毛细管电泳法分离测定芦丁、槲皮素和连翘苷

用毛细管电泳紫外检测法同时测定了芦丁、槲皮素和连翘苷，研究了各种条件的影响，得到了优化的实验条件，在20mmol/L的Na2B4O7(H3B03调节至pH8．40)-30mmol/L十二烷基硫酸钠-10％乙腈(1 9)的缓冲溶液中，分离电压为12kV时，芦丁、槲皮素和连翘苷在10min内得到了良好的分离，检测波长为254nm，芦丁、槲皮素和连翘苷分别在0．01-1．0mg/mL，0．01-1．0mg／mL和0．05-1．0mg/mL质量浓度范围内与电泳峰高呈现良好线性关系，检测下限分别为0．005mg/mL，0．005mg/mL和0．01mg／mL，应用于实际样品的测定。     

罗红霉素及其制剂的非水介质毛细管电泳安培检测

研究了非水介质毛细管电泳－安培检测（NACE－AD）罗红霉素的方法，着重探讨了非水介质、支持电解质、酸碱度和电极电位对分离测定的影响；以铂丝为检测电极，电极电位为0．93V，在以甲酰胺－甲醇（体积比1：1）为有机溶剂，10mmol/L乙酸铵－2mmol/L乙酸为缓冲液的非水体系中，并用样条小波最小二乘法进行数据处理，罗红霉素的检出限为0.1mg/L,在5－100mg/L范围内的线性回归方程为：S＝80．1＋73．1ρ,r=0.9994;用该法检测罗红霉素制剂，回收率为94％－96％，结果令人满意。     

高效毛细管电泳电导法快速检测复方维生素B片中的VBl、VBl2、VB6和VC

采用高效毛细管电泳电导法同时分离、测定了复方维生素B片中的主要成分VB1，VB12，VB6和VC的含量。研究了运行缓冲溶液的酸度和浓度、电泳电压、进样时间等因素对电泳的影响。在优化的实验条件下：40mmol/L Tris-4mmol/L H3BO3(pH8．0)的缓冲溶液中加入0．30mmol/L CTAB(溴化十六烷基三甲基铵)，分离电压为15kV，上述4组分在5min内得到良好的分离。维生素B1，B12，B6和VC的线性范围分别为5．5～1．0mg/mL；15～1．5mg／mL;1．0～0．40mg／mL和6．6～0．80mg／mL；检测限分别为0．80μg/mL，4．0μg/mL，0．50μg/mL，2．9μg/mL；5次测定峰高的相对标准偏差分别为2．2％，1．6％，3．9％，2．8％。5次测定的平均回收率分别为99％，94％，l00％，97％。     

复方维生素B片中主要成分的高效毛细管电泳电化学法检测

采用高效毛细管电泳－电化学检测法同时测定复方维生素B片中的主要成分维生素B1，B12，B6和C的含量；研究了电极电位，运行缓冲溶液的浓度和酸度，电泳电压和进样时间等对电泳的影响，以微铂电极为工作电极，检测电位＋0．5V（vs SCE)，在pH9.0的15mmol/L Tris-1mmol/L H3BO3缓冲溶液中，上述4组分在5min内获得基线分离；维生素B1，B12，B6和C的线性范围分别为2．1mg/L-1.0g/L,6.0mg/L-0.80g/L,1.4mg/L-0.72g/L和0．97mg/L-0.44g/L检出限分别为0．50mg/L,1.0mg/L,,0.65mg/L和0．40mg/L；5次测定峰高的相对标准偏差分别为2．4％，3．0％，3．1％，和2．5％，5次测定的平均回收率分别为99％，102％，98％和100％。     

环丙沙星荷移反应及荧光光谱性质研究

研究了环丙沙星（CPFX）与电子受体2，3－二氰－5，6－二氯－1，4对苯酯（DDQ）之间的荷移反应。实验结果表明：DDQ与CPFX的荷移反应需在丙酮－甲醇（1：4）介质中进行。两者于40℃水浴中恒温30min即可形成1：1络合物，其荧光发射较CPFX有显著的增强。在0．107．2mg/L浓度范围内，荧光强度与质量浓度呈良好线性关系；其检出限为0．1mg/L。本方法用于片剂中环丙沙星的含量测定，其回收率为96．6％－100．2％；标准偏差为1．3％－2．6％。     

离子色谱荧光检测法测定废水中痕量2-氨基联苯和4-氨基联苯

采用离子色谱荧光检测法测定废水中的2－氨基联苯（2－ADP）和4－氨基联苯（4－ADP）,流动相为1．0mL/min的0．06mol/L NaCl,0.08mol/L HCl,40%(V/V)ACN,分离柱为Dinoex OmniPac PCX-500,该法具有良好的重现性和线性关系,2－ADP和4－ADP的回收率分别为98．5％－101．4％和102．2％－104．0％,检测限分别为0．006mg/L和0．10mg/L。     

测定戒毒病人尿中吗啡含量的HPCE法

采用高效毛细管电泳法测定戒毒病人尿中吗啡含量，5mL尿样加碱调节pH值，用GDX－301作为固相萃取剂，氯仿－异丁醇洗脱，收集液在40℃下氮气吹干，定容进样；缓冲液由20mmol/L磷酸盐、20mmol/L硼酸盐、50mmol/L十二烷基硫酸钠、5％（φ）乙腈组成，pH＝8．2；吗啡在紫外波长210nm检测，出峰时间为6．17min，线性范围为2．5－30mg/L，测得线性回归方程Y＝0．521＋8．836ρ，相关系数r＝0．999，检出限为50μg/L，日内和日间误差分别低于4％和6％；与HPLC比较，测定结果与HPLC无显著性差异（P＞0．05）；结果表明该法分析速度快，分离效果好，适用于临床疗效观察。     

毛细管区带电泳法测定复方芦丁片中芦丁和维生素C的含量

考察了缓冲溶液的pH、背景电解质浓度及分离电压对芦丁、维生素C及苯甲酸分离的影响，建立了以苯甲酸为内标，毛细管区带电泳法快速测定复方芦丁片中芦丁和维生素C含量的新方法。以3g/L硼砂－4g/L硼酸(pH8.18）为运行缓冲液，苯甲酸为内标，在分离电压为25kV，检测波长为254nm的电泳条件下，芦丁、维生素C和内标可在5min实现分离。芦丁的线性方程为：y=2．65x＋0．095（r＝0．9994），线性范围为0．025mg/mL－0．4mg/mL，维生素C的线性方程为：y＝3．1343x＋0．565（r＝0．9991），线性范围0．125mg/mL－1．0mg/mL。方法可用于复方芦丁片的质量控制。     

五氧化二钒中微量镁的测定

本文采用共沉淀定量分离方法对五氧化二钒中所含微量镁进行极谱测定。检出限为1．5mg/L，线性范围为0～0．4mg／L。精确度为：标准偏差S=0．14，变异系数CV=1．92％；相对误差为2．3％．     

非水介质毛细管电泳电化学检测日夜百服宁中的有效成分

用非水毛细管电泳电化学检测法分离检测了日夜百服宁中的有效成分，研究了电极电位，不同浓度的甲酰胺（FA），电解液浓度和酸度，电泳电压及进样时间对电泳分离的影响，得到了较为优化的测定条件。实验结果表明，在25mmol/L Tris-25mmol/L H3BO3(表观pH=8.5)运行介质中，日夜百服宁中的4种有效成分即扑热息痛（AP），盐酸伪麻黄碱（PH），氢溴酸右美沙芬（DM）和扑尔敏（CM）在12min内完全分离，检测电位为＋0．9V(vs.SCE)。线性范围分别为AP 0．5－200mg/L;PH 0.8-300mg/L;DM2.5-350mg/L;CM0.5-330mg/L；检测限分别为AP0.1mg/L;PH0.55mg/L;DM1mg/L;CM0.2mg/L。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.