Heterometallic cluster complexes (RhMo, RhW) containing bridging 1,2-dicarba-closo-dodecaborane-1,2-dichalocogenolato ligands

The 16-electron half-sandwich rhodium complex [Cp*Rh{E2C2(B10H10)}] [Cp* = eta5-C5Me5, E = S (1a), Se (1b)] [Cp*Rh{E2C2(B10H10)} = eta5-pentamethylcyclopentadienyl[1,2-dicarba-closo-dodecaborane(12)-dichalcogenolato]rhodium] reacted with Mo(CO)3(py)3 in the presence of BF3.Et2O in THF solution to afford the {Cp*Rh[E2C2(B10H10)]}2Mo(CO)2 (E = S (3a); Se (3b)), {Cp*Rh[S2C2(B10H10)]}{Mo(CO)2[S2C2(B10H10)]} (4). The voluminous di-tert-butyl substituted Cp half-sandwich rhodium complex [Cp'Rh{E2C2(B10H10)}] [E = S (2a), Se (2b)] [CpRh{E2C2(B10H10)} = eta5-(1,3-di(tert-butyl)cyclopentadienyl-[1,2-dicarba-closo-dodecaborane(12)-dichalcogenolato]rhodium) reacted with W(CO)3(py)3 in the presence of BF3.Et2O in THF solution to give the {Cp'Rh[S2C2(B10H10)]}{W(CO)2[S2C2(B10H10)]} (5) and {Cp'Rh[Se2C2(B10H10)]}(mu-CO)[W(CO)3] (6), respectively. The complexes have been fully characterized by IR and NMR spectroscopy as well as by elemental analyses. The X-ray crystal structures of the complexes 3-6 are reported.     

Construction of trinuclear iridium clusters through ancillary ortho-carborane-1,2-diselenolato ligands, with simultaneous iridium-induced B-H activation

The reaction of the 16-electron "pseudo-aromatic" complex Cp*Ir[Se2C2(B10H10)] (1, Cp* = eta5-C5Me5) with [Ir(cod)(micro-OC2H5)]2 leads to the trinuclear iridium complexes {(cod)Ir[Se2C2(B10H8)(OC2H5)]}Ir{[Se2C2(B10H10)]IrCp*} (2), {(cod)Ir[Se2C2(B10H8)(OC2H5)]}Ir{[Se2C2(B10H9)]IrCp*} (3), {Cp*Ir[Se2C2(B10H9)]}{IrSe(2)[C2(B10H9)(OC2H5)]}{[Se2C2(B10H10)] IrCp*} (4) and one mononuclear complex Cp*Ir[Se2C2(B10H8)(OC2H5)(2)] (5). The reactivity of 2 was investigated and revealed that transformation from 2 to 3 occurred thermally in solution. The transoid complex 2 (with the carborane diselenolato units in trans position) can be converted in nearly 90% yield to the cisoid complex 3. In complexes 2, 3, two diselenolato carborane ligands bridge the Ir(3) core, which consists of Ir-Ir metal bonds. Compared with transoid 2, the cisoid 3 contains two iridium-boron bonds. Complex 4 consists of three different coordination environment carborane ligands (Ir-B(cluster): {Cp*Ir[Se2C2(B10H9)]}, O-B(cluster): {[Se2C2(B10H9)](OC2H5)}, and intact carborane: {Cp*Ir[Se2C2 (B10H10)]}) without the presence of a metal-metal bond. Analogous reaction of 1 with [Ir(cod)(micro-OCH(3))](2) results in formation of the trinuclear complex {Cp*Ir[Se2C2(B10H9)]}{IrSe(2)[C2(B10H9)(OCH3)]}{[Se2C2(B10H10)]IrCp*} (6) and mononuclear complex Cp*Ir[Se2C2(B10H8)(OCH3)(2)] (7). The structures of 2, 3, 4, 5, 6 and 7 have been determined by crystallographic studies.     

Synthesis and characterization of heterometallic clusters (Ir2Rh, Ir2W, Rh3) Containing 1,2-dicarba-closo-dodecaborane(12)-1,2-dithiolate chelate ligands, [(B10H10)C2S2]2-

The 16-electron half-sandwich complex [Cp*Ir[S2C2(B10H10)]] (Cp* = eta5-C5Me5) (1a) reacts with [[Rh(cod)(mu-Cl)]2] (cod = cycloocta-1,5-diene, C8H12) in different molar ratios to give three products, [[Cp*Ir[S2C2(B10H9)]]Rh(cod)] (2), trans-[[Cp*Ir[S2C2(B10H9)]]Rh[[S2C2(B10H10)]IrCp*]] (3), and [Rh2(cod)2[(mu-SH)(mu-SC)(CH)(B10H10)]] (4). Complex 3 contains an Ir2Rh backbone with two different Ir-Rh bonds (3.003(3) and 2.685(3) angstroms). The dinuclear complex 2 reacts with the mononuclear 16-electron complex 1a to give 3 in refluxing toluene. Reaction of 1a with [W(CO)3(py)3] (py = C5H5N) in the presence of BF3.EtO2 leads to the trinuclear cluster [[Cp*Ir[S2C2(B10H10)]]2W(CO)2] (5) together with [[Cp*Ir(CO)[S2C2(B10H10)]]W(CO)5] (6), and [Cp*Ir(CO)[S2C2(B10H10)]] (7). Analogous reactions of [Cp*Rh[S2C2(B10H10)]] (1 b) with [[Rh(cod)(mu-Cl)]2] were investigated and two complexes cis-[[Cp*Rh[S2C2(B10H10)]]2Rh] (8) and trans-[[Cp*Rh[S2C2(B10H10)]]2Rh] (9) were obtained. In refluxing THF solution, the cisoid 8 is converted in more than 95 % yield to the transoid 9. All new complexes 2-9 were characterized by NMR spectroscopy (1H, 11B NMR) and X-ray diffraction structural analyses are reported for complexes 2-5, 8, and 9.     

Synthesis and characterization of binuclear half-sandwich metal (Co, Ir and Ru) complexes containing ancillary ortho-carborane-1,2-dithiolato ligands

The assembly of soluble, air-stable, binuclear structures, namely {(p-cymene)Ru[S(2)C(2)(B(10)H(10))]}(2)(micro-pyz), {Cp*Co[S(2)C(2)(B(10)H(10))]}(2)(micro-pyz), {Cp*Co[S(2)C(2)(B(10)H(10))]}(2)(micro-bpy), {Cp*Co[S(2)C(2)(B(10)H(10))]}(2)(micro-bpe) and {Cp*Ir[E(2)C(2)(B(10)H(10))]}(2)(micro-bpo) (E = S (), Se), in which organometallic units are bridged by pyridyl-based organic linkers, are synthesized. The complexes have been fully characterized by IR and NMR spectroscopy, as well as elemental analysis. The molecular structures are established through X-ray crystallography.     

Yttrium and erbium halide complexes with [{Ti(eta5-C5Me5)(mu-NH)}3(mu3-N)] as a neutral tridentate ligand

Treatment of [{TiCp*(mu-NH)} 3(mu 3-N)] ( 1; Cp* = eta (5)-C 5Me 5) with yttrium and erbium halide complexes [MCl 3(THF) 3.5] and [MCpCl 2(THF) 3] (Cp = eta (5)-C 5H 5) gives cube-type adducts [Cl 3M{(mu 3-NH) 3Ti 3Cp* 3(mu 3-N)}] and [CpCl 2M{(mu 3-NH) 3Ti 3Cp* 3(mu 3-N)}]. An analogous reaction of 1 with [{MCp 2Cl} 2] in toluene affords [Cp 3M(mu-Cl)ClCpM{(mu 3-NH) 3Ti 3Cp* 3(mu 3-N)}] (M = Y, Er).     

Pentamethylcyclopentadienyl-iridium(III) complexes with pyridylamino ligands: synthesis and applications as asymmetric catalysts for Diels-Alder reactions

Reaction of the dimer [(Cp*IrCl)2(P-Cl)2] with chiral pyridylamino ligands (pyam, L1-L5) in the presence of NaSbF6 gave complexes [Cp*IrCl(pyam)][SbF6] 1-5 as diastereomeric mixtures, which have been fully characterised, including the X-ray molecular structure determination of the complexes (S(Ir),R(N),R(C))-[Cp*IrClL1][SbF6] 1a and (R(Ir),S(N),S(C))-[Cp*IrClL5][SbF6] 5a. Treatment of these cations with AgSbF6 affords the corresponding aqua species [Cp*Ir(pyam)(H2O)][SbF6]2 6-10 which have been also fully characterised. The molecular structure of the complex (S(Ir),R(N),R(C))-[Cp*IrL,(H2O)][SbF6]2 6 has been determined by X-ray diffractometric methods. The aqua complexes [Cp*Ir(pyam)(H2O)][SbF6]2 (6, pyam = L2 (7), L3 (8)) evolve to the cyclometallated species [Cp*Ir{kappa3(N,N',C)-(R)-(C6H4)CH(CH3)NHCH2C5NH4}][SbF6] (11), [Cp*Ir{kappa3(N,N',C)-(R)-(C10H6)CH(CH3)-NHCH2C5NH4)}][SbF6] (12), and [Cp*Ir{kappa3(N,N',C)-(R)-(C10H6)CH(CH3)NHCH2C9NH6)}][SbF6] (13) respectively, via intramolecular activation of an ortho C-H aryl bond. Complexes 6-10 are enantioselective catalysts for the Diels-Alder reaction between methacrolein and cyclopentadiene. Reaction occurs rapidly at room temperature with good exo : endo selectivity (from 81 : 19 to 98 : 2) and moderate enantioselectivity (up to 72%). The involved intermediate Lewis acid-dienophile compounds [Cp*Ir(pyam)(methacrolein)][SbF]2 (pyam = L4 (14), L5 (15)) have been isolated and characterised.     

Fine-tuning of metallaborane geometries: chemistry of iridaboranes derived from the reaction of

From reaction of [(Cp*Ir)2HxCl(4-x)] (x=1, 0) and LiBH4, arachno-[[Cp*IrH2]B3H7](1) is produced in moderate yield concurrently with [Cp*IrH4]. In contrast, reaction of [(Cp*Ir)2H2Cl2] with LiBH4 results in arachno-[[Cp*IrH]2(mu-H)B2H5] (3) in high yield at room temperature but a mixture of 1 and [[Cp*IrH]2(mu-H)BH4] (2) at 0 degrees C. BH3 x THF converts 1 to arachno-[(Cp*IrHB4H9] (4) and 2 to 3 with 1 as a minor product. Further, reaction of 3 with excess of BH3 x THF results in formation of nido-[[Cp*Ir]2-(mu-H)B4H7] (6) formed by loss of H2 from the intermediate arachno-[[Cp*IrH]2B4H8] (5). Reaction of 1 with [Co2(CO)8] permits the isolation of two metallaboranes, arachno-[[Cp*Ir(CO)]-B3H7] (7) and nido-[1-[Cp*Ir]-2,3-Co2-(CO)4(mu-CO)B3H7] (8). Treatment of 4 with [Co2(CO)8] gives only one single mixed-metal metallaborane nido-[1-[Cp*Ir]-2-Co(CO)3B4H7 (9) in high yield. Finally, pyrolysis of 8 results in loss of hydrogen and formation of pileo-[1-[Cp*Ir]-2,3-Co2(CO)5B3H5] (10) with a BH-capped square-pyramidal structure. With kinetic control rational synthesis of a variety metallaboranes has been achieved by varying the number of chlorides in the monocyclopentadienylmetal halide dimer, reaction temperature, types of monoborane, and metal fragment sources.     

Synthesis and structure of heterometallic complexes (RhFe, CoFe) containing bridging 1,2-dicarba-closo-dodecarborane-1,2-dichalcogenolato ligands

The prototype hetero-binuclear complexes containing metal-metal bonds, {CpRh[E2C2(B10H10)]}[Fe(CO)3] (Cp = Cp* = eta 5-Me5C5, E = S(5a), Se(5b); Cp = Cp = eta 5-1,3-tBu2C5H3, E = S(6a), Se(6b)) and {CpCo[E2C2(B10H10)]}[Fe(CO)3] (Cp = Cp* = eta 5-Me5C5, E = S(7a), Se(7b); Cp = Cp = eta 5-C5H5, E = S(8a), Se(8b)) were obtained from the reactions of 16-electron complexes CpRh[E2C2(B10H10)] (Cp = Cp*, E = S(1a), Se(1b); Cp = Cp, E = S(2a), Se(2b)), CpCo[E2C2(B10H10)] (Cp = Cp*, E = S(3a), Se(3b); Cp = Cp, E = S(4a), Se(4b)) with Fe(CO)5 in the presence of Me3NO. The molecular structures of {Cp*Rh[E2C2(B10H10)]}[Fe(CO)3] (E = S(5a), Se(5b)), {CpRh[S2C2(B10H10)]}[Fe(CO)3] (6a) {Cp*Co[S2C2(B10H10)]}[Fe(CO)3] (7a) and {CpCo[S2C2(B10H10)]}[Fe(CO)3] (8a) have been determined by X-ray crystallography. All these complexes were characterized by elemental analysis and IR and NMR spectra.     

Tetrametallic clusters (Ir(2)Rh(2)) through an ancillary ortho-carborane-1,2-dichalcogenolato ligands

The tetrametallic cluster complexes {Cp*Ir[E(2)C(2)(B(10)H(9))]}Rh(2)(cod){Cp*Ir[E(2)C(2) (B(10)H(10))]} (E = S; Se) have been synthesized by reactions of the 16-electron half-sandwich iridium complexes [Cp*Ir{E(2)C(2)(B(10)H(10))}] [Cp* = eta(5)-C(5)Me(5), E = S, Se] with [Rh(cod)(micro-OEt)(2)] at room temperature in toluene solution. In the solid state, this tetrametallic cluster exhibits an irregular nearly planar metal skeleton with the two carborane dichalcogenolato ligands bridging the four metal centers from both sides of the tetrametallic plane. Even though all metal atoms coordinate bridging chalcogen atoms, they show different electronic and coordination environments. The molecular structures of and have been determined by X-ray crystallography.     

Approaches to trinuclear half-sandwich carbene complexes containing 1,2-dicarba-closo-dodecaboranes

The synthesis of trinuclear half-sandwich iridium and rhodium complexes containing both N-heterocyclic carbene (NHC) and 1,2-dicarba-closo-dodecaborane ligands is described. Complexes {Cp*M[E2C2(B10H10)]}3(L) (Cp*=pentamethylcyclopentadienyl; L=tris(2-(3-methylimidazol-2-ylidene)ethyl)amine; M=Ir (), Rh (); E=S (), Se ()) were obtained from the reactions of Cp*M[E2C2(B10H10)] (M=Ir (), Rh ()) with a silver-NHC precursor or from the reactions of [Cp*MCl2]3(L) (M=Ir (), Rh ()) with Li2E2C2(B10H10) (E=S, Se). The complexes were characterized by IR, NMR spectroscopy, elemental analysis. In addition, X-ray structure analyses were performed on complexes and .     

Selective reaction based on the linked diamido ligands of dinuclear lanthanide complexes

The dinuclear ytterbium pyridyl diamido complexes [Cp(2)Yb(THF)](2)[mu-eta(1):eta(2)-(NH)(2)(C(5)H(3)N-2,6)] (1a) and [Cp(2)Yb(THF)](2)[mu-eta(1):eta(2)-(NH)(2)(C(5)H(3)N-2,3)] (1b) are easily prepared by protonolysis of Cp(3)Yb with 0.5 equiv of the corresponding diaminopyridine in accepted yields, respectively. Treatment of 1a with 2 equiv of dicyclohexylcarbodiimide (CyN=C=NCy) in THF at low temperature leads to the isolation of the formal double N-H addition product (Cp(2)Yb)(2)[mu-eta(2):eta(2)-(CyN(CyNH)CN)(2)(C(5)H(3)N-2,6)] (2) in 42% yield. Compound 2 is unstable to heat and slowly isomerized to the mixed neutral/dianionic diguanidinate complex (Cp(2)Yb)(2)[mu-eta(2):eta(2)-(CyNH)(2)CN(C(5)H(3)N-2,6)NC(NCy)(2)](THF) (3) at room temperature. Similarly, treatment of 1b with 2 equiv of CyN=C=NCy gives the addition/ isomerization product (Cp(2)Yb)(2)[mu-eta(2):eta(2):eta(1)-(CyNH)(2)CN(C(5)H(3)N-2,3)NC(NCy)(2)] (4). Moreover, the reaction of various ytterbium aryl diamido complexes (prepared in situ from [Cp(2)YbMe](2) and aryldiamine, respectively) with CyN=C=NCy affords the corresponding addition products (Cp(2)Yb)(2)[mu-eta(2):eta(2)-{CyN(CyNH)CN}(2)(C(6)H(4)-1,4)] (5), (Cp(2)Yb)(2)[mu-eta(2):eta(2)-{CyN(CyNH)CN}(2)(C(6)H(4)-1,3)](6), and (Cp(2)Yb)(2)[mu-eta(2):eta(2)-{CyN(CyNH)CN}(2)(C(13)H(8)-2,7)] (7), respectively. In contrast to pyridyl-bridged bis(guanidinate monoanion) complexes, aryl-bridged bis(guanidinate monoanion) complexes 5-7 are stable even with prolonged heating at 110 degrees C. All the results not only demonstrate that the presence of the pyridyl bridge can impart the diamido complexes with a unique reactivity and initiate the unexpected reaction sequence but also indicate evidently that the number and distribution of negative charges of the diguanidinate ligand is tunable from double monoanionic units to mixed neutral/dianionic isomers. All the complexes are characterized by elemental analysis and IR spectroscopies. The structures of complexes 1a, 3, 5, 6, and 7 are also determined through X-ray single-crystal diffraction analysis.     

A facile and general approach to the Rh-M (M = Co, Rh) single bond supported by ortho-carborane-1,2-dichalcogenolato ligands

A series of hetero- and homo-dinuclear complexes with direct metal-metal interaction are synthesized through reaction of Cp*Rh[E(2)C(2)(B(10)H(10))] (E = S (1a), Se (1b)) and CpRh[S(2)C(2)(B(10)H(10))] (2a) with low valent half-sandwich CpCo(CO)(2) or CpRh(C(2)H(4))(2) under moderate conditions. The resulting products, namely (Cp*Rh)(CpCo)[E(2)C(2)(B(10)H(10))] (E = S(3a); Se(3b)), (Cp*Rh)(CpRh)[E(2)C(2)(B(10)H(10))] (E = S(4a); Se(4b)) and (CpRh)(CpRh)[S(2)C(2)(B(10)H(10))] (5a), are fully characterized by IR and NMR spectroscopy and elemental analysis. The molecular structures of 3a, 3b, 4a, 4b and 5a are established by X-ray crystallography analyses, and the Rh-Co (2.4778(11) (3a) and 2.5092(16) (3b) A) and Rh-Rh bonds (2.5721(8) (4a), 2.6112(10) (4b), 2.5627(10) (5a) A) fall in the range of single bonds.     

Inter- and intramolecular activation of aromatic C-H bonds by diphosphine and hydrido-bridged dinuclear iridium complexes

Reactions of [(Cp*Ir)2(mu-dmpm)(mu-H)2]2+ (1) with NaOtBu in aromatic solvent at room temperature give [(Cp*Ir)(H)(mu-dmpm)(mu-H)(Cp*Ir)(Ar)]+ [Ar = Ph (3), p-Tol (4a), m-Tol (4b), 2-furanyl (5a), 3-furanyl (5b)] via intermolecular aromatic C-H activation. Treatment of [(Cp*Ir)2(mu-dppm)(mu-H)2]2+ (2) with base (Et2NH) results in intramolecular C-H activation of the phenyl group in the dppm ligand to give [(Cp*Ir)(H){mu-PPh(C6H4)CH2PPh2}(mu-H)(Cp*Ir)]+ (6). The structures of 3, 5a, and 6 have been determined by X-ray diffraction methods.     

Helical supramolecular assemblies of {2,4,6-[Cp*Rh(E2-1,2-C2B10H10)(NC5H4CH2S)]3(triazine)} (E = S, Se) shaped by Cp*-Toluene-Cp* pi-stacking forces and BH-pyridine hydrogen bonding

Polycarborane-substituted molecules [Cp*Rh{E 2C 2(B 10H 10)}] 3(tpst) [E = S ( 2a), Se ( 2b)] were synthesized and characterized. 2a and 2b form toluene solvates in the solid state showing infinitely connected [( 2a, b)-(toluene)] infinity helices. The chains of these supramolecules are held together by Cp*-toluene-Cp* pi-stacking interactions of two of the three Cp* ligands of the bell-shaped 2a and 2b molecules. Unconventional BH (delta-)-pyridyl (delta+) aromatic hydrogen bonding enforces the bell-shapes of the molecular units, and the Cp* conformations are expected to induce the supramolecular structures.     

Versatile reactivity of half-sandwich Ir and Rh complexes toward carboranylamidinates and their derivatives: synthesis, structure, and catalytic activity for norbornene polymerization

Synthesis, structure, and reactivity of carboranylamidinate‐based half‐sandwich iridium and rhodium complexes are reported for the first time. Treatment of dimeric metal complexes [{Cp*M(μ‐Cl)Cl}₂] (M=Ir, Rh; Cp*=η⁵‐C₅Me₅) with a solution of one equivalent of nBuLi and a carboranylamidine produces 18‐electron complexes [Cp*IrCl(Cab^N‐DIC)] ( 1 a ; Cab^N‐DIC=[iPrN?C(closo‐1,2‐C₂B₁₀H₁₀)(NHiPr)]), [Cp*RhCl(Cab^N‐DIC)] ( 1 b ), and [Cp*RhCl(Cab^N‐DCC)] ( 1 c ; Cab^N‐DCC=[CyN?C(closo‐1,2‐C₂B₁₀H₁₀)(NHCy)]). A series of 16‐electron half‐sandwich Ir and Rh complexes [Cp*Ir(Cab^N′‐DIC)] ( 2 a ; Cab^N′‐DIC=[iPrN?C(closo‐1,2‐C₂B₁₀H₁₀)(NiPr)]), [Cp*Ir(Cab^N′‐DCC)] ( 2 b , Cab^N′‐DCC=[CyN?C(closo‐1,2‐C₂B₁₀H₁₀)(NCy)]), and [Cp*Rh(Cab^N′‐DIC)] ( 2 c ) is also obtained when an excess of nBuLi is used. The unexpected products [Cp*M(Cab^N,S‐DIC)], [Cp*M(Cab^N,S‐DCC)] (M=Ir 3 a , 3 b ; Rh 3 c , 3 d ), formed through BH activation, are obtained by reaction of [{Cp*MCl₂}₂] with carboranylamidinate sulfides [RN?C(closo‐1,2‐C₂B₁₀H₁₀)(NHR)]S^? (R=iPr, Cy), which can be prepared by inserting sulfur into the C? Li bond of lithium carboranylamidinates. Iridium complex 1 a shows catalytic activities of up to 2.69×10⁶ g_PNB ${{\rm{mol}}_{{\rm{Ir}}}^{ - {\rm{1}}} }Synthesis, structure, and reactivity of carboranylamidinate-based half-sandwich iridium and rhodium complexes are reported for the first time. Treatment of dimeric metal complexes [{Cp*M(μ-Cl)Cl}(2)] (M = Ir, Rh; Cp* = η(5)-C(5)Me(5)) with a solution of one equivalent of nBuLi and a carboranylamidine produces 18-electron complexes [Cp*IrCl(Cab(N)-DIC)] (1?a; Cab(N)-DIC = [iPrN=C(closo-1,2-C(2)B(10)H(10))(NHiPr)]), [Cp*RhCl(Cab(N)-DIC)] (1?b), and [Cp*RhCl(Cab(N)-DCC)] (1?c; Cab(N)-DCC = [CyN=C(closo-1,2-C(2)B(10)H(10))(NHCy)]). A series of 16-electron half-sandwich Ir and Rh complexes [Cp*Ir(Cab(N')-DIC)] (2?a; Cab(N')-DIC = [iPrN=C(closo-1,2-C(2)B(10)H(10))(NiPr)]), [Cp*Ir(Cab(N')-DCC)] (2?b, Cab(N')-DCC = [CyN=C(closo-1,2-C(2)B(10)H(10)(NCy)]), and [Cp*Rh(Cab(N')-DIC)] (2?c) is also obtained when an excess of nBuLi is used. The unexpected products [Cp*M(Cab(N,S)-DIC)], [Cp*M(Cab(N,S)-DCC)] (M = Ir 3?a, 3?b; Rh 3?c, 3?d), formed through BH activation, are obtained by reaction of [{Cp*MCl(2)}(2)] with carboranylamidinate sulfides [RN=C(closo-1,2-C(2)B(10)H(10))(NHR)]S(-) (R = iPr, Cy), which can be prepared by inserting sulfur into the C-Li bond of lithium carboranylamidinates. Iridium complex 1?a shows catalytic activities of up to 2.69×10(6) g(PNB) mol(Ir)(-1) h(-1) for the polymerization of norbornene in the presence of methylaluminoxane (MAO) as cocatalyst. Catalytic activities and the molecular weight of polynorbornene (PNB) were investigated under various reaction conditions. All complexes were fully characterized by elemental analysis and IR and NMR spectroscopy; the structures of 1?a-c, 2?a, b; and 3?a, b, d were further confirmed by single crystal X-ray diffraction.     

Nitrogen atom insertion into Ir-S and C-S bonds initiated by photolysis of iridium(III)-azido-dithiocarbamato complexes

Photolysis of acetonitrile solutions of Cp*Ir(R2dtc)(N3) [Cp* = eta5-C5Me5, R2dtc = S2CNR2; R = Me (1) or Et (1')] at temperatures below 0 degrees C afford five-coordinate complexes Cp*Ir{NSC(NR2)S} (2 or 2'), where a nitrogen atom has been inserted into one of the Ir-S bonds. In solution, complex 2 thermally convert to the azaethene-1,2-dithiolate complex, Cp*Ir[SN=C(NMe2)S] (3), which could be crystallized as the corresponding dimer, {Cp*Ir[mu-SN=C(NMe2)S-kappa3S:S,S']}2 (4). As a result, a nitrogen atom that originated in the azide ligand is transferred into a C-S bond of the dithiocarbamate.     

Trapping unstable terminal M-O multiple bonds of monocyclopentadienyl niobium and tantalum complexes with Lewis acids

Hydrolysis of [NbCp'Cl(4)] (Cp' = η(5)-C(5)H(4)SiMe(3)) with the water adduct H(2)O·B(C(6)F(5))(3) afforded the oxo-borane compound [NbCp'Cl(2){O·B(C(6)F(5))(3)}] (2a). This compound reacted with [MgBz(2)(THF)(2)] giving [NbCp'Bz(2){O·B(C(6)F(5))(3)}] (2b), whereas [NbCp'Me(2){O·B(C(6)F(5))(3)}] (2c) was obtained from the reaction of [NbCp'Me(4)] with H(2)O·B(C(6)F(5))(3). Addition of Al(C(6)F(5))(3) to solutions containing the oxo-borane compounds [MCp(R)X(2){O·B(C(6)F(5))(3)}] (M = Ta, Cp(R) = η(5)-C(5)Me(5) (Cp*), X = Cl 1a, Bz 1b, Me 1c; M = Nb, Cp(R) = Cp', X = Cl 2a) afforded the oxo-alane complexes [MCp(R)X(2){O·Al(C(6)F(5))(3)}] (M = Ta, Cp(R) = Cp*, X = Cl 3a, Bz 3b, Me 3c; M = Nb, Cp(R) = Cp', X = Cl 4a), releasing B(C(6)F(5))(3). Compound 3a was also obtained by addition of Al(C(6)F(5))(3) to the dinuclear μ-oxo compound [TaCp*Cl(2)(μ-O)](2), meanwhile addition of the water adduct H(2)O·Al(C(6)F(5))(3) to [TaCp*Me(4)] gave complex 3c. The structure of 2a and 3a was obtained by X-ray diffraction studies. Density functional theory (DFT) calculations were carried out to further understand these types of oxo compounds.     

End-group-confined chain walking within a group 4 living polyolefin and well-defined cationic zirconium alkyl complexes for modeling this behavior

Living polymers derived from the polymerization of 1-butene using the cationic zirconium initiator, {Cp*ZrMe[N(Et)C(Me)-N(tBu)]}[B(C6F5)4] (Cp* = eta5-C5Me5) (1), have been shown to undergo end-group-confined chain walking that is competitive with direct beta-hydride elimination and chain release at -10 degrees C. The well-defined complexes, {Cp*Zr(iBu)[N(Et)C(Me)N(tBu)]}[B(C6F5)4] (2) and {Cp*Zr(2-ethylbutyl)[N(Et)C(Me)N(tBu)]}[B(C6F5)4] (3), were prepared, and each was found to possess a strong beta-hydrogen agostic interaction that is absent in the living polymer. The isotopically single- and double-labeled derivatives, {Cp*Zr(2-d-2-methylpropyl)[N(Et)C(Me)N(tBu)]}[B(C6F5)4] (2') and {Cp*Zr(1-13C-2-d-2-methylpropyl)[N(Et)C(Me)N(tBu)]}[B(C6F5)4] (2' '), were also prepared and found to undergo isotopic label scrambling at 0 degrees C. For 2' ', the observation that after scrambling each deuterium label is located on a 13C-labeled carbon atom is consistent with the Busico mechanism for chain-end epimerization rather than the Resconi mechanism. Decomposition of 3 yielded olefinic products also consistent with chain walking prior to beta-hydride elimination and chain release. Finally, the unexpected decrease in stability of the living polymer relative to that of the model complexes reveals the importance of subtle differences in steric and electronic factors in controlling beta-hydride elimination and chain release.     

Synthesis and reactivity of Ir(I) and Ir(III) complexes with MeNH2, Me2C=NR (R = H, Me), C,N-C6H4{C(Me)=N(Me)}-2, and N,N'-RN=C(Me)CH2C(Me2)NHR (R = H, Me) ligands

Complexes [Ir(Cp*)Cl(n)(NH2Me)(3-n)]X(m) (n = 2, m = 0 (1), n = 1, m = 1, X = Cl (2a), n = 0, m = 2, X = OTf (3)) are obtained by reacting [Ir(Cp*)Cl(mu-Cl)]2 with MeNH2 (1:2 or 1:8) or with [Ag(NH2Me)2]OTf (1:4), respectively. Complex 2b (n = 1, m = 1, X = ClO 4) is obtained from 2a and NaClO4 x H2O. The reaction of 3 with MeC(O)Ph at 80 degrees C gives [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(NH2Me)]OTf (4), which in turn reacts with RNC to give [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(CNR)]OTf (R = (t)Bu (5), Xy (6)). [Ir(mu-Cl)(COD)]2 reacts with [Ag{N(R)=CMe2}2]X (1:2) to give [Ir{N(R)=CMe2}2(COD)]X (R = H, X = ClO4 (7); R = Me, X = OTf (8)). Complexes [Ir(CO)2(NH=CMe2)2]ClO4 (9) and [IrCl{N(R)=CMe2}(COD)] (R = H (10), Me (11)) are obtained from the appropriate [Ir{N(R)=CMe2}2(COD)]X and CO or Me4NCl, respectively. [Ir(Cp*)Cl(mu-Cl)]2 reacts with [Au(NH=CMe2)(PPh3)]ClO4 (1:2) to give [Ir(Cp*)(mu-Cl)(NH=CMe2)]2(ClO4)2 (12) which in turn reacts with PPh 3 or Me4NCl (1:2) to give [Ir(Cp*)Cl(NH=CMe2)(PPh3)]ClO4 (13) or [Ir(Cp*)Cl2(NH=CMe2)] (14), respectively. Complex 14 hydrolyzes in a CH2Cl2/Et2O solution to give [Ir(Cp*)Cl2(NH3)] (15). The reaction of [Ir(Cp*)Cl(mu-Cl)]2 with [Ag(NH=CMe2)2]ClO4 (1:4) gives [Ir(Cp*)(NH=CMe2)3](ClO4)2 (16a), which reacts with PPNCl (PPN = Ph3=P=N=PPh3) under different reaction conditions to give [Ir(Cp*)(NH=CMe2)3]XY (X = Cl, Y = ClO4 (16b); X = Y = Cl (16c)). Equimolar amounts of 14 and 16a react to give [Ir(Cp*)Cl(NH=CMe2)2]ClO4 (17), which in turn reacts with PPNCl to give [Ir(Cp*)Cl(H-imam)]Cl (R-imam = N,N'-N(R)=C(Me)CH2C(Me)2NHR (18a)]. Complexes [Ir(Cp*)Cl(R-imam)]ClO4 (R = H (18b), Me (19)) are obtained from 18a and AgClO4 or by refluxing 2b in acetone for 7 h, respectively. They react with AgClO4 and the appropriate neutral ligand or with [Ag(NH=CMe2)2]ClO4 to give [Ir(Cp*)(R-imam)L](ClO4)2 (R = H, L = (t)BuNC (20), XyNC (21); R = Me, L = MeCN (22)) or [Ir(Cp*)(H-imam)(NH=CMe2)](ClO4)2 (23a), respectively. The later reacts with PPNCl to give [Ir(Cp*)(H-imam)(NH=CMe2)]Cl(ClO4) (23b). The reaction of 22 with XyNC gives [Ir(Cp*)(Me-imam)(CNXy)](ClO4)2 (24). The structures of complexes 15, 16c and 18b have been solved by X-ray diffraction methods.     

Novel class of heterometallic cubane and boride clusters containing heavier group 16 elements

Thermolysis of an in situ generated intermediate, produced from the reaction of [Cp*MoCl(4)] (Cp* = η(5)-C(5)Me(5)) and [LiBH(4).THF], with excess Te powder yielded isomeric [(Cp*Mo)(2)B(4)TeH(5)Cl] (2 and 3), [(Cp*Mo)(2)B(4)(μ(3)-OEt)TeH(3)Cl] (4), and [(Cp*Mo)(4)B(4)H(4)(μ(4)-BH)(3)] (5). Cluster 4 is a notable example of a dimolybdaoxatelluraborane cluster where both oxygen and tellurium are contiguously bound to molybdenum and boron. Cluster 5 represents an unprecedented metal-rich metallaborane cluster with a cubane core. The dimolybdaheteroborane 2 was found to be very reactive toward metal carbonyl compounds, and as a result, mild pyrolysis of 2 with [Fe(2)(CO)(9)] yielded distorted cubane cluster [(Cp*Mo)(2)(BH)(4)(μ(3)-Te){Fe(CO)(3)}] (6) and with [Co(2)(CO)(8)] produced the bicapped pentagonal bipyramid [(Cp*MoCo)(2)B(3)H(2)(μ(3)-Te)(μ-CO){Co(3)(CO)(6)}] (7) and pentacapped trigonal prism [(Cp*MoCo)(2)B(3)H(2)(μ(3)-Te)(μ-CO)(4){Co(6)(CO)(8)}] (8). The geometry of 8 is an example of a heterometallic boride cluster in which five Co and one Mo atom define a trigonal prismatic framework. The resultant trigonal prism core is in turn capped by two boron, one Te, and one Co atom. In the pentacapped trigonal prism unit of 8, one of the boron atoms is completely encapsulated and bonded to one molybdenum, one boron, and five cobalt atoms. All the new compounds have been characterized in solution by IR, (1)H, (11)B, and (13)C NMR spectroscopy, and the structural types were unambiguously established by crystallographic analysis of 2 and 4-8.