单分散Fe3O4纳米颗粒的控制合成和表征

以十八烯为溶剂、乙酰丙酮铁为铁源,并在油酸、油胺的辅助作用下,通过热分解法成功合成了单分散Fe3O4纳米颗粒。讨论了实验参数如反应温度、表面活性剂的量和种类、溶剂、油酸、油胺对单分散Fe3O4纳米颗粒的尺寸及形貌的影响。利用X射线衍射（XRD）、透射电子显微镜（TEM）、选区电子衍射（SAED）和高分辨透射电子显微镜（HRTEM）对所得产物的物相、结构、尺寸和形貌进行了表征分析。通过振动样品磁强计（VSM）表征产物磁性能,表明在室温下,Fe3O4纳米颗粒的饱和磁化强度（Ms）和矫顽力（Hc）分别为74.0 emu/g,72.6 Oe。     

Electrochemistry of Nitrogen‐Doped Carbon Nanotubes (CNx) with Different Nitrogen Content and Its Application in Simultaneous Determination of Dihydroxybenzene Isomers

The bamboo‐shaped nitrogen‐doped carbon nanotubes (CN_x) with different nitrogen content were synthesized using Fe‐containing SBA‐15 molecular sieve as catalyst with thermal decomposition. The CN_x nanotubes prepared were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X‐ray diffraction (XRD) and Raman spectroscopy. The results suggest that there are a larger amount of defective sites on CN_x nanotubes surfaces due to the nitrogen doping and CN_x nanotube with higher nitrogen content possesses lower graphitic ordering in the framework. Furthermore the effects of nitrogen content on the electrochemistry of CN_x modified electrodes were investigated by cyclic voltammetry (CV). CN_x modified electrodes exhibit better electrocatalytic activities to the oxidation of hydroquinone. Moreover CN_x with lower nitrogen content is in favor of the electron transfer between dihydroxybenzene and electrode surface, while CN_x with higher nitrogen content possesses high surface adsorptive ability. CN_x modified electrodes can be applied to determine dihydroxybenzene isomers directly and simultaneously by linear sweep voltammetry technique without previous separation.     

Microwave Irradiation for the Facile Synthesis of Transition‐Metal Nanoparticles (NPs) in Ionic Liquids (ILs) from Metal–Carbonyl Precursors and Ru‐, Rh‐, and Ir‐NP/IL Dispersions as Biphasic Liquid–Liquid Hydrogenation Nanocatalysts for Cyclohexene

Stable chromium, molybdenum, tungsten, manganese, rhenium, ruthenium, osmium, cobalt, rhodium, and iridium metal nanoparticles (M‐NPs) have been reproducibly obtained by facile, rapid (3 min), and energy‐saving 10 W microwave irradiation (MWI) under an argon atmosphere from their metal–carbonyl precursors [M_x(CO)_y] in the ionic liquid (IL) 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([BMIm][BF₄]). This MWI synthesis is compared to UV‐photolytic (1000 W, 15 min) or conventional thermal decomposition (180–250 °C, 6–12 h) of [M_x(CO)_y] in ILs. The MWI‐obtained nanoparticles have a very small (<5 nm) and uniform size and are prepared without any additional stabilizers or capping molecules as long‐term stable M‐NP/IL dispersions (characterization by transmission electron microscopy (TEM), transmission electron diffraction (TED), and dynamic light scattering (DLS)). The ruthenium, rhodium, or iridium nanoparticle/IL dispersions are highly active and easily recyclable catalysts for the biphasic liquid–liquid hydrogenation of cyclohexene to cyclohexane with activities of up to 522 (mol product) (mol Ru)^?1 h^?1 and 884 (mol product) (mol Rh)^?1 h^?1 and give almost quantitative conversion within 2 h at 10 bar H₂ and 90 °C. Catalyst poisoning experiments with CS₂ (0.05 equiv per Ru) suggest a heterogeneous surface catalysis of Ru‐NPs.     

Preparation,surface morphology,and optical properties of indium(III) oxide nanoparticles by thermolysis of indium–poly(vinyl alcohol) coordination polymer

First report on the preparation of well-dispersed, indium(III) oxide (In₂O₃) nanoparticles with 22–35?nm size by polymer thermolysis is presented. Indium–poly(vinyl alcohol) (PVA) coordination polymer films were prepared by ‘solution casting technique’ from the homogeneous aqueous solution of coordination polymer prepared using PVA and indium(III) nitrate as starting materials; subsequently the films were calcined at 550?°C to yield In₂O₃ nanoparticles. Both indium–PVA coordination polymer that served as the precursor and the titled nanoparticles were characterized by Fourier transform-infrared spectroscopy, photoluminescence (PL), powder X-ray diffraction (XRD), transmission electron microscopy, and thermal analysis. Room temperature PL spectra of the prepared indium oxide nanoparticles showed intense blue emissions around 360, 410 and 430?nm, characteristic of indium oxide nanoparticles due to oxygen vacancies. The lower energy PL emission decreases with an increase of indium(III) content in the precursor. The size of the nanoparticles calculated from line broadening of XRD pattern (cubic; JCPDS: 06-0416) was found to be around 24?nm. The average particle size of the synthesized nanoparticles increased with metal ion content in the precursor coordination polymer.     

Synthesis of Imatinib‐loaded chitosan‐modified magnetic nanoparticles as an anti‐cancer agent for pH responsive targeted drug delivery

Targeted drug delivery is a promising approach to overcome the limitations of classical chemotherapy. In this respect, Imatinib‐loaded chitosan‐modified magnetic nanoparticles were prepared as a pH sensitive system for targeted delivery of drug to tumor sites by applying a magnetic field. The proposed magnetic nanoparticles were prepared through modification of magnetic Fe₃O₄ nanoparticles with chitosan and Imatinib. The structural, morphological and physicochemical properties of the synthesized nanoparticles were determined by different analytical techniques including energy‐dispersive X‐ray spectroscopy (EDS), field emission scanning electron microscopy (FESEM), Fourier‐transform infrared (FTIR) spectroscopy, high resolution transmission electron microscopy (HR‐TEM), vibrating sample magnetometry (VSM), X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS). UV/visible spectrophotometry was used to measure the Imatinib contents. Thermal stability of the prepared particles was investigated and their efficiency of drug loading and release profile were evaluated. The results demonstrated that Fe₃O₄@CS acts as a pH responsive nanocarrier in releasing the loaded Imatinib molecules. Furthermore, the Fe₃O₄@CS/Imatinib nanoparticles displayed cytotoxic effect against MCF‐7 breast cancer cells. Results of this study can provide new insights in the development of pH responsive targeted drug delivery systems to overcome the side effects of conventional chemotherapy.     

Quantitative determination of the composition of nitrided layers on iron using AES

Within the framework of the study of industrial nitriding of steel, AES was chosen as the principle analysis technique. In order to characterise the nitrided layers quantitatively, reliable sensitivity factors were needed. For that purpose, different reference samples containing the pure γ′‐Fe₄N_1?x and ε‐Fe₂N_1?z phases were prepared by gaseous nitriding of pure iron. The characterisation of these references by means of electron probe microanalysis (EPMA) is discussed. The first sample contained a nitrided layer with large γ′‐Fe₄N_1?x grains (～30 µm) with 19.6 at.% nitrogen on top of an iron substrate. The second one contained an ε‐Fe₂N_1?z outer layer (～6 µm) with 26 at.% nitrogen, on a γ′‐Fe₄N_1?x layer (～4 µm) with 19.8 at.% nitrogen, created on top of an iron substrate. In this study, Fe LMM and N KLL Auger electron spectral lines were acquired on the pure γ′‐Fe₄N_1?x and ε‐Fe₂N_1?z phases of these two reference samples in order to calculate the sensitivity factors of iron and nitrogen. Different Auger intensities were considered and compared. It was decided to use the peak areas of the direct Auger electron spectral lines. The values of the sensitivity factors are 0.74 for iron and 0.33 for nitrogen. Finally, a set of three independent and well‐characterised samples containing the γ′‐Fe₄N_1?x and ε‐Fe₂N_1?z phases was used to validate the elaborated quantification procedure. Copyright © 2007 John Wiley & Sons, Ltd.     

Preparation and characterization of copper nanoparticles surface‐capped by alkanethiols

Cu nanoparticles surface‐capped by alkanethiols were synthesized using ligand exchange method in a two‐phase system. The effects of synthetic conditions, including the pH value of CuSO₄ solution, the ratio of cetyltrimethyl ammonium bromide to CuSO₄, and reaction temperature, on the size and shape of as‐synthesized Cu nanoparticles were investigated. As‐synthesized Cu nanoparticles surface‐capped by alkanethiols with different chain lengths (C_xS‐Cu) were characterized by means of X‐ray diffraction, transmission electron microscopy, Fourier transform infrared spectrometry, and ultraviolet–visible light spectrometry. The tribological behavior of C_xS‐Cu as an additive in liquid paraffin was evaluated with a four‐ball machine. Results indicate that cetyltrimethyl ammonium bromide plays an important role in controlling the dispersion of Cu nanoparticles before adding modifier octanethiol into the reaction solution. C_xS‐Cu nanoparticles as additive in liquid paraffin possess excellent antiwear and friction‐reduction performance because of the deposition of nano‐Cu with low melting point on worn steel surface leading to the formation of a self‐repairing protective layer thereon. Copyright © 2013 John Wiley & Sons, Ltd.     

N‐(3‐silyl propyl) diethylene triamine N,N',N'‐tri‐sulfonic acid immobilized on Fe3‐xTixO4 magnetic nanoparticles: A new recyclable heterogeneous nanocatalyst for the synthesis of hexahydroquinolines

In the present study, for the first time N‐(3‐silyl propyl) diethylene triamine N,N',N''‐tri‐sulfonic acid (SPDETATSA) was grafted on magnetic Fe_3‐xTi_xO₄ nanoparticles. The structure of the resulted nanoparticles was characterized based on Fourier‐transform infrared (FT‐IR), energy‐dispersive X‐ray spectroscopy (EDX), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA), and vibrating sample magnetometer (VSM) analyses. The results confirmed the successful immobilization of sulfamic acid groups onto the magnetic support. These nanoparticles exhibited high catalytic activity as novel magnetically recyclable acid nanocatalyst in the synthesis of a diverse range of hexahydroquinolines through one‐pot tandem reactions in excellent yields. Also, this nanocatalyst performed satisfactory catalytic maintenance of activity for the synthesis of the reaction products after 4 rounds of recycling with no considerable loss of activity.     

Ag作催化剂制备的GaN的形貌及其性能

用化学气相沉积法(CVD)在Si(100)衬底上以Ag纳米颗粒为催化剂制备了微纳米结构的GaN,原料是熔融态的金属Ga和气态的NH3。采用X射线衍射仪(XRD)、透射电镜(TEM)、X-ray能谱仪(EDS)、场发射扫描电子显微镜(SEM)、光致发光能谱(PL)和霍尔效应测试对样品进行了结构、成分、形貌和发光、电学性能分析。结果表明:生成的自组装GaN为六方纤锌矿的类似小梯子的微纳米单晶结构,且在不同的温度下,GaN的发光性能和电学性能也有所不同,相对于强的紫外发光峰,其它杂质发光峰很微弱,且均呈p型导电。对本实验所得到的GaN微纳米结构的可能形成机理进行了探讨。     

Synthesis of Au/Al2O3 Nanocatalyst and its Application in the Reduction of p‐Nitrophenol

Gold (Au) nanoparticles supported on alumina (Al₂O₃) were prepared at several pH levels via the deposition‐precipitation (DP) method. The effects of pH at below and above the isoelectric point (IEP) of Al₂O₃ as well as the pH adjustment before and after the addition of the support into the gold chloride solution were investigated. The results revealed the formation of cationic, clusters and metallic Au on alumina. The catalytic activity of these species was tested in the reduction of p‐nitrophenol (p‐NP) using hydrazine as a reductant. The catalytic reaction was monitored spectrophotometerically and the highest rate constant (k‐) achieved based on pseudo first order kinetic model was 12.7 × 10^‐3 s^‐1. Structural and elemental characterizations of the supported gold nanoparticles were carried out using X‐ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy‐dispersive X‐rays (EDX), atomic absorption spectrometry (AAS), and ultraviolet‐visible spectroscopy (UV‐Vis).     

Microwave‐Hydrothermal Preparation and Visible‐Light Photoactivity of Plasmonic Photocatalyst Ag‐TiO2 Nanocomposite Hollow Spheres

Visible‐light‐driven plasmonic photocatalyst Ag‐TiO₂ nanocomposite hollow spheres are prepared by a template‐free chemically‐induced self‐transformation strategy under microwave‐hydrothermal conditions, followed by a photochemical reduction process under xenon lamp irradiation. The prepared samples are characterized by using scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, N₂ adsorption‐desorption isotherms, X‐ray photoelectron spectroscopy, UV/Vis and Raman spectroscopy. Production of ?OH radicals on the surface of visible‐light illuminated TiO₂ was detected by using a photoluminescence method with terephthalic acid as the probe molecule. The photocatalytic activity of as‐prepared samples was evaluated by photocatalytic decolorization of Rhodamine B (RhB) aqueous solution at ambient temperature under visible‐light irradiation. The results show that the surface plasmon absorption band of the silver nanoparticles supported on the TiO₂ hollow spheres was red shifted, and a strong surface enhanced Raman scattering effect for the Ag‐TiO₂ nanocomposite sample was observed. The prepared nanocomposite hollow spheres exhibits a highly visible‐light photocatalytic activity for photocatalytic degradation of RhB in water, and their photocatalytic activity is higher than that of pure TiO₂ and commercial Degussa P25 (P25) powders. Especially, the as‐prepared Ag‐TiO₂ nanocomposite hollow spheres at the nominal atomic ratio of silver to titanium ( R ) of 2 showed the highest photocatalytic activity, which exceeds that of P25 by a factor of more than 2.     

Stabilizing the LaCoAl4 Structure through Indium‐Magnesium Substitution in CeRhIn4−xMgx (x = 0.79 and 0.84) – An Indide with Magnesium Centered Indium Cubes

The intermetallic compounds CeRhIn_4?xMg_x (x = 0.79 and 0.84) were prepared from the elements in sealed tantalum ampoules in a high‐frequency furnace. The samples were investigated by X‐ray powder and single crystal diffraction: LaCoAl₄ type, Pmma, a = 829.5(2), b = 433.56(9), c = 740.2(2) pm, wR2 = 0.0458, 651 F² values, 25 variables for CeRhIn_3.21Mg_0.79 and a = 831.44(10), b = 433.49(10), c = 741.04(10) pm, wR2 = 0.0543, 915 F² values, 25 variables for CeRhIn_3.16Mg_0.84. The indium atoms build up two‐dimensional networks perpendicular to the b axis in an AA stacking sequence leaving slightly distorted trigonal, square and pentagonal prismatic voids for the rhodium, magnesium, and cerium atoms. Both square prismatic voids show small magnesium/indium mixing. The shortest interatomic distances occur for the Rh–Mg contacts (257 pm). Together, the rhodium, indium, and magnesium atoms build up three‐dimensional [RhIn_4?xMg_x] networks in which the cerium atoms fill distorted pentagonal channels.     

Complex–Surfactant‐Assisted Hydrothermal Synthesis and Properties of Hierarchical Worm‐Like Cobalt Sulfide Microtubes Assembled by Hexagonal Nanoplates

The preparation of exquisite hierarchical worm‐like Co_1?xS (x=0.75) microtubes by a one‐pot complex–surfactant‐assisted hydrothermal method is successfully achieved for the first time. The hierarchical structures of the microtube wall are assembled from numerous interleaving hexagonal nanoplates. X‐ray diffraction, X‐ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, and high‐resolution transmission electron microscopy were used to characterize the samples. The experimental results indicate that the “soft template” surfactant cetyltrimethylammonium bromide and the chelating ethylenediamine both play important roles for the formation of hierarchical Co_1?xS microtubes. A possible formation mechanism for the growth processes is proposed. Additionally, the electrochemical and magnetic properties of Co_1?xS microtubes were systematically studied.     

Synthesis of dendrimers terminated by DABCO ligands and applications of its palladium nanoparticles for catalyzing Suzuki–Miyaura and Mizoroki–Heck couplings

A new kind of silica‐supported third‐generation dendrimers capped by 1,4‐diaza‐bicyclo[2.2.2]octane (DABCO) group‐stabilized palladium(0) nanoparticles, and their enhanced catalytic activity in Suzuki–Miyaura and Mizoroki–Heck reactions in excellent yield under mild conditions, was reported. The resulting silica‐supported dendrimer‐stabilized palladium(0) nanoparticles with a particle size of 10–20 nm were prepared in situ by treatment with PdCl₂ and hydrazine in ethanol at 60 °C for 24 h. The catalyst as prepared was characterized by FT‐IR, X‐ray diffraction, thermal analysis, elementary analysis (EA), scanning electron microscopy and transmission electron microscopy. Recycling experiments showed that the catalyst could be easily recovered by simple filtration and reused for up to five cycles without losing its activity. Copyright © 2012 John Wiley & Sons, Ltd.     

硫化锌纳米空心球：合成及光学性质研究

Cubic ZnS hollow nanospheres have been prepared by a simple and template-free solvothermal method. The reaction was accomplished between Zn powder and the in-situ prepared S8. The results of X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) show that the ZnS hollow spheres are composed of ultrafine nanoparticles. The average diameters of the hollow nanospheres are about 100 nm. Their photoluminescence (PL) spectra indicate that they have excellent optical properties.     

Direct synthesis of indium nanoparticles and their application to prepare CuInS<Subscript>2</Subscript> thin films and solar cells

This paper reports a simple hot-injection method to prepare monodisperse indium nanoparticles which are applied as indium sources to prepare CuInS₂ thin films and solar cells. Indium nanoparticles with particle sizes of about 10 nm or even smaller are synthesized and are influenced by the stabilizing agent, reaction temperature and solvent, which can be elucidated by a burst nucleation and growth mechanism. Moreover, the inks from the indium nanoparticles are used to prepare compact and well crystallized CuInS₂ (CIS) films which are characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and I–V measurement. Finally, the CIS solar cells are fabricated on the basis of the CIS films, and their efficiency is about 2.08%, which can be further improved by decreasing series resistance.     

一维CdTe@C@TiO2-Au异质结纳米线的制备及其光催化性能

先利用一步水热法制备了具有核壳结构的CdTe@C纳米线,然后以钛酸异丙酯（TIP）作为钛源对CdTe@C纳米线进行二氧化钛包覆,最后通过原位还原HAuCl4的方法将Au纳米粒子组装到CdTe@C@TiO₂表面形成CdTe@C@TiO₂-Au一维异质结纳米复合材料。用扫描电镜（SEM）,X射线能谱（EDX）,透射电镜（TEM）,X射线衍射（XRD）,X射线光电子能谱（XPS）和紫外-可见漫反射光谱（UV-Vis DRS）等对材料进行表征。探究了CdTe@C@TiO₂-Au催化剂在模拟可见光下降解罗丹明B（RhB）的光催化性能。实验结果表明：不同催化剂对RhB的光降解率不一样,其效果依次为CdTe@C@TiO₂-Au > CdTe@C@TiO₂ > pure TiO₂,其中CdTe@C@TiO₂-Au能在270 min的模拟太阳光下对RhB的光降解率达95.3%,这主要得益于CdTe、碳层、TiO₂和具有表面等离子效应的纳米Au的共同作用。     

Tuning Magnetic Properties of CeO2 by Fe Doping via an Electrochemical Deposition Route

Herein Ce_1?xFe_xO_2?δ nanocomposites were investigated for dilute magnetic semiconductor (DMS) properties. Ce_1?xFe_xO_2?δ nanospheres and porous nanostructures with high surface areas have been successfully prepared by electrochemical deposition at room temperature and atmospheric pressure. The structures and morphologies of Ce_1?xFe_xO_2?δ deposits were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N₂ adsorption–desorption techniques. The magnetic properties of the prepared Ce_1?xFe_xO_2?δ nanospheres and porous nanostructures were studied, and they showed room‐temperature ferromagnetism and giant magnetic moments. In addition, the effects of morphologies and compositions on the magnetic properties of Ce_1?xFe_xO_2?δ deposits were studied.     

Effects of Halogen Bonding in Chemical Activity of Lead(II) Electron Pair: Sonochemical Synthesis,Structural Studies,and Thermal Analysis of Novel Lead(II) Nano Coordination Polymer

The nanoflower lead(II) coordination compound {[Pb(phen)(μ‐CH₃COO)][PF₆]}_n ( 1 ) (phen = 1,10‐phenanthroline) was synthesized by a sonochemical method. The nanostructure was characterized by using scanning electron microscopy (SEM), X‐ray powder diffraction, elemental analysis, and thermal analysis. The single‐crystal X‐ray structure shows that the overall structure of 1 is a 1D coordination polymer. Complex 1 has a bridging acetate pathway. Three halogen bonds observed in the structure and the strong halogen bonding of F–Pb causes chemical activity of the lead electron pair. This is further extended into a 3D supramolecular structure by weak π–π intermolecular interactions. The coordination number of the lead(II) ions is six, resulting in PbN₂O₄. PbO nanoparticles were obtained by the thermolysis of 1 at 180 °C with oleic acid as a surfactant. The morphology and size of the prepared PbO nanoparticles were further observed using scanning electron (SEM) and transmission electron microscopy (TEM), and were analyzed by X‐ray photoelectron spectroscopy (XPS).     

Preparation and characterization of NiO nanoparticles from thermal decomposition of the [Ni(en)3](NO3)2 complex: A facile and low-temperature route

NiO nanoparticles with an average size of 15 nm were easily prepared via the thermal decomposition of the tris(ethylenediamine)Ni(II) nitrate complex [Ni(en)₃](NO₃)₂ as a new precursor at low temperature, and the nanoparticles were characterized by thermal analysis (TGA/DTA), X-ray diffraction (XRD), Fourier-transformed infrared spectroscopy (FT-IR), UV-Vis spectroscopy, BET specific surface area measurement, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM) and magnetic measurements. The magnetic measurements confirm that the product shows a ferromagnetic behavior at room temperature, which may be ascribed to a size confinement effect. The NiO nanoparticles prepared by this method could be an appropriate photocatalytic material due to a strong absorption band at 325 nm. This method is simple, fast, safe, low-cost and also suitable for industrial production of high purity NiO nanoparticles for applied purposes.