New one step synthesis of 3,5‐disubstituted 1,2,4‐oxadiazoles

Disubstituted 1,2,4‐oxadiazoles have been synthesized in good yields and good purity in one pot procedure by reaction of aromatic nitriles, hydroxylamine hydrochloride and sodium carbonate in ethylene glycol under heating at 195°C. The structures of different 1,2,4‐oxadiazoles obtained were confirmed by ¹H, ¹³C NMR and mass spectroscopy.     

A challenging synthesis of new 1,3,4‐thiadiazole derivatives starting from 2‐acylamino‐3,3‐dichloroacrylonitriles

Available 2‐acylamino‐3,3‐dichloroacrylonitriles, when treated with hydrazine hydrate, provide 2‐alkyl‐ or 2‐aryl‐5‐hydrazino‐1,3‐oxazole‐4‐carbonitriles that readily add alkyl or aryl isothiocyanates and the adducts formed recyclize on heating. Finally, the synthesis results in 5‐alkyl(aryl)amino‐1,3,4‐thiadiazol‐2‐yl(acylamino)acetonitriles or the products of their further cyclization, 2‐(5‐amino‐1,3‐ oxazol‐2‐yl)‐1,3,4‐thiadiazole derivatives. The structures of the novel substituted 1,3,4‐thiadiazoles are corroborated spectroscopically as well as by X‐ray diffraction method. © 2004 Wiley Periodicals, Inc. Heteroatom Chem 15:454–458, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.20041     

Dichotomy of 1,3‐dipolar cycloreversions in a tetrasubstituted 2,5‐dihydro‐1,3,4‐thiadiazole

The cycloaddition of diphenyldiazomethane ( 8 ) to 16 thioketones at 40°C which furnishes tetrasubstituted 2,5‐dihydro‐1,3,4‐thiadiazoles, is followed by rapid N₂ loss (see the preceding paper), with one exception: For the dihydrothiadiazole 10 , the N₂ extrusion is slower by a factor of 4900 than its formation from 8 and 2,2,6,6‐tetramethycyclohexanethione ( 7 ). This elimination of N₂ is a 1,3‐dipolar cycloreversion which affords a thiocarbonyl ylide + N₂ As a consequence of steric hindrance in the example of 10 , a concomitant second cycloreversion furnishes thiobenzophenone ( 12 ) and the diazocyclohexane derivative 13 in an equilibrium. The complex kinetic system of Scheme 2 is confirmed by the irreversible interception of 13 with thioketone 14 . The structural conditions for retarded N₂ extrusions from dihydrothiadiazoles are discussed. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:443–448, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20263     

New tetracyclic compounds containing the β-carboline moiety

Oxidation of 1-methyl-3-methoxycarbonyl-β-carboline with selenium dioxide gave 1-formyl-3-methoxycarbonyl-β-carboline II . Compound II reacted with acetic or propionic anhydride to give easily the 2-methoxycarbonyl-6H-indolo[3,2,1-d,e][1,5]naphthyridin-6-ones III ; reaction of II with some primary amines led to the formation of the Schiff bases IV , which were reduced to the 1-aminomethyl-3-methoxycarbonyl-β-carbolines V with sodium borohydride. Cyclization of V with aqueous formaldehyde led to the pyrimido[3,4,5-lm]pyrido[3,4-b]indoles VI . Analogously, cyclization with formaldehyde, acetone or 1,1′-carbonyldiimidazole of the 3-aminomethyl- 1,2,3,4-tetrahydro-β-carbolines VIII , obtained by reaction of 3-methoxycarbonyl-1,2,3,4-tetrahydro-β-carboline VII with amines followed by lithium aluminium hydride reduction of the resulting amides, gave the imidazo[1′,5′-1,6]pyrido[3,4-b]indoles IX and X . Dieckmann cyclization of 3-methoxycarbonyl-2-[(3-ethoxycarbonyl)-1-propyl]-1,2,3,4-tetrahydro-β-carboline XI led to a 1:1 mixture of the β-ketoesters XII and XIII , which underwent deethoxycarbonylation to 5,6,8,9,10,11,11a,12-octahydroindolo[3,2-b]quinolizin-11-one XIV . Finally, the polyphosphoric acid (or esters) catalyzed cyclization of the N-acyl derivatives XVI of 3-hydrazinocarbonyl-β-carboline XV led smoothly to the 3-(1,3,4-oxadiazol-2-yl)-β-carbolines XVII .     

Novel regioselective synthesis of 3′H,4H‐spiro[chromene‐3,2′‐[1,3,4]thiadiazol]‐4‐one containing compounds

A variety of 3″,5″‐diaryl‐3″H,4′H‐dispiro[cyclohexane‐1,2′‐chromene‐3′,2″‐[1,3,4]thiadiazol]‐4′‐ones 3a‐c were synthesized regioselectively through the reaction of 4′H,5H‐trispiro[cyclohexane‐1,2′‐chromene‐3′,2″‐[1,3,4]oxadithiino[5,6‐c]chromene‐5″,1″′‐cyclohexan]‐4′‐one ( 1 ) with nitrilimines (generated in situ via triethylamine dehydrohalogenation of the corresponding hydrazonoyl chlorides 2a‐c ) in refluxing dry toluene. Single crystal X‐ray diffraction studies of 3a,b add support for the established structure. Similarly, 3′,5′‐diaryl‐2,2‐dimethyl‐3′H,4H‐spiro[chromene‐3,2′‐[1,3,4]thiadiazol]‐4‐ones 5a‐c were obtained in a regioselective manner through the reaction of 2,2,5′,5′‐tetramethyl‐4H,5′H‐spiro[chromene‐3,2′‐[1,3,4]oxadithiino[5,6‐c]chromen]‐4‐one ( 4a ) with nitrilimines under similar reaction conditions. On the other hand, reaction of 2,5′‐diethyl‐2,5′‐dimethyl‐4H,5′H‐spiro[chromene‐3,2′‐[1,3,4]oxadithiino‐[5,6‐c]chromen]‐4‐one ( 4b ) with nitrilimines in refluxing dry toluene afforded the corresponding 3′,5′‐diaryl‐2‐ethyl‐2‐methyl‐3′H,4H‐spiro[chromene‐3,2′‐[1,3,4]thiadiazol]‐4‐ones 5d‐f as two unisolable diastereoisomeric forms.     

NMR spectroscopic characterization of new 2,3‐dihydro‐1,3,4‐thiadiazole derivatives

The ¹H and ¹³C NMR resonances of twenty‐seven 2,2‐dimethyl‐5‐(2‐nitrophenyl‐5‐substituted)‐2,3‐dihydro‐1,3,4‐thiadiazoles, and twenty‐seven 3‐acyl‐5‐(2‐amino‐5‐substituted)‐2,2‐dimethyl‐2,3‐dihydro‐1,3,4‐thiadiazoles were assigned completely using the concerted application of one‐dimensional and two‐dimensional experiments (DEPT, HMQC and HMBC). NOESY experiments, X‐ray crystallography and conformational analysis confirm the preferred conformation of these compounds. Copyright © 2012 John Wiley & Sons, Ltd.     

Structural characterization of the aquaporin inhibitor 2‐nicotinamido‐1,3,4‐thiadiazole

Nicotinamides are a class of compounds with a wide variety of applications, from use as antimicrobial agents to inhibitors of biological processes. These compounds are also cofactors, which are necessary components of metabolic processes. Structural modification gives rise to the activities observed. Similarly, 1,3,4‐thiadiazoles have been shown to possess antioxidant, antimicrobial, or anti‐inflammatory biological activity. To take advantage of each of the inherent characteristics of the two aforementioned functional groups, 2‐nicotinamido‐1,3,4‐thiadiazole, C₈H₆N₄OS, was synthesized. Since defining chemical connectivity is paramount in understanding biological activity, in this report, the structural characterization of 2‐nicotinamido‐1,3,4‐thiadiazole has been carried out using X‐ray crystallographic methods. The NMR‐derived assignments were made possible by utilizing one‐ (1D) and two‐dimensional (2D) NMR techniques. In addition, UV–Visible and IR spectroscopies, and elemental analysis were used to fully characterize the product synthesized by the one‐step reaction between nicotinoyl chloride hydrochloride and 2‐amino‐1,3,4‐thiadiazole. Computational parameters related to blood–brain barrier permeability are also presented.     

Synthesis of two 1,3‐2,4‐calix[4]bis‐crown ethers containing two 1,2‐phenylene and one pyridine or anisole units in each crown ether moiety

Syntheses of 1,3–2,4‐calix[4]bis‐crown ethers ( 1 and 2 ) fixed in the 1,3‐alternate conformation by 1,3‐ and 2,4‐bridges made of two modified polyether chains each containing two 1,2‐phenylene residues and one pyridine or anisyl unit are reported. The structures of compounds 1 and 2 were established by ¹H nmr, ¹³C nmr, hrms and elemental analyses.     

A new polymer acceptor containing naphthalene diimide and 1,3,4‐thiadiazole for all‐polymer solar cells

A n‐type conjugated polymer containing naphthalene diimide (NDI) and 1,3,4‐thiadiazole (TZ) moieties, named PNTZ, has been synthesized and applied for all‐polymer solar cells (all‐PSCs). By the incorporation of TZ unit into the polymer main chains, the lowest unoccupied molecular orbital level of this polymer has been adjusted effectively. In addition, the electron‐acceptor PNTZ shows a broad absorption spectrum in the range of 300–700 nm, and possesses complementary absorption spectrum with the electron‐donor PTB7‐Th. On the basis of PNTZ as the acceptor and PTB7‐Th as the donor, the all‐PSCs are fabricated. After optimization, the well blend morphologies with a continuous D/A interpenetrating network are observed and the best all‐PSC device exhibits a power conversion efficiency of 4.35% with a high short‐circuit current density of 13.26 mA cm^?2. This research demonstrates that the TZ‐containing polymer PNTZ is a promising non‐fullerene acceptor for high efficiency all‐PSCs. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 990–996     

Synthesis of new proton‐ionizable crown ether compounds containing substituted lh‐pyridin‐4‐one subcyclic units

Five novel pyridono‐18‐crown‐6 ( 10‐14 ) and two new benzyloxy‐substituted pyridino‐18‐crown‐6 ( 15 and 16 ) ligands have been prepared. By the catalytic hydrogenative removal of the benzyl group from the benzyloxy moiety at position 4 of the pyridine ring of 15 and 16 , pyridono‐18‐crown‐6 ethers 5 and 12 were obtained. These ligands were transformed to their 3,5‐dibromo ( 10 and 13 ) and 3,5‐dinitro derivatives ( 11 and 14 ) by treatment with bromine in methylene chloride and nitric acid in acetic anhydride, respectively. The latter proton‐ionizable crown ethers have pK_avalues of about 7.5 for 10 and 13 and 4.5 for 11 and 14 . Thus, they are good candidates for complexation and proton‐coupled transport of selected cations.     

Proton-Ionizable crown compounds. 7. Synthesis of new crown compounds containing the dialkylhydrogenphosphate moiety

A new series of macrocyclic ligands containing the dialkylhydrogenphosphate moiety is reported. These compounds were prepared by reacting phosphorus oxychloride with the appropriate oligoethylene glycol followed by a hydrolysis step. One of these new macrocyclic compounds transported the alkali metal cations as well as lead, zinc and silver ions.     

New one step synthesis of 3,5‐disubstituted pyrazoles under microwave irradiation and classical heating

A convenient one pot procedure for the synthesis of 3,5-disubstituted pyrazoles by condensation of chalcones, hydrazine hydrate and sulfur in ethanol under microwave irradiation and conventional heating method is reported. The hydrogen sulfide is produced during the reaction. The pyrazoles are obtained in good yields and excellent state of purity. The structures of new compounds were confirmed by IR, ¹H, and ¹³C NMR, MS and elemental analysis.     

Corrosion inhibition and performance evaluation on 2,5‐diaryl‐1,3,4‐thiadiazole and its derivatives

Using electrochemical impedance spectroscopy (EIS) and scanning electronic microscopy (SEM), this paper evaluated the inhibition effect of four 2,5‐diaryl‐1,3,4‐thiadiazole and its derivatives named 2,5‐diphenly‐1,3,4‐thiadiazole (DPTD), 2,5‐di(2‐hydroxyphenly)‐1,3,4‐thiadiazole (2‐DHPTD), 2,5‐di(3‐hydroxyphenly)‐1,3,4‐thiadiazole (3‐DHPTD), and 2,5‐di(4‐hydroxyphenly)‐1,3,4‐thiadiazole (4‐DHPTD) on silver strip corrosion in 50 mg/l sulfur–ethanol solution under room temperature. The experiments indicated that the inhibition efficiency increased with increasing inhibitor concentrations, and the increasing order was (4‐DHPDT) > (3‐DHPDT) > (2‐DHPDT) > (DPDT). Quantum chemical calculation was applied to correlate inhibition performances with their electronic structural parameters of thiadiazole derivatives. Molecular dynamics simulations (DFT) were used to optimize the equilibrium configurations of the inhibitor molecules on the silver surface and to investigate the molecular structure effect on the corrosion inhibition efficiency. The efficiency order of the investigated inhibitors, which was obtained by experimental results, was verified by theoretical calculations. Contact angle (CA) analysis was also carried out, and finally confirmed the existence of the adsorbed film which prevailed in addition of thiadiazole derivatives. CA analysis indicated that the film of n‐DHPTD (n = 2,3,4) was hydrophilic, owing to two hydroxyl groups in their molecular. The adsorption of these compounds onto silver strip from 50 mg/l S‐ethanol system obeys Langmuir adsorption isotherm, and it belongs to mixed‐type adsorption mainly dominated by chemisorption. Copyright © 2016 John Wiley & Sons, Ltd.     

Microwave‐assisted synthesis and anti‐HIV activity of new benzenesulfonamides bearing 2,5‐disubstituted‐1,3,4‐oxadiazole moiety

New benzenesulfonamides, most of which are chiral, incorporating 1,3,4‐oxadiazole, and selected amino acid entities have been synthesized, using the microwave irradiation method. Most of the synthesized compounds were tested against HIV activity. © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:425–431, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20316     

Synthesis and biological activities of a novel series of 3,6‐disubstituted‐1,2,4‐triazolo‐[3,4‐b]‐1,3,4‐thiadiazoles containing gem‐dimethylbenzyl moiety

A novel series of 3,6‐disubstituted‐1,2,4‐triazolo‐[3,4‐b]‐1,3,4‐thiadiazoles (6a–r) containing gem‐dimethyl benzyl moiety were prepared by the condensation of 4‐amino‐3‐aryl/aralkyl substituted‐5‐mercapto‐1,2,4‐triazoles ( 5a , 5b , 5c ) with various fluoro substituted aromatic acids in the presence of POCl₃. IR, ¹H NMR, ¹³C NMR, 2D NMR (COSY), and mass spectral data confirmed the structures of all the synthesized compounds. All the compounds were also screened for their antibacterial, antifungal and analgesic activities. Compounds 6b , 6d , 6f , 6g , 6h , 6i , 6m , 6n , 6o , 6p , and 6r exhibited promising antibacterial and compounds 6a , 6d , 6f , 6g , 6h , 6k , 6m , 6o , 6p , and 6q showed significant analgesic activities. J. Heterocyclic Chem., (2011)     

Convenient Synthesis and Biological Activity of Mono and Diacyl 2,5‐Dimercapto‐1,3,4‐thiadiazole Derivatives

New derivatives of 2,5‐dimercapto‐1,3,4‐thiadiazole substituted both at one or two exocyclic sulfur atoms with a series of aroyl or ethoxycarbonyl groups were synthesized in reactions of 2,5‐dimercapto‐1,3,4‐thiadiazole salts with appropriate acid chlorides or ethyl chloroformate in mild conditions. The products were characterized by spectroscopy (¹H NMR, ¹³C NMR, IR, and HRMS). Some from the synthesized compounds were screened in vitro and in vivo for antibacterial and antifungal activities against a panel of reference strains of microorganisms. The study revealed that ethyl S‐(5‐mercapto‐1,3,4‐thiadiazol‐2‐yl) carbonothioate seems to be the most active and versatile compound against Gram‐positive bacteria, Gram‐negative bacteria, and plant pathogenic fungi.     

Ligand‐forced dimerization of copper(I)–olefin complexes bearing a 1,3,4‐thiadiazole core

As an important class of heterocyclic compounds, 1,3,4‐thiadiazoles have a broad range of potential applications in medicine, agriculture and materials chemistry, and were found to be excellent precursors for the crystal engineering of organometallic materials. The coordinating behaviour of allyl derivatives of 1,3,4‐thiadiazoles with respect to transition metal ions has been little studied. Five new crystalline copper(I) π‐complexes have been obtained by means of an alternating current electrochemical technique and have been characterized by single‐crystal X‐ray diffraction and IR spectroscopy. The compounds are bis[μ‐5‐methyl‐N‐(prop‐2‐en‐1‐yl)‐1,3,4‐thiadiazol‐2‐amine]bis[nitratocopper(I)], [Cu₂(NO₃)₂(C₆H₉N₃S)₂], (1), bis[μ‐5‐methyl‐N‐(prop‐2‐en‐1‐yl)‐1,3,4‐thiadiazol‐2‐amine]bis[(tetrafluoroborato)copper(I)], [Cu₂(BF₄)₂(C₆H₉N₃S)₂], (2), μ‐aqua‐bis{μ‐5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine}bis[nitratocopper(I)], [Cu₂(NO₃)₂(C₅H₇N₃S₂)₂(H₂O)], (3), μ‐aqua‐(hexafluorosilicato)bis{μ‐5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine}dicopper(I)–acetonitrile–water (2/1/4), [Cu₂(SiF₆)(C₅H₇N₃S₂)₂(H₂O)]·0.5CH₃CN·2H₂O, (4), and μ‐benzenesulfonato‐bis{μ‐5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine}dicopper(I) benzenesulfonate–methanol–water (1/1/1), [Cu₂(C₆H₅O₃S)(C₅H₇N₃S₂)₂](C₆H₅O₃S)·CH₃OH·H₂O, (5). The structure of the ligand 5‐methyl‐N‐(prop‐2‐en‐1‐yl)‐1,3,4‐thiadiazol‐2‐amine (Mepeta ), C₆H₉N₃S, was also structurally characterized. Both Mepeta and 5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine (Pesta ) (denoted L ) reveal a strong tendency to form dimeric {Cu₂L ₂}²⁺ fragments, being attached to the metal atom in a chelating–bridging mode via two thiadiazole N atoms and an allylic C=C bond. Flexibility of the {Cu₂(Pesta )₂}²⁺ unit allows the Cu^I atom site to be split into two positions with different metal‐coordination environments, thus enabling the competitive participation of different molecules in bonding to the metal centre. The Pesta ligand in (4) allows the Cu^I atom to vary between water O‐atom and hexafluorosilicate F‐atom coordination, resulting in the rare case of a direct Cu^I…FSiF₅²⁻ interaction. Extensive three‐dimensional hydrogen‐bonding patterns are formed in the reported crystal structures. Complex (5) should be considered as the first known example of a Cu^I(C₆H₅SO₃) coordination compound. To determine the hydrogen‐bond interactions in the structures of (1) and (2), a Hirshfeld surface analysis has been performed.     

New proton-ionizable macrocyclic compounds containing one and two triazole subcyclic units — synthesis and complexation properties

A series of new macrocyclic compounds containing one and two proton-ionizable triazole subcyclic units have been prepared and characterized. These triazolo-crowns containing benzo, tert-butylbenzo or cyclohexano lipophilic groups show varying solubilities in chloroform. The bistriazolo-crowns dissolved in chloroform are highly effective for extraction of lead, mercury, and gold from aqueous solutions.