β‐Diketiminate‐Stabilized Magnesium(I) Dimers and Magnesium(II) Hydride Complexes: Synthesis,Characterization, Adduct Formation,and Reactivity Studies

The preparation and characterization of a series of magnesium(II) iodide complexes incorporating β‐diketiminate ligands of varying steric bulk and denticity, namely, [(ArNCMe)₂CH]^? (Ar=phenyl, (^PhNacnac), mesityl (^MesNacnac), or 2,6‐diisopropylphenyl (Dipp, ^DippNacnac)), [(DippNCtBu)₂CH]^? (^tBuNacnac), and [(DippNCMe)(Me₂NCH₂CH₂NCMe)CH]^? (^DmedaNacnac) are reported. The complexes [(^PhNacnac)MgI(OEt₂)], [(^MesNacnac)MgI(OEt₂)], [(^DmedaNacnac)MgI(OEt₂)], [(^MesNacnac)MgI(thf)], [(^DippNacnac)MgI(thf)], [(^tBuNacnac)MgI], and [(^tBuNacnac)MgI(DMAP)] (DMAP=4‐dimethylaminopyridine) were shown to be monomeric by X‐ray crystallography. In addition, the related β‐diketiminato beryllium and calcium iodide complexes, [(^MesNacnac)BeI] and [{(^DippNacnac)CaI(OEt₂)}₂] were prepared and crystallographically characterized. The reductions of all metal(II) iodide complexes by using various reagents were attempted. In two cases these reactions led to the magnesium(I) dimers, [(^MesNacnac)MgMg(^MesNacnac)] and [(^tBuNacnac)MgMg(^tBuNacnac)]. The reduction of a 1:1 mixture of [(^DippNacnac)MgI(OEt₂)] and [(^MesNacnac)MgI(OEt₂)] with potassium gave a low yield of the crystallographically characterized complex [(^DippNacnac)Mg(μ‐H)(μ‐I)Mg(^MesNacnac)]. All attempts to form beryllium(I) or calcium(I) dimers by reductions of [(^MesNacnac)BeI], [{(^DippNacnac)CaI(OEt₂)}₂], or [{(^tBuNacnac)CaI(thf)}₂] have so far been unsuccessful. The further reactivity of the magnesium(I) complexes [(^MesNacnac)MgMg(^MesNacnac)] and [(^tBuNacnac)MgMg(^tBuNacnac)] towards a variety of Lewis bases and unsaturated organic substrates was explored. These studies led to the complexes [(^MesNacnac)Mg(L)Mg(L)(^MesNacnac)] (L=THF or DMAP), [(^MesNacnac)Mg(μ‐AdN₆Ad)Mg(^MesNacnac)] (Ad=1‐adamantyl), [(^tBuNacnac)Mg(μ‐AdN₆Ad)Mg(^tBuNacnac)], and [(^MesNacnac)Mg(μ‐tBu₂N₂C₂O₂)Mg(^MesNacnac)] and revealed that, in general, the reactivity of the magnesium(I) dimers is inversely proportional to their steric bulk. The preparation and characterization of [(^tBuNacnac)Mg(μ‐H)₂Mg(^tBuNacnac)] has shown the compound to have different structural and physical properties to [(^tBuNacnac)MgMg(^tBuNacnac)]. Treatment of the former with DMAP has given [(^tBuNacnac)Mg(H)(DMAP)], the X‐ray crystal structure of which disclosed it to be the first structurally authenticated terminal magnesium hydride complex. Although attempts to prepare [(^MesNacnac)Mg(μ‐H)₂Mg(^MesNacnac)] were not successful, a neutron diffraction study of the corresponding magnesium(I) complex, [(^MesNacnac)MgMg(^MesNacnac)] confirmed that the compound is devoid of hydride ligands.     

Synthesis and Characterization of a Magnesium Boryl and a Beryllium‐Substituted Diazaborole

Reaction of a lithium boryl, [(THF)₂Li{B(DAB)}] (DAB=[(DipNCH)₂]^2?, Dip=2,6‐diisopropylphenyl), with a dinuclear magnesium(I) compound [{(^MesNacnac)Mg}₂] (^MesNacnac=[HC(MeCNMes)₂]^?, Mes=mesityl) unexpectedly afforded a rare example of a terminal magnesium boryl species, [(^MesNacnac)(THF)Mg{B(DAB)}]. Attempts to prepare the magnesium boryl via a salt metathesis reaction between the lithium boryl and a β‐diketiminato magnesium iodide compound, instead led to an intractable mixture of products. Similarly, reaction of the lithium boryl with a β‐diketiminato beryllium bromide precursor, [(^DepNacnac)BeBr] (Dep=2,6‐diethylphenyl) did not give a beryllium boryl, but instead afforded an unprecedented example of a beryllium substituted diazaborole heterocycle, [{(^DepNacnac)Be(4‐DAB^?H)}BBr]. For sake of comparison, the same group 2 halide precursor compounds were treated with a potassium gallyl analogue of the lithium boryl, viz. [(tmeda)K{:Ga(DAB)}] (tmeda=N,N,N’,N’‐tetramethylethylenediamine), but no reactions were observed.     

Activation of Ethylene by N-Heterocyclic Carbene Coordinated Magnesium(I) Compounds

Reactions of a series of magnesium(I) compounds with ethylene, in the presence of an N-heterocyclic carbene (NHC), have been explored. Treating [{(^MesNacnac)Mg}₂] (^MesNacnac=[HC(MeCNMes)₂]⁻, Mes=mesityl) with an excess of ethylene in the presence of two equivalents of :C{(MeNCMe)₂} (TMC) leads to the formal reductive coupling of ethylene, and formation of the 1,2-dimagnesiobutane complex, [{(^MesNacnac)(TMC)Mg}₂(μ-C₄H₈)]. In contrast, when the reaction is repeated in the presence of three equivalents of TMC, a mixture of the β-diketiminato magnesium ethyl, [(^MesNacnac)(TMC)MgEt], and the NHC coordinated magnesium diamide, [(^MesNacnac^-H)Mg(TMC)₂], results. Four related products, [(^ArNacnac)(TMC)MgEt] (Ar=2,6-dimethylphenyl (Xyl) or 2,6-diisopropylphenyl (Dip)) and [(^ArNacnac^-H)Mg(TMC)₂] (Ar=Xyl or Dip), were similarly synthesised and crystallographically characterized. Computational studies have been employed to investigate the mechanisms of the two observed reaction types, which appear dependent on the substitution pattern of the magnesium(I) compound, and the stoichiometric equivalents of TMC used in the reactions.     

The Mechanism of CO2 Insertion into Iridium(I) Hydroxide and Alkoxide Bonds: A Kinetics and Computational Study

The facile insertion of CO₂ into iridium(I) hydroxide, alkoxide, and amide bonds was recently reported. In particular, [Ir(cod)(IiPr)(OH)] (IiPr=1,3‐bis(isopropyl)imidazol‐2‐ylidene) reacted with CO₂ in solution and in the solid state in a matter of minutes to give the novel [{Ir(cod)(IiPr)}₂(μ‐κ¹O:κ²O,O‐CO₃)] complex. In the present study, this reaction is probed using kinetics and theoretical studies, which enabled us to analyse its facile nature and to fully elucidate the reaction mechanism with excellent correlation between the two methods.     

Activation of SO2 and CO2 by Trivalent Uranium Leading to Sulfite/Dithionite and Carbonate/Oxalate Complexes

The first sulfite [{((^nP,MeArO)₃tacn)U^IV}₂(μ‐κ¹:κ²‐SO₃)] (tacn=triazacyclononane) and dithionite [{((^nP,MeArO)₃tacn)U^IV}₂(μ‐κ²:κ²‐S₂O₄)] complexes of uranium from reaction with gaseous SO₂ have been prepared. Additionally, the reductive activation of CO₂ was investigated with respect to the rare oxalate [{((^nP,MeArO)₃tacn)U^IV}₂(μ‐κ²:κ²‐C₂O₄)] formation. This ultimately provides the unique S₂O₄^2?/C₂O₄^2? and SO₃^2?/CO₃^2? complex pairs. All new complexes were characterized by a combination of single‐crystal X‐ray diffraction, elemental analysis, UV/Vis/NIR electronic absorption, IR vibrational, and ¹H NMR spectroscopy, as well as magnetization (VT SQUID) studies. Moreover, density functional theory (DFT) calculations were carried out to gain further insight into the reaction mechanisms. All observations, together with DFT, support the assumption that SO₂ and CO₂ show similar (dithionite/oxalate) to analogous (sulfite/carbonate) activation behavior with uranium complexes.     

Sterically controlled reductive oligomerisations of CO by activated magnesium(i) compounds: deltate vs. ethenediolate formation

An extremely bulky, symmetrical three-coordinate magnesium(i) complex, [{(^TCHPNacnac)Mg}₂] (^TCHPNacnac = [{(TCHP)NCMe}₂CH]⁻, TCHP = 2,4,6-tricyclohexylphenyl) has been prepared and shown to have an extremely long Mg–Mg bond (3.021(1) Å) for such a complex. It was shown not to react with either DMAP (4-dimethylaminopyridine) or CO. Three unsymmetrical 1 : 1 DMAP adducts of less bulky Mg–Mg bonded species have been prepared, viz. [(^ArNacnac)Mg–Mg(DMAP)(^ArNacnac)] (^ArNacnac = [(ArNCMe)₂CH]⁻ Ar = 2,6-xylyl (Xyl), mesityl (Mes) or 2,6-diethylphenyl (Dep)), and their reactivity toward CO explored. Like the previously reported bulkier complex, [(^DipNacnac)Mg–Mg(DMAP)(^DipNacnac)] (Dip = 2,6-diisopropylphenyl), [(^DepNacnac)Mg–Mg(DMAP)(^DepNacnac)] reductively trimerises CO to give a rare example of a deltate complex, [{(^DepNacnac)Mg(μ-C₃O₃)Mg(DMAP)(^DepNacnac)}₂]. In contrast, the two smaller adduct complexes react with only two CO molecules, ultimately giving unusual ethenediolate complexes [{(^ArNacnac)Mg{μ-OC(H) C(DMAP^−H)O}Mg(^ArNacnac)}₂] (Ar = Xyl or Mes). DFT calculations show the latter reactions to proceed via reductive dimerizations of CO, and subsequent intramolecular C–H activation of Mg-ligated DMAP by “zig–zag” [C₂O₂]²⁻ fragments of reaction intermediates. Calculations also suggest that magnesium deltate complexes are kinetic products in these reactions, while the magnesium ethenediolates are thermodynamic products. This study shows that subtle changes to the bulk of the reacting 1 : 1 DMAP–magnesium(i) adduct complexes can lead to fine steric control over the products arising from their CO reductive oligomerisations. Furthermore, it is found that the more activated nature of the adduct complexes, relative to their symmetrical, three-coordinate counterparts, [{(^ArNacnac)Mg}₂], likely derives more from the polarisation of the Mg–Mg bonds of the former, than the elongated nature of those bonds.

Subtle changes to the bulk of 1 : 1 adducts of DMAP with magnesium(i) complexes leads to steric control over the products arising from their reductive oligomerisations of carbon monoxide.      

A Dimetalloxycarbene Bonding Mode and Reductive Coupling Mechanism for Oxalate Formation from CO2

We describe the stable and isolable dimetalloxycarbene [(TiX₃)₂(μ₂‐CO₂‐κ²C,O:κO′)] 5 , where X=N‐(tert‐butyl)‐3,5‐dimethylanilide, which is stabilized by fluctuating μ₂‐κ²C,O:κ¹O′ coordination of the carbene carbon to both titanium centers of the dinuclear complex 5 , as shown by variable‐temperature NMR studies. Quantum chemical calculations on the unmodified molecule indicated a higher energy of only +10.5 kJ mol^?1 for the μ₂‐κ¹O:κ¹O′ bonding mode of the free dimetalloxycarbene compared to the μ₂‐κ²C,O:κ¹O′ bonding mode of the masked dimetalloxycarbene. The parent cationic bridging formate complex [(TiX₃)₂(μ₂‐OCHO‐κO:κO′)][B(C₆F₅)₄], 4 [B(C₆F₅)₄], was simply deprotonated with the strong base K(N(SiMe₃)₂) to give 5 . Complex 5 reacts smoothly with CO₂ to generate the bridging oxalate complex [(TiX₃)₂(μ₂‐C₂O₄‐κO:κO′′)], 6 , in a C? C bond formation reaction commonly anticipated for oxalate formation by reductive coupling of CO₂ on low‐valent transition‐metal complexes.     

Shielding of Electron Acceptors Coordinated to Rhenium(I) by Carboxylato Groups. Intraligand and Charge‐Transfer Excited‐State Properties of fac‐(‘Anthraquinone‐2‐carboxylato')(2,2′‐bipyridine)tricarbonylrhenium (fac‐[ReI(aq‐2‐CO2)(2,2′‐bipy)(CO)3])

The photophysical and photochemical properties of (OC‐6‐33)‐(2,2′‐bipyridine‐κN¹,κN¹′)tricarbonyl(9,10‐dihydro‐9,10‐dioxoanthracene‐2‐carboxylato‐κO)rhenium (fac‐[Re^I(aq‐2‐CO₂)(2,2′‐bipy)(CO)₃]) were investigated and compared to those of the free ligand 9,10‐dihydro‐9,10‐dioxoanthracene‐2‐carboxylate (=anthraquinone‐2‐carboxylate) and other carboxylato complexes containing the (2,2′‐bipyridine)tricarbonylrhenium ([Re(2,2′‐bipy)(CO)₃]) moiety. Flash and steady‐state irradiations of the anthraquinone‐derived ligand (λ_exc 337 or 351 nm) and of its complex reveal that the photophysics of the latter is dominated by processes initiated in the Re‐to‐(2,2′‐bipyridine) charge‐transfer excited state and 2,2′‐bipyridine‐ and (anthraquinone‐2‐carboxylato)‐centered intraligand excited states. In the reductive quenching by N,N‐diethylethanamine (TEA) or 2,2′,2″‐nitrilotris[ethanol] TEOA, the reactive states are the 2,2′‐bipyridine‐centered and/or the charge‐transfer excited states. The species with a reduced anthraquinone moiety is formed by the following intramolecular electron transfer, after the redox quenching of the excited state: [Re^I(aq−2−CO₂)(2,2′‐bipy^.)(CO)₃]⁻⇌[Re^I(aq−2−CO₂^.)(2,2′‐bipy)(CO)₃]⁻ The photophysics, particularly the absence of a Re^I‐to‐anthraquinone charge‐transfer excited state photochemistry, is discussed in terms of the electrochemical and photochemical results.     

Synthesis and Reactivity of Cationic Triruthenium Clusters Derived from 2‐Methyl‐ and 4‐Methylpyrimidines: From Conventional Cyclometalated Ligands to Novel Types of N‐Heterocyclic Carbenes

The methylation of the uncoordinated nitrogen atom of the cyclometalated triruthenium cluster complexes [Ru₃(μ‐H)(μ‐κ²N¹,C⁶‐2‐Mepyr)(CO)₁₀] ( 1 ; 2‐MepyrH=2‐methylpyrimidine) and [Ru₃(μ‐H)(μ‐κ²N¹,C⁶‐4‐Mepyr)(CO)₁₀] ( 9 ; 4‐MepyrH=4‐methylpyrimidine) gives two similar cationic complexes, [Ru₃(μ‐H)(μ‐κ²N¹,C⁶‐2,3‐Me₂pyr)(CO)₁₀]⁺( 2 ⁺) and [Ru₃(μ‐H)(μ‐κ²N¹,C⁶‐3,4‐Me₂pyr)(CO)₁₀]⁺ ( 9 ⁺), respectively, whose heterocyclic ligands belong to a novel type of N‐heterocyclic carbenes (NHCs) that have the C_carbene atom in 6‐position of a pyrimidine framework. The position of the C‐methyl group in the ligands of complexes 2 ⁺ (on C²) and 9 ⁺ (on C⁴) is of key importance for the outcome of their reactions with K[N(SiMe₃)₂], K‐selectride, and cobaltocene. Although these reagents react with 2 ⁺ to give [Ru₃(μ‐H)(μ‐κ²N¹,C⁶‐2‐CH₂‐3‐Mepyr)(CO)₁₀] ( 3 ; deprotonation of the C²‐Me group), [Ru₃(μ‐H)(μ₃‐κ³N¹,C⁵,C⁶‐4‐H‐2,3‐Me₂pyr)(CO)₉] ( 4 ; hydride addition at C⁴), and [Ru₆(μ‐H)₂{μ₆‐κ⁶N¹,N^1′,C⁵,C^5′,C⁶,C^6′‐4,4′‐bis(2,3‐Me₂pyr)}(CO)₁₈] ( 5 ; reductive dimerization at C⁴), respectively, similar reactions with 9 ⁺ have only allowed the isolation of [Ru₃(μ‐H)(μ₃‐κ²N¹,C⁶‐2‐H‐3,4‐Me₂pyr)(CO)₉] ( 11 ; hydride addition at C²). Compounds 3 and 11 also contain novel six‐membered ring NHC ligands. Theoretical studies have established that the deprotonation of 2 ⁺ and 9 ⁺ (that have ligand‐based LUMOs) are charge‐controlled processes and that both the composition of the LUMOs of these cationic complexes and the steric protection of their ligand ring atoms govern the regioselectivity of their nucleophilic addition and reduction reactions.     

A new double‐cube nitride complex containing titanium and potassium

The reaction of the imide–nitride complex [{Ti(η⁵‐C₅Me₅)(μ‐NH)}₃(μ₃‐N)] with potassium iodide in pyridine at room temperature affords the adduct di‐μ‐iodido‐1:1′κ⁴I‐bis{tri‐μ₃‐imido‐1:2:3κ³N;1:2:4κ³N;1:3:4κ³N‐μ₃‐nitrido‐2:3:4κ³N‐tris[2,3,4(η⁵)‐pentamethylcyclopentadienyl](pyridine‐1κN)‐tetrahedro‐potassiumtrititanium(IV)}, [K₂Ti₆(C₁₀H₁₅)₆I₂N₂(NH)₆(C₅H₅N)₂] or [(C₅H₅N)(μ‐I)K{(μ₃‐NH)₃Ti₃(η⁵‐C₅Me₅)₃(μ₃‐N)}]₂. The crystal structure contains two [KTi₃N₄] cube‐type units held together by two bridging I atoms. There is a centre of inversion located in the middle of this unprecedented discrete K₂I₂ unit. The geometry around K is best described as distorted trigonal prismatic, with three imide groups, two bridging I atoms and one pyridine ligand.     

Tetrylenes chelated by bifunctional β‐diketiminate ligand: structure and possible applications

The synthesis and structure of heteroleptic tetrylenes containing bifunctional β‐diketiminate ligand are reported. Compounds were prepared via a protolytic reaction of free β‐diketimine {N‐[(2‐MeO)C₆H₅]}N═C(Me)CH═C(Me)N(H){N′‐[(2‐MeO)C₆H₅]} (L^COH) and {N‐[(2‐MeO)C₆H₅]}N?CHCH?CHN(H){N′‐[(2‐MeO)C₆H₅]} (L^HOH), respectively, with corresponding bis(amide) – M[N(SiMe₃)₂]₂ (M = Ge, Sn, Pb) – in equimolar ratio or via the salt elimination route from lithium precursors generated from L^HOH/L^COH species and slight excess of SnCl₂ or GeCl₂.dioxane complex. Only heteroleptic complexes were obtained by the mentioned methods. Products were characterized by multinuclear NMR spectroscopy techniques and structures of four of them have been determined by X‐ray diffraction methods. Complexes L^HOGeCl and L^COSnN(SiMe₃)₂ crystallize as monomers with the three‐coordinated metal centres by one chloro or amido ligand and one bidentate β‐diketiminato unit, in contrast to the structure of L^COSnCl, which reveals a dimeric character and compound L^COPbN(SiMe₃)₂, where the central atom of lead is five‐coordinated by methoxy groups of the ligand. Complex L^COSnN(SiMe₃)₂ was tested as a catalyst for polymerization of various epoxides_. Copyright © 2014 John Wiley & Sons, Ltd.     

Structural Diversity of Calcium Organocuprates(I): Synthesis of Mesityl Cuprates via Addition and Transmetalation Reactions of Mesityl Copper(I)

The addition of [(L)₄Ca(I)Mes] (Lewis base L=thf, Et₂O) to mesityl copper(I) and the transmetalation reaction of mesityl copper(I) with activated calcium are suitable pathways for the synthesis of dimesityl cuprates(I) of calcium. However, the structures of the calcium cuprates(I) depend on the preparative procedure. The transmetalation reaction leads to the formation of [Mes‐Cu‐Mes]^? anions whereas the addition yields dinuclear [(Mes‐Cu)₂(μ‐Mes)]^? anions. The solvent‐separated counterions are [Ca(thf)₆]²⁺ and [(thf)₅CaI]⁺, respectively. In contrast to these findings, the addition of [(L)₄Ca(I)Mes] to mesityl copper(I) in an Et₂O/toluene mixture led to formation of tetrameric solvent‐free iodocalcium dimesityl cuprate(I) [ICa(μ‐η¹,η⁶‐Mes₂Cu)]₄, representing a rare example of a heavy Normant‐type organocuprate.     

Tetrameric indium trichloride,a new modification of a widely used compound

The title compound, hexa‐μ‐chloro‐1:2κ⁴Cl;2:3κ⁴Cl;3:4κ⁴Cl‐hexachloro‐1κ²Cl,2κCl,3κCl,4κ²Cl‐hexakis­(diethyl­amine)‐1κ²N,2κN,3κN,4κ²N‐tetraindium(III), [(InCl₃)₄(Et₂NH)₆] or [In₄Cl₁₂(C₄H₁₁N)₆], lies about an inversion centre and consists of four octahedrally coordinated In centres linked by bridging Cl atoms to form three four‐membered In₂Cl₂ rings.     

Two‐Coordinate Magnesium(I) Dimers Stabilized by Super Bulky Amido Ligands

A variety of very bulky amido magnesium iodide complexes, LMgI(solvent)_0/1 and [LMg(μ‐I)(solvent)_0/1]₂ (L=‐N(Ar)(SiR₃); Ar=C₆H₂{C(H)Ph₂}₂R′‐2,6,4; R=Me, Prⁱ, Ph, or OBu^t; R′=Prⁱ or Me) have been prepared by three synthetic routes. Structurally characterized examples of these materials include the first unsolvated amido magnesium halide complexes, such as [LMg(μ‐I)]₂ (R=Me, R′=Prⁱ). Reductions of several such complexes with KC₈ in the absence of coordinating solvents have afforded the first two‐coordinate magnesium(I) dimers, LMg?MgL (R=Me, Prⁱ or Ph; R′=Prⁱ, or Me), in low to good yields. Reductions of two of the precursor complexes in the presence of THF have given the related THF adduct complexes, L(THF)Mg?Mg(THF)L (R=Me; R′=Prⁱ) and LMg?Mg(THF)L (R=Prⁱ; R′=Me) in trace yields. The X‐ray crystal structures of all magnesium(I) complexes were obtained. DFT calculations on the unsolvated examples reveal their Mg?Mg bonds to be covalent and of high s‐character, while Ph???Mg bonding interactions in the compounds were found to be weak at best.     

Electrocatalytic reduction of carbon dioxide by a polymeric film of rhenium tricarbonyl dipyridylamine

A dipyridylamine ligand with a pendant pyrrole (N-(3-N,N′-bis(2-pyridyl)propylamino)pyrrole, PPP) and its corresponding rhenium(I) complex, Re(CO)₃(κ²-N,N-PPP)Cl, were synthesized. The structure of Re(CO)₃(κ²-N,N-PPP)Cl was determined by X-ray crystallography. Electrochemical polymerization of the pyrrole moiety resulted in the immobilization of poly[Re(CO)₃(κ²-N,N-PPP)Cl] film onto a glassy carbon electrode, which exhibited electrocatalytic activity for the reduction of CO₂ to CO.     

Mapping the Transformation [{RuII(CO)3Cl2}2]→[RuI2(CO)4]2+: Implications in Binuclear Water–Gas Shift Chemistry

The complete sequence of reactions in the base‐promoted reduction of [{Ru^II(CO)₃Cl₂}₂] to [Ru^I₂(CO)₄]²⁺ has been unraveled. Several μ‐OH, μ:κ²‐CO₂H‐bridged diruthenium(II) complexes have been synthesized; they are the direct results of the nucleophilic activation of metal‐coordinated carbonyls by hydroxides. The isolated compounds are [Ru₂(CO)₄(μ:κ²‐C,O‐CO₂H)₂(μ‐OH)(NP^F‐Am)₂][PF₆] ( 1 ; NP^F‐Am=2‐amino‐5,7‐trifluoromethyl‐1,8‐naphthyridine) and [Ru₂(CO)₄(μ:κ²‐C,O‐CO₂H)(μ‐OH)(NP‐Me₂)₂][BF₄]₂ ( 2 ), secured by the applications of naphthyridine derivatives. In the absence of any capping ligand, a tetranuclear complex [Ru₄(CO)₈(H₂O)₂(μ³‐OH)₂(μ:κ²‐C,O‐CO₂H)₄][CF₃SO₃]₂ ( 3 ) is isolated. The bridging hydroxido ligand in 1 is readily replaced by a π‐donor chlorido ligand, which results in [Ru₂(CO)₄(μ:κ²‐C,O‐CO₂H)₂(μ‐Cl)(NP‐PhOMe)₂][BF₄] ( 4 ). The production of [Ru₂(CO)₄]²⁺ has been attributed to the thermally induced decarboxylation of a bis(hydroxycarbonyl)–diruthenium(II) complex to a dihydrido–diruthenium(II) species, followed by dinuclear reductive elimination of molecular hydrogen with the concomitant formation of the Ru^I? Ru^I single bond. This work was originally instituted to find a reliable synthetic protocol for the [Ru₂(CO)₄(CH₃CN)₆]²⁺ precursor. It is herein prescribed that at least four equivalents of base, complete removal of chlorido ligands by Tl^I salts, and heating at reflux in acetonitrile for a period of four hours are the conditions for the optimal conversion. Premature quenching of the reaction resulted in the isolation of a trinuclear Ru^I₂Ru^II complex [{Ru(NP‐Am)₂(CO)}{Ru₂(NP‐Am)₂(CO)₂(μ‐CO)₂}(μ₃:κ³‐C,O,O′‐CO₂)][BF₄]₂ ( 6 ). These unprecedented diruthenium compounds are the dinuclear congeners of the water–gas shift (WGS) intermediates. The possibility of a dinuclear pathway eliminates the inherent contradiction of pH demands in the WGS catalytic cycle in an alkaline medium. A cooperative binuclear elimination could be a viable route for hydrogen production in WGS chemistry.     

3‐Rhoda‐1,2‐diazacyclopentanes: A Series of Novel Metallacycle Complexes Derived From CN Functionalization of Ethylene

Rh‐containing metallacycles, [(TPA)Rh^III(κ²‐(C,N)‐CH₂CH₂(NR)₂‐]Cl; TPA=N,N,N,N‐tris(2‐pyridylmethyl)amine have been accessed through treatment of the Rh^I ethylene complex, [(TPA)Rh(η²‐CH₂CH₂)]Cl ([ 1 ]Cl) with substituted diazenes. We show this methodology to be tolerant of electron‐deficient azo compounds including azo diesters (RCO₂N?NCO₂R; R=Et [ 3 ]Cl, R=iPr [ 4 ]Cl, R=tBu [ 5 ]Cl, and R=Bn [ 6 ]Cl) and a cyclic azo diamide: 4‐phenyl‐1,2,4‐triazole‐3,5‐dione (PTAD), [ 7 ]Cl. The latter complex features two ortho‐fused ring systems and constitutes the first 3‐rhoda‐1,2‐diazabicyclo[3.3.0]octane. Preliminary evidence suggests that these complexes result from N–N coordination followed by insertion of ethylene into a [Rh]?N bond. In terms of reactivity, [ 3 ]Cl and [ 4 ]Cl successfully undergo ring‐opening using p‐toluenesulfonic acid, affording the Rh chlorides, [(TPA)Rh^III(Cl)(κ¹‐(C)‐CH₂CH₂(NCO₂R)(NHCO₂R)]OTs; [ 13 ]OTs and [ 14 ]OTs. Deprotection of [ 5 ]Cl using trifluoroacetic acid was also found to give an ethyl substituted, end‐on coordinated diazene [(TPA)Rh^III(κ²‐(C,N)‐CH₂CH₂(NH)₂‐]⁺ [ 16 ]Cl, a hitherto unreported motif. Treatment of [ 16 ]Cl with acetyl chloride resulted in the bisacetylated adduct [(TPA)Rh^III(κ²‐(C,N)‐CH₂CH₂(NAc)₂‐]⁺, [ 17 ]Cl. Treatment of [ 1 ]Cl with AcN?NAc did not give the Rh?N insertion product, but instead the N,O‐chelated complex [(TPA)Rh^I ( κ²‐(O,N)‐CH₃(CO)(NH)(N?C(CH₃)(OCH?CH₂))]Cl [ 23 ]Cl, presumably through insertion of ethylene into a [Rh]?O bond.     

Bis­(di‐μ‐acetato‐aqua{2‐[N‐ethyl‐N‐(2‐hydroxy‐4‐methyl­benzyl)­amino­methyl]‐1‐methyl­benz­imid­az­ole}­nickel)­nickel(II) tetra­hy­drate

The previously unknown title compound, tetra‐μ‐ace­tato‐1:2κ²O;1:2κ²O:O′;­2:3κ²O;­2:3κ²O:O′‐di­aqua‐1κO,3κO‐bis­(μ‐2‐{[N‐ethyl‐N‐(2‐hy­droxy‐5‐methylbenzyl)­am­ino]­methyl}‐1‐methyl‐1H‐benz­imid­az­ole)‐1κ³N³,N,O:2κO;3κ³N³,N,O:2κO‐tri­nickel(II) tetra­hy­drate, [Ni₃(C₁₈H₂₂N₃O)₂(C₂H₃O₂)₄(H₂O)₂]·­4H₂O, (I), is a centrosymmetric linear trinuclear nickel(II) complex, where the Ni atoms are in an octahedral coordination and the ligand heteroatoms act so as to model amino acid residues.     

First heterobimetallic AgI–CoIII coordination compound with both bridging and terminal –NO2 coordination modes: synthesis,characterization, structural and computational studies of (PPh3)2AgI–(μ‐κ2O,O′:κN‐NO2)–CoIII(DMGH)2(κN‐NO2)

An unusual heterobimetallic bis(triphenylphosphane)(NO₂)Ag^I–Co^III(dimethylglyoximate)(NO₂) coordination compound with both bridging and terminal –NO₂ (nitro) coordination modes has been isolated and characterized from the reaction of [CoCl(DMGH)₂(PPh₃)] (DMGH₂ is dimethylglyoxime or N,N′‐dihydroxybutane‐2,3‐diimine) with excess AgNO₂. In the title compound, namely bis(dimethylglyoximato‐1κ²O,O′)(μ‐nitro‐1κN:2κ²O,O′)(nitro‐1κN)bis(triphenylphosphane‐2κP)cobalt(III)silver(I), [AgCo(C₄H₇N₂O₂)₂(NO₂)₂(C₁₈H₁₅P)₂], one of the ambidentate –NO₂ ligands, in a bridging mode, chelates the Ag^I atom in an isobidentate κ²O,O′‐manner and its N atom is coordinated to the Co^III atom. The other –NO₂ ligand is terminally κN‐coordinated to the Co^III atom. The structure has been fully characterized by X‐ray crystallography and spectroscopic methods. Density functional theory (DFT) and time‐dependent density functional theory (TD‐DFT) have been used to study the ground‐state electronic structure and elucidate the origin of the electronic transitions, respectively.     

Concomitant Carboxylate and Oxalate Formation From the Activation of CO2 by a Thorium(III) Complex

Improving our comprehension of diverse CO₂ activation pathways is of vital importance for the widespread future utilization of this abundant greenhouse gas. CO₂ activation by uranium(III) complexes is now relatively well understood, with oxo/carbonate formation predominating as CO₂ is readily reduced to CO, but isolated thorium(III) CO₂ activation is unprecedented. We show that the thorium(III) complex, [Th(Cp′′)₃] ( 1 , Cp′′={C₅H₃(SiMe₃)₂‐1,3}), reacts with CO₂ to give the mixed oxalate‐carboxylate thorium(IV) complex [{Th(Cp′′)₂[κ²‐O₂C{C₅H₃‐3,3′‐(SiMe₃)₂}]}₂(μ‐κ²:κ²‐C₂O₄)] ( 3 ). The concomitant formation of oxalate and carboxylate is unique for CO₂ activation, as in previous examples either reduction or insertion is favored to yield a single product. Therefore, thorium(III) CO₂ activation can differ from better understood uranium(III) chemistry.