Synthesis of Aryldiazoacetates through Palladium(0)‐Catalyzed Deacylative Cross‐Coupling of Aryl Iodides with Acyldiazoacetates

Palladium(0)‐catalyzed deacylative cross‐coupling of aryl iodides and acyldiazocarbonyl compounds can be achieved at room temperature under mild reaction conditions. The coupling reaction represents a highly efficient and general method for the synthesis of aryldiazocarbonyl compounds, which have found wide and increasing applications as precursors for generating donor/acceptor‐substituted metallocarbenes.     

Synthesis of End‐Functionalized Polyacetylenes that Contain Polar Groups by Employing Well‐Defined Palladium Catalysts

A series of [(dppf)PdBr(R)]‐type complexes (dppf=1,1′‐bis(diphenylphosphino)ferrocene; R=p‐cyanophenyl ( 1 a ), o‐hydroxymethylphenyl ( 1 b ), and triphenylvinyl ( 1 c )), in combination with silver trifluoromethanesulfonate (AgOTf), were demonstrated to be active for the polymerization of monosubstituted polar acetylene monomers HC?CCONHC₄H₉ ( 2 ), HC?CCO₂C₈H₁₇ ( 3 ), HC?CCH₂OCONHC₆H₁₃ ( 4 ), HC?CCH₂OCO₂C₆H₁₃ ( 5 ), and HC?CCH(CH₃)OH ( 6 ). The yields and molecular weights of the polymers depended on the combination of the Pd catalyst and monomer that was employed. Matrix‐assisted laser‐desorption/ionization–time of flight (MALDI‐TOF) mass spectrometric analysis indicated the formation of polymers that contained the “R” and “H” groups at the chain ends. IR spectroscopic analysis supported the R‐end‐functionalization of the polymers. NMR spectroscopy and MS identified the presence of species that were formed by single, double, and triple insertion of the monomers into the Pd‐C₆H₄‐p‐CN bond, thereby giving solid evidence for an insertion mechanism for the present system. Density functional theory (DFT) calculations suggested the preference for 1,2‐insertion of the monomer compared to 2,1‐insertion.     

Six‐ and Eightfold Palladium‐Catalyzed Cross‐Coupling Reactions of Hexa‐ and Octabromoarenes

Palladium‐catalyzed sixfold coupling of hexabromobenzene ( 20 ) with a variety of alkenylboronates and alkenylstannanes provided hexaalkenylbenzenes 1 in up to 73 % and 16 to 41 % yields, respectively. In some cases pentaalkenylbenzenes 21 were isolated as the main products (up to 75 %). Some functionally substituted hexaalkenylbenzene derivatives containing oxygen or sulfur atoms in each of their six arms have also been prepared (16 to 24 % yield). The sixfold coupling of the less sterically encumbered 2,3,6,7,10,11‐hexabromotriphenylene ( 24 ) gave the desired hexakis(3,3‐dimethyl‐1‐butenyl)triphenylene ( 25 ) in 93 % yield. The first successful cross‐coupling reaction of octabromonaphthalene ( 26 ) gave octakis‐(3,3‐dimethyl‐1‐butenyl)naphthalene ( 27 ) in 21 % yield. Crystal structure analyses disclose that, depending on the nature of the substituents, the six arms are positioned either all on the same side of the central benzene ring as in 1 a and 1 i , making them nicely cup‐shaped molecules, or alternatingly above and below the central plane as in 1 h and 23 . In 27 , the four arms at C‐1,4,6,7 are down, while the others are up, or vice versa. Upon catalytic hydrogenation, 1 a yielded 89 % of hexakis(tert‐butylethyl)benzene ( 23 ). Some efficient accesses to alkynes with sterically demanding substituents are also described. Elimination of phosphoric acid from the enol phosphate derived from the corresponding methyl ketones gave 1‐ethynyladamantane ( 3 b , 62 % yield), 1‐ethynyl‐1‐methylcyclohexane ( 3 c , 85 %) and 3,3‐dimethylpentyne ( 3 e , 65 %). 1‐(Trimethylsilyl)ethynylcyclopropane ( 7 ) was used to prepare 1‐ethynyl‐1‐methylcyclopropane ( 3 d ) (two steps, 64 % overall yield). The functionally substituted alkynes 3 f – h were synthesized in multistep sequences starting from the propargyl chloride 11 , which was prepared in high yields from the dimethylpropargyl alcohol 10 (94 %). The alkenylstannanes 19 were prepared by hydrostannation of the corresponding alkynes in moderate to high yields (42–97 %), and the alkenylboronates 2 and 4 by hydroboration with catecholborane (27–96 % yield) or pinacolborane (26–69 % yield).     

Pd‐Catalyzed Synthesis of α‐Aryl Vinylphosphonates via Suzuki Arylation of α‐Phosphonovinyl Nonaflates

The first palladium‐catalyzed method for the arylation of α‐phosphonovinyl nonaflates is described. Using a catalyst comprised of Pd(OAc)₂ and SPhos, terminal and internal α‐aryl vinylphosphonates could be efficiently accessed under mild conditions. The reaction features a broad coupling partner scope and tolerates many functional groups.     

一种经(E)-α-碘代烯基砜的钯催化交叉偶联反应立体选择合成(1Z,3E)-2-芳砜基取代的1,3-二烯的新方法

（E）-α-Stannylvinyl phenyl（or p-tolyl）sulfones underwent an iododestannylation reaction to afford （E）-α-iodovinyl phenyl（or p-tolyl）sulfones 1, which reacted with （E）-alkenylzirconium（IV） complexes 2 produced in situ by hydrozirconation of terminal alkynes in the presence of a Pd（PPh3）4 catalyst to afford stereoselectively （1Z,3E）-2- phenyl（or p-tolyl）sulfonyl-substituted 1,3-dienes 3 in good yields.     

Palladium(0)‐Catalyzed Cross‐Coupling of Potassium (Z)‐2‐Chloroalk‐1‐enyl Trifluoroborates: A Chemo‐ and Stereoselective Access to (Z)‐Chloroolefins and Trisubstituted Alkenes

Original and ambivalent : We describe the preparation of a series of new potassium trifluoroborates 1 , and the study of their behaviour in a Pd⁰‐catalyzed cross‐coupling reaction. We found that compounds 1 are endowed with original properties as they behave as nucleophilic cross‐coupling partners chemoselectively, but also as ambivalent synthons. The usefulness of this methodology has been successfully illustrated by the first total synthesis of an N‐acyl spermidine.

     

Difunctionalized {closo‐1‐CB11} Clusters: 1‐ and 2‐Amino‐12‐ethynylcarba‐closo‐dodecaborates

Carba‐closo‐dodecaborate anions with two functional groups have been synthesized via a simple two‐step procedure starting from monoamino‐functionalized {closo‐1‐CB₁₁} clusters. Iodination at the antipodal boron atom provided access to [1‐H₂N‐12‐I‐closo‐1‐CB₁₁H₁₀]^? ( 1 a ) and [2‐H₂N‐12‐I‐closo‐1‐CB₁₁H₁₀]^? ( 2 a ), which have been transformed into the anions [1‐H₂N‐12‐RC?C‐closo‐1‐CB₁₁H₁₀]^? (R=H ( 1 b ), Ph ( 1 c ), Et₃Si ( 1 d )) and [2‐H₂N‐12‐RC?C‐closo‐1‐CB₁₁H₁₀]^? (R=H ( 2 b ), Ph ( 2 c ), Et₃Si ( 2 d )) by microwave‐assisted Kumada‐type cross‐coupling reactions. The syntheses of the inner salts 1‐Me₃N‐12‐RC?C‐closo‐1‐CB₁₁H₁₀ (R=H ( 1 e ), Et₃Si ( 1 f )) and 2‐Me₃N‐12‐RC?C‐closo‐1‐CB₁₁H₁₀ (R=H ( 2 e ), Et₃Si ( 2 f )) are the first examples for a further derivatization of the new anions. All {closo‐1‐CB₁₁} clusters have been characterized by multinuclear NMR and vibrational spectroscopy as well as by mass spectrometry. The crystal structures of Cs 1 a , [Et₄N] 2 a , K 1 b , [Et₄N] 1 c , [Et₄N] 2 c , 1 e , and [Et₄N][1‐H₂N‐2‐F‐12‐I‐closo‐1‐CB₁₁H₉]?0.5 H₂O ([Et₄N ]4 a ?0.5 H₂O) have been determined. Experimental spectroscopic data and especially spectroscopic data and bond properties derived from DFT calculations provide some information on the importance of inductive and resonance‐type effects for the transfer of electronic effects through the {closo‐1‐CB₁₁} cage.     

Synthesis of Tricyclic Fused 3‐Aminopyridines through Intramolecular CoI‐Catalyzed [2+2+2] Cycloaddition between Ynamides,Nitriles, and Alkynes

Three‐ring circus : An expedient route to tricyclic fused 2‐trimethylsilyl‐3‐aminopyridines exhibiting unprecedented skeletons is described. The key step is a very efficient cobalt‐catalyzed [2+2+2] cycloaddition of a polyunsaturated compound displaying an ynamide, an alkyne, and a nitrile functionality (see picture).

     

Synthesis of α,α‐Difluoromethylene Alkynes by Palladium‐Catalyzed gem‐Difluoropropargylation of Aryl and Alkenyl Boron Reagents

gem‐Difluoropropargyl bromides are versatile intermediates in organic synthesis, but have rarely been employed in transition‐metal‐catalyzed cross‐coupling reactions. The first palladium‐catalyzed gem‐difluoropropargylation of organoboron reagents with gem‐difluoropropargyl bromides is now reported. The reaction proceeds under mild reaction conditions with high regioselectivity; it features a broad substrate scope and excellent functional‐group compatibility and thus provides an attractive approach for the synthesis of complex fluorinated molecules, in particular for drug discovery and development.     

Efficient Diketopyrrolopyrrole‐Based Small‐Molecule Bulk‐Heterojunction Solar Cells with Different Electron‐Donating End‐Groups

A series of small molecules that contained identical π‐spacers (ethyne), a central diketopyrrolopyrrole (DPP) unit, and different aromatic electron‐donating end‐groups were synthesized and used in organic solar cells (OSCs) to study the effect of electron‐donating groups on the device performance. The three compounds, DPP‐A‐Ph , DPP‐A‐Na , and DPP‐A‐An , possessed intense absorption bands that covered a wide range, from 350 to 750 nm, and relatively low HOMO energy levels, from ?5.50 to ?5.55 eV. DPP‐A‐An , which contained anthracene end‐groups, demonstrated a stronger absorbance and a higher hole mobility than DPP‐A‐Ph , which contained phenyl groups, and DPP‐A‐Na , which contained naphthalene units. The power‐conversion efficiencies (PCEs) of OSCs based on organic:PC₇₁BM blends (1:1, w/w) with a processed DIO additive were 3.93 % for DPP‐A‐An , 3.02 % for DPP‐Na , and 2.26 % for DPP‐A‐Ph . These findings suggest that a DPP core that is functionalized with electron‐donating capping groups constitutes a promising new class of solution‐processable small molecules for OSC applications.     

Palladium‐Catalyzed Oxidative Difunctionalization of Alkenes with α‐Carbonyl Alkyl Bromides Initiated through a Heck‐type Insertion: A Route to Indolin‐2‐ones

The oxidative interception of various σ‐alkyl palladium(II) intermediates with additional reagents for the difunctionalization of alkenes is an important research area. A new palladium‐catalyzed oxidative difunctionalization reaction of alkenes with α‐carbonyl alkyl bromides is described, in which the σ‐alkyl palladium(II) intermediate is generated through a Heck insertion and trapped using an aryl C(sp²)? H bond. This method can be applied to various α‐carbonyl alkyl bromides, including primary, secondary, and tertiary α‐bromoalkyl esters, ketones, and amides.     

Hiyama cross‐coupling reaction catalyzed by a palladium salt of 1‐benzyl‐4‐aza‐1‐azoniabicyclo[2.2.2]octane chloride under microwave irradiation

An efficient catalytic system using 1‐benzyl‐4‐aza‐1‐azoniabicyclo[2.2.2]octane chloride ((BeDABCO)₂Pd₂Cl₆) was developed for the Hiyama cross‐coupling reaction of various aryl halides with triethoxy(phenyl)silane. The substituted biaryls were produced in excellent yields in short reaction times using a catalytic amount of this catalyst in NMP at 100 °C. Copyright © 2014 John Wiley & Sons, Ltd.     

Palladium‐Catalyzed Annulation of 1,2‐Diborylalkenes and ‐Arenes with 1‐Bromo‐2‐[(Z)‐2‐bromoethenyl]arenes: A Modular Approach to Multisubstituted Naphthalenes and Fused Phenanthrenes

(Z)‐1,2‐Diaryl‐1,2‐bis(pinacolatoboryl)ethenes underwent double‐cross‐coupling reactions with 1‐bromo‐2‐[(Z)‐2‐bromoethenyl]arenes in the presence of [Pd(PPh₃)₄] as a catalyst and 3 M aqueous Cs₂CO₃ as a base in THF at 80 °C. The double‐coupling reaction gave multisubstituted naphthalenes in good to high yields. Annulation of 1,2‐bis(pinacolatoboryl)arenes with bromo(bromoethenyl)arenes in the presence of a catalyst system that consisted of [Pd₂(dba)₃] (dba=dibenzylideneacetone) and 2‐dicyclohexylphosphino‐2′,6′‐dimethoxybiphenyl (SPhos) under the same conditions produced fused phenanthrenes in good to high yields. The first annulation coupling occurred regiospecifically at the bromoethenyl moiety. This procedure is applicable to the facile synthesis of polysubstituted anthracenes, benzothiophenes, and dibenzoanthracenes through a double annulation pathway by using the corresponding dibromobis[(Z)‐2‐bromoethenyl]benzenes as diboryl coupling partners.