Silole‐Infiltrated Photonic Crystal Films as Effective Fluorescence Sensor for Fe3+ and Hg2+

We develop a highly effective silole‐infiltrated photonic crystal (PC) film fluorescence sensor with high sensitivity, good selectivity and excellent reproducibility for Fe³⁺ and Hg²⁺ ions. Hexaphenylsilole (HPS) infiltrated PCs show amplified fluorescence due to the slow photon effect of PC because the emission wavelength of HPS is at the blue band edge of the selected PC’s stopband. The fluorescence can be quenched significantly by Fe³⁺/Hg²⁺ ions owing to electron transfer between HPS and metal ions. The amplified fluorescence enhances the sensitivity of detection, with a detection limit of 5 nM for Fe³⁺/Hg²⁺ ions. The sensor is negligibly responsive to other metal ions and can easily be reproduced by rinsing with pure water due to the special surface wettability of PC. As a result, a highly effective Fe³⁺/Hg²⁺ ions sensor based on HPS‐infiltrated PC film has been achieved, which will be important for effective and practical detection of heavy metal ions.     

Highly Sensitive Fluorometric Hg2+ Biosensor with a Mercury(II)‐Speci?c Oligonucleotide (MSO) Probe and Water‐Soluble Graphene Oxide (WSGO)

A highly sensitive and selective, "turn‐on" and simple Hg²⁺ biosensor is reported by using water‐soluble graphene oxide (WSGO) and dye‐labeled mercury(II)‐specific oligonucleotide (MSO) probe. The probe is rich of thymine (T) and can readily form the stem‐loop structure which consists of the T‐Hg²⁺‐T configuration. In the absence of Hg²⁺, the probe exists as a random coil conformation which can be readily adsorbed on the surface of WSGO by strong noncovalent binding of bases, as a result, the fluorescence of the dye labeled on the terminus of the MSO is strongly quenched by the efficient electron/energy transfer from the dye to WSGO. Upon addition of Hg²⁺, the formation of the T‐Hg²⁺‐T structure releases the MSO from the surface of WSGO, resulting in a restoration of the fluorescence of dye‐labeled MSO probe. Based on this observation, a highly sensitive and selective Hg²⁺ sensor is developed, which can work with "turn‐on" mode in aqueous solutions at room temperature. By using the fluorometric method, the limit of detection for Hg²⁺ can reach picomolar range (187 pmol·L^?1), and it is demonstrated that the biosensor is highly selective and only minimally perturbed by a wide range of non‐specific metal ions.     

A highly sensitive “test paper” for Hg2+ ions based on polyurethane membrane

Heavy metals have caused a lot of serious problems to human beings. A reusable, highly sensitive metal sensor based on polyurethane membrane, which can detect and remove Hg²⁺ ions, was prepared and tested in this work. A sensor with hydroxyl (?OH) group was grafted to polyurethane, and the heavy metal sensitive membrane was synthesized accordingly. Upon addition of Hg²⁺ ion solution to the as‐prepared membrane, the color change occurred instantly. Moreover, different colors appeared with different concentration of the Hg²⁺ ions, which could make the membrane be employed as a heavy metal “test paper”. In addition, the membrane sensor could be recycled after the interaction with Hg²⁺ ions by treating the used membrane with dilute ethylenediaminetetraacetic acid 2Na solution. This efficient and easily prepared membrane‐based sensor has a promising application in environmental science. Copyright © 2013 John Wiley & Sons, Ltd.     

Eco‐friendly Sensors Developed by Herbal Based Silver Nanoparticles for Electrochemical Detection of Mercury (II) Ion

In our study, the single‐use & eco‐friendly electrochemical sensor platform based on herbal silver nanoparticles (AgNPs) was developed for detection of mercury (II) ion (Hg²⁺). For this purpose, the surface of pencil graphite electrode (PGE) was modified with AgNPs and folic acid (FA), respectively. The concentrations of AgNPs and FA were firstly optimized by differential pulse voltammetry (DPV) to obtain an effective surface modification of PGE. Each step at the surface modification process was characterized by using cyclic voltammetry (CV) and electrochemical impedence spectroscopy (EIS). The limit of detection (LOD) for Hg²⁺ was estimated and found to be 8.43 μM by CV technique. The sensor presented an excellent selectivity for Hg²⁺ against to other heavy metal ions such as Ca²⁺, Cd²⁺, Cr³⁺, Cu²⁺, Mg²⁺, Ni²⁺, Pb²⁺, Zn²⁺, Co²⁺ and Mn²⁺. Moreover, a rapid, selective and sensitive detection of Hg²⁺ was successfully performed in the samples of tap water within 1 min.     

Electrochemical aptamer sensor for highly sensitive detection of mercury ion with Au/Pt@carbon nanofiber‐modified electrode

In this paper, an electrochemical aptamer sensor was proposed for the highly sensitive detection of mercury ion (Hg²⁺). Carbon nanofiber (CNF) was prepared by electrospinning and high‐temperature carbonization, which was used for the loading of platinum nanoparticles (PtNPs) by the hydrothermal method. The Pt@CNF nanocomposite was modified on the surface of carbon ionic liquid electrode (CILE) to obtain Pt@CNF/CILE, which was further decorated by gold nanoparticles (AuNPs) through electrodeposition to get Au/Pt@CNF/CILE. Self‐assembling of the thiol‐based aptamer was further realized by the formation of Au‐S bond to get an electrochemical aptamer sensor (Aptamer/Au/Pt@CNF/CILE). Due to the specific binding of aptamer probe to Hg²⁺ with the formation of T‐Hg²⁺‐T structure, a highly sensitive quantitative detection of Hg²⁺ could be achieved by recording the changes of current signal after reacting with Hg²⁺ within the concentration range from 1.0 × 10^?15 mol/L to 1.0 × 10^?6 mol/L and the detection limit of 3.33 × 10^?16 mol/L (3σ). Real water samples were successfully analyzed by this method.     

Fluorescent Gold Clusters as Logic Gates for the Detection of Different Metal Ions

Metal cations can be selectively detected by restoring and quenching the fluorescent intensity of an “ON–OFF” gold nanocluster (Au NC ) sensor. The fluorescent intensity of Au NCs with metal cations can be restored by chelating with ethylenediaminetetraacetic acid except for Hg²⁺ ions. A highly selective detection of Hg²⁺ ion is also achieved under the coexistence of Fe³⁺ or Cr³⁺ ions. This assay was applied successfully for detecting Hg²⁺ in a water sample. The dynamic range of the system was 1 ppm to 25 ppb, and the limit of detection was 25 ppb.     

Polymer‐based colorimetric and “turn off” fluorescence sensor incorporating benzo[2,1,3]thiadiazole moiety for Hg2+ Detection

A conjugated polymer was synthesized by the polymerization of 4,7‐dibromobenzo[2,1,3]thiadiazole ( M‐1 ) with tri{1,4‐diethynyl‐2,5‐bis(2‐(2‐methoxyethoxy)‐ethoxy)}‐benzene ( M‐2 ) via Pd‐catalyzed Sonogashira reaction. The polymer shows strong orange fluorescence. The responsive optical properties of the polymer on various metal ions were investigated through photoluminescence and UV–vis absorption measurements. The polymer displays highly sensitive and selective on‐off Hg²⁺ fluorescence quenching property in tetrahydrofuran solution in comparison with the other cations including Mg²⁺, Zn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Cd²⁺, and Pb²⁺. More importantly, the fluorescent color of the polymer sensor disappears after addition of Hg²⁺, which could be easily detected by naked eyes. The results indicate that this kind of polymer sensor incorporating benzo[2,1,3]thiadiazole moiety as a ligand can be used as a novel colorimetric and fluorometric sensor for Hg²⁺ detection. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A Simple and Highly Sensitive Electrochemically Reduced p‐Nitrobenzoic Acid Film Modified Sensor for Determination of Mercury

Herein, a simple electrochemical sensor was fabricated for sensing Hg²⁺ ions by using electrochemically reduced p‐nitrobenzoic acid molecules modified (ERpNBA) glassy carbon electrode (GCE). The modified electrode was applied for the determination of Hg²⁺ ions by using differential pulse anodic stripping voltammetry (DPASV). Experimental parameters such as concentration of p‐nitrobenzoic acid used for electrode modification, pH, accumulation time and deposition potential used for the determination of Hg²⁺ ions were optimized. The strong interaction between the Hg²⁺ ions and the lone pair of electrons on the nitrogen atoms of ERpNBA molecules leads to highly selective adsorption of Hg²⁺ ions on the modified electrode. Under the optimum experimental conditions, the sensor showed higher sensitivity and very low detection limit for Hg²⁺ ions than other metal ions such as Cd²⁺, Pb²⁺ and Zn²⁺ ions. The LOD for Hg²⁺ ions was 240 pM which is below the guideline value given by the World Health Organization and the earlier reports.     

Highly Sensitive Electrochemical Bioassay for Hg(II) Detection Based on Plasma-Polymerized Propargylamine and Three-Dimensional Reduced Graphene Oxide Nanocomposite

In this study, a nanocomposite consisting of three-dimensional reduced graphene oxide (3D-rGO) and plasma-polymerized propargylamine (3D-rGO@PpPG) was prepared and used as a highly sensitive and selective DNA sensor for detecting Hg²⁺. Given the high density of amino groups in the resultant 3D-rGO@PpPG nanocomposite, thymine-rich and Hg²⁺-targeted DNA was preferentially immobilized on the fabricated sensor surface via the strong electrostatic interaction between DNA strands and the amino-functionalized nanocomposites, followed by detecting Hg²⁺ through T–Hg²⁺–T coordination chemistry between DNA and Hg²⁺. The results of electrochemical measurements revealed that the anchored amount of DNA strands anchored on the 3D-rGO@PpPG nanofilm surface affects the determination of Hg²⁺ in aqueous solution. It showed high sensitivity and selectivity toward Hg²⁺ within concentrations ranging from 0.1 to 200 nM and displayed a low detection limit of 0.02 nM. The new strategy proposed also provides high selectivity of Hg²⁺ against other interfering metal ions, good stability, and repeatability. The excellent applicability of the developed sensor confirms the potential use of plasma-modified nanofilms for the detection of heavy metal ions in real environmental samples and water.     

A Terbium Metal–Organic Framework for Highly Selective and Sensitive Luminescence Sensing of Hg2+ Ions in Aqueous Solution

A series of isomorphic lanthanide metal–organic frameworks (MOFs) Ln(TATAB)?(DMF)₄(H₂O)(MeOH)_0.5 (LnTATAB, Ln=Eu, Tb, Sm, Dy, Gd; H₃TATAB=4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐p‐aminobenzoic acid) have been solvothermally synthesized and structurally characterized. Among these MOFs, TbTATAB exhibits good water stability and a high fluorescence quantum yield. Because mercury ions (Hg²⁺) have a high affinity to nitrogen atoms, and the space between multiple nitrogen atoms from triazine and imino groups is suitable for interacting with Hg²⁺ ions, TbTATAB shows highly selective and sensitive detection of Hg²⁺ in aqueous solution with a detection limit of 4.4 nm . Furthermore, it was successfully applied to detect Hg²⁺ ions in natural water samples.     

Synchronous determination of mercury (II) and copper (II) based on quantum dots-multilayer film

A sensitive sensor for mercury (II) and copper (II) synchronous detection was established via the changed photoluminescence of CdTe quantum dots (QDs) multilayer films in this work. QDs were deposited on the quartz slides to form QDs-multilayer films by electrostatic interactions with poly(dimethyldiallyl ammonium chloride) (PDDA). Hg²⁺ or Cu²⁺ could quench the photoluminescence of the QDs-multilayer films, and glutathione (GSH) was used to remove Hg²⁺ or Cu²⁺ from QDs-multilayer films due to strong affinity of GSH-metal ions, which resulted in the recovered photoluminescence of QDs-multilayer films. There are good linear relationships between the metal ions concentration and the photoluminescence intensity of QDs in the quenched and recovered process. It was found that the Stern–Volmer constants for Hg²⁺ are higher than that for Cu²⁺. Based on different quenching and recovery constant between Hg²⁺ and Cu²⁺, the synchronous detection of Hg²⁺ and Cu²⁺ can be achieved. The linear ranges of this assay were obtained from 0.005 to 0.5 μM for Hg²⁺ and from 0.01 to 1 μM for Cu²⁺, respectively. And the artificial water samples were determined by this method with satisfactory results, the recoveries for Hg²⁺ and Cu²⁺ ions were found in the range of 90.4–106.4%. To the best of our knowledge, it is the first report about the synchronous detection of Hg²⁺ and Cu²⁺ by using quenched and recovered photoluminescence of quantum dots multilayer films.     

A new BODIPY-based fluorescent “turn-on” probe for highly selective and rapid detection of mercury ions

A new fluorescent sensor based on the BODIPY fluorophore and the carboxyl-thiol metal bonding receptor for Hg²⁺ was designed and synthesized. The sensor is highly selective for Hg²⁺ (about 630-fold fluorescence enhancement) over relevant competing metal ions, sensitive to ppb levels of Hg²⁺ (with detection limit of 5.7?nM), and fast response toward Hg²⁺ (within 30?s) in aqueous solution.     

基于四丹磺酰胺杯[4]芳烃的汞离子荧光化学传感器

我们方便地合成了上沿修饰四丹磺酰胺基团的杯[4]芳烃衍生物1,发现该化合物在含50％水的乙腈中显示出对汞离子高选择性和灵敏性的识别作用,竞争实验表明多数金属离子对其检测干扰较小。机理研究结果表明荧光萃灭源于由丹磺酰胺基团到汞离子的光致电子转移过程。另外,通过研究1和1-Hg2+的荧光衰减实验,以及对比双丹磺酰胺杯[4]芳烃2和单丹磺酰胺杯[4]芳烃3对汞离子的识别作用,发现化合物1的四丹磺酰胺基团具有很好的预组织和协同作用。化合物1对汞离子的检测限为3.41×10-6 mol·L-1,这可以使1成为一个潜在的汞离子荧光化学传感器。     

A multi-channel sensor based on 8-hydroxyquinoline ferrocenoate for probing Hg(II) ion

A new sensing molecule 8-hydroxyquinoline ferrocenoate (Fc-Q) which combines ferrocene and 8-hydroxyquinoline moieties was synthesized and applied as a multi-channel sensor for the detection of Hg²⁺ ion. Fc-Q can coordinate with Hg²⁺ to give colorimetric, fluorescent and electrochemical responses. Upon complexation with Hg²⁺ ion, the characteristic absorption peak is red-shifted (Δλ = 45 nm), the fluorescent intensity is quenched at 303 nm, and the oxidation peak is cathodic shifted (ΔE_1/2 = −149 mV). Quantitatively analyzed Hg²⁺ ions at the range of ppb level could be achieved by electrochemical response. For the practical application of sensing Hg²⁺ in real world water, Fc-Q modified screen-printed carbon electrodes were obtained for facile, sensitive, and on-site analysis of Hg²⁺.     

Development of a Sensor Based on Poly(1,2-diaminoanthraquinone) for Individual and Simultaneous Determination of Mercury (II) and Bismuth (III)

Contamination of natural water by mercury (Hg²⁺) and bismuth (Bi³⁺) metal ions have been extensively studied due to their toxic effects. A validated square-wave anodic stripping voltammetry (SW-ASV) method for determining Bi³⁺ and Hg²⁺ ions individually and simultaneously is described. A new electrochemical sensor was constructed using a gold (Au) electrode that has been modified with poly(1,2-diaminoanthraquinone) (p-1,2-DAAQ). Scanning electron microscopy, cyclic voltammetry, and electrochemical impedance spectroscopy were used to characterize the p-1,2-DAAQ/Au modified electrode. Factors such as the polymer film thickness, electrolyte, square wave parameters and preconcentration conditions were optimized to improve the performance of the modified Au electrode. Good linear responses were achieved in the concentration ranges of 1–200 μg L⁻¹ and 1–50 μg L⁻¹ forBi³⁺ and Hg²⁺, respectively, and the limits of detection were 0.27 μg L⁻¹ (Bi³⁺) and 0.29 μg L⁻¹ (Hg²⁺). The interference study results illustrated the high selectivity of the modified electrode for detection of Bi³⁺ and Hg²⁺. The proposed SW-ASV method was successfully applied for Bi³⁺ and Hg²⁺analyses in different real water samples.     

Self-assembly of pyrene boronic acid-based chemodosimeters for highly efficient mercury(II) ion detection

A new chemodosimeter consisting of pyrene and boronic acid (1) for the detection of Hg²⁺ ions is described. The amphiphilic nature of 1 leads to self-assembly in aqueous solution and the high electron density throughout the aggregated pyrene units provides an outstanding platform for energy and electron transport. Self-assembled 1 exhibits a selective and sensitive fluorescence response to Hg²⁺ ions, where the Hg²⁺ ion allows a fast transmetallation of 1, which drastically reduces its fluorescence. The Stern-Volmer (SV) quenching constant for the fluorescence quenching of self-assembled 1 by Hg²⁺ ions is approximately 1.8 × 10⁶ M^?1, and Hg²⁺ ions can be sensed with a detection limit of 6.6 × 10^?9 M. In addition, self-assembled 1 exhibits excellent sensing performance at nano-molar concentration levels for Hg²⁺ ion contamination of tap water, fresh water, and seawater.     

Multimodal Use of New Coumarin‐Based Fluorescent Chemosensors: Towards Highly Selective Optical Sensors for Hg2+ Probing

Despite several types of fluorescent sensing molecules have been proposed and examined to signal Hg²⁺ ion binding, the development of fluorescence‐based devices for in‐field Hg²⁺ detection and screening in environmental and industrial samples is still a challenging task. Herein, we report the synthesis and characterization of three new coumarin‐based fluorescent chemosensors featuring mixed thia/aza macrocyclic framework as receptors units, that is, ligands L1 – L3 . These probes revealed an OFF–ON selective response to the presence of Hg²⁺ ions in MeCN/H₂O 4:1 (v/v), which allowed imaging of this metal ion in Cos‐7 cells in vitro. Once included in silica core–polyethylene glycol (PEG) shell nanoparticles or supported on polyvinyl chloride (PVC)‐based polymeric membranes, ligands L1 – L3 can also selectively sense Hg²⁺ ions in pure water. In particular we have developed an optical sensing array tacking advantage of the fluorescent properties of ligand L3 and based on the computer screen photo assisted technique (CSPT). In the device ligand L3 is dispersed into PVC membranes and it quantitatively responds to Hg²⁺ ions in natural water samples.     

A colorimetric and fluorescent chemosensor for detection of Hg2+ using counterion exchange of cationic polydiacetylene

In this study, a colorimetric and fluorescent chemosensor for mercury ions (Hg²⁺) was developed. Cationic polydiacetylene (PDA) vesicles with a quaternary ammonium cation and iodide as a counterion show a blue-to-red color transition; the color change is accompanied by a fluorescence enhancement in selective response to Hg²⁺ ions because of a perturbation of the ene–yne conjugated backbone induced by counterion exchange. It allows for selective detection of Hg²⁺ with the naked eye and the sensor is used to determine Hg²⁺ concentrations in tap water samples.     

A Metal–Organic Framework/DNA Hybrid System as a Novel Fluorescent Biosensor for Mercury(II) Ion Detection

Mercury(II) ions have emerged as a widespread environmental hazard in recent decades. Despite different kinds of detection methods reported to sense Hg²⁺, it still remains a challenging task to develop new sensing molecules to replenish the fluorescence‐based apparatus for Hg²⁺ detection. This communication demonstrates a novel fluorescent sensor using UiO‐66‐NH₂ and a T‐rich FAM‐labeled ssDNA as a hybrid system to detect Hg²⁺ sensitively and selectively. To the best of our knowledge, it has rarely been reported that a MOF is utilized as the biosensing platform for Hg²⁺ assay.     

A colorimetric and surface-enhanced Raman scattering dual-signal sensor for Hg based on Bismuthiol II-capped gold nanoparticles

The addition of Bismuthiol II to the gold nanoparticles (AuNPs) solution led to the aggregation of AuNPs with a color change from red to blue. As a result, hot spots were formed and strong surface-enhanced Raman scattering (SERS) signal of Bismuthiol II was observed. However, the Bismuthiol II-induced aggregation of AuNPs could be reversed by Hg²⁺ in the system, accompanied by a remarkable color change from blue to red. As evidenced by UV–vis and SERS spectroscopy, the variation in absorption band and SERS intensity was strongly dependent on the concentration of Hg²⁺, suggesting a colorimetric and SERS dual-signal sensor for Hg²⁺. The sensor had a high sensitivity, low detection limits of 2 nM and 30 nM could be achieved by UV–vis spectroscopy and by SERS spectroscopy, respectively. Other environmentally relevant metal ions did not interfere with the detection of Hg²⁺. The method was successfully applied to detect Hg²⁺ in water samples. It was simple, rapid and cost-effective without any modifying or labeling procedure.