Detection of Amadori compounds by capillary electrophoresis coupled to tandem mass spectrometry

Capillary electrophoresis coupled to mass spectrometry (CE-MS) is reported for the first time as an alternative and powerful analytical method for the characterization and monitoring of N-substituted 1-amino-1-deoxyketoses (Amadori compounds). It allows rapid separation and identification of Amadori compounds, while benefiting from the well-known advantages of MS, such as specificity and sensitivity. Amadori compounds of several amino acids, such as glycine, valine, isoleucine, methionine, proline, and phenylalanine, as well as a cysteine-derived compound, were separated and/or discriminated using CE-MS/MS under standard conditions. The technique may also be useful to study the stability and degradation kinetics of other labile charged Maillard intermediates that play an important role in food and medical science.     

Potential of capillary electrophoresis, tandem mass spectrometry and coupled capillary electrophoresis-tandem mass spectrometry as diagnostic tools

Urine and blood samples from patients with known metabolic disorders have been analyzed by CE, MS-MS and CE-MS-MS. For the identification of defects in acylcarnitine metabolism, blood spots on filter paper were analyzed using an MS-MS "neonatal screening" approach. Direct CE-MS-MS analysis was used for the analysis of urine samples from patients with different metabolic disorders, including galactosemia, neuroblastoma, Zellweger syndrome, propionic acidemia and alcaptonuria. The sensitivity of the CE-MS-MS method was increased by use of multiple reaction monitoring.     

Identification of anthraquinone coloring matters in natural red dyes by electrospray mass spectrometry coupled to capillary electrophoresis

Capillary electrophoresis with UV/visible diode-array detection (DAD) and electrospray mass spectrometric (ESI-MS) detection were used for the identification of anthraquinone color components of cochineal, lac-dye and madder, natural red dyestuffs often used by ancient painters. For the purpose of such analysis, ESI-MS was found to be a much more appropriate detection technique than DAD one owing to its higher sensitivity (detection limits in the range 0.1-0.5 micro g ml(-1)) and selectivity. The method developed made it possible to identify unequivocally carminic acid and laccaic acids A, B and E as coloring matters in the examined preparations of cochineal and lac-dye, respectively. In madder, European Rubia tinctorum, alizarin and purpurin were found. The method allows the rapid, direct and straightforward identification and quantification of components of natural products used in art and could be very helpful in restoration and conservation procedures.     

Simultaneous determination of new thioamphetamine designer drugs in plasma by capillary electrophoresis coupled with mass spectrometry

A simple method for the simultaneous identification and quantification of four 2,5-methylenedioxy derivatives of 4-thioamphetamine (ALEPH series) in plasma samples was developed. The method consists of solid-phase extraction (SPE) using a Bond Elut C(18) cartridge and capillary electrophoresis coupled with electrospray ionisation mass spectrometry (CE/ESI-MS). The SPE method used required only simple steps and provided a clean extract from which identification of each drug was feasible, even at low concentrations. The method was validated according to international guidelines. The calibration curves were linear over the concentration range of 50 to 1000 ng/mL for all drugs with correlation coefficients that exceeded 0.998. The lower limits of detection of the drugs were 23-43 ng/mL. The absolute recoveries for the drugs were 64-92% and 75-96% at concentrations of 100 and 500 ng/mL, respectively. The validation data (precision, accuracy, and recovery) show the reproducibility and selectivity of the method. This clean and simple method allows the routine detection of designer drugs such as thioamphetamines which may become a serious problem in the control of illegal drugs.     

Analysis of metallothioneins by means of capillary electrophoresis coupled to electrospray mass spectrometry with sheathless interfacing

Capillary electrophoresis (CE) coupled to electrospray mass spectrometry via sheathless interfacing has been applied to the analysis of mammalian metallothionein (MT) extracts. In a rabbit-liver extract, four (MT-2C, MT-2A, MT-2D and MT-2E) out of six known MT sub-isoforms were unambiguously identified under three CE-resolved peaks. A fourth peak was found to contain MT-1A and/or MT-2B, whose molecular masses differ by only 1 Da. Traces of non-N-acetylated MT-2D and MT-2E were observed in a fifth, minor peak. In a rat-liver extract, both MT-1 and MT-2 were resolved and identified. Non-N-acetylated MT-2 was also identified in a resolved, minor peak. Minimum detectable amounts of MTs have been estimated to be approximately 0.6 fmol per sub-isoform.     

Separation and identification of platinum adducts with DNA nucleotides by capillary zone electrophoresis and capillary zone electrophoresis coupled to mass spectrometry

Platinum adducts are supposed to be the cytotoxic lesions in DNA after platinum-containing anticancer therapy. Various adducts are formed upon interaction of platinum complexes with nucleotides, but contribution of individual adducts to antitumor activity and toxicity of platinum complexes still remains to be examined. A capillary zone electrophoresis (CZE) method is described that is suitable to separate individual platinum adducts. We investigated the formation of adducts following the reaction of cis-diamminedichloroplatinum (II) (cisplatin) with various DNA nucleotides. Baseline separation of unmodified and modified nucleotides (adducts) was achieved using uncoated fused-silica capillaries and basic separation buffers. In order to elucidate the observed peak pattern, a coupled CZE-electrospray ionization-mass spectrometry (ESI)-MS approach was applied. After incubation of mononucleotides with cisplatin, monochloro, monoaqua and bifunctional adduct species were detected. Consequently, the migration order of nucleotides and individual platinum adducts could be determined. Moreover, the time-dependent conversion from monochloro to monoaqua and subsequently to bifunctional adducts was monitored. In conclusion, individual platinum adducts were separated by CZE and identified by CZE-ESI-MS. Formation and conversion of distinct species were confirmed. Potential applications comprise studies of novel platinum complexes, investigations of platinum-adduct formation with DNA, and determination of platinum-DNA adducts in cells.     

Determination of monophosphate nucleotides by capillary electrophoresis inductively coupled plasma mass spectrometry

A preliminary study of a modified microconcentric nebulizer (CEI-100, CETAC) as the sample introduction device of capillary electrophoresis inductively coupled plasma mass spectrometry (CE-ICP-MS) for the determination of monophosphate nucleotides is described. The monophosphate nucleotides studied include adenosine 5'-monophosphate (AMP), guanosine 5'-monophosphate (GMP), uridine 5'-monophosphate (UMP) and inosine 5'-monophosphate (IMP). The species studied were well separated using a 70 cm length x 75 microm id fused silica capillary while the applied voltage was set at -22 kV and a 20 mmol l(-1) ammonium citrate/citric acid buffer (pH 4.0) containing 0.1% m/v cationic polymer (hexadimethrine bromide, Polybrene) was used as the electrophoretic buffer. The electroosmotic flow was reversed by flushing the fused silica capillary with 0.2% m/v Polybrene to accelerate separation. The detection limit of various species studied was in the range of 0.036-0.054 microg P ml(-1), which corresponded to the absolute detection limit of 1.1-1.6 pg P based on the injection volume of 30 nl. We determined the concentrations of nucleotides in two IG-enriched monosodium glutamates purchased from the local market. The recovery was in the range of 100-112% for various species, and the concentrations of IMP and GMP in these samples were in the range of 0.15-0.18% m/m.     

Optimization of phenolic compounds analysis by capillary electrophoresis

Operational parameters like migration time, temperature, voltage, composition of background electrolyte and content of organic modifier were optimized in CZE for the determination of lignin-like phenolic compounds.The applied background electrolyte buffer consisted of a Na₂B₄O₇, KH₂PO₄ aqueous solution, pH 9.15 using acetonitrile as organic modifier with UV-detection. Compounds, such as acetosyringone, acetovanillone, syringealdehyde, p-hydroxyacetophenone, vanillin, syringic acid, ferulic acid, p-hydroxybenzaldehyde, p-coumaric acid, vanillic acid and p-hydroxybenzoic acid were applied as reference compounds.The quality and quantity of different phenolic compounds obtained upon alkaline CuO oxidation of a commercial humic acid were determined with CZE using ethylvanillin as internal standard.The optimized CZE revealed has being an appropriate method since it is quick, sensitive and quantitative and does not require a time-consuming sample preparation.     

Determination of heterocyclic aromatic amines by capillary electrophoresis coupled to mass spectrometry using in-line preconcentration

This paper shows the potentiality of capillary electrophoresis (CE) coupled to mass spectrometry (MS) for the analysis of heterocyclic aromatic amines obtaining good results in terms of sensitivity and precision. These compounds have a special interest since they can be carcinogenic for humans. The optimization of a CE-MS method was performed and the best conditions were obtained using a 16 mM formic acid/ammonium formate solution at pH 4.5 with 60% methanol as running electrolyte. For CE-MS coupling, a sheath liquid methanol/20 mM formic acid (75/25) solution at a flow rate of 3 microL/min and hydrodynamic injection of methanol mixtures for 10 s were used. Detection limits ranging from 18 ng/g to 360 ng/g and precisions up to 1.4% and 12% for migration time and concentration, respectively, were obtained. In order to improve sensitivity, field-amplified sample injection was applied as an in-line preconcentration method. Methanol/5 mM formic acid (50/50) as a sample solvent, 3 s hydrodynamic injection (0.5 psi) of a methanol plug, and 25 s of electrokinetic injection (10 kV) of the sample were found to be the optimum conditions. Detection limits up to 25 times lower and similar precisions than those reported for hydrodynamic injection were obtained.     

Analysis of isoflavones in soy drink by capillary zone electrophoresis coupled with electrospray ionization mass spectrometry

Capillary zone electrophoresis coupled with electrospray ionization mass spectrometry (CZE–ESI-MS) has been applied for the first time for the separation and quantification of isoflavones in soy products. The proposed method was successfully applied to the determination of seven isoflavones, including aglycones and glucosides, in soy drink. The target compounds were the glucosides daidzin and genistin, and the aglycones daidzein, genistein, formononetin, biochanin A and glycitein. During CE separation in positive mode, the analytes were present as anions, and MS detection was carried out in ESI positive-ion mode. To prevent the frequent drops in current and to improve the resolution in the separation of analytes in anionic form, a programmed nebulizing gas pressure (PNP) was applied along the analysis.     

In‐capillary approach to eliminate SDS interferences in antibody analysis by capillary electrophoresis coupled to mass spectrometry

Capillary electrophoresis is an important technique for the characterization of monoclonal antibodies (mAbs), especially in the pharmaceutical context. However, identification is difficult as upscaling and hyphenation of used methods directly to mass spectrometry is often not possible due to separation medium components that are incompatible with MS detection. Here a CE‐MS method for the analysis of mAbs is presented analyzing SDS‐complexed samples. To obtain narrow and intensive peaks of SDS‐treated antibodies, an in‐capillary strategy was developed based on the co‐injection of positively charged surfactants and methanol as organic solvent. For samples containing 0.2% (v/v) of SDS, recovered MS peak intensities up to 97 and 95% were achieved using cetyltrimethylammonium bromide or benzalkonium chloride, respectively. Successful removal of SDS was shown in neutral coated capillaries but also in a capillary with a positively charged coating applying reversed polarity. The usefulness of this in‐capillary strategy was demonstrated also for other proteins and for antibodies dissolved in up to 10% v/v SDS solution, and in other SDS‐containing matrices, including the sieving matrix used in a standard CE‐SDS method and gel‐buffers applied in SDS‐PAGE methods. The developed CE‐MS approaches enable fast and reproducible characterization of SDS‐complexed antibodies.     

Determination of cobalamins using capillary electrophoresis inductively coupled plasma mass spectrometry

The determination of cobalamins using capillary electrophoresis inductively coupled plasma mass spectrometry (CE-ICP-MS) was investigated. Both capillary zone electrophoresis (CZE) and micellar electrokinetic chromatography (MEKC) modes of operation were studied. The optimal separation of four cobalamin species (cyanocobalamin, hydroxocobalamin, methylcobalamin, and 5′-deoxyadenosylcobalamin) and a potentially harmful corrinoid analogue (cobinamide dicyanide) was obtained using CZE at a pH of 2.5. Both 20 mM phosphate and 20 mM formate buffers were used with success, although the formate buffer provided improved resolution. The CZE-ICP-MS method was used to quantify cyanocobalamin in a vitamin supplement and the analytical results were in good agreement (±5%) with values obtained by ICP-MS for total Co levels. The solution detection limits for cobalamins using CZE-ICP-MS were approximately 50 ng/ml. MEKC was found to be useful for the screening of vitamin preparations because it provided a rapid means of distinguishing cyanocobalamin (the form most commonly used in vitamin preparations) from free cobalt. The separation of free cobalt and cyanocobalamin using MEKC was achieved in less than 10 min.     

Analysis of tetrabromobisphenol A and other phenolic compounds in water samples by non-aqueous capillary electrophoresis coupled to photodiode array ultraviolet detection

Non-aqueous capillary electrophoresis (NACE) with large-volume sample stacking injection using the electroosmotic flow pump (LVSEP) has been developed for the determination of tetrabromobisphenol A (TBBPA) and other phenolic compounds in environmental matrices. Methanol has been used as run buffer solvent to reduce the electroosmotic flow (EOF). Identification and quantification of the analytes was performed by photodiode array ultraviolet detection. LVSEP-NACE improved sensitivity of the peak height by 90-300-fold. The method developed was applied to the analysis of TBBPA in river water and wastewater samples, using solid-phase extraction (SPE) as sample pretreatment process. The average recoveries of the analytes were in the range of 96-106% and 73-103% for 1 L of river water and 0.5 L of wastewater samples, respectively. When the method was based on off line SPE-LVSEP-NACE, sensitivity was improved by 3300-4500-fold and 1600-2200-fold for river water and wastewater samples, respectively.     

Ionic liquid-based dispersive liquid-liquid microextraction with back-extraction coupled with capillary electrophoresis to determine phenolic compounds

Ionic liquid (IL) based dispersive liquid-liquid microextraction (DLLME) with back-extraction coupled with capillary electrophoresis ultraviolet detection was developed to determine four phenolic compounds (bisphenol-A, β-naphthol, α-naphthol, 2, 4-dichlorophenol) in aqueous cosmetics. The developed method was used to preconcentrate and clean up the four phenolic compounds including two steps. The analytes were transferred into room temperature ionic liquid (1-octyl-3-methylimidazolium hexafluorophosphate, [C(8) MIM][PF(6) ]) rich-phase in the first step. In the second step, the analytes were back-extracted into the alkaline aqueous phase. The effects of extraction parameters, such as type and volume of extraction solvent, type and volume of disperser, extraction and centrifugal time, sample pH, salt addition, and concentration and volume of NaOH in back-extraction were investigated. Under the optimal experimental conditions, the preconcentration factors were 60.1 for bisphenol-A, 52.7 for β-naphthol, 49.2 for α-naphthol, and 18.0 for 2, 4-dichlorophenol. The limits of detection for bisphenol-A, β-naphthol, α-naphthol and 2, 4-dichlorophenol were 5, 5, 8, and 100 ng mL(-1), respectively. Four kinds of aqueous cosmetics including toner, soften lotion, make-up remover, and perfume were analyzed and yielded recoveries ranging from 81.6% to 119.4%. The main advantages of the proposed method are quick, easy, cheap, and effective.     

Characterization of mixtures of biocidal oligoguanidines by capillary electrophoresis and high-performance liquid chromatography coupled to mass spectrometry

The polycondensation of guanidine hydrochloride and 2,2′-(ethylenedioxy)bis(ethylamine) leads to various types of oligomeric guanidines exhibiting a broad spectrum of biocidal activities. In the present work a reversed-phase high-performance liquid chromatographic method with a gradient consisting of aqueous 0.1% trifluoroacetic acid and acetonitrile as mobile phase has been developed to separate these oligoguanidines according to type and chain length. The combination with electrospray mass spectrometry allowed the identification of the various compounds. By this technique, some structures already suggested in the literature could be confirmed, and several additional oligoguanidines not yet reported could be identified. As a complementary technique, capillary zone electrophoresis was investigated. Best results were obtained with carrier electrolytes consisting of phosphoric acid in water/acetonitrile mixtures. Although the number of peaks that could be separated by the electrophoretic method was considerably lower than in case of the chromatographic method, capillary electrophoresis in combination with UV detection at 195 nm may still be a fast method suitable for quantitation of some of the major compounds and for monitoring the reaction rate during the polycondensation reaction.     

Separation and characterization of rabbit liver apothioneins by capillary electrophoresis coupled to electrospray ionization time-of-flight mass spectrometry

The present study establishes a method for the separation and characterization of rabbit liver metallothionein (MT) subisoforms by capillary electrophoresis coupled to electrospray ionization time-of-flight mass spectrometry (CE-ESI-TOF-MS) via a sheath-flow interface. Directly coupled-CE-MS enables the extraction of specific molecular weight information and thereby facilitates the identification of peaks when no reference materials are available, as in the case of MT subisoforms. The analysis described here revealed the presence of the apothioneins MT-1a, MT-2d, and MT-2e, belonging to MT-I sample, and MT-2a, MT-2b, and MT-2c, belonging to MT-II. Several non-N-acetylated forms were also detected as traces appearing with their respective acetylated forms in both samples. Similar results were found when MALDI-TOF experiments were performed, identifying all the sequenced rabbit liver MTs as apo-MT-forms, as in the CE-ESI-MS coupling.     

Determination of low-molecular-mass quaternary ammonium compounds by capillary electrophoresis and hyphenation with mass spectrometry

The determination of quaternary ammonium ions by capillary electrophoresis (CE) is reviewed. The analytes include tetraalkylammonium and alkylbenzyldimethylammonium compounds frequently used as antiseptic and antibacterial agents as well as in various household products, several plant growth regulators and herbicides, by-products in bile acid sequestrants, and a range of anticholinergic drugs. Besides direct and indirect UV detection, hyphenation with electrospray mass spectrometry is particularly suited for quaternary ammonium ions and may lower the detection limits by two orders of magnitude. In comparison with established liquid chromatographic techniques, CE may exhibits superior separation efficiency. Applications in routine analysis have demonstrated that CE is reliable and robust enough to represent a real alternative to chromatography.     

Characterization of phenolic compounds in Erigeron breviscapus by liquid chromatography coupled to electrospray ionization mass spectrometry

Erigeron breviscapus is an important herbal drug for the treatment of cardiovascular and cerebral vessel diseases. In this study, phenolic compounds were extracted from the whole plant of E. breviscapus and analyzed by high-performance liquid chromatography/electrospray ionization mass spectrometry. A total of 53 compounds were identified or tentatively characterized based on their UV and mass spectra. These compounds included caffeoylquinic acids (CQAs), CQA glucosides, malonyl-CQAs, acetyl-CQAs, caffeoyl-2,7-anhydro-3-deoxy-2-octulopyranosonic acids (CDOAs), caffeoyl-2,7-anhydro-2-octulopyranosonic acids (COAs), flavones, flavonols and flavonones. Most of them were reported for the first time from E. breviscapus and nineteen of them belonged to new compounds. The MS(n) spectra of CQA glucosides were similar to CQAs and they were discriminated by their retention times. No caffeic acid related ions (X(0) (-), Y(0) (-) and Z(0) (-)) were observed in MS(n) spectra of acyl-CQAs compared to those of CQAs. Fragment ions ((2,5)O(-), (3,6)O(-) and (4,6)O(-)) corresponding to ring cleavage were shown in MS(n) spectra of CDOAs and COAs, characteristic of this class of compounds. The 5,6,7-trihydroxyl-substituted flavones were dominant in E. breviscapus. Their [A--H](-) ions underwent the loss of a molecule of H(2)O, followed by the loss of CO, which was used to discriminate from other hydroxyl-substituted flavones. Our results are the first comprehensive analysis of E. breviscapus constituents and will be helpful for the quality control of the herb of E. breviscapus and its related preparations.     

Speciation of selenium compounds by open tubular capillary electrochromatography-inductively coupled plasma mass spectrometry

We introduce a T-type interface and a crossflow nebulizer to find ways to combine CEC with inductively coupled plasma MS (ICP-MS) detection for selenium speciation. For CEC separation, we employed a macrocyclic polyamine-bonded phase capillary as the separation column and a bare fused-silica capillary filled with the make-up liquid (0.05 M HNO3). The effect of nebulizer gas flow rate, make-up liquid flow, type, concentration and pH of the mobile phase on the separation have been studied. Tris buffer of 50 mM at pH 8.50 gave the best performance for selenium speciation. The reproducibility of the retention time indicated that sample injection by electrokinetic and nebulizer gas flow was better than that by self-aspiration alone. The detection limits for selenate, selenite, selenocystine and selenomethionine were found to be 2.40, 3.53, 12.86 and 11.25 ng/mL, respectively. Due to the high sensitivity and element-specific detection, as well as the high selectivity of the bonded phase, quantitative analysis of selenium speciation in urine was also achieved.     

Analysis of ultratrace triorganotin compounds in aquatic organisms by using capillary electrophoresis-inductively coupled plasma mass spectrometry

A microwave-assisted extraction used to extract trace triorganotin from aquatic organisms and a sensitive analytical method for the determination of ultratrace triorganotin (namely trimethyltin, triethyltin, tripropyltin and tributyltin) with capillary electrophoresis-inductively coupled plasma mass spectrometry were firstly described in this study. The extraction method is simple, effective and can be used to extract trace triorganotin in aquatic organisms within several min. The analytical method has a much lower detection limit of 0.2-0.7 ng Sn/mL for triorganotin compounds, and can be used to determine trace triorganotin in aquatic organisms directly without any derivatization and preconcentration. Using above methods, we have successfully determined trimethyltin, triethyltin, tripropyltin and tributyltin in dried Mya arenaria Linnaeus and Corbicula fluminea within 17 min with a recovery of 93-104% and a RSD (relative standard deviation, n = 6) of 2-5%. Our results showed that dried M. arenaria Linnaeus contained an extremely high tributyltin of 5.1 μg Sn/g dried weight, indicating that it may be a good biomarker for the organotin pollution in ocean.