Efficient continuous-wave YVO<Subscript>4</Subscript>/Nd:YVO<Subscript>4</Subscript> Raman laser at 1176 nm

We present a simple and compact continuous-wave (CW) 1176 nm laser based on self-frequency Raman conversion in continuous-grown YVO₄/Nd:YVO₄ composite crystal. With a composite crystal 30 mm in length, a maximum output power up to 1.84 W was achieved at the incident diode pump power of 23.6 W. Corresponding to overall optical conversion, the efficiency was 7.8% and the slope efficiency was 8.5%. The conversion efficiency has been doubled compared with the conventional Nd:YVO₄ CW self-frequency Raman laser. The excellent performance of this laser shows that the long continuous-grown YVO₄/Nd:YVO₄ composite crystal is promising in the application of CW Raman lasers and ideal for miniaturization.     

Electron diffraction study of various lattice defects in a Bi<Subscript>4</Subscript>Ge<Subscript>3</Subscript>O<Subscript>12</Subscript> crystal

Lattice defects in a scintillation detector made of Bi₄Ge₃O₁₂ (BGO) could severely impact detector efficiency via non-radiative transfer of electron excitation, thus making thorough investigations of these defects highly important. Here we present a combined experimental and theoretical study of two- and three-dimensional defects in a Czochralski-grown BGO crystal. Upon examination by transmission electron microscopy the selected-area electron diffraction (SAED) patterns in two neighboring parts of the specimen reveal different kinds of two- and three-dimensional defects. Three sub-grains misoriented at 2.47° with reference to each other and probable presence of stacking faults lying in {011} planes were observed in the first examined local area. The SAED image taken from an area in the close neighborhood is much more complicated and is explained in terms of the superposition of reflections from: (i) a partially textured GeO₂ second-phase inclusion; (ii) the basic lattice of BGO and (iii) a superlattice-like structure based on the BGO lattice. The atomic structure of such a superlattice-like structure was theoretically modeled and the corresponding simulated SAED patterns were found to be in good agreement with the experimentally observed one.     

110 W ceramic Nd<Superscript>3+</Superscript> : Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript> laser

A high-power, continuous-wave 0.6% Nd³⁺-doped ceramic Y₃Al₅O₁₂ (Nd:YAG) laser has been developed. 110 W laser output at 1064 nm was obtained, with a slope efficiency of about 41%. The M² factor was found to be around 6. The laser performance of the ceramic laser material was found to compare favorably with that obtained with single crystal Nd:YAG. PACS 42.55.-f; 42.55.Xi; 42.70.Hj     

Pulse characteristics of passively Q-switched 1.34 μm Nd:GdVO<Subscript>4</Subscript>/Co<Superscript>2+</Superscript>:MgAl<Subscript>2</Subscript>O<Subscript>4</Subscript> laser

Passively Q-switched output of a diode-pumped 1.34 μm Nd:GdVO₄ laser was demonstrated by using Co²⁺:MgAl₂O₄(Co²⁺:MALO) crystal as the saturable absorber for the first time. When the transmission of output mirror is 15%, the Q-switched pulse width is 110 ns and a corresponding average output power is 460 mW under the pump power of 9.69 W. The optical-optical conversion efficiency is 36%. At about 330 kHz repetition rate, the single Q-switched pulse energy and the peak power are about 1.39 μJ and 12.6 W, respectively.     

Er,Yb:YAl<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript>—efficient 1.5 μm laser crystal

This article summarizes the latest achievements in the growth and characterization of Er,Yb:YAl₃(BO₃)₄ laser crystal emitting in the 1.5–1.6 μm spectral range. Fundamental spectroscopic parameters relevant to laser performance of Er,Yb:YAB derived from absorption and emission spectra and from excited state dynamics are presented. The laser performance of Er,Yb:YAB in the cw and mode-locked regimes is reported.     

Structural properties of composite cathode material LiFePO<Subscript>4</Subscript>–Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

Composite cathode material LiFePO₄–Li₃V₂(PO₄)₃ is synthesized through a chemical reduction and lithiation using FeVO₄·xH₂O as both iron and vanadium sources. The structural properties of LiFePO₄–Li₃V₂(PO₄)₃ are investigated. X-ray diffraction results show the composite material containing olivine type LiFePO₄ and monoclinic Li₃V₂(PO₄)₃ phases. High-resolution transmission electron microscopy and energy-dispersive X-ray spectrometry results indicate that mutual doping effects take place between the LiFePO₄ and Li₃V₂(PO₄)₃ particles with V³⁺ doping the LiFePO₄ while Fe²⁺ dopes the Li₃V₂(PO₄)₃. LiFePO₄–Li₃V₂(PO₄)₃ nanocomposites are formed in the carbon webs. There is no structural compatibility between monoclinic (Li₃V₂(PO₄)₃) and olivine (LiFePO₄) domains in composite material LiFePO₄–Li₃V₂(PO₄)₃.     

Preparation and characterization of organic–inorganic hybrid compound [N(C<Subscript>4</Subscript>H<Subscript>9</Subscript>)<Subscript>4</Subscript>]<Subscript>2</Subscript>Cu<Subscript>2</Subscript>Cl<Subscript>6</Subscript>

Organic–inorganic hybrid sample [N(C₄H₉)₄]₂Cu₂Cl₆ was prepared via the reaction between copper chloride and tetrabutylammonium chloride. The compound was characterized by X-ray powder diffraction, IR, Raman, differential scanning calorimetry (DSC), DTA-TGA analysis and electrical impedance spectroscopy. DSC studies indicate a presence of one-phase transition at 343 K. The complex impedance of compound [N(C₄H₉)₄]₂Cu₂Cl₆ have been investigated in temperature and frequency ranges 300–380 K and 200 Hz–5 MHz, respectively. The Z′ and Z″ versus frequency plots are well fitted to an equivalent circuit model. The circuits consist of the parallel combination of bulk resistance R _p and constant phase elements CPE. The frequency dependence of the conductivity is interpreted in term of Jonscher's law: s(w) = s_dc + Awⁿ \sigma (\omega ){ } = {\sigma_{\rm{dc}}} + { }A{\omega^n} . The conductivity follows the Arrhenius relation. The variation of the value of these elements with temperatures confirmed the availability of the phase transition at 343 K detected by DSC and electrical measurements.     

Spectroscopic analysis of Pr<Superscript>3+</Superscript> crystal-field transitions in YAl<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript>

Yttrium aluminium borate single crystals, doped with 1 and 4 mol% of Pr³⁺, were analyzed in the wave number range 500–25000 cm⁻¹ and temperature range 9–300 K by means of high-resolution Fourier transform spectroscopy. In spite of the complex spectra, exhibiting broad and split lines, the energy level scheme was obtained for several excited manifolds. The careful analysis of the spectra as a function of the temperature allowed us to identify most of the sublevels of the ground manifold. The thermally induced line shift, well described by a single-phonon coupling model, could be exploited to provide information about the energy of the phonons involved. The orientation of the dielectric ellipsoid and of the dipole moments associated to a few transitions was also determined from linear dichroism measurements. The experimental data were fitted in the framework of the crystal-field theory, but the agreement was not satisfactory, as already reported for Pr³⁺ ion in other matrices. Additional discrepancies came from the dichroic spectra analysis and the line splitting, possibly associated to hyperfine interaction. Some causes which might be responsible for the difficulties encountered in the Pr³⁺ ion theoretical modelling are discussed.     

Synthesis and characterization of Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>·LiMn<Subscript>0.33</Subscript>Fe<Subscript>0.67</Subscript>PO<Subscript>4</Subscript>/C cathode materials

A new polyanionic cathode material, Li₃V₂(PO₄)₃·LiMn_0.33Fe_0.67PO₄/C for lithium-ion batteries, was synthesized using a sol-gel method and with N,N-dimethyl formamide as a dispersion agent. The analysis of electron transmission spectroscopy and X-ray diffraction revealed that the composite contained two phases. The material has high crystallinity with a grain size of 20–50 nm. The valence states of Mn, V, and Fe in the composite were analyzed by X-ray photoelectron spectroscopy. The electrochemical kinetics in Li₃V₂(PO₄)₃ is effectively enhanced by the incorporation of LiMnPO₄ and LiFePO₄, via structure modification and reduced Li diffusion length. The Li₃V₂(PO₄)₃·LiMn_0.33Fe_0.67PO₄/C materials displayed high rate capacity and steady cycle performance with discharge capacity remained 148 mAh g^?1 after 50 cycles at the rate of 0.2C. In particular, the composite exhibited excellent reversible capacities, with the values of 157, 134, 120, 102, and 94 mAh g^?1 at charge/discharge 0.2, 0.5, 1, 2, and 5C rates, respectively.     

Mass and kinetic energy distribution of the species generated by laser ablation of La<Subscript>0.6</Subscript>Ca<Subscript>0.4</Subscript>MnO<Subscript>3</Subscript>

The mass distributions of the species generated by laser ablation from a La_0.6Ca_0.4MnO₃ target using laser irradiation wavelengths of 193 nm, 266 nm and 308 nm have been investigated with and without a synchronized gas pulse of N₂O. The kinetic energies of the species are measured using an electrostatic deflection energy analyzer, while the mass distributions of the species were analyzed with a quadrupole mass filter. In vacuum (pressure 10⁻⁷ mbar), the ablation plume consists of metal atoms and ions such as La, Ca, Mn, O, LaO, as well as multiatomic species, e.g. LaMnO⁺. The LaO⁺ diatomic species are by far the most intense diatomic species in the plume, while CaO and MnO are only detected in small amounts. The interaction of a reactive N₂O gas pulse with the ablation plume leads to an increase in plume reactivity, which is desired when thin manganite films are grown, in order to incorporate the necessary amount of oxygen into the film. The N₂O gas pulse appears to have a significant influence on the oxidation of the Mn species in the plume, and on the creation of negative ions, such as LaO⁻,O⁻ and O₂⁻.     

Effect of process parameters and post-deposition annealing on the microwave dielectric and optical properties of pulsed laser deposited Bi<Subscript>1.5</Subscript>Zn<Subscript>1.0</Subscript>Nb<Subscript>1.5</Subscript>O<Subscript>7</Subscript> thin films

Bismuth Zinc niobate (Bi_1.5Zn_1.0Nb_1.5O₇) thin films were deposited by pulsed laser deposition (PLD) method on fused silica substrates at different oxygen pressures. The structural, microwave dielectric and optical properties of these thin films were systematically studied for both the as-deposited and the annealed films at 600°C. The as-deposited films were all amorphous in nature but crystallized on annealing at 600°C in air. The surface morphology as studied by atomic force microscopy (AFM) reveals ultra-fine grains in the case of as-deposited thin films and cluster grain morphology on annealing. The as-deposited films exhibit refractive index in the range of 2.36–2.53 (at a wavelength of 750 nm) with an optical absorption edge value of 3.30–3.52 eV and a maximum dielectric constant of 11 at 12.15 GHz. On annealing the films at 600°C they crystallize to the cubic pyrochlore structure accompanied by an increase in band gap, refractive index and microwave dielectric constant.     

Orientation dependence of electrical properties of 0.96Na<Subscript>0.5</Subscript>Bi<Subscript>0.5</Subscript>TiO<Subscript>3</Subscript>-0.04BaTiO<Subscript>3</Subscript> lead-free piezoelectric single crystal

In this paper, a single crystal of 0.96Na_0.5Bi_0.5TiO₃-0.04BaTiO₃ with dimensions of Φ 30×10 mm was grown by the top-seeded-solution growth method. X-ray powder diffraction results show that the as-grown crystal possesses the rhombohedral perovskite-type structure. The dielectric, piezoelectric and electrical conductivity properties were systematically investigated with 〈001〉, 〈110〉 and 〈111〉 oriented crystal samples. The room-temperature dielectric constants for the 〈001〉, 〈110〉 and 〈111〉 oriented crystal samples are found to be 650, 740 and 400 at 1 kHz. The (T _m, ε _m) values of the dielectric temperature spectra are almost independent of the crystal orientations; they are (306°C, 3718), (305°C, 3613) and (307°C, 3600) at 1 kHz for the 〈001〉, 〈110〉 and 〈111〉 oriented crystal. The optimum poling conditions were obtained by investigating the piezoelectric constants d ₃₃ as a function of poling temperature and poling electric field. For the 〈001〉 and 〈110〉 crystal samples, the maximum d ₃₃ values of 146 and 117 pC/N are obtained when a poling electric field of 3.5 kV/mm and a poling temperature of 80°C were applied during the poling process. The as-grown 0.96Na_0.5Bi_0.5TiO₃-0.04BaTiO₃ crystal possesses a relatively large dc electrical conductivity, especially at higher temperature, having a value of 1.98×10⁻¹¹ Ω⁻¹⋅m⁻¹ and 3.95×10⁻⁹ Ω⁻¹⋅m⁻¹ at 25°C and 150°C for the 〈001〉 oriented crystal sample.     

Diode-pumped Nd:YVO<Subscript>4</Subscript> and Nd:KGd(WO<Subscript>4</Subscript>)<Subscript>2</Subscript> 1.3 μm lasers passively Q-switched with PbS-doped glass

Diode-pumped Nd:YVO₄ and Nd:KGW lasers passively Q-switched with PbS-quantum dot-doped phosphate glass were demonstrated. For the Nd:YVO₄ laser, pulses 110 ns in duration with a 13% Q-switching efficiency were obtained. The absorption recovery time of the PbS-doped glass was measured to be 27±4 ps. Some recommendations for more efficient use of PbS-doped glasses for Q-switching of diode-pumped lasers are suggested on the basis of our analysis. Received: 29 July 2002 / Revised version: 18 September 2002 / Published online: 12 February 2003 RID="*" ID="*"Corresponding author. Fax: +375-17/232-6286, E-mail: savitski@eudoramail.com     

Heat capacity of the [N(C<Subscript>2</Subscript>H<Subscript>5</Subscript>)<Subscript>4</Subscript>]<Subscript>2</Subscript>CdBr<Subscript>4</Subscript> crystal in the temperature range 80–300 K

The heat capacity of the [[N(C₂H₅)₄]₂CdBr₄ crystal is measured by the calorimetric method in the temperature range from 80 to 300 K. It is revealed for the first time that the temperature dependence of the heat capacity C _p (T) exhibits an anomaly associated with the first-order phase transition occurring at the temperature T ₁ = 226.5 K. A long relaxation of the temperature of the crystal is observed in the temperature range 150–165 K.     

End-pumped Tm,Ho:NaY(WO<Subscript>4</Subscript>)<Subscript>2</Subscript> crystal laser at 2.07 μm

We presented an infrared laser output at 2.07 μm with Tm,Ho:NaY(WO₄)₂ crystal end-pumped by 795 nm laser diode at room temperature. The crystal was grown by the Czochralski method with the concentrations of 5 at % Tm³⁺ and 1 at % Ho³⁺. The highest output power was up to 2.7 W corresponding to the crystal temperature being controlled at 283 K. The overall optical conversion efficiency was 5.4% and the slop efficiency was 26%. The output characteristics and the laser threshold affected by the pulse duration and temperature have been studied. We found the stability of the output power was correlative with the crystal temperature heavily. In addition, the wider pulse duration of pump could promote the output power efficiently.     

O<Subscript>2</Subscript> photodesorption from AuO<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> and Au<Subscript>2</Subscript>O<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack>

Using time-resolved photoelectron spectroscopy, the decay channels of AuO₂⁻ and Au₂O₂⁻ following photoexcitation with 3.1-eV photons have been studied. For AuO₂⁻, a state with a rather long lifetime of 30 ps has been identified. Its decay path could not be determined but photodesorption can be excluded. For Au₂O₂⁻, the spectra indicate O₂ desorption after 3.1-eV photoexcitation on a time scale of 1 ps. While comparing these results on Au _n O₂⁻ with analogous data on Ag _n O₂⁻ clusters, a discernible pattern emerges: for dissociatively bound O₂(AuO₂⁻, Ag₃O₂⁻), there are long-living excited states which do not decay by oxygen desorption, while for molecular chemisorption (Au₂O₂⁻, Ag₂O₂⁻, Ag₄O₂⁻, Ag₈O₂⁻), the 3.1-eV photoexcitation triggers fast O₂ desorption with a high quantum yield.     

Terahertz spectroscopy of central and soft phonon modes in LuFe<Subscript>2</Subscript>O<Subscript>4</Subscript>

The terahertz dielectric response of LuFe₂O₄ is investigated by terahertz time-domain spectroscopy over a temperature range of 6–290 K. It is revealed that besides the central mode associated with the charge-ordered state, a soft TO₁ mode at below ∼240 K is identified indicating the existence of displacing ferroelectricity, in addition to the charge-ordering-induced ferroelectricity at below 320 K. The anomaly of the soft mode at ∼180 K reflects the magnetoelectric correlation between the soft TO₁ mode and the spin/charge fluctuations revealed recently. Finally, the magnetic property at below ∼240 K is discussed.     

Effect of annealing temperature on microstructures and optical properties of Ba<Subscript>0.9</Subscript>Sr<Subscript>0.1</Subscript>TiO<Subscript>3</Subscript> films

Evolution of microstructure and optical property with annealing temperature has been examined for Ba_0.9Sr_0.1TiO₃ films derived from one single precursor solution containing polyethylene glycol polymer. The films sintered below 750°C exhibit a uniform phase structure across the cross-sections and an ordinary optical thin film feature, while the Ba_0.9Sr_0.1TiO₃ films crystallized at 750°C or higher temperature render a lamellar texture consisting of dense and porous Ba_0.9Sr_0.1TiO₃ layers and a good performance as a one-dimensional photonic crystal. The discrepancy in cross-sectional morphology and reflectance property observed in these Ba_0.9Sr_0.1TiO₃ films has been preliminarily explained.     

Anomalous states of the structure of [Rb<Subscript>0.7</Subscript>(NH<Subscript>4</Subscript>)<Subscript>0.3</Subscript>]<Subscript>2</Subscript>SO<Subscript>4</Subscript> crystals in the temperature range 4.2–300 K

Crystals of [Rb_0.7(NH₄)_0.3]₂SO₄ solid solutions are studied using x-ray diffractometry in the temperature range 4.2–300 K. No anomalies are revealed in the temperature dependences of the lattice parameters and the volume of the host unit cell. A series of superstructure reflections observed along the basis axes corresponds to the guest lattice formed in the matrix of the host structure. From analyzing the axial ratio of these structures and their temperature dependences, it is concluded that the structure of the crystal has the form of an incommensurate composite. The guest structure of the composite at room temperature can be considered a set of chains that are not correlated along the b direction. In the plane perpendicular to the chain axes, these chains form a regular framework that is also incommensurate to the host lattice.