Reductive carbonylation of nitrobenzene over Pd/Fe/I2/Py and Pd/C/Fe/I2/Py catalytic systems

A simple catalytic system containing metallic palladium, iron and iodine has been shown to be very active in the carbonylation of nitrobenzene to carbamate. The influence of the components of the catalytic system studied on its selectivity and activity has been established. It has been found that the catalytic activity of palladium supported on carbon (using both lignite coal and bituminous coal) was not lower than the activity of metallic palladium. This revised version was published online in August 2006 with corrections to the Cover Date.     

Zr1-xMxWMoO8-x/2和Zr1-xMxW2O8-x/2固溶体的晶胞参数与晶格畸变的关系

合成了Zr1-xMxWMoO8-x/2(M=Er,Tm,Yb,Sc,In,Ga,Al)和Zr1-xMxW2O8-x/2(M=Eu,Er,Yb,Sc,In,Ga,Al)2个系列的固溶体,前者具有β-ZrW2O8结构类型(简称β相);后者具有α-ZrW2O8结构类型(简称α相)。建立了相和相的晶胞参数与M3+离子浓度的Vegard方程,测定了上述固溶体的固溶度。讨论了M3+离子的化学性质与Vegard斜率SV的关系。分析了α相的SαA与β相的SβA的关系;揭示了α-Zr1-xMxW2O8-x/2晶格中2[WO4]四面体对的取向有序程度对晶格畸变的贡献。提出上述固溶体的晶胞参数随溶质浓度增加而减小,主要是由于氧空位缺陷相互作用的结果。     

Separation of Th/IV/ and U/VI/ by extraction chromatography

Application of extraction chromatographic technique to the analytical separation of Th/IV/ and U/VI/ has been investigated. The stationary phase was a macroporous resin Amberlite XE-270 impregnated with undiluted trin-n-butylphosphate /TBP/ and the mobile phase was either 5.OM HNO₃ or 6M HCl. Separation of traces of Th/IV/ from large quantities of U/VI/ was achieved on a laboratory column by elution of the absorbed Th/IV/ with 6M HCl.     

A structural study of the perovskite series Ca1−xNaxTi1−xTaxO3

Compounds in the solid solution series Ca_1−xNa_xTi_1−xTa_xO₃ were synthesized at 1300 °C, followed by annealing at 850 °C or 800 °C with quenching and/or slow cooling to room temperature. Rietveld refinement of their powder X-ray diffraction patterns show that all compounds are single-phase ternary perovskites which adopt the space group Pbnm (a≈b≈√2a_p; c≈2a_p; Z=4) at ambient conditions. The unit cell parameters and cell volumes of the compounds increase regularly with increasing values of x. The coordination of the A-site cations changes throughout the series from eight for CaTiO₃ to nine for NaTaO₃. Compounds with 0?x ?0.4 have A-site cations in eight fold coordination, whereas the coordination of those with 0.4<x<0.9 is ambiguous. Analysis of the crystal chemistry of the compounds shows that the change in coordination at x=0.4 is related to the departure of the B-site cations from the second coordination sphere of the A-site cations, as in compounds with x>0.4 the A-^IIO distances become less than the A-B intercation distances. Contemporaneous with these coordination changes, the tilt angles of the BO₆ polyhedra decrease with increasing values of x. This solid solution series is unusual in that these structural and coordination changes occur regardless that Goldschmidt tolerance factors remain essentially constant at approximately 0.89, and observed tolerance factors, assuming eight fold coordination of the A-site cations, range only from 0.91 to 0.93 (0?x?0.8).     

Stability constants of complexes of uranium/VI/ and plutonium/VI/ with succinate ions

The stability constants of the complexes formed by U/VI/ and Pu/VI/ with succinate ions were determined in 0.5M NaClO₄ medium at 30°C following the Bjerrum-Calvin pH titration technique. The stability constants obtained agreed with values reported in literature following the same technique. The values for the second complexes were reported for the first time. U/VI/ complexes were found to have stabilities higher than the corresponding Pu/VI/ complexes in accordance with the acidities of the cations.     

Defect structure of Sb2−xMnxTe3 single crystals

Incorporation of the transition metal elements in the tetradymite structure of Sb₂Te₃ has a strong influence on electronic properties. Recent studies have indicated that Mn substitutes on the Sb sublattice increases the carrier concentration of holes. However, the doping efficiency of Mn appears rather low in comparison to what it should be based on the measurements of magnetization, structural analysis, and transport properties. In this paper we address this issue by making detailed studies of the Hall effect and electrical resistivity and we explain the results with the aid of a model that takes into account interactions of the Mn impurity with the native defects in antimony telluride. Specifically, we find that Mn atoms interact with antisite defects (antimony atoms located on the tellurium sublattice), a process that decreases the density of antisite centers and generates free electrons. These, in turn, recombine with holes and thus decrease their concentration and the apparent Mn doping efficiency.     

Aqueous synthesis of glutathione-capped CdTe/CdS/ZnS and CdTe/CdSe/ZnS core/shell/shell nanocrystal heterostructures

Here we demonstrate the aqueous synthesis of colloidal nanocrystal heterostructures consisting of the CdTe core encapsulated by CdS/ZnS or CdSe/ZnS shells using glutathione (GSH), a tripeptide, as the capping ligand. The inner CdTe/CdS and CdTe/CdSe heterostructures have type-I, quasi-type-II, or type-II band offsets depending on the core size and shell thickness, and the outer CdS/ZnS and CdSe/ZnS structures have type-I band offsets. The emission maxima of the assembled heterostructures were found to be dependent on the CdTe core size, with a wider range of spectral tunability observed for the smaller cores. Because of encapsulation effects, the formation of successive shells resulted in a considerable increase in the photoluminescence quantum yield; however, identifying optimal shell thicknesses was required to achieve the maximum quantum yield. Photoluminescence lifetime measurements revealed that the decrease in the quantum yield of thick-shell nanocrystals was caused by a substantial decrease in the radiative rate constant. By tuning the diameter of the core and the thickness of each shell, a broad range of high quantum yield (up to 45%) nanocrystal heterostructures with emission ranging from visible to NIR wavelengths (500-730 nm) were obtained. This versatile route to engineering the optical properties of nanocrystal heterostructures will provide new opportunities for applications in bioimaging and biolabeling.     

纳米钙钛矿LaxSr1-xFe1-yCoyO3复合氧化物的制备和表征

用甘氨酸-硝酸盐燃烧合成法，制备La_xSr_1-xFe_1-yCo_yO₃复合氧化物的陶瓷粉末，对该钙钛矿型氧化物进行了XRD、IR、紫外漫反射光谱及循环伏安曲线分析。结果表明：该复合氧化物粉体平均晶粒为15.3～29.8 nm,为立方和正交晶系。该氧电极具有双功能催化特性，但不完全可逆。对水溶液染料进行光解实验，利用紫外-可见、人工神经网络光度法研究La_xSr_1-xFe_1-yCo_yO₃的催化性能。结果表明：CO²⁺的加入可使La_xSr_1-xFeO₃的光催化活性有所提高，B位离子(Fe³⁺，CO²⁺)改变与加入，使La_xSr_1-xFe_1-yCo_yO₃(x=0.7，0.3；y=0.3，0.9，1)光催化活性高于La_xSr_1-xFeO₃。同时，对5种染料进行紫外光解，在0.75 h，脱色率大于91%，并为动力学一级反应。     

Effect of composition on structural and magnetic properties of nanocrystalline Ni0.8−xZn0.2MgxFe2O4 ferrite

Nanocrystalline magnetic particles of Ni_0.8−xZn_0.2Mg_xFe₂O₄ ferrites with x lying between 0.0 and 0.8 were synthesized using metal nitrates and freshly extracted egg-white. The synthesized powders were characterized using X-ray diffraction (XRD), Fourier transform infrared (FT-IR) and transmission electron microscopy (TEM). With increasing magnesium concentration, the lattice constant increases while X-ray density decreases. The average crystallite size determined from XRD data using Scherrer formula lie in the range of 35–59 nm. TEM image shows spherically agglomerated particles with average crystallite size agreed well with that obtained from XRD. Magnetic properties measured at room temperature by vibrating sample magnetometer (VSM) reveal a decrease in saturation magnetization up to Mg content of 0.6. In agreement with FT-IR results, the unexpected increase in the magnetization at Mg content of 0.8 can be attributed to the tendency of Mg²⁺ ions to occupy the tetrahedral site. The decrease in the value of coercivity with increasing magnesium content can be explained based on the magneto-crystalline anisotropy.     

Synthesis and characterization of Ti1−2xNbxNixO2−x/2 solid solutions

Doped-rutile has been traditionally used in ceramic pigments for its intense optical properties. In this paper, we compare the classical ceramic synthesis of Ti_1−2xNb_xNi_xO_2−x/2 system with the sol-gel methodology, which allows a reduction of the anatase-rutile transformation temperature. The composition was optimised in order to obtain a unique rutile phase with the minimum amount of pollutant Ni(II) and enhanced chromatic coordinates. Incorporation of the doping ions in the rutile structure was corroborated by XRD and Rietveld refinements. The species responsible for the colour mechanism were studied by different techniques. UV-VIS spectroscopy showed the characteristic features of Ni²⁺ ions, whose existence was corroborated by EPR and magnetic measurements. From these results, (Ni,Nb)doped-TiO₂ powder samples can be now shaped as thin films, monoliths, etc. by using sol-gel methodology without modifying their properties. This study introduces new possibilities of coloured TiO₂-based solid solutions in new combined advanced applications (colouring agent and photocatalyst, etc.).     

Electronic and magnetic properties of LaNi1−xCoxO3, LaCo1−xFexO3 and LaNi1−xFexO3

LaNi_1?xCo_xO₃ shows itinerant d-electron behavior similar to LaNiO₃ up to x = 0.5. In the range 0.5 < x < 1.0, the cobalt spin state equilibrium is markedly affected; the localized-itinerant electron transition of LaCoO₃ is not seen when x < 0.95. In LaCo_1?xFe_xO₃, itinerancy of d-electrons decreases with increase in x and the compositions with x > 0.5 are similar to LaFeO₃. If x > 0.1, the localized-itinerant electron transition is not seen and the cobalt spin state equilibrium is considerably altered. In LaNi_1?xFe_xO₃, itinerancy decreases with increase in x. These observations can be satisfactorily explained in terms of Goodenough's energy band schemes.     

Solution precursor synthesis and magnetic properties of Eu1−xCaxTiO3

Europium titanate, EuTiO₃, is a paraelectric/antiferromagnetic cubic perovskite with T_N=5.5 K. It is predicted that compressive strain could induce simultaneous ferroelectricity and ferromagnetism in this material, leading to multiferroic behavior. As an alternative to epitaxial strain, we explored lattice contraction via chemical substitution of Eu²⁺ with the smaller Ca²⁺ cation as a mechanism to tune the magnetic properties of EuTiO₃. A modified sol-gel process was used to form homogeneously mixed precursors containing Eu³⁺, Ca²⁺, and Ti⁴⁺, and reductive annealing was used to transform these precursors into crystalline powders of Eu_1−xCa_xTiO₃ with x=0.00, 0.05, 0.10, 0.15, 0.25, 0.35, 0.50, 0.55, 0.60, 0.65, 0.80, and 1.00. Powder XRD data indicated that a continuous Eu_1−xCa_xTiO₃ solid solution was readily accessible, and the lattice constants agreed well with those predicted by Vegard's law. SEM imaging and EDS element mapping indicated a homogeneous distribution of Eu, Ca, and Ti throughout the polycrystalline sample, and the actual Eu:Ca ratio agreed well with the nominal stoichiometry. Measurements of magnetic susceptibility vs. temperature indicated antiferromagnetic ordering in samples with x≤0.60, with T_N decreasing from 5.4 K in EuTiO₃ to 2.6 K in Eu_0.40Ca_0.60TiO₃. No antiferromagnetic ordering above 1.8 K was detected in samples with x>0.60.     

Properties of compounds of type NaxSi46 and NaxSi136

A qualitative account is given of the electrical and magnetic properties of compounds of the type Na_xSi₁₃₆. It is suggested that a metal-insulator transition takes place with decreasing x. It is conjectured that in sintered powders the resistance is due to amorphous contacts between grains, leading to a resistivity proportional to $\text{A}\text{T}{}^{\mathrm{<mtext>1</mtext><mtext>4</mtext>}}$.     

CnSH±与CnS±2的碰撞诱导解离研究

On a home-made crossed ion-molecular beam tandem time-of-flight mass spectrometer, carbon cluster ions with two hetero-atoms, CnSH± and CnS2±, were produced from laser ablation, mass-selected, and collided with pulsed nitrogen beam. From mass analysis of the fragment ions, structures of the cluster ions were characterized as linear, with two hetero-atoms locating on both ends of the carbon chain. The experimental results also revealed the main dissociation channel of the cluster ions. According to the results, for most cluster ions studied in the experiment, the weakest bond is the C-C bond next to the sulfur atom, but in some smaller cluster ions, S-C bond is easier to break. Under the experimental condition, cluster ions may suffer multiple collisions, so fragment ions produced from stepwise dissociation process were observed.     

Structural characterisation of the perovskite series SrxCa1−x−yNdyMnO3: Influence of the Jahn-Teller effect

The crystal structures of the perovskite manganites Sr_xCa_1−x−yNd_yMnO₃ with y=0.1 or 0.2 have been investigated using synchrotron X-ray powder diffraction. At room temperature the structures change from depending on the cation distribution, the different structures exhibiting different tilts of the MnO₆ octahedra. High temperature diffraction measurements demonstrate the presence of, an apparently continuous, isosymmetric I4/mcm to I4/mcm phase transition associated with the removal of long range orbital ordering. Heating the manganites to still higher temperatures results in a continuous transition to the cubic structure. A feature of such transitions is the continuous evolution of the octahedral tilt angle through the I4/mcm to I4/mcm phase transition. The orthorhombic structures do not exhibit orbital ordering and although a first order transition to the tetragonal structure is observed in Sr_0.4Ca_0.5Nd_0.1MnO₃, this high temperature tetragonal structure does not exhibit orbital ordering.     

Structural characterization and physical properties of the system La1.33LixCrxTi2−xO6

New phases which arise from partial substitution of Ti⁴⁺ by Cr³⁺ and Li⁺ of the compound La_2/3TiO₃ have been obtained, giving rise to the series La_1.33Li_xCr_xTi_2−xO₆ (x=0.66, 0.55 and 0.44). These phases adopt a perovskite-type structure as deduced from their structural characterization. Rietveld's analyses of neutron diffraction data show that it is orthorhombic (S.G. Pbnm) with ordered domains. Conductivity has been examined by complex impedance spectroscopy and it increases with increasing lithium and chromium content. These materials behave as mixed conductors with low activation energies. Magnetic susceptibility variation with temperature shows antiferromagnetic interactions at the lowest temperatures.     

Magnetic and thermoelectric properties of layered LixNayCoO2

The magnetic, thermoelectric, and structural properties of Li_xNa_yCoO₂, prepared by intercalation and deintercalation chemistry from the thermodynamically stable phase Li_0.41Na_0.31CoO₂, which has an alternating Li/Na sequence along the c-axis, are reported. For the high Li-Na content phases Li_0.41Na_0.31CoO₂ and Li_0.40Na_0.43CoO₂, a sudden increase in susceptibility is seen below 50 K, whereas for Li_0.21Na_0.14CoO₂ an antiferromagnetic-like transition is seen at 10 K, in spite of a change from dominantly antiferromagnetic to dominantly ferromagnetic interactions with decreasing alkali content. The Curie constant decreases linearly with decreasing alkali content, at the same time the temperature-independent contribution to the susceptibility increases, indicating that as the Co becomes more oxidized the electronic states become more delocalized. Consistent with this observation, the low alkali containing phases have metallic-like resistivities. The 300 K thermopowers fall between 30 μV/K (x+y=0.31) and 150 μV/K (x+y=0.83).     

Water-containing derivative phases of the Srn+1FenO3n+1 series

The n=1, 2, 3 and ∞ members of the homologous series Sr_n+1Fe_nO_3n+1 of layered iron oxides are investigated for their tendency to accept additional layers of water in their crystals. The phases possess a Ruddlesden-Popper-type SrO-(SrO-FeO₂)_n crystal structure, where the n=∞ limit is nothing but the perovskite structure. It is revealed that the n=1, 2 and 3 phases readily accommodate one or two layers of water between adjacent SrO layers, whereas the n=∞ member which lacks the SrO-SrO double-layer unit remains intact in the presence of water. The speed of the water intercalation process is found to decrease with increasing n. Among the layered water derivatives, the n=2 phase with two water molecules per formula unit, i.e. Sr₃Fe₂O₇·2H₂O, was found to be most stable.     

Electrical properties and sulfur tolerance of La0.75Sr0.25Cr1−xMnxO3 under anodic conditions

Complex metal oxides with composition of La_0.75Sr_0.25Cr_1−xMn_xO₃(x=0.4,0.5,0.6) (LSCM) have been synthesized and examined as anode materials for solid oxide fuel cells (SOFCs). LSCM compositions show excellent tolerance to both reduction and oxidation but the crystal structure transforms from hexagonal in air to orthorhombic in H₂. The volume change associated with this phase transformation is only about 1%, thus having little effect on other properties. The total electrical conductivity increases with the content of Mn, whereas the resistance to sulfur poisoning increases with the content of Cr. Fuel cells using LSCM as the anode show very good performance when pure hydrogen is used as the fuel. However, they do not appear to be stable in fuels containing 10% of H₂S.     

Thermochemistry of Li1+xMn2−xO4 (0?x?1/3) spinel

Lithium substituted Li_1+xMn_2−xO₄ spinel samples in the entire solid solution range (0?x?1/3) were synthesized by solid-state reaction. The samples with x<0.25 are stoichiometric and those with x?0.25 are oxygen deficient. High-temperature oxide melt solution calorimetry in molten 3Na₂O·4MoO₃ at 974 K was performed to determine their enthalpies of formation from constituent binary oxides at 298 K. The cubic lattice parameter was determined from least-squares fitting of powder XRD data. The variations of the enthalpy of formation from oxides and the lattice parameter with x follow similar trends. The enthalpy of formation from oxides becomes more exothermic with x for stoichiometric compounds (x<0.25) and deviates endothermically from this trend for oxygen-deficient samples (x?0.25). This energetic trend is related to two competing substitution mechanisms of lithium for manganese (oxidation of Mn³⁺ to Mn⁴⁺ versus formation of oxygen vacancies). For stoichiometric spinels, the oxidation of Mn³⁺ to Mn⁴⁺ is dominant, whereas for oxygen-deficient compounds both mechanisms are operative. The endothermic deviation is ascribed to the large endothermic enthalpy of reduction.