Phase‐Separable Polyisobutylene Palladium‐PEPPSI Precatalysts: Synthesis and Application in Buchwald–Hartwig Amination

This paper reports the efficient synthesis of the first class of polyisobutylene(PIB)‐supported palladium‐PEPPSI precatalyst (PEPPSI = pyridine‐enhanced precatalyst preparation, stabilization, and initiation). The new complexes are employed in Buchwald–Hartwig amination of aryl chlorides and are found to be reasonably active in the titled cross‐coupling reaction. The supported catalysts are tested in polar (1,4‐dioxane and 1,2‐dimethoxyethane) as well as in aliphatic reaction media (toluene and n‐heptane) and display superior activity in the highly lipophilic solvent (n‐heptane). The catalytic efficacy of PIB‐Pd‐PEPPSI precatalyst is measured to be comparable to its nonsupported analog. Pd‐leaching is determined by inductively coupled plasma mass spectrometry (ICP‐MS) after a simple liquid/liquid extraction and is found to be 2 ppb in the product phase, translating into a recovery of ≈99.8% of the palladium.     

Pd‐PEPPSI‐IPent‐SiO2: A Supported Catalyst for Challenging Negishi Coupling Reactions in Flow

A silica‐supported precatalyst, Pd‐PEPPSI‐IPent‐SiO₂, has been prepared and evaluated for its proficiency in the Negishi cross‐coupling of hindered and electronically deactivated coupling partners. The precatalyst Pd‐PEPPSI‐IPent loaded onto packed bed columns shows high catalytic activity for the room‐temperature coupling of deactivated/hindered biaryl partners. Also for the first time, the flowed Csp³–Csp² coupling of secondary alkylzinc reagents to (hetero)aromatics has been achieved with high selectivity with Pd‐PEPPSI‐IPent‐SiO₂. These couplings required residence times as short as 3 minutes to effect completion of these challenging transformations with excellent selectivity for the nonrearranged product.     

Enhanced π‐back‐donation resulting in the trans labilization of a pyridine ligand in an N‐heterocyclic carbene (NHC) PdII precatalyst: a case study

The molecular structure of the benzimidazol‐2‐ylidene–PdCl₂–pyridine‐type PEPPSI (pyridine‐enhanced precatalyst, preparation, stabilization and initiation) complex {1,3‐bis[2‐(diisopropylamino)ethyl]benzimidazol‐2‐ylidene‐κC²}dichlorido(pyridine‐κN)palladium(II), [PdCl₂(C₅H₅N)(C₂₃H₄₀N₄)], has been characterized by elemental analysis, IR and NMR spectroscopy, and natural bond orbital (NBO) and charge decomposition analysis (CDA). Cambridge Structural Database (CSD) searches were used to understand the structural characteristics of the PEPPSI complexes in comparison with the usual N‐heterocyclic carbene (NHC) complexes. The presence of weak C—H…Cl‐type hydrogen‐bond and π–π stacking interactions between benzene rings were verified using NCI plots and Hirshfeld surface analysis. The preferred method in the CDA of PEPPSI complexes is to separate their geometries into only two fragments, i.e. the bulky NHC ligand and the remaining fragment. In this study, the geometry of the PEPPSI complex is separated into five fragments, namely benzimidazol‐2‐ylidene (Bimy), two chlorides, pyridine (Py) and the Pd^II ion. Thus, the individual roles of the Pd atom and the Py ligand in the donation and back‐donation mechanisms have been clearly revealed. The NHC ligand in the PEPPSI complex in this study acts as a strong σ‐donor with a considerable amount of π‐back‐donation from Pd to C_carbene. The electron‐poor character of Pd^II is supported by π‐back‐donation from the Pd centre and the weakness of the Pd—N(Py) bond. According to CSD searches, Bimy ligands in PEPPSI complexes have a stronger σ‐donating ability than imidazol‐2‐ylidene ligands in PEPPSI complexes.     

Highly efficient Pd‐PEPPSI‐IPr catalyst for N‐(4‐pyridazinyl)‐bridged bicyclic sulfonamides via Suzuki–Miyaura coupling reaction

A protocol for the Suzuki–Miyaura coupling of novel 2‐(6‐chloropyridazin‐3‐yl)‐5‐(aryl/heteroarylsulfonyl)‐2,5‐diazabicyclo[2.2.1]heptanes and heteroarylboronic acids to afford variety of coupled products was realized. Pd‐PEPPSI‐IPr catalyst was found to be a powerful and reusable catalyst under relatively mild reaction conditions.     

Pd‐PEPPSI‐IHeptCl: A General‐Purpose,Highly Reactive Catalyst for the Selective Coupling of Secondary Alkyl Organozincs

Dichloro[1,3‐bis(2,6‐di‐4‐heptylphenyl)imidazol‐2‐ylidene](3‐chloropyridyl)palladium(II) (Pd‐PEPPSI‐IHept^Cl), a new, very bulky yet flexible Pd–N‐heterocyclic carbene (NHC) complex has been evaluated in the cross‐coupling of secondary alkylzinc reactants with a wide variety of oxidative addition partners in high yields and excellent selectivity. The desired, direct reductive elimination branched products were obtained with no sign of migratory insertion across electron‐rich and electron‐poor aromatics and all forms of heteroaromatics (five and six membered). Impressively, there is no impact of substituents at the site of reductive elimination (i.e., ortho or even di‐ortho), which has not yet been demonstrated by another catalyst system to date.     

An Efficient Low‐Temperature Stille–Migita Cross‐Coupling Reaction for Heteroaromatic Compounds by Pd–PEPPSI–IPent

The reactivity of Pd–PEPPSI (Pyridine, Enhanced, Precatalyst, Preparation, Stabilization, and Initiation) precatalysts in the Stille–Migita cross‐coupling reaction between heteroaryl stannanes and aryl or heteroaryl halides was evaluated. In general, Pd–PEPPSI–IPent (IPent=diisopentylphenylimidazolium derivative) demonstrated high efficiency over a variety of challenging aryl or heteroaryl halides with thiophene‐, furan‐, pyrrole‐, and thiazole‐based organostannanes when compared with Pd–PEPPSI–IPr (IPr=diisopropylphenylimidazolium derivative). The transformations proceeded at appreciably lower temperatures (30–80 °C) than triarylphosphine‐based Pd catalysts, improving the scope of this useful carbon–carbon bond‐forming process.     

Cavity‐Shaped Ligands: Calix[4]arene‐Based Monophosphanes for Fast Suzuki–Miyaura Cross‐Coupling

Five conical calix[4]arenes that have a PPh₂ group as the sole functional group anchored at their upper rim were assessed in palladium‐catalysed cross‐coupling reactions of phenylboronic acid with aryl halides (dioxane, 100 °C, NaH). With arylbromides, remarkably high activities were obtained with the catalytic systems remaining stable for several days. The performance of the ligands is comparable to a Buchwald‐type triarylphosphane, namely, (2′‐methyl[1,1′‐biphenyl]‐2‐yl)diphenylphosphane, which in contrast to the calixarenyl phosphanes tested may display chelating behaviour in solution. With the fastest ligand, 5‐diphenylphosphanyl‐25,26,27,28‐tetra(p‐methoxy)benzyloxy‐calix[4]arene ( 8 ), the reaction turnover frequency for the arylation of 4‐bromotoluene was 321 000 versus 214 000 mol(ArBr).mol(Pd)^?1. h^?1 for the reference ligand. The calixarene ligands were also efficient in Suzuki cross‐coupling reactions with aryl chlorides. Thus, by using 1 mol % of [Pd(OAc)₂] associated with one of the phosphanes, full conversion of the deactivated arenes 4‐chloroanisole and 4‐chlorotoluene was observed after 16 h. The high performance of the calixarenyl–phosphanes in Suzuki–Miyaura coupling of aryl bromides possibly relies on their ability to stabilise a monoligand [Pd⁰L(ArBr)] species through supramolecular binding of the Pd‐bound arene inside the calixarene cavity.     

The Selective Cross‐Coupling of Secondary Alkyl Zinc Reagents to Five‐Membered‐Ring Heterocycles Using Pd‐PEPPSI‐IHeptCl

The ability to cross‐couple secondary alkyl centers is fraught with a number of problems, including difficult reductive elimination, which often leads to β‐hydride elimination. Whereas catalysts have been reported that provide decent selectivity for the expected (non‐rearranged) cross‐coupled product with aryl or heteroaryl oxidative‐addition partners, none have shown reliable selectivity with five‐membered‐ring heterocycles. In this report, a new, rationally designed catalyst, Pd‐PEPPSI‐IHept^Cl, is demonstrated to be effective in selective cross‐coupling reactions with secondary alkyl reagents across an impressive variety of furans, thiophenes, and benzo‐fused derivatives (e.g., indoles, benzofurans), in most instances producing clean products with minimal, if any, migratory insertion for the first time.     

Room‐temperature Suzuki–Miyaura cross‐coupling reaction with α‐diimine Pd(II) catalysts

An α‐diimine Pd(II) complex containing chiral sec‐phenethyl groups, {bis[N,N′‐(4‐methyl‐2‐sec‐phenethylphenyl)imino]‐2,3‐butadiene}dichloropalladium (rac‐ C1 ), was synthesized and characterized. rac‐ C1 was applied as an efficient catalyst for the Suzuki–Miyaura cross‐coupling reaction between various aniline halides and arylboronic acid in PEG‐400–H₂O at room temperature. Among a series of aniline halides, rac‐ C1 did not catalyze the cross‐coupling of aniline chlorides and fluorides but efficiently catalyzed the cross‐coupling of aniline bromides and iodides with phenylboronic acid. The catalytic activity reduced slightly with increasing steric hindrance of the aniline bromides. The complexes {bis[N,N′‐(4‐fluoro‐2,6‐diphenylphenyl)imino]‐2,3‐butadiene}dichloropalladium and {bis[N,N′‐(4‐fluoro‐2,6‐diphenylphenyl)imino]acenaphthene}dichloropalladium were also found to be efficient catalysts for the reaction. Copyright © 2015 John Wiley & Sons, Ltd.     

Room‐Temperature Amination of Deactivated Aniline and Aryl Halide Partners with Carbonate Base Using a Pd‐PEPPSI‐IPentCl‐ o‐Picoline Catalyst

Current state‐of‐the‐art protocols for the coupling of unreactive amines (e.g., electron‐poor anilines) with deactivated oxidative‐addition partners (e.g., electron‐rich and/or hindered aryl chlorides) involve strong heating (usually >100 °C) and/or tert‐butoxide base, and even then not all couplings are successful. The aggressive base tert‐butoxide reacts with and in many instances destroys the typical functional groups that are necessary for the function of most organic molecules, such as carbonyl groups, esters, nitriles, amides, alcohols, and amines. The new catalyst described herein, Pd‐PEPPSI‐IPent^Cl‐o‐picoline, is able to aminate profoundly deactivated coupling partners when using only carbonate base at room temperature.     

Palladium‐Catalyzed Annulation of 1,2‐Diborylalkenes and ‐Arenes with 1‐Bromo‐2‐[(Z)‐2‐bromoethenyl]arenes: A Modular Approach to Multisubstituted Naphthalenes and Fused Phenanthrenes

(Z)‐1,2‐Diaryl‐1,2‐bis(pinacolatoboryl)ethenes underwent double‐cross‐coupling reactions with 1‐bromo‐2‐[(Z)‐2‐bromoethenyl]arenes in the presence of [Pd(PPh₃)₄] as a catalyst and 3 M aqueous Cs₂CO₃ as a base in THF at 80 °C. The double‐coupling reaction gave multisubstituted naphthalenes in good to high yields. Annulation of 1,2‐bis(pinacolatoboryl)arenes with bromo(bromoethenyl)arenes in the presence of a catalyst system that consisted of [Pd₂(dba)₃] (dba=dibenzylideneacetone) and 2‐dicyclohexylphosphino‐2′,6′‐dimethoxybiphenyl (SPhos) under the same conditions produced fused phenanthrenes in good to high yields. The first annulation coupling occurred regiospecifically at the bromoethenyl moiety. This procedure is applicable to the facile synthesis of polysubstituted anthracenes, benzothiophenes, and dibenzoanthracenes through a double annulation pathway by using the corresponding dibromobis[(Z)‐2‐bromoethenyl]benzenes as diboryl coupling partners.     

Well‐Defined N‐Heterocyclic Carbene‐Palladium Complexes as Efficient Catalysts for Domino Sonogashira Coupling/Cyclization Reaction and C‐H bond Arylation of Benzothiazole

Well‐defined and air‐stable PEPPSI (Pyridine Enhanced Precatalyst Preparation Stabilization and Initiation) themed palladium bis‐N‐heterocyclic carbene complexes have been developed for the domino Sonogashira coupling/cyclization reaction of 2‐iodophenol with a variety of terminal alkynes and C‐H bond arylation of benzothiazole with aryl iodides. The PEPPSI themed palladium complexes, 2a and 2b were synthesized in good yields from the reaction of corresponding imidazolium salts with PdCl₂ and K₂CO₃ in pyridine. The new air‐stable palladium‐NHC complexes were characterized by NMR spectroscopy, X‐ray crystallography, elemental analysis, and mass spectroscopy studies. The PEPPSI themed palladium(II) bis‐N‐heterocyclic carbene complexes 2a and 2b exhibited excellent catalytic activities for domino Sonogashira coupling/cyclization reaction of 2‐iodophenol with terminal alkynes yielding benzofuran derivatives. In addition, the palladium complexes, 2a and 2b successfully catalyzed the direct C‐H bond arylation of benzothiazole with aryl iodides as coupling partners in presence of CuI as co‐catalyst.     

Selective Monoarylation of Primary Amines Using the Pd‐PEPPSI‐IPentCl Precatalyst

A single set of reaction conditions for the palladium‐catalyzed amination of a wide variety of (hetero)aryl halides using primary alkyl amines has been developed. By combining the exceptionally high reactivity of the Pd‐PEPPSI‐IPent^Cl catalyst (PEPPSI=pyridine enhanced precatalyst preparation, stabilization, and initiation) with the soluble and nonaggressive sodium salt of BHT (BHT=2,6‐di‐tert‐butyl‐hydroxytoluene), both six‐ and five‐membered (hetero)aryl halides undergo efficient and selective amination.     

Palladium‐catalyzed decarboxylative coupling of α,β‐unsaturated carboxylic acids with aryl tosylates

We report a general method for selective cross‐coupling of α,β‐unsaturated carboxylic acids with aryl tosylates enabled by versatile Pd(II) complexes. This method features the general cross‐coupling of ubiquitous α,β‐unsaturated carboxylic acids by decarboxylation. The transformation is characterized by its operational simplicity, the use of inexpensive, air‐stable Pd(II) catalysts, scalability and wide substrate scope. The reaction proceeds with high trans selectivity to furnish valuable (E)‐1,2‐diarylethenes.     

A Highly Versatile Catalyst System for the Cross‐Coupling of Aryl Chlorides and Amines

The syntheses of 2‐(di‐tert‐butylphosphino)‐N,N‐dimethylaniline ( L1 , 71 %) and 2‐(di‐1‐adamantylphosphino)‐N,N‐dimethylaniline ( L2 , 74 %), and their application in Buchwald–Hartwig amination, are reported. In combination with [Pd(allyl)Cl]₂ or [Pd(cinnamyl)Cl]₂, these structurally simple and air‐stable P,N ligands enable the cross‐coupling of aryl and heteroaryl chlorides, including those bearing as substituents enolizable ketones, ethers, esters, carboxylic acids, phenols, alcohols, olefins, amides, and halogens, to a diverse range of amine and related substrates that includes primary alkyl‐ and arylamines, cyclic and acyclic secondary amines, N? H imines, hydrazones, lithium amide, and ammonia. In many cases, the reactions can be performed at low catalyst loadings (0.5–0.02 mol % Pd) with excellent functional group tolerance and chemoselectivity. Examples of cross‐coupling reactions involving 1,4‐bromochlorobenzene and iodobenzene are also reported. Under similar conditions, inferior catalytic performance was achieved when using Pd(OAc)₂, PdCl₂, [PdCl₂(cod)] (cod=1,5‐cyclooctadiene), [PdCl₂(MeCN)₂], or [Pd₂(dba)₃] (dba=dibenzylideneacetone) in combination with L1 or L2 , or by use of [Pd(allyl)Cl]₂ or [Pd(cinnamyl)Cl]₂ with variants of L1 and L2 bearing less basic or less sterically demanding substituents on phosphorus or lacking an ortho‐dimethylamino fragment. Given current limitations associated with established ligand classes with regard to maintaining high activity across the diverse possible range of C? N coupling applications, L1 and L2 represent unusually versatile ligand systems for the cross‐coupling of aryl chlorides and amines.     

Synthesis of Pyrrolo[2,3‐d]pyrimidines by Copper‐Mediated Carbomagnesiations of N‐Sulfonyl Ynamides and Application to the Preparation of Rigidin A and a 7‐Azaserotonin Derivative

The treatment of readily available N‐alkynyl‐5‐iodo‐6‐sulfamido‐pyrimidines with iPrMgCl?LiCl followed by a transmetalation with CuCN?2 LiCl produces, after intramolecular carbocupration, metalated py r rolo[2,3‐d]pyrimidines. Quenching of these pyrimidines with allylic halides or acid chlorides results in polyfunctional pyrrolo[2,3‐d]pyrimidines. Further reaction with ICl and a Negishi cross‐coupling, using PEPPSI‐iPr as the catalyst, furnishes fully substituted N‐heterocycles. A formal synthesis of the marine alkaloid rigidin A has been achieved as well as the preparation of a derivative of 7‐azaserotonine, related to the natural hormone serotonin.     

Catalyst Activation,Deactivation, and Degradation in Palladium‐Mediated Negishi Cross‐Coupling Reactions

Pd‐mediated Negishi cross‐coupling reactions were studied by a combination of kinetic measurements, electrospray‐ionization (ESI) mass spectrometry, ³¹P NMR and UV/Vis spectroscopy. The kinetic measurements point to a rate‐determining oxidative addition. Surprisingly, this step seems to involve not only the Pd catalyst and the aryl halide substrate, but also the organozinc reagent. In this context, the ESI‐mass spectrometric observation of heterobimetallic Pd–Zn complexes [L₂PdZnR]⁺ (L=S‐PHOS, R=Bu, Ph, Bn) is particularly revealing. The inferred presence of these and related neutral complexes with a direct Pd–Zn interaction in solution explains how the organozinc reagent can modulate the reactivity of the Pd catalyst. Previous theoretical calculations by González‐Pérez et al. (Organometallics­ 2012 , 31, 2053) suggest that the complexation by the organozinc reagent lowers the activity of the Pd catalyst. Presumably, a similar effect also causes the rate decrease observed upon addition of ZnBr₂. In contrast, added LiBr apparently counteracts the formation of Pd–Zn complexes and restores the high activity of the Pd catalyst. At longer reaction times, deactivation processes due to degradation of the S‐PHOS ligand and aggregation of the Pd catalyst come into play, thus further contributing to the appreciable complexity of the title reaction.     

Synthesis of new methylated thieno[2,3‐a] and [3,2‐b]carbazoles by reductive cyclization of 6‐(2′‐Nitrophenyl)benzo[b]thiophenes obtained by palladium‐catalyzed cross‐coupling isabel

The synthesis of new methylated thieno[2,3‐a] and [3,2‐b]carbazoles (5) (R=H) was achieved by a palladium‐catalyzed cross‐coupling, intramolecular reductive cyclization sequence of reactions. The cyclization precursors 6‐(2′‐nitrophenyl)benzo[b]thiophenes (3) were obtained by Suzuki cross‐coupling of 6‐boronated methylbenzo[b]thiophenes intermediates (2) with 2‐bromo or iodonitrobenzene. The boronated intermediates (2) were prepared via bromine‐lithium exchange followed by boron transmetalation and coupled in situ using Pd(OAc)₂ giving thus a “one‐pot” three steps reaction from the 6‐bromobenzo[b]thio‐phenes (1) to the cyclization precursors (3) . In the reductive cyclization step, N‐ethylthienocarbazoles (5) (R=Et) were also obtained. Several experiments have been made varying the amount of triethylphosphite and the time of reaction, to avoid their formation.     

Optimization of the Suzuki coupling reaction in the synthesis of 2‐[(2‐substituted)phenyl]pyrrole derivatives

A facile three‐step synthesis of 2‐(2‐aminophenyl)pyrrole ( 1 ) and 2‐[(2‐aminomethyl)phenyl]pyrrole ( 2 ) is reported by use of Suzuki coupling of N‐Boc‐pyrrol‐2‐yl boronic acid ( 3 ) and o‐substituted aryl halogenides, followed by hydrogenation. The Pd‐catalyzed cross‐coupling reaction is optimized to be applicable to a wide range of substitued aryl halogenides, with electron‐donating and electron‐withdrawing substituents, 5a , 5b , 5c , 5d , 5e , 5f , 5g . Moreover, Pd‐catalyzed coupling of o‐bromoaniline and 3 could be applied for the one‐step preparation of pyrrolo[1,2‐c]quinazolin‐5(6H)‐one ( 8 ). J. Heterocyclic Chem., (2011).     

Palladium‐catalysed Suzuki reaction of aryl chlorides in aqueous media using 1,3‐dialkylimidazolidin‐2‐ylidene ligands

A highly effective, easy to handle and environmentally benign process for palladium‐mediated Suzuki cross‐coupling is developed. The in situ prepared three‐component system Pd(OAc)₂–1,3‐bis(alkyl)imidazolinium chlorides (2a–f) and Cs₂CO₃ catalyses quantitatively the Suzuki cross‐coupling of deactivated aryl chlorides. Copyright © 2005 John Wiley & Sons, Ltd.