)₂]·2C₄H₉NO}_n, ( 3 ), have been prepared. Single‐crystal structure analysis shows that the Cd^II atom in MOF ( 1 ) has a distorted pentagonal bipyramidal [CdN₂O₅] coordination geometry. The [CdN₂O₅] units as 4‐connected nodes are interconnected by L^? ligands to form a fourfold interpenetrating three‐dimensional (3D) framework with a dia topology. In MOF ( 2 ), there are two crystallographically different Cd^II ions showing a distorted pentagonal bipyramidal [CdNO₆] and a distorted octahedral [CdN₂O₄] coordination geometry, respectively. Two Cd^II ions are connected by three carboxylate groups to form a binuclear [Cd₂(COO)₃] cluster. Each binuclear cluster as a 6‐connected node is further linked by acetate groups and L^? ligands to produce a non‐interpenetrating 3D framework with a pcu topology. MOF ( 3 ) contains two crystallographically distinct Ni^II ions on special positions. Each Ni^II ion adopts an elongated octahedral [NiN₂O₄] geometry. Each Ni^II ion as a 4‐connected node is linked by L^? ligands to generate a two‐dimensional network with an sql topology, which is further stabilized by two types of intermolecular OW—HW…O hydrogen bonds to form a 3D supramolecular framework. MOFs ( 1 )–( 3 ) were also characterized by powder X‐ray diffraction, IR spectroscopy and thermogravimetic analysis. Furthermore, the solid‐state photoluminescence of HL and MOFs ( 1 ) and ( 2 ) have been investigated. The photoluminescence of MOFs ( 1 ) and ( 2 ) are enhanced and red‐shifted with respect to free HL. The gas adsorption investigation of MOF ( 2 ) indicates a good separation selectivity (71) of CO₂/N₂ at 273 K (i.e. the amount of CO₂ adsorption is 71 times higher than N₂ at the same pressure).     

Two two‐dimensional hydrogen‐bonded coordination networks: bis(3‐carboxybenzoato‐κO)bis(4‐methyl‐1H‐imidazole‐κN3)copper(II) and bis(3‐methylbenzoato‐κN)bis(4‐methyl‐1H‐imidazole‐κN3)copper(II) monohydrate

The title two‐dimensional hydrogen‐bonded coordination compounds, [Cu(C₈H₅O₄)₂(C₄H₆N₂)₂], (I), and [Cu(C₈H₇O₂)₂(C₄H₆N₂)₂]·H₂O, (II), have been synthesized and structurally characterized. The molecule of complex (I) lies across an inversion centre, and the Cu²⁺ ion is coordinated by two N atoms from two 4‐methyl‐1H‐imidazole (4‐MeIM) molecules and two O atoms from two 3‐carboxybenzoate (HBDC⁻) anions in a square‐planar geometry. Adjacent molecules are linked through intermolecular N—H...O and O—H...O hydrogen bonds into a two‐dimensional sheet with (4,4) topology. In the asymmetric part of the unit cell of (II) there are two symmetry‐independent molecules, in which each Cu²⁺ ion is also coordinated by two N atoms from two 4‐MeIM molecules and two O atoms from two 3‐methylbenzoate (3‐MeBC⁻) anions in a square‐planar coordination. Two neutral complex molecules are held together via N—H...O(carboxylate) hydrogen bonds to generate a dimeric pair, which is further linked via discrete water molecules into a two‐dimensional network with the Schläfli symbol (4³)₂(4⁶,6⁶,8³). In both compounds, as well as the strong intermolecular hydrogen bonds, π–π interactions also stabilize the crystal stacking.     

Ribbon and Self‐Penetrated Hybrid Copper Molybdates with Ancillary Bis(4‐pyridylmethyl)piperazine Ligands

Hybrid copper molybdates containing the long‐spanning bis(4‐pyridylmethyl) piperazine (bpmp) ligand were prepared via hydrothermal synthesis and structurally characterized by single‐crystal X‐ray diffraction. The reduced copper phase and major product [Cu₄(MoO₄)₂(bpmp)₄]_n ( 1 ) shows 1D ribbon motifs with embedded {Cu^I₂O₂} dimeric units, built from the bpmp pillaring of [Cu₄(MoO₄)₂] linear clusters. The oxidized copper phase and minor product {[Cu₂(MoO₄)₂(bpmp)₄] · 24H₂O}_n ( 2 ) displays [Cu(bpmp)₂]_n²ⁿ⁺ mutually inclined interpenetrated cationic layers cross‐pillared by molybdate tetrahedra into an unprecedented 6‐connected self‐penetrated network with 4⁸5²6⁵ topology.     

[μ‐1κ2O,O′:2(η5)‐Cyclopentadienylcarboxylato][2(η5)‐diphenylphosphinocyclopentadienyl]bis[1,1(η5)‐tetramethylcyclopentadienyl]iron(II)titanium(III)

Reacting stoichiometric amounts of 1‐(diphenylphosphino)ferrocene­carboxylic acid and [Ti(η⁵‐C₅HMe₄)₂(η²‐Me₃SiC[triple‐bond]CSiMe₃)] produced the title carboxyl­atotitanocene complex, [{μ‐1κ²O,O′:2(η⁵)‐C₅H₄CO₂}{2(η⁵)‐C₅H₄P(C₆H₅)₂}{1(η⁵)‐C₅H(CH₃)₄}₂Fe^IITi^III] or [FeTi(C₉H₁₃)₂(C₆H₄O₂)(C₁₇H₁₄P)]. The angle subtended by the Ti/O/O′ plane, where O and O′ are the donor atoms of the κ²‐carboxy­late group, and the plane of the carboxyl‐substituted ferrocene cyclo­penta­dienyl is 24.93 (6)°.     

Controlled Synthesis of Heterotrimetallic Single‐Chain Magnets from Anisotropic High‐Spin 3 d–4 f Nodes and Paramagnetic Spacers

By using the node‐and‐spacer approach in suitable solvents, four new heterotrimetallic 1D chain‐like compounds (that is, containing 3d–3d′–4f metal ions), {[Ni(L)Ln(NO₃)₂(H₂O)Fe(Tp*)(CN)₃] ? 2 CH₃CN ? CH₃OH}_n (H₂L=N,N′‐bis(3‐methoxysalicylidene)‐1,3‐diaminopropane, Tp*=hydridotris(3,5‐dimethylpyrazol‐1‐yl)borate; Ln=Gd ( 1 ), Dy ( 2 ), Tb ( 3 ), Nd ( 4 )), have been synthesized and structurally characterized. All of these compounds are made up of a neutral cyanide‐ and phenolate‐bridged heterotrimetallic chain, with a {? Fe? C?N? Ni(? O? Ln)? N?C? }_n repeat unit. Within these chains, each [(Tp*)Fe(CN)₃]^? entity binds to the Ni^II ion of the [Ni(L)Ln(NO₃)₂(H₂O)]⁺ motif through two of its three cyanide groups in a cis mode, whereas each [Ni(L)Ln(NO₃)₂(H₂O)]⁺ unit is linked to two [(Tp*)Fe(CN)₃]^? ions through the Ni^II ion in a trans mode. In the [Ni(L)Ln(NO₃)₂(H₂O)]⁺ unit, the Ni^II and Ln^III ions are bridged to one other through two phenolic oxygen atoms of the ligand (L). Compounds 1 – 4 are rare examples of 1D cyanide‐ and phenolate‐bridged 3d–3d′–4f helical chain compounds. As expected, strong ferromagnetic interactions are observed between neighboring Fe^III and Ni^II ions through a cyanide bridge and between neighboring Ni^II and Ln^III (except for Nd^III) ions through two phenolate bridges. Further magnetic studies show that all of these compounds exhibit single‐chain magnetic behavior. Compound 2 exhibits the highest effective energy barrier (58.2 K) for the reversal of magnetization in 3d/4d/5d–4f heterotrimetallic single‐chain magnets.