Ligand‐Controlled α‐ and β‐Arylation of Acyclic N‐Boc Amines

The palladium‐catalyzed ligand‐controlled arylation of α‐zincated acyclic amines, obtained by directed α‐lithiation and transmetalation, is described. Whereas PtBu₃ gave rise to α‐arylated Boc‐protected amines, more flexible N‐phenylazole‐based phosphine ligands induced major β‐arylation through migrative cross‐coupling.     

A Highly Efficient Gold‐Catalyzed Photoredox α‐C(sp3)H Alkynylation of Tertiary Aliphatic Amines with Sunlight

A new α‐C(sp³)? H alkynylation of unactivated tertiary aliphatic amines with 1‐iodoalkynes as radical alkynylating reagents in the presence of [Au₂(μ‐dppm)₂]²⁺ in sunlight provides propargylic amines. Based on mechanistic studies, a C? C coupling of an α‐aminoalkyl radical and an alkynyl radical is proposed for the C(sp³)? C(sp) bond formation. The mild, convenient, efficient, and highly selective C(sp³)? H alkynylation reaction shows excellent regioselectivity and good functional‐group compatibility. A scale‐up to gram quantities is possible with sunlight used as a clean and sustainable energy source.     

Activation of CH Bonds through Oxidant‐Free Photoredox Catalysis: Cross‐Coupling Hydrogen‐Evolution Transformation of Isochromans and β‐Keto Esters

The direct and controlled activation of a C(sp³)?H bond adjacent to an O atom is of particular synthetic value for the conventional derivatization of ethers or alcohols. In general, stoichiometric amounts of an oxidant are required to remove an electron and a hydrogen atom of the ether for subsequent transformations. Herein, we demonstrate that the activation of a C?H bond next to an O atom could be achieved under oxidant‐free conditions through photoredox‐neutral catalysis. By using a commercial dyad photosensitizer (Acr⁺‐Mes ClO₄^?, 9‐mesityl‐10‐methylacridinium perchlorate) and an easily available cobaloxime complex (Co(dmgBF₂)₂?2 MeCN, dmg=dimethylglyoxime), the nucleophilic addition of β‐keto esters to oxonium species, which is rarely observed in photocatalysis, leads to the corresponding coupling products and H₂ in moderate to good yields under visible‐light irradiation. Mechanistic studies suggest that both isochroman and the cobaloxime complex quench the electron‐transfer state of this dyad photosensitizer and that benzylic C?H bond cleavage is probably the rate‐determining step of this cross‐coupling hydrogen‐evolution transformation.     

Practical Synthesis of anti‐β‐Hydroxy‐α‐Amino Acids by PdII‐Catalyzed Sequential C(sp3)H Functionalization

An improved and practical procedure for the stereoselective synthesis of anti‐β‐hydroxy‐α‐amino acids (anti‐βhAAs), by palladium‐catalyzed sequential C(sp³)?H functionalization directed by 8‐aminoquinoline auxiliary, is described. followed by a previously established monoarylation and/or alkylation of the β‐methyl C(sp³)?H of alanine derivative, β‐acetoxylation of both alkylic and benzylic methylene C(sp³)?H bonds affords various anti‐β‐hydroxy‐α‐amino acid derivatives. As an example, the synthesis of β‐mercapto‐α‐amino acids, which are highly important to the extension of native chemical ligation chemistry beyond cysteine, is described. The synthetic potential of this protocol is further demonstrated by the synthesis of diverse β‐branched α‐amino acids. The observed diastereoselectivities are strongly influenced by electronic effects of aromatic AAs and steric effects of the linear side‐chain AAs, which could be explained by the competition of intramolecular C?OAc bond reductive elimination from Pd^IV intermediates vs. intermolecular attack by an external nucleophile (AcO^?) in an S_N2‐type process.     

Palladium‐Catalyzed [3+3] Annulation between Diarylamines and α,β‐Unsaturated Acids through CH Activation: Direct Access to 4‐Substituted 2‐Quinolinones

A C?H activation strategy has been successfully employed for the high‐yielding synthesis of a diverse array of 4‐substituted 2‐quinolinone species by a palladium‐catalyzed dehydrogenative coupling involving diarylamines. This intermolecular annulation approach incorporates readily available α,β‐unsaturated carboxylic acids as the coupling partner by suppressing the facile decarboxylation. Based on preliminary mechanistic studies, a reaction sequence is proposed, involving ortho palladation, π‐coordination, β‐migratory insertion, and β‐hydride elimination.     

Palladium‐Catalyzed Oxidative Cross‐Coupling of α‐Cyanoketene Dithioacetals with Olefins

Efficient palladium‐catalyzed cross‐coupling reactions of the internal olefins α‐cyanoketene dithioacetals with a variety of olefins were achieved in dioxane/HOAc/DMSO (9:3:1 v/v/v) under air atmosphere or by means of AgOAc as the terminal oxidant. Electron‐deficient terminal olefins reacted to form the linear diene derivatives with air as the oxidant. Styrenes underwent the cross‐coupling to give both the linear and branched dienes when using AgOAc as the oxidant. Unactivated cyclic and linear internal olefin substrates both reacted in the presence of a catalytic amount of benzoquinone in air to produce skipped dienes. The typical products were structurally confirmed by X‐ray crystallography.     

Copper‐Catalyzed Radical/Radical CH/PH Cross‐Coupling: α‐Phosphorylation of Aryl Ketone O‐Acetyloximes

The selective radical/radical cross‐coupling of two different organic radicals is a great challenge due to the inherent activity of radicals. In this paper, a copper‐catalyzed radical/radical C? H/P? H cross‐coupling has been developed. It provides a radical/radical cross‐coupling in a selective manner. This work offers a simple way toward β‐ketophosphonates by oxidative coupling of aryl ketone o‐acetyloximes with phosphine oxides using CuCl as catalyst and PCy₃ as ligand in dioxane under N₂ atmosphere at 130 °C for 5 h, and yields ranging from 47 % to 86 %. The preliminary mechanistic studies by electron paramagnetic resonance (EPR) showed that, 1) the reduction of ketone o‐acetyloximes generates iminium radicals, which could isomerize to α‐sp³‐carbon radical species; 2) phosphorus radicals were generated from the oxidation of phosphine oxides. Various aryl ketone o‐acetyloximes and phosphine oxides were suitable for this transformation.     

Dehydrogenative Carbon–Carbon Bond Formation Using Alkynyloxy Moieties as Hydrogen‐Accepting Directing Groups

In the presence of a catalyst system consisting of Pd(OAc)₂, PCy₃, and Zn(OAc)₂, the reaction of alkynyl aryl ethers with bicycloalkenes, α,ß‐unsaturated esters, or heteroarenes results in the site‐selective cleavage of two C? H bonds followed by the formation of C? C bonds. In all cases, the alkynyloxy group acts as a directing group for the activation of an ortho C? H bond and as a hydrogen acceptor, thus rendering the use of additives such as an oxidant or base unnecessary.     

Enantioselective ortho‐CH Cross‐Coupling of Diarylmethylamines with Organoborons

The commonly used para‐nitrobenzenesulfonyl (nosyl) protecting group is employed to direct the C? H activation of amines for the first time. An enantioselective ortho‐C? H cross‐coupling between nosyl‐protected diarylmethylamines and arylboronic acid pinacol esters has been achieved utilizing chiral mono‐N‐protected amino acid (MPAA) ligands as a promoter.     

Alkene Isomerization–Hydroarylation Tandem Catalysis: Indole C2‐Alkylation with Aryl‐Substituted Alkenes Leading to 1,1‐Diarylalkanes

A cobalt‐N‐heterocyclic carbene catalyst generated from CoBr₂, imidazolium salt, and cyclohexylmagnesium bromide was found to promote the imine‐directed C2‐alkylation of indoles with nonconjugated arylalkenes through a tandem alkene isomerization–hydroarylation process, affording 1,1‐diarylalkanes with exclusive regioselectivity. The feasibility of the tandem catalysis was demonstrated for allyl‐, homoallyl‐, and bishomoallylbenzene derivatives. The catalytic system is also applicable to a variety of β‐substituted styrene derivatives. Mechanistic experiments using deuterium‐labeled indole substrate and Grignard reagent provided insight into the cobalt‐mediated C? H activation step, which likely involves exchange of the C2‐hydrogen atom of the former and the β‐hydrogen atoms of the latter.     

Palladium‐Catalyzed Carbonylative [3+2+1] Annulation of N‐Aryl‐Pyridine‐2‐Amines with Internal Alkynes by CH Activation: Facile Synthesis of 2‐Quinolinones

We describe here a novel procedure for the synthesis of highly substituted 2‐quinolinones. By this newly developed approach, 2‐quinolinone derivatives were prepared in moderate to good yields by carbonylative cyclization of N‐aryl‐pyridine‐2‐amines and internal alkynes by C?H activation. Remarkably, [Mo(CO)₆] was applied as a solid CO source and the reaction proceeded in an atom economic manner.     

Copper‐Catalyzed Coupling of Oxime Acetates with Sodium Sulfinates: An Efficient Synthesis of Sulfone Derivatives

Sulfone derivatives are important synthetic intermediates. However, the general method for their preparation is through traditional coupling reaction: the alkylation of sodium sulfinates with phenacyl halides. Based on our previous work on sodium sulfinates and oxime acetates, we herein report a novel method for sulfone derivatives by oxidative coupling with sodium sulfinates and oxime acetates using copper as catalyst. The sulfonylvinylamine products could be formed in excellent yields. Upon hydrolysis by silica gel in CH₂Cl₂, β‐ketosulfones could also be efficiently constructed. Various sulfonylvinylamines and β‐ketosulfones were obtained in good to excellent yields under the optimized reaction conditions. Mechanistic studies indicated that this transformation involved copper‐catalyzed N? O bond cleavage, activation of a vinyl sp² C? H bond, and C? S bond formation. The oxime acetates act as both a substrate and an oxidant, thus the reaction needs no additional oxidants or additives.     

Copper‐supported β‐cyclodextrin‐functionalized magnetic nanoparticles: Efficient multifunctional catalyst for one‐pot ‘green’ synthesis of 1,2,3‐triazolylquinazolinone derivatives

The green synthesis of 2‐(4‐((1‐phenyl‐1H‐1,2,3‐triazol‐4‐yl)oxy)phenyl)quinazolin‐4(3H)‐one derivatives is reported. The catalyst for this synthesis is copper‐supported β‐cyclodextrin‐functionalized magnetic silica–iron oxide nanoparticles ([Cu@BCD@SiO₂@SPION]). [Cu@BCD@SiO₂@SPION] simultaneously catalyses ‘click’ reaction, oxidation of C? N bond and multicomponent reaction. The desired 1,2,3‐triazolylquinazolinone product is easily obtained in water at room temperature under mild reaction conditions. Another advantage of the catalyst is its reusability. It can simply be isolated using an external magnet and reused in reactions with no significant decrease in catalyst efficiency. Transmission electron microscopy, scanning electron microscopy, vibrating sample magnetometry and Fourier transform infrared spectroscopy are used for exact characterization of the [Cu@BCD@SiO₂@SPION] catalyst.     

[RhIII(Cp*)]‐Catalyzed ortho‐Selective Direct C(sp2)H Bond Amidation/Amination of Benzoic Acids by N‐Chlorocarbamates and N‐Chloromorpholines. A Versatile Synthesis of Functionalized Anthranilic Acids

A Rh^III‐catalyzed direct ortho‐C?H amidation/amination of benzoic acids with N‐chlorocarbamates/N‐chloromorpholines was achieved, giving anthranilic acids in up to 85 % yields with excellent ortho‐selectivity and functional‐group tolerance. Successful benzoic acid aminations were achieved with carbamates bearing various amide groups including NHCO₂Me, NHCbz, and NHTroc (Cbz=carbobenzyloxy; Troc=trichloroethylchloroformate), as well as secondary amines, such as morpholines, piperizines, and piperidines, furnishing highly functionalized anthranilic acids. A stoichiometric reaction of a cyclometallated rhodium(III) complex of benzo[h]quinoline with a silver salt of N‐chlorocarbamate afforded an amido–rhodium(III) complex, which was isolated and structurally characterized by X‐ray crystallography. This finding confirmed that the C?N bond formation results from the cross‐coupling of N‐chlorocarbamate with the aryl–rhodium(III) complex. Yet, the mechanistic details regarding the C?N bond formation remain unclear; pathways involving 1,2‐aryl migration and rhodium(V)– nitrene are plausible.     

Site‐Selective Approach to β‐Fluorination: Photocatalyzed Ring Opening of Cyclopropanols

To expand upon the recent pioneering reports of catalyzed sp³ C?H fluorination methods, the next rational step is to focus on directing “radical‐based fluorination” more effectively. One potential solution entails selective C?C bond activation as a prelude to selective fluorination. Herein, we report the tandem photocatalyzed ring‐opening/fluorination reactions of cyclopropanols by 1,2,4,5‐tetracyanobenzene (TCB) and Selectfluor to afford a process tantamount to site‐selective β‐fluorination of carbonyl‐containing compounds. This new approach provides a synthetically mild and operationally simple route to otherwise difficult‐to‐prepare β‐fluorinated products in good yields and with good‐to‐excellent regioselectivity. Remarkably, substrates that contain other usually reactive (e.g., benzylic) sites undergo ring‐opening fluorination preferably. The versatility of this method to give cyclic β‐fluorides from tertiary cyclopropanols and γ‐fluoro alcohols is also highlighted.     

Rhodium(I)‐Catalyzed Decarbonylative Spirocyclization through CC Bond Cleavage of Benzocyclobutenones: An Efficient Approach to Functionalized Spirocycles

The rhodium‐catalyzed formation of all‐carbon spirocenters involves a decarbonylative coupling of trisubstituted cyclic olefins and benzocyclobutenones through C? C activation. The metal–ligand combination [{Rh(CO)₂Cl}₂]/P(C₆F₅)₃ catalyzed this transformation most efficiently. A range of diverse spirocycles were synthesized in good to excellent yields and many sensitive functional groups were tolerated. A mechanistic study supports a hydrogen‐transfer process that occurs through a β‐H elimination/decarbonylation pathway.     

Sulfonamide‐Promoted Palladium(II)‐Catalyzed Alkylation of Unactivated Methylene C(sp3)H Bonds with Alkyl Iodides

The alkylation of unactivated β‐methylene C(sp³)? H bonds of α‐amino acid substrates with a broad range of alkyl iodides using Pd(OAc)₂ as the catalyst is described. The addition of NaOCN and 4‐Cl‐C₆H₄SO₂NH₂ was found to be crucial for the success of this transformation. The reaction is compatible with a diverse array of functional groups and proceeds with high diastereoselectivity. Furthermore, various β,β‐hetero‐dialkyl‐ and β‐alkyl‐β‐aryl‐α‐amino acids were prepared by sequential C(sp³)? H functionalization of an alanine‐derived substrate, thus providing a versatile strategy for the stereoselective synthesis of unnatural β‐disubstituted α‐amino acids.     

Pd‐Catalyzed Regioselective Activation of gem‐Difluorinated Cyclopropanes: A Highly Efficient Approach to 2‐Fluorinated Allylic Scaffolds

An unprecedented Pd‐catalyzed regioselective activation of gem‐difluorinated cyclopropanes induced by C? C bond cleavage is reported. It provides a general and efficient access to a variety of 2‐fluoroallylic amines, ethers, esters, and alkylation products in high Z‐selectivity, which are important skeletons in many biologically active molecules. In addition, the transformation represents the first general application of gem‐difluorinated cyclopropanes as reaction partners in transition‐metal‐catalyzed cross‐coupling reaction.     

Exploring Bis(cyclometalated) Ruthenium(II) Complexes as Active Catalyst Precursors: Room‐Temperature Alkene–Alkyne Coupling for 1,3‐Diene Synthesis

Described is the development of a new class of bis(cyclometalated) ruthenium(II) catalyst precursors for C? C coupling reactions between alkene and alkyne substrates. The complex [(cod)Ru(3‐methallyl)₂] reacts with benzophenone imine or benzophenone in a 1:2 ratio to form bis(cyclometalated) ruthenium(II) complexes ( 1 ). The imine‐ligated complex 1 a promoted room‐temperature coupling between acrylic esters and amides with internal alkynes to form 1,3‐diene products. A proposed catalytic cycle involves C? C bond formation by oxidative cyclization, β‐hydride elimination, and C? H bond reductive elimination. This Ru^II/Ru^IV pathway is consistent with the observed catalytic reactivity of 1 a for mild tail‐to‐tail methyl acrylate dimerization and for cyclobutene formation by [2+2] norbornene/alkyne cycloaddition.     

Classical‐Reaction‐Driven Stereo‐ and Regioselective C(sp3)–H Functionalization of Aliphatic Amines

A large variety of synthetic methods have been developed for the synthesis of functionalized aliphatic amines because of their broad spectrum of application. Metallic reagents/catalysts and/or toxic oxidants are involved in most of the cases. Direct C? H functionalization of aliphatic amines via their classical condensation reactions with suitable carbonyl compounds is advantageous because this method avoids hazardous metallic reagents, toxic oxidants and pre‐activation/pre‐functionalization step(s). In this account, the concept of direct C? H functionalization of aliphatic amines based on the classical condensation–isomerization–addition (CIA) strategy followed by recent contributions from our ongoing research in the field along with relevant examples from other groups are described. Successes in stereo‐ and regioselective C? C and C? O bond formation via direct α‐ as well as β‐C(sp³)–H functionalization are discussed.