Synthesis of Hierarchically Porous Sandwich‐Like Carbon Materials for High‐Performance Supercapacitors

For the first time, hierarchically porous carbon materials with a sandwich‐like structure are synthesized through a facile and efficient tri‐template approach. The hierarchically porous microstructures consist of abundant macropores and numerous micropores embedded into the crosslinked mesoporous walls. As a result, the obtained carbon material with a unique sandwich‐like structure has a relatively high specific surface (1235 m² g^?1), large pore volume (1.30 cm³ g^?1), and appropriate pore size distribution. These merits lead to a comparably high specific capacitance of 274.8 F g^?1 at 0.2 A g^?1 and satisfying rate performance (87.7 % retention from 1 to 20 A g^?1). More importantly, the symmetric supercapacitor with two identical as‐prepared carbon samples shows a superior energy density of 18.47 Wh kg^?1 at a power density of 179.9 W kg^?1. The asymmetric supercapacitor based on as‐obtained carbon sample and its composite with manganese dioxide (MnO₂) can reach up to an energy density of 25.93 Wh kg^?1 at a power density of 199.9 W kg^?1. Therefore, these unique carbon material open a promising prospect for future development and utilization in the field of energy storage.     

Ultrahigh Energy Density Realized by a Single‐Layer β‐Co(OH)2 All‐Solid‐State Asymmetric Supercapacitor

A conceptually new all‐solid‐state asymmetric supercapacitor based on atomically thin sheets is presented which offers the opportunity to optimize supercapacitor properties on an atomic level. As a prototype, β‐Co(OH)₂ single layers with five‐atoms layer thickness were synthesized through an oriented‐attachment strategy. The increased density‐of‐states and 100 % exposed hydrogen atoms endow the β‐Co(OH)₂ single‐layers‐based electrode with a large capacitance of 2028 F g^?1. The corresponding all‐solid‐state asymmetric supercapacitor achieves a high cell voltage of 1.8 V and an exceptional energy density of 98.9 Wh kg^?1 at an ultrahigh power density of 17 981 W kg^?1. Also, this integrated nanodevice exhibits excellent cyclability with 93.2 % capacitance retention after 10 000 cycles, holding great promise for constructing high‐energy storage nanodevices.     

MnO2 Nanosheets Grown on Nitrogen‐Doped Hollow Carbon Shells as a High‐Performance Electrode for Asymmetric Supercapacitors

A hierarchical hollow hybrid composite, namely, MnO₂ nanosheets grown on nitrogen‐doped hollow carbon shells (NHCSs@MnO₂), was synthesized by a facile in situ growth process followed by calcination. The composite has a high surface area (251 m²g^?1) and mesopores (4.5 nm in diameter), which can efficiently facilitate transport during electrochemical cycling. Owing to the synergistic effect of NHCSs and MnO₂, the composite shows a high specific capacitance of 306 F g^?1, good rate capability, and an excellent cycling stability of 95.2 % after 5000 cycles at a high current density of 8 A g^?1. More importantly, an asymmetric supercapacitor (ASC) assembled by using NHCSs@MnO₂ and activated carbon as the positive and negative electrodes exhibits high specific capacitance (105.5 F g^?1 at 0.5 A g^?1 and 78.5 F g^?1 at 10 A g^?1) with excellent rate capability, achieves a maximum energy density of 43.9 Wh kg^?1 at a power density of 408 W kg^?1, and has high stability, whereby the ASC retains 81.4 % of its initial capacitance at a current density of 5 A g^?1 after 4000 cycles. Therefore, the NHCSs@MnO₂ electrode material is a promising candidate for future energy‐storage systems.     

Sodium‐Doped Mesoporous Ni2P2O7 Hexagonal Tablets for High‐Performance Flexible All‐Solid‐State Hybrid Supercapacitors

A simple hydrothermal method has been developed to prepare hexagonal tablet precursors, which are then transformed into porous sodium‐doped Ni₂P₂O₇ hexagonal tablets by a simple calcination method. The obtained samples were evaluated as electrode materials for supercapacitors. Electrochemical measurements show that the electrode based on the porous sodium‐doped Ni₂P₂O₇ hexagonal tablets exhibits a specific capacitance of 557.7 F g^?1 at a current density of 1.2 A g^?1. Furthermore, the porous sodium‐doped Ni₂P₂O₇ hexagonal tablets were successfully used to construct flexible solid‐state hybrid supercapacitors. The device is highly flexible and achieves a maximum energy density of 23.4 Wh kg^?1 and a good cycling stability after 5000 cycles, which confirms that the porous sodium‐doped Ni₂P₂O₇ hexagonal tablets are promising active materials for flexible supercapacitors.     

Strong and Robust Polyaniline‐Based Supramolecular Hydrogels for Flexible Supercapacitors

We report a supramolecular strategy to prepare conductive hydrogels with outstanding mechanical and electrochemical properties, which are utilized for flexible solid‐state supercapacitors (SCs) with high performance. The supramolecular assembly of polyaniline and polyvinyl alcohol through dynamic boronate bond yields the polyaniline–polyvinyl alcohol hydrogel (PPH), which shows remarkable tensile strength (5.3 MPa) and electrochemical capacitance (928 F g^?1). The flexible solid‐state supercapacitor based on PPH provides a large capacitance (306 mF cm^?2 and 153 F g^?1) and a high energy density of 13.6 Wh kg^?1, superior to other flexible supercapacitors. The robustness of the PPH‐based supercapacitor is demonstrated by the 100 % capacitance retention after 1000 mechanical folding cycles, and the 90 % capacitance retention after 1000 galvanostatic charge–discharge cycles. The high activity and robustness enable the PPH‐based supercapacitor as a promising power device for flexible electronics.     

Mn3−xFexO4 Hollow Nanostructures for High-Performance Asymmetric Supercapacitor Applications

Design of hollow nanostructure and controllable phase of mixed metal oxides for improving performance in supercapacitor applications is highly desirable. Here we demonstrate the rational design and synthesis of Mn_3−xFe_xO₄ hollow nanostructures for supercapacitor applications. Owing to high porosity and the specific surface area that provides more active sites for electrochemical reactions, the electrochemical performance of Mn_3−xFe_xO₄ hollow nanostructure substantially enhanced comparing with pristine Mn₃O₄. Particularly, in 1.0 M KOH electrolyte, Mn_0.16Fe_2.84O₄ with a typical diameter of 20 nm exhibits excellent specific capacitance of 2675, 2320, 1662, 987 F g⁻¹ at current densities of 1, 2, 5, 10 A g⁻¹, respectively, which is significantly superior to those of other transition metal oxides. Besides, an asymmetric supercapacitor is assembled by using Mn_0.16Fe_2.84O₄ and activated carbon as a positive and a negative electrode, respectively. Electrochemical results indicate a high energy density of 42 Wh kg⁻¹ at a power density of 0.75 kW kg⁻¹, which makes this hollow nanostructure a highly promising electrode for achieving high-performance next-generation supercapacitors.     

Aqueous Manganese Dioxide Ink for Paper‐Based Capacitive Energy Storage Devices

We report a simple approach based on a chemical reduction method to synthesize aqueous inorganic ink comprised of hexagonal MnO₂ nanosheets. The MnO₂ ink exhibits long‐term stability and continuous thin films can be formed on various substrates without using any binder. To obtain a flexible electrode for capacitive energy storage, the MnO₂ ink was printed onto commercially available A4 paper pretreated with multiwalled carbon nanotubes. The electrode exhibited a maximum specific capacitance of 1035 F g^?1 (91.7 mF cm^?2). Paper‐based symmetric and asymmetric capacitors were assembled, which gave a maximum specific energy density of 25.3 Wh kg^?1 and a power density of 81 kW kg^?1. The device could maintain a 98.9 % capacitance retention over 10 000 cycles at 4 A g^?1. The MnO₂ ink could be a versatile candidate for large‐scale production of flexible and printable electronic devices for energy storage and conversion.     

Synthesis of Phosphorus‐Doped Graphene and its Wide Potential Window in Aqueous Supercapacitors

Phosphorus‐doped (P‐doped) graphene with the P doping level of 1.30 at % was synthesized by annealing the mixture of graphene and phosphoric acid. The presence of P was confirmed by elemental mapping and X‐ray photoelectron spectroscopy, while the morphology of P‐doped graphene was revealed by using scanning electron microscopy and transmission electron microscopy. To investigate the effect of P doping, the electrochemical properties of P‐doped graphene were tested as a supercapacitor electrode in an aqueous electrolyte of 1 M H₂SO₄. The results showed that doping of P in graphene exhibited significant improvement in terms of specific capacitance and cycling stability, compared with undoped graphene electrode. More interestingly, the P‐doped graphene electrode can survive at a wide voltage window of 1.7 V with only 3 % performance degradation after 5000 cycles at a current density of 5 A g^?1, providing a high energy density of 11.64 Wh kg^?1 and a high power density of 831 W kg^?1.     

Design of high-performance core-shell hollow carbon nanofiber@nickel-cobalt double hydroxide composites for supercapacitive energy storage

The supercapacitive performances of supercapacitor mainly depend on the physical nanostructure and micro-morphology of electrode materials. Here, we demonstrated the design, synthesis and electrochemical performances of core-shell hollow carbon nanofiber@nickel-cobalt-layered double hydroxide (HCNF@ Ni_0.67Co_0.33-LDH) nanocomposites with an optimized Ni/Co molar ratio of 2:1. The HCNF was used as superiorly conductive core to sustain the nanoporous silky Ni_0.67Co_0.33-LDH shell, which can efficiently provide fast transport pathways for electrons and electrolyte ions. The outstanding specific capacitance of 2486 F g^?1 at 1 A g^?1 based on galvanostatic charge-discharge curves were acquired for the highly electroactive HCNF@Ni_0.67Co_0.33-LDH. Furthermore, the HCNF@Ni_0.67Co_0.33-LDH electrode delivered a distinguished rate capability with a specific capacitance of 1890 F g^?1 even at 15 A g^?1. Notably, an asymmetric supercapacitor with HCNF@Ni_0.67Co_0.33-LDH as cathode and HCNF as anode was devised, which presented a prominent specific capacitance of 228 F g^?1, good energy density of 62.1 Wh kg^?1, and impressive cycling stability (90.6% capacitance retention after 10,000 cycles).     

Synthesis of porous biocarbon supported Ni3S4/CeO2 nanocomposite as high-efficient electrode materials for asymmetric supercapacitors

Biocarbon-supported polymetallic composites (CAS@Ni₃S₄/CeO₂) were fabricated by a facile hydrothermal process. The as-prepared CAS@Ni₃S₄/CeO₂ materials integrated the advantages of transition metal sulfides (good conductivity), rare-earth metal oxides (excellent stability), as well as porous carbon with high surface area, thus exhibiting promising electrochemical performance in supercapacitor applications. Indeed, the optimal CAS@Ni₃S₄/CeO₂-150 composite displayed a high specific capacitance of 1364 F g^?1 and impressive cycle performance with capacitance retention of 93.81 % after 10,000 cycles. The calculation of capacitance contribution showed that the satisfying behavior of the electrode was a combination of the diffusion process and the surface capacitance characteristics. Furthermore, the assembled asymmetric supercapacitor (CAS@Ni₃S₄/CeO₂-150//CAS) delivered an ultrahigh energy density of 102.76 Wh kg^?1, which was better than that of the commercial activated carbon-based ASC device. This novel strategy might provide a new perspective for transition metal sulfide/rare earth metal oxide composite in the electrochemical energy storage field.     

Electrospun porous MnMoO<Subscript>4</Subscript> nanotubes as high-performance electrodes for asymmetric supercapacitors

MnMoO₄ nanotubes of diameter about 120 nm were successfully synthesized by a single-spinneret electrospinning technique followed by calcination in air, and their structural, morphological, and electrochemical properties were studied with the aim to fabricate high-performance supercapacitor devices. The obtained MnMoO₄ nanotubes display a 1D architecture with a porous structure and hollow interiors. Benefiting from intriguing structural features, the unique MnMoO₄ nanotube electrodes exhibit a high specific capacitance, excellent rate capability, and cycling stability. As an example, the tube-like MnMoO₄ delivers a specific capacitance of 620 F g^?1 at a current density of 1 A g^?1, and 460 F g^?1 even at a very high current density of 60 A g^?1. Remarkably, almost no decay in specific capacitance is found after continuous charge/discharge cycling for 10,000 cycles at 1 A g^?1. An asymmetric supercapacitor fabricated from this MnMoO₄ nanotubes and activated carbon displayed a maximum high energy density of 31.7 Wh kg^?1 and a power density of 797 W kg^?1, demonstrating a good prospect for practical applications in energy storage electronics.     

The loading of polyoxometalates compound on a biomass derived N-doped mesoporous carbon matrix,a composite material for electrical energy storage

Abstract

A polyoxometalate (POM)-based composite material (NiPW₁₂NP/NMC) was synthesized, in which the nanoparticle of a POM compound (NiPW₁₂NP) distributes on orange juice derived nitrogen doped mesoporous carbon matrix (NMC) homogenously. When employed as a cathode material, NiPW₁₂NP/NMC exhibits high specific capacitance, remarkable rate capability and long-term stability. When the current density is 4?A·g^?1, a specific capacitance as high as 547 F·g^?1 is achieved by NiPW₁₂NP/NMC. With NiPW₁₂NP/NMC serving as cathode and MnO₂ acting as anode, a high performance asymmetric supercapacitor is assembled, which possesses a high energy density of 10.88?Wh·kg^?1 at 0.64?kW·kg^?1. It also shows a good rate capability, when the current density increases from 4 to 12?A·g^?1, its specific capacitance decreases from 113 to 88 F·g^?1, with 77.9% capacitance retention. After 5000 cycles charge-discharge experiments, 92.8% of its capacitance can be maintained, which exhibits good stability.     

高性能NiCoP基超级电容器电化学性能

采用水热和低温磷化反应两步法,在无添加沉淀剂条件下成功在泡沫镍上合成纳米花状镍钴磷化物(NiCoP/NF)。研究结果表明,镍/钴元素物质的量之比为1∶1时,在1 A·g~(-1)电流密度下,Ni_(1/2)Co_(1/2)P/NF的比容量高达1 276.36 F·g~(-1),在10 A·g~(-1)电流密度下充放电循环3 000次后,比容量保持率为78.23%。此外,以Ni_(1/2)Co_(1/2)P/NF为正极,活性炭(AC)为负极组装的非对称超级电容器(Ni_(1/2)Co_(1/2)P/NF//AC/NF)在725 W·kg~(-1)的功率密度下,能量密度高达36.25 Wh·kg~(-1)。     

KOH direct treatment of kombucha and in situ activation to prepare hierarchical porous carbon for high-performance supercapacitor electrodes

Kombucha, a renewable biomass, has been successfully utilized as an accessible carbon source to fabricate kombucha-derived hierarchical porous carbon (KHPC) by KOH direct treatment and in situ activation. The prepared KHPC shows an interconnected hierarchical porous structure, a pore volume of 0.41 cm³ g^?1, and a specific surface area of 917 m² g^?1. Due to the multiple synergistic effects of these advantages, the KHPC-3 exhibits a high specific capacitance of 326 F g^?1 at a current density of 1 A g^?1 in 6 M KOH, good rate capability of 82% retention from 1 to 20 A g^?1, and cycling performance with 91.3% retention over 5000 cycles. Moreover, the KHPC-3 symmetric supercapacitor reveals a good energy density of 20.97 Wh kg^?1 at a power density of 871.2 W kg^?1 and retains 8.08 Wh kg^?1 at 6330 W kg^?1 in 1 M Na₂SO₄ electrolyte. Therefore, the KHPC obtained via the simple synthesis process shows great promise as an electrode material in energy storage devices.     

Mesopore-dominant porous carbon derived from bio-tars as an electrode material for high-performance supercapacitors

For the first time, toxic bio-tars collected from the gasification of pine sawdust are used as the precursor for activated carbons. Various types of activation agents including KOH, K₂CO₃, H₃PO₄ and ZnCl₂ were screened for obtaining superior activated carbons. When KOH was used as an activation agent, the obtained activated carbons exhibited high specific surface area and large mesopore volume. The activated carbons were further employed to be the electrode material of supercapacitors, and its specific capacitance reached up to 260 F g^?1 at 0.25 A g^?1 current density. Also, it showed an excellent rate performance from preserving a relatively high specific capacitance of 151 F g^?1 at 50 A g^?1. The assembled device also exhibited the good electrochemical stability with the capacity retention of 90% after 5000 cycles. Furthermore, the maximum energy density of the activated carbons in organic electrolyte reached 17.8 Wh kg^?1.     

Perovskite SrCo0.9Nb0.1O3−δ as an Anion‐Intercalated Electrode Material for Supercapacitors with Ultrahigh Volumetric Energy Density

We have synthesized and characterized perovskite‐type SrCo_0.9Nb_0.1O_3−δ (SCN) as a novel anion‐intercalated electrode material for supercapacitors in an aqueous KOH electrolyte, demonstrating a very high volumetric capacitance of about 2034.6 F cm⁻³ (and gravimetric capacitance of ca. 773.6 F g⁻¹) at a current density of 0.5 A g⁻¹ while maintaining excellent cycling stability with a capacity retention of 95.7 % after 3000 cycles. When coupled with an activated carbon (AC) electrode, the SCN/AC asymmetric supercapacitor delivered a specific energy density as high as 37.6 Wh kg⁻¹ with robust long‐term stability.     

Fluorine‐Doped Fe2O3 as High Energy Density Electroactive Material for Hybrid Supercapacitor Applications

Nanostructured α‐Fe₂O₃ with and without fluorine substitution were successfully obtained by a green route, that is, microwave irradiation. The hematite phase materials were evaluated as a high‐performance electrode material in a hybrid supercapacitor configuration along with activated carbon (AC). The presence of fluorine was confirmed through X‐ray photoelectron spectroscopy and transmission electron microscopy. Fluorine‐doped Fe₂O₃ (F‐Fe₂O₃) exhibits an enhanced pseudocapacitive performance compared to that of the bare hematite phase. The F‐Fe₂O₃/AC cell delivered a specific capacitance of 71 F g^?1 at a current density of 2.25 A g^?1 and retained approximately 90 % of its initial capacitance after 15 000 cycles. Furthermore, the F‐Fe₂O₃/AC cell showed a very high energy density of about 28 W h kg^?1 compared to bare hematite phase (～9 W h kg^?1). These data clearly reveal that the electrochemical performance of Fe₂O₃ can be improved by fluorine doping, thereby dramatically improving the energy density of the system.     

Controllable Synthesis of NiCo LDH Nanosheets for Fabrication of High‐Performance Supercapacitor Electrodes

A unipolar pulse electrodeposition method was employed to controllably synthesize nanosheet type NiCo LDH. The effect of concentration rate of Ni(NO₃)₂/Co(NO₃)₂ preparation solution on crystalline structure, morphology and supercapacitive performance was investigated systematically. Experimental found that the morphology and composition of NiCo LDH was highly depend on the Ni²⁺/Co²⁺ molar ratios of preparation solution; and the obtained Ni_0.76Co_0.24 LDH materials showed small nanosheet size and uniform distribution on carbon fiber electrode. Ni_0.76Co_0.24 LDH electrode was evaluated for supercapacitor application, which revealed a high specific capacitances of 2189.8 and 1908.8 F g⁻¹ at the current density of 1 and 30 A g⁻¹ respectively and a good cycle stability, retaining 70.3 % of the initial capacitance after 20000 charge and discharge cycles at 50 A g⁻¹. Moreover, the Ni_0.76Co_0.24 LDH electrode exhibits a high energy density of 76 Wh Kg⁻¹ at a power density of 250 W Kg⁻¹ and a high power density of 7500 W Kg⁻¹ at energy density of 66 Wh Kg⁻¹. The as‐prepared Ni_0.76Co_0.24 LDH as positive electrode for asymmetric supercapacitor exhibits excellent energy density of 4.1 Wh Kg^‐1 at a power density of 4000 W Kg^‐1     

Mixed Cu2Se Hexagonal Nanosheets@Co3Se4 Nanospheres for High-Performance Asymmetric Supercapacitors

Rational designing and constructing multiphase hybrid electrode materials is an effective method to compensate for the performance defects of the single component. Based on this strategy, Cu₂Se hexagonal nanosheets@Co₃Se₄ nanospheres mixed structures have been fabricated by a facile two-step hydrothermal method. Under the synergistic effect of the high ionic conductivity of Cu₂Se and the remarkable cycling stability of Co₃Se₄, Cu₂Se@Co₃Se₄ can exhibit outstanding electrochemical performance as a novel electrode material. The as-prepared Cu₂Se@Co₃Se₄ electrode displays high specific capacitance of 1005 F g⁻¹ at 1 A g⁻¹ with enhanced rate capability (56 % capacitance retention at 10 A g⁻¹), and ultralong lifespan (94.2 % after 10 000 cycles at 20 A g⁻¹). An asymmetric supercapacitor is assembled applying the Cu₂Se@Co₃Se₄ as anode and graphene as cathode, which delivers a wide work potential window of 1.6 V, high energy density (30.9 Wh kg⁻¹ at 0.74 kW kg⁻¹), high power density (21.0 Wh kg⁻¹ at 7.50 kW kg⁻¹), and excellent cycling stability (85.8 % after 10 000 cycles at 10 A g⁻¹).     

ZIFs骨架型双壳层纳米笼状CoS/NiCo2S4的制备及其电化学性能

采用离子刻蚀和化学气相沉积法制备出具有沸石咪唑酯骨架(ZIFs)型双壳层纳米笼状的CoS/NiCo_2S_4并组装成超级电容器。该结构有较大的比表面积(98 m2·g-1),合适的孔道(孔径4 nm),且保留了ZIFs骨架构型。作为电极活性材料时,具有良好的结构稳定性和电化学活性,有利于增强所组装的超级电容器的循环稳定性和比容量。在三电极体系中,在1 A·g-1的电流密度下,容量为1 230 F·g-1;在3 A·g-1电流密度下循环9 000圈后,初始电容保持率为76.6%。在以该电极、活性炭电极与KOH/聚乙烯醇(PVA)凝胶态电解质组装的器件中,当功率密度为702 W·kg-1时,能量密度达31.6 Wh·kg-1;在7 056 W·kg-1的高功率密度下,仍保持16.5 Wh·kg-1的能量密度。