Deep Desulfurization by Amphiphilic Lanthanide‐Containing Polyoxometalates in Ionic‐Liquid Emulsion Systems under Mild Conditions

Amphiphilic lanthanide‐containing polyoxometalates (POMs) were prepared by surfactant encapsulation. Investigation of these lanthanide‐containing POMs in oxidative desulfurization (ODS) showed that highly efficient deep desulfurization could be achieved in only 14 min with 100 % conversion of dibenzothiophene under mild conditions by using (DDA)₉LaW₁₀/[omim]PF₆ (DDA=dimethyldioctadecylammonium, omim=1‐octyl‐3‐methyl‐imidazolium) in the presence of H₂O₂. Furthermore, deep desulfurization proceeds smoothly in model oil with an S content as low as 50 ppm. A scaled‐up experiment in which the volume of model oil was increased from 5 to 1000 mL with S content of 1000 ppm indicated that about 99 % sulfur removal can be achieved in 40 mins in an ionic‐liquid emulsion system. To the best of our knowledge, the (DDA)₉LaW₁₀/[omim]PF₆ catalyst system with H₂O₂ as oxidant is one of the most efficient desulfurization systems reported so far.     

Solid‐State Photochromic Behavior and Thermal Bleaching Kinetics of Two Novel Pyrazolone Phenylsemicarbazones

Two novel photochromic compounds, 1,3‐diphenyl‐4‐benzal‐5‐hydroxypyrazole 4‐phenylsemicarbazone ( 1 a ) and 1,3‐diphenyl‐4‐(4‐nitrobenzal)‐5‐hydroxypyrazole 4‐phenylsemicarbazone ( 2 a ), are synthesized and characterized by elemental analysis, mass spectrometry, FTIR spectroscopy, and ¹H NMR spectroscopy. Their properties, including photochromic behavior, fluorescence properties, and thermal bleaching kinetics, are investigated. The results show that the two compounds exhibit improved photochromic performance in coloration and thermal bleaching rates, excellent photostability, high fatigue resistance, and reversible fluorescence switching properties in the solid state in comparison to reported pyrazolone thiosemicarbazones. The thermal bleaching process obeys first‐order kinetics. Bleaching of powders at 130 °C is completed within 90 s for 1 b (the colored isomer of 1 a ) and 150 s for 2 b (the colored isomer of 2 a ). The activation energy for the thermal bleaching process is determined to be 69 and 95 kJ mol^?1, with frequency factors of 9.5×10⁷ and 9.4×10¹⁰ s^?1 for 1 b and 2 b , respectively.     

Probing the Local Structure of Pure Ionic Liquid Salts with Solid‐ and Liquid‐State NMR

Room‐temperature ionic liquids (RTILs) are gaining increasing interest and are considered part of the green chemistry paradigm due to their negligible vapour pressure and ease of recycling. Evidence of liquid‐state order, observed by IR and Raman spectroscopy, diffraction studies, and simulated by ab initio methods, has been reported in the literature. Here, quadrupolar nuclei are used as NMR probes to extract information about the solid and possible residual order in the liquid state of RTILs. To this end, the anisotropic nature and field dependence of quadrupolar and chemical shift interactions are exploited. Relaxation time measurements and a search for residual second‐order quadrupolar coupling were employed to investigate the molecular motions present in the liquid state and infer what kind of order is present. The results obtained indicate that on a timescale of ～10^?8 sec or longer, RTILs behave as isotropic liquids without residual order.     

Synthesis and Thermophysical Properties of Ether‐Functionalized Sulfonium Ionic Liquids as Potential Electrolytes for Electrochemical Applications

During this work, a novel series of hydrophobic room temperature ionic liquids (ILs) based on five ether functionalized sulfonium cations bearing the bis{(trifluoromethyl)sulfonyl}imide, [NTf₂]^? anion were synthesized and characterized. Their physicochemical properties, such as density, viscosity and ionic conductivity, electrochemical window, along with thermal properties including phase transition behavior and decomposition temperature, have been measured. All of these ILs showed large liquid range temperature, low viscosity, and good conductivity. Additionally, by combining DFT calculations along with electrochemical characterization it appears that these novel ILs show good electrochemical stability windows, suitable for the potential application as electrolyte materials in electrochemical energy storage devices.     

Substituent Effects on the Photochromic Properties of Benzothiophene‐Based Derivatives

Five diarylethene photochromic derivatives, the structures of which incorporate a central benzothiophene unit, a left‐hand thiazole group, and a right‐hand benzothiophene group, have been prepared. The compound with a thiazole unit with no substituent on the reaction‐center carbon atom reveals an unprecedented transformation upon light irradiation. When the 4‐position of thiazole is protected by a methyl group, the compounds show high photosensitivity and photochromic properties. In this case, light irradiation affords new compounds with [5]helicene structures featuring the highest redshifted absorption maxima reported to date.     

Fullerene–Ionic‐Liquid Conjugates: A New Class of Hybrid Materials with Unprecedented Properties

A modular approach has been followed for the synthesis of a series of fullerene–ionic‐liquid (IL) hybrids in which the number of IL moieties (two or twelve), anion, and cation have been varied. The combination of C₆₀ and IL give rise to new unique properties in the conjugates such as solubility in water, which was higher than 800 mg mL^?1 in several cases. In addition, one of the C₆₀–IL hybrids has been employed for the immobilization of palladium nanoparticles through ion exchange followed by reduction with sodium borohydride. Surprisingly, during the reduction several carbon nanostructures were formed that comprised nano‐onions and nanocages with few‐layer graphene sidewalls, which have been characterized by means of thermogravimetric analysis (TGA), X‐ray photoelectron spectroscopy (XPS), X‐ray diffraction (XRD), scanning electron microscopy/energy‐dispersive X‐ray analysis (SEM‐EDAX), and high‐resolution transmission electron microscopy (HRTEM). Finally, the material thus obtained was successfully applied as catalyst in Suzuki and Mizoroki–Heck reactions in a concentration of just 0.2 mol %. In the former process it was recyclable for five runs with no loss in activity.     

Theoretical study of the Michael addition of acetylacetone to methyl vinyl ketone catalyzed by the ionic liquid 1‐butyl‐3‐methylimidazolium hydroxide

By performing density functional theory calculations, we have investigated the Michael addition of acetylacetone to methyl vinyl ketone in the absence and presence of the ionic liquid 1‐butyl‐3‐methylimidazolium hydroxide ([bmIm]OH). In the absence of ionic liquids, acetylacetone is firstly tautomerized to enol form and then takes place Michael addition to methyl vinyl ketone. As in the catalyzed Michael addition reaction, a bmIm⁺‐OH^? ion pair is introduced into the reaction system to model the effect of the ionic liquid environment on the reactivity. The calculated results show that the anion enhances nucleophilic ability of acetylacetone since the OH^? anion captures a proton to form an acetylacetone anion‐H₂O complex, and the cation improves the electrophilic ability of methyl vinyl ketone by forming intermolecular hydrogen‐bonds. Both the remarkable effects of the cation and anion on the reactivity of reactants promote this reaction, which take place more easily compared with uncatalyzed reaction. The calculated results show that the main product of the Michael addition is in its ketone form. Our study provides a detailed reaction mechanism of Michael addition catalyzed by basic ionic liquid [bmIm]OH and clearly reveal the catalytic role of ionic liquid in important chemical reaction. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Ab Initio Thermochemistry of Solid‐State Materials

In this contribution we introduce an electronic‐structure‐theory‐based approach to a quantum‐chemical thermochemistry of solids. We first deal with local and collective atomic displacements and explain how to calculate these. The fundamental importance of the phonons, their dispersion relations, their experimental determination as well as their calculation is elucidated, followed by the systematic construction of the thermodynamic potentials on this basis. Subsequently, we provide an introduction for practical computation as well as a critical analysis of the level of accuracy obtainable. We then show how different solid‐state chemistry problems can be solved using this approach. Among these are the calculation of activation energies in perovskite‐like oxides, but we also consider the use of theoretical vibrational frequencies for determining crystal structures. The pressure and temperature polymorphism of elemental tin which has often been classically described is also treated, and we energetically classify the metastable oxynitrides of tantalum. We also demonstrate, using the case of high‐temperature superconductors, that such calculations may be used for an independent evaluation of thermochemical data of unsatisfactory accuracy. Finally, we show the present limits and the future challenges of the theory.     

Ab initio Determination of Solid‐State Nanostructure.

ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract, please click on HTML or PDF.     

Preparation,Solid‐state Characteristics,and Catalytic Properties of Promoted Vanadium Phosphate Materials

The syntheses of transition metal promoted (M = Co, Cr, Fe, Mo) supported vanadium phosphate (VPO) catalysts (TiO₂ (anatase), γ‐Al₂O₃) and their characterization by N₂‐adsorption, X‐ray diffractometry (XRD), FTIR‐spectroscopy and determination of V‐valence state is reported. The catalytic properties were checked in the heterogeneous catalytic ammoxidation of 2, 6‐dichlorotoluene to the corresponding nitrile. The catalyst samples were prepared by synthesis of the precursor compound VOHPO₄ · 0.5 H₂O, impregnation using various metal salt solutions and mixing with the support materials. The characterization revealed increased surface areas for all the promoted samples in comparison to the basic materials. XRD showed the formation of (VO)₂P₂O₇ after calcinations as well as patterns of support materials (anatase, γ‐Al₂O₃). The formation of crystalline proportions of mixed oxides were not observed. The catalytic ammoxidation runs revealed a significant effect of the promoter metals on the catalytic properties by an increase of yield by ca. 20 % compared to bulk VPO. Almost complete conversion of 2, 6‐dichlorotoluene and 81 % yield of nitrile were observed using a 25 %VPCoO/γ‐Al₂O₃ catalyst.     

Manganese‐Containing Periodic Mesoporous Organosilica with Ionic‐Liquid Framework (Mn@PMO‐IL): A Powerful,Durable, and Reusable Nanocatalyst for the Biginelli Reaction

The catalytic application of a novel manganese‐containing periodic mesoporous organosilica with ionic‐liquid framework (Mn@PMO‐IL) in the Biginelli reaction was investigated. First, the Mn@PMO‐IL nanocatalyst was prepared and characterized by TEM, SEM, X‐ray photoelectron spectroscopy, and nitrogen‐sorption analysis. The catalyst was then used in the one‐pot Biginelli condensation of various aldehydes with urea and alkyl acetoacetates under solvent‐free conditions. The corresponding dihydropyrimidone products were obtained in high to excellent yields and selectivities at short reaction times. Moreover, the catalyst was recovered and successfully reused many times with no notable decrease in activity and selectivity.     

Modulation of Spectrokinetic Properties of o‐Quinonoid Reactive Intermediates by Electronic Factors: Time‐Resolved Laser Flash and Steady‐State Photolysis Investigations of Photochromic 6‐ and 7‐Arylchromenes

A variety of differently substituted 6‐ and 7‐arylchromenes such as that depicted undergo photoinduced C? O bond cleavage to yield colored o‐quinonoid intermediates. A combined analysis of μs–ms (laser flash) and real‐time kinetic data show that the o‐quinonoid intermediates decay faster when the C2‐aryl and C6‐/C7‐aryl rings contain electron‐donating and electron‐accepting groups, respectively. Similarly, the decay occurs slowly for the reversed scenario, while intermediate decay rates are observed when both substituents are electron donating.

     

Ionic‐Liquid‐Grafted Rigid Poly(p‐Phenylene) Microspheres: Efficient Heterogeneous Media for Metal Scavenging and Catalysis

Novel guanidinium ionic liquid‐grafted rigid poly(p‐phenylene) (PPPIL) microspheres have been developed for metal scavenging and catalysis. The noble‐metal nanoparticles supported on the microspheres surface can be used as efficient heterogeneous catalysts. The combination of nanoparticles and ionic liquid fragments on the microsphere surfaces enhance the activity and durability of the catalyst. The PPPIL ? Pd⁰ catalyst has been tested in the Suzuki cross‐coupling reaction, and exhibits much higher catalytic activity than Pd catalysts supported on porous polymer matrices. The PPPIL ? Pd⁰ catalyst can be recycled at least for nine runs without any significant loss of activity. The present approach may, therefore, have potential applications in transition‐metal‐nanocatalyzed reactions.     

Electrostatic and Non‐covalent Interactions in Dicationic Imidazolium–Sulfonium Salts with Mixed Anions

A series of thioether‐functionalised imidazolium salts have been prepared and characterized. Subsequent reaction of the thioether‐functionalised imidazolium salts with iodomethane affords imidazolium–sulfonium salts composed of doubly charged cations and two different anions. Imidazolium–sulfonium salts containing a single anion type are obtained either by a solvent extraction method or by anion exchange. The imidazolium–sulfonium salts undergo a methyl‐transfer reaction on exposure to water, giving rise to a new, singly charged imidazolium salt with iodide introduced at the 2‐position of the imidazolium ring. Crystal structures of some of the imidazolium–sulfonium salts were determined by X‐ray crystallography providing the topology of the interactions between the dications and the anions. Electrospray ionization mass spectrometry and quantum‐chemical calculations were used to rationalise the relative strength of these interactions.