Synthesis and optical properties of cis‐dibenzothiazolyldibenzo‐24‐crown‐8

New crown ether carrying two fluorionophores of cis‐dibenzothiazolyldibenzo‐24‐crown‐8 was synthesized from cis‐diformyldibenzo‐24‐crown‐8 and 2‐aminobenzenethiol. The binding behavior and the optical properties of the crown ether were examined through UV‐visible spectroscopy and fluorescence spectroscopy. When complexed with Na⁺, K⁺, Rb⁺, and Cs⁺ ions, it led to intramolecular charge transfer and caused the changes of the fluorescence spectra. The protonation of the crown ether was also studied. With protonation using CF₃COOH, the absorption bands and the fluorescence spectroscopy changed, the maximal fluorescence wavelengths red shifted and the fluorescence intensity with the maximum at 433 nm enhanced strongly. J. Heterocyclic Chem., (2011).     

Synthesis and Optical Properties of 2,13‐Dibenzothiazol‐2′‐yldibenzo[b,k]‐18‐crown‐6

A new crown ether of 2,13‐dibenzothiazol‐2′‐yldibenzo[b,k]‐18‐crown‐6 was synthesized from 2,13‐diformyl‐ dibenzo[b,k]‐18‐crown‐6 with 2‐aminothiophenol. The binding behavior and the optical properties of the crown ether were examined through UV‐visible spectroscopy and fluorescence spectroscopy. When complexed with Na⁺, K⁺, Rb⁺ and Cs⁺ ions, it led to intramolecular charge transfer and caused the changes of the fluorescence spectra. The protonation of the crown ether was also studied.     

The synthesis of novel crown ethers,part ix, 3‐phenyl chromenone‐crown ethers

3‐Phenyl‐ and 3‐(p‐methoxyphenyl)‐7,8‐dihydroxy and ‐6,7‐dihydroxychromenones were prepared from ethyl 3‐oxo‐2‐phenylpropanoate, ethyl 3‐oxo‐2‐(4‐methoxyphenyl)‐propanoate and the trihydroxy benzenes in H₂SO₄. 3‐Aryl‐7,8‐ and 3‐aryl‐6,7‐dihydroxy‐2H‐chromenones reacted with the bis‐dihalides of poly‐glycols in DMF/MeCO₃ to afford 12‐Crown‐4, 15‐Crown‐4 and 18‐Crown‐6‐chromenones. The products were identified with IR, 1H NMR, low and high resolution mass spectroscopy and elemental analysis. Some 1:1 cation association constants, K_b, of the 3‐phenyl chromenone crown ethers with Li⁺, Na⁺, K⁺ and Rb⁺ cations were studied by steady state emission fluorescence spectroscopy; K_b chromenone‐crown complexes displayed crown ether‐cation binding selectivity rules properly in acetonitrile.     

The synthesis of novel crown ethers,part X, 4‐propyl‐and 3‐ethyl‐4‐methylchromenone‐crown ethers

Starting from ethyl propionylacetate, and ethyl 2‐ethylacetoacetate we prepared 4‐propyl‐7,8‐, 4‐propyl‐6,7‐, 3‐ethyl‐4‐methyl‐7,8‐ and 3‐ethyl‐4‐methyl‐6,7‐dihydroxy‐2H‐chromenones which were allowed to react with the bis‐dihalides or ditosylates of glycols in DMF/Na₂CO₃ to afford the 6,7‐ and 7,8‐chromenone derivatives of 12‐crown‐4, 15‐crown‐4 and 18‐crown‐6. The products were identified using ir, ¹³C and ¹H nmr, ms and high resolution mass spectroscopy. The cation selectivities of chromenone crown ethers with Li⁺, Na⁺ and K⁺ cations were estimated from the steady state emission fluorescence spectra of free and cation complexed chromenone macrocyclic ethers in acetonitrile.     

Fine‐tuning of electromembrane extraction selectivity using 18‐crown‐6 ethers as supported liquid membrane modifiers

Selectivity of electromembrane extractions (EMEs) was fine‐tuned by modifications of supported liquid membrane (SLM) composition using additions of various 18‐crown‐6 ethers into 1‐ethyl‐2‐nitrobenzene. Gradually increased transfer of K⁺, the cation that perfectly fits the cavity of 18‐crown‐6 ethers, was observed for EMEs across SLMs modified with increasing concentrations of 18‐crown‐6 ethers. A SLM containing 1% w/v of dibenzo‐18‐crown‐6 in 1‐ethyl‐2‐nitrobenzene exhibited excellent selectivity for EMEs of K⁺. The established host–guest interactions between crown ether cavities in the SLM and potassium ions in donor solution ensured their almost exhaustive transfer into acceptor solution (extraction recovery ～92%) within 30 min of EME at 50 V. Other inorganic cations were not transferred across the SLM (Ca²⁺ and Mg²⁺) or were transferred negligibly (NH₄⁺, Na⁺; extraction recovery < 2%) and had only subtle effect on EMEs of K⁺. The high selectivity of the tailor‐made SLM holds a great promise for future applications in EMEs since the range of similar selective modifiers is very broad and may be applied in various fields of analytical chemistry.     

Synthesis and Characterization of a Novel Thermo‐Sensitive Copolymer of N‐Isopropylacrylamide and Dibenzo‐18‐crown‐6‐diacrylamide

Summary: A series of novel, thermo‐sensitive copolymers with different molar ratios of N‐isopropylacrylamide (NIPAM) and hydrophobic cis‐dibenzo‐18‐crown‐6‐diacrylamide (cis‐DBCAm) were prepared via free‐radical copolymerization. cis‐DBCAm with polymerizable end groups was successfully synthesized by reacting the corresponding amino crown ether with acryloyl chloride. The copolymers were characterized by FT‐IR and elemental analysis, and the thermo‐sensitivities of the copolymers were evaluated by measuring their lower critical solution temperatures (LCSTs) in the absence or presence of various metal ions. The results indicated that incorporation of cis‐DBCAm lowered LCSTs, and that the LCSTs of the copolymers decreased with the increase in cis‐DBCAm content in the copolymers. When the cavities of the crown ether units captured either K⁺ or Cs⁺ ions, the LCST of the respective copolymer–metal ion complex was further decreased, whereas the capture of Na⁺ or Li⁺ ions did not have a significant influence on the LCSTs of the copolymers.

Incorporation of cis‐DBCAm into PNIPAM resulted in a lower LCST. The LCST was decreased more when the cavities of the crown ether units captured K⁺ ions.     

A Highly K+‐Selective Phenylaza‐[18]crown‐6‐Lariat‐Ether‐Based Fluoroionophore and Its Application in the Sensing of K+ Ions with an Optical Sensor Film and in Cells

Herein, we report the synthesis of two phenylaza‐[18]crown‐6 lariat ethers with a coumarin fluorophore ( 1 and 2 ) and we reveal that compound 1 is an excellent probe for K⁺ ions under simulated physiological conditions. The presence of a 2‐methoxyethoxy lariat group at the ortho position of the anilino moiety is crucial to the substantially increased stability of compounds 1 and 2 over their lariat‐free phenylaza‐[18]crown‐6 ether analogues. Probe 1 shows a high K⁺/Na⁺ selectivity and a 2.5‐fold fluorescence enhancement was observed in the presence of 100 mM K⁺ ions. A fluorescent membrane sensor, which was prepared by incorporating probe 1 into a hydrogel, showed a fully reversible response, a response time of 150 s, and a signal change of 7.8 % per 1 mM K⁺ within the range 1–10 mM K⁺. The membrane was easily fabricated (only a single sensing layer on a solid polyester support), yet no leaching was observed. Moreover, compound 1 rapidly permeated into cells, was cytocompatible, and was suitable for the fluorescent imaging of K⁺ ions on both the extracellular and intracellular levels.     

Absorption and fluorescence properties of acridinones,thioacridinones, aminoacridines and related crown ethers

We report a study on the absorptive and emissive properties of 9‐acridinones, 9‐thioacridinones and 9‐aminoacridines including six crown ether derivatives. The effect of solvents and of the addition of cations (Na⁺, K⁺, Ca2⁺ and Mg2⁺) on these properties has been studied. The absorption of the crown ether derivative of 9‐thioacridinone is sensitive to solvents while the fluorescence of crown ethers derived from 9‐aminoacridines shows some specificity towards cations. Empirical modeling was used to discuss the emission characteristics of these compounds.     

Supramolecular Fullerene Chemistry: A Comprehensive Study of Cyclophane‐Type Mono‐ and Bis‐Crown Ether Conjugates of C70

The covalently templated bis‐functionalization of C₇₀, employing bis‐malonate 5 tethered by an anti‐disubstituted dibenzo[18]crown‐6 (DB18C6) ether, proceeds with complete regiospecificity and provides two diastereoisomeric pairs of enantiomeric C₇₀ crown ether conjugates, (±)‐ 7a and (±)‐ 7b , featuring a five o'clock bis‐addition pattern that is disfavored in sequential transformations (Scheme 1). The identity of (±)‐ 7a was revealed by X‐ray crystal‐structure analysis (Fig. 6). With bis‐malonate 6 containing a syn‐disubstituted DB18C6 tether, the regioselectivity of the macrocylization via double Bingel cyclopropanation changed completely, affording two constitutionally isomeric C₇₀ crown ether conjugates in a ca. 1 : 1 ratio featuring the twelve ( 16 ) and two o'clock ((±)‐ 15 ) addition patterns, respectively (Scheme 3). The X‐ray crystal‐structure analysis of the twelve o'clock bis‐adduct 16 revealed that a H₂O molecule was included in the crown ether cavity (Figs. 7 and 8). Two sequential Bingel macrocyclizations, first with anti‐DB18C6‐tethered ( 5 ) and subsequently with syn‐DB18C6‐tethered ( 6 ) bis‐malonates, provided access to the first fullerene bis‐crown ether conjugates. The two diastereoisomeric pairs of enantiomers (±)‐ 28a and (±)‐ 28b were formed in high yield and with complete regioselectivity (Scheme 9). The cation‐binding properties of all C₇₀ crown‐ether conjugates were determined with the help of ion‐selective electrodes (ISEs). Mono‐crown ether conjugates form stable 1 : 1 complexes with alkali‐metal ions, whereas the tetrakis‐adducts of C₇₀, featuring two covalently attached crown ethers, form stable 1 : 1 and 1 : 2 host‐guest complexes (Table 2). Comparative studies showed that the conformation of the DB18C6 ionophore imposed by the macrocyclic bridging to the fullerene is not particularly favorable for strong association. Reference compound (±)‐ 22 (Scheme 4), in which the DB18C6 moiety is attached to the C₇₀ sphere by a single bridge only and, therefore, possesses higher conformational flexibility, binds K⁺ and Na⁺ ions better by factors of 2 and 20, respectively. Electrochemical studies demonstrate that cation complexation at the crown ether site causes significant anodic shifts of the first reduction potential of the appended fullerene (Table 3). In case of the C₇₀ mono‐crown ether conjugates featuring a five o'clock functionalization pattern, addition of 1 equiv. of KPF₆ caused an anodic shift of the first reduction wave in the cyclic voltammogram (CV) by 70 to 80 mV, which is the result of the electrostatic effect of the K⁺ ion bound closely to the fullerene core (Fig. 14). Addition of 2 equiv. of K⁺ ions to C₇₀ bis‐crown ether conjugates resulted in the observation of only one redox couple, whose potential is anodically shifted by 170 mV with respect to the corresponding wave in the absence of the salt (Fig. 16). The synthesis and characterization of novel tris‐ and tetrakis‐adducts of C₇₀ are reported (Schemes 5 and 6). Attempts to prepare even more highly functionalized derivatives resulted in the formation of novel pentakis‐ and hexakis‐adducts and a single heptakis‐adduct (Scheme 7), which were characterized by ¹H‐ and ¹³C‐NMR spectroscopy (Fig. 10), as well as matrix‐assisted laser‐desorption‐ionization mass spectrometry (MALDI‐TOF‐MS). Based on predictions from density‐functional‐theory (DFT) calculations (Figs. 12 and 13), structures are proposed for the tris‐, tetrakis‐, and pentakis‐adducts.     

Synthesis of Novel 4‐((Substituted bis‐indolyl)methyl)‐benzo‐15‐crown‐5 for the Colorimetric Detection of Hg2+ Ions in an Aqueous Medium

A practical, two‐step synthesis of novel 4‐(substituted bis‐indolyl)methyl)benzo‐15‐crown‐5 has been reported. The strategy employed for the synthesis of the desired molecules involved Duff formylation of benzo‐15‐crown‐5 to get 4‐formyl benzo‐15‐crown‐5 followed by subsequent reactions with substituted indoles in trifluoroacetic acid to yield novel 4‐(substituted bis‐indolyl)methyl)benzo‐15‐crown‐5 in moderate to good yield. One of the reported novel molecule tested for the complexation behavior with various metal cations, such as Li⁺, Na⁺, K⁺, Mg²⁺ Ca²⁺, Al³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Sn²⁺, Ba²⁺, Hg²⁺, and Pb²⁺, showed a visual colorimetric probe for the detection of mercury cations (Hg²⁺) in an aqueous medium.     

Enantiomeric Separations in Capillary Electrochromatography with Crown Ether‐Capped β‐Cyclodextrin‐Bonded Silica Particles as Chiral Stationary Phase

Two novel types of crown ether capped β‐cyclodextrin (β‐CD) bonded silica, namely, 4′‐aminobenzo‐X‐crown‐Y (X=15, 18 and Y=5, 6, resp.) capped [3‐(2‐O‐β‐cyclodextrin)‐2‐hydroxypropoxy] propylsilyl‐appended silica, have been prepared and used as stationary phases in capillary electrochromatography (CEC) to separate chiral compounds. The two stationary phases have a chiral selector with two recognition sites: crown ether and β‐CD. They exhibit excellent enantioselectivity in CEC for a wide range of compounds. After inclusion of metal ions (Na⁺ or K⁺) from the running buffer into the crown ether units, the stationary phases become positively charged and can provide extra electrostatic interaction with ionizable solutes and enhance the dipolar interaction with polar neutral solutes. This enhances the host‐guest interaction with the solute and improves chiral recognition and enantioselectivity. Due to the cooperation of the anchored β‐CD and the crown ether, this kind of crown ether capped β‐CD bonded phase shows better enantioselectivity than either β‐CD‐ or crown ether bonded phases only. These new types of stationary phases have good potential for fast chiral separation with CEC.     

Synthesis and Spectroscopic Characterization of New Double‐Armed Benzo‐15‐Crown‐5 Derivatives and Their Sodium Complexes

Double‐armed crown ether aldehydes ( 1–3 ) were synthesized from the reaction of 2 equiv salicylaldehyde, 4‐hydroxy‐3‐methoxybenzaldehyde (vanillin), and 3‐hydroxy‐4‐methoxybenzaldehyde (iso‐vanillin) with 4′,5′‐bis(bromomethyl)benzo‐15‐crown‐5. New crown ethers imine compounds ( 4–9 ) were synthesized by the condensation of corresponding crown ether aldehydes ( 1–3 ) with 4‐amino‐1,2‐dihydro‐1,5‐dimethyl‐2‐phenyl‐3H‐pyrazole‐3‐one and 2‐furan‐2‐yl‐methylamine. Sodium complexes ( 1a–9a) of the crown compounds form crystalline 1:1 (Na⁺:ligand) stoichiometries and were also synthesized. The structures of the crown ether aldehydes ( 1–3 ), imine compounds ( 4–9 ), and complexes ( 1a–9a ) were confirmed on the basis of elemental analyses, IR, ¹H and ¹³C NMR, and mass spectrometry. © 2013 Wiley Periodicals, Inc. Heteroatom Chem 24:100–109, 2013; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.21070     

Ion‐Responsive Hemin–G‐Quadruplexes for Switchable DNAzyme and Enzyme Functions

Programmed nucleic acid sequences undergo K⁺ ion‐induced self‐assembly into G‐quadruplexes and separation of the supramolecular structures by the elimination of K⁺ ions by crown ether or cryptand ion‐receptors. This process allows the switchable formation and dissociation of the respective G‐quadruplexes. The different G‐quadruplex structures bind hemin, and the resulting hemin–G‐quadruplex structures reveal horseradish peroxidase DNAzyme catalytic activities. The following K⁺ ion/receptor switchable systems are described: 1) The K⁺‐induced self‐assembly of the Mg²⁺‐dependent DNAzyme subunits into a catalytic nanostructure using the assembly of G‐quadruplexes as bridging unit. 2) The K⁺‐induced stabilization of the anti‐thrombin G‐quadruplex nanostructure that inhibits the hydrolytic functions of thrombin. 3) The K⁺‐induced opening of DNA tweezers through the stabilization of G‐quadruplexes on the “tweezers’ arms" and the release of a strand bridging the tweezers into a closed structure. In all of the systems reversible, switchable, functions are demonstrated. For all systems two different signals are used to follow the switchable functions (fluorescence and the catalytic functions of the derived hemin–G‐quadruplex DNAzyme).     

A Highly K+‐Selective Two‐Photon Fluorescent Probe

A highly K⁺‐selective two‐photon fluorescent probe for the in vitro monitoring of physiological K⁺ levels in the range of 1–100 mM is reported. The two‐photon excited fluorescence (TPEF) probe shows a fluorescence enhancement (FE) by a factor of about three in the presence of 160 mM K⁺, independently of one‐photon (OP, 430 nm) or two‐photon (TP, 860 nm) excitation and comparable K⁺‐induced FEs in the presence of competitive Na⁺ ions. The estimated dissociation constant (K_d) values in Na⁺‐free solutions (K_d^OP=(28±5) mM and K_d^TP=(36±6) mM ) and in combined K⁺/Na⁺ solutions (K_d^OP=(38±8) mM and K_d^TP=(46±25) mM ) reflecting the high K⁺/Na⁺ selectivity of the fluorescent probe. The TP absorption cross‐section (σ_2PA) of the TPEF probe+160 mM K⁺ is 26 GM at 860 nm. Therefore, the TPEF probe is a suitable tool for the in vitro determination of K⁺.     

Molecular design of a “molecular syringe” mimic for metal cations using a 1,3‐alternate calix[4]arene cavity

The chemically switchable actions well imitate the function of a “molecular syringe,” has been studied in theory using the 1,3‐alternate calix [4]arene bearing a nitrogen‐containing crown cap at one side and a bis(ethoxyethoxy) group at another side by the π‐basic calixtube as a pipette and the crown ring as a rubber cap. The model is characterized by geometry optimization using density functional theory (DFT) at B3LYP/6‐31G level. The obtained optimized structures are used to perform natural bond orbital (NBO) and frequency analysis. The electron‐donating heteroatoms: O and N offer lone pair electrons to the contacting RY* (1‐center Rydberg) or LP* (1‐center valence antibond lone pair) orbitals of K⁺, Ag⁺. The results indicate that when the nitrogen atom in the crown ring is protonated, K⁺ and Ag⁺ will be pushed out to the bis(ethoxyethoxy) side through a π‐basic calixtube. When the nitrogen·H⁺ in the crown ring is deprotonated, K⁺ and Ag⁺ are sucked back to the crown‐capped side again. In the course of the coordination, both the intermolecular electrostatic interactions and the cation‐π interactions between the metal ion and π‐orbitals of the two pairs facing inverted benzene rings play a significant role. It is believed that this prototype of a “molecular syringe” is a novel molecular architecture for the action of metal cations. © 2010 Wiley Periodicals, Inc. J Comput Chem 2010     

Preparation and Application of Cholesteryl‐Benzo‐15‐Crown‐5/Cholesteryl Mixed Liquid Crystals

Various mixed liquid crystals containing crown ether‐cholesteryl liquid crystal, benzo‐15‐crown‐5‐COO‐C₂₇H₄₅ (B15C5‐COOCh), with various common cholesteric liquid crystals, e.g., cholesteryl chloride, cholesteryl benzoate and cholesteryl palmitate, were prepared and studied using polarizing microscopy and differential scanning calorimetry. Investigating the concentration effect of B15C5‐COOCh in mixed liquid crystals revealed that the addition of B15C5‐COOCh resulted in wider phase transition temperature ranges of these cholesteryl liquid crystals. The stability of these B15C5‐COOCh/cholesteryl mixed liquid crystals was studied using comprehensive graphic molecular modeling computer programs (Insight II and Discover) to calculate their molecular energy and stability energy. The effect of salts, e.g. Na⁺, Co³⁺, Y³⁺ and La³⁺, on the transition temperature range of the mixed liquid crystals was also investigated. The crown ether cholesteric liquid crystal B15C5‐COOCh was applied both as a surfactant and an ion transport carrier to transport metal ions through liquid membranes. Cholesteryl benzo‐15‐crown‐5 exhibited distinctive characteristics of a surfactant and the critical micellar concentration (CMC) of the surfactant was investigated by the pyrene fluorescence probe method. Cholesteryl benzo‐15‐crown‐5 was successfully applied as a good ion transport carrier (Ionophore) to transport various metal ions, e.g. Li⁺, Na⁺, La³⁺, Fe³⁺ and Co³⁺, through organic liquid membranes. The transport ability of the cholesteryl benzo‐15‐crown‐5 surfactant for these metal ions was in the order: Co³⁺ ≥ Li⁺ > Fe³⁺ > Na⁺ > La³⁺.     

A Highly K+‐Selective Fluorescent Probe – Tuning the K+‐Complex Stability and the K+/Na+ Selectivity by Varying the Lariat‐Alkoxy Unit of a Phenylaza[18]crown‐6 Ionophore

A desirable goal is to synthesize easily accessible and highly K⁺/Na⁺‐selective fluoroionophores to monitor physiological K⁺ levels in vitro and in vivo. Therefore, highly K⁺/Na⁺‐selective ionophores have to be developed. Herein, we obtained in a sequence of only four synthetic steps a set of K⁺‐responsive fluorescent probes 4 , 5 and 6 . In a systematic study, we investigated the influence of the alkoxy substitution in ortho position of the aniline moiety in π‐conjugated aniline‐1,2,3‐triazole‐coumarin‐fluoroionophores 4 , 5 and 6 [R=MeO ( 4 ), EtO ( 5 ) and iPrO ( 6 )] towards the K⁺‐complex stability and K⁺/Na⁺ selectivity. The highest K⁺‐complex stability showed fluoroionophore 4 with a dissociation constant K_d of 19 mm , but the K_d value increases to 31 mm in combined K⁺/Na⁺ solutions, indicating a poor K⁺/Na⁺ selectivity. By contrast, 6 showed even in the presence of competitive Na⁺ ions equal K_d values (K_d^K+=45 mm and K_d^K+/Na+=45 mm ) and equal K⁺‐induced fluorescence enhancement factors (FEFs=2.3). Thus, the fluorescent probe 6 showed an outstanding K⁺/Na⁺ selectivity and is a suitable fluorescent tool to measure physiological K⁺ levels in the range of 10–80 mm in vitro. Further, the isopropoxy‐substituted N‐phenylaza[18]crown‐6 ionophore in 6 is a highly K⁺‐selective building block with a feasible synthetic route.     

Aqueous Self‐Assembly and Cation Selectivity of Cobaltabisdicarbollide Dianionic Dumbbells

The anion [3,3′‐Co(C₂B₉H₁₁)₂]^? ([COSAN]^?) produces aggregates in water. These aggregates are interpreted to be the result of C?H???H?B interactions. It is possible to generate aggregates even after the incorporation of additional functional groups into the [COSAN]^? units. The approach is to join two [COSAN]^? anions by a linker that can adapt itself to act as a crown ether. The linker has been chosen to have six oxygen atoms, which is the ideal number for K⁺ selectivity in crown ethers. The linker binds the alkaline metal ions with different affinities; thus showing a distinct degree of selectivity. The highest affinity is shown towards K⁺ from a mixture containing Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺; this can be indicative of pseudo‐crown ether performance of the dumbbell. One interesting possibility is that the [COSAN]^? anions at the two ends of the linker can act as a hook‐and‐loop fastener to close the ring. This facet is intriguing and deserves further consideration for possible applications. The distinct affinity towards alkaline metal ions is corroborated by solubility studies and isothermal calorimetry thermograms. Furthermore, cryoTEM micrographs, along with light scattering results, reveal the existence of small self‐assemblies and compact nanostructures ranging from spheres to single‐/multi‐layer vesicles in aqueous solutions. The studies reported herein show that these dumbbells can have different appearances, either as molecules or aggregates, in water or lipophilic phases; this offers a distinct model as drug carriers.     

ACE applied to the quantitative characterization of benzo‐18‐crown‐6‐ether binding with alkali metal ions in a methanol–water solvent system

ACE was applied to the quantitative evaluation of noncovalent binding interactions between benzo‐18‐crown‐6‐ether (B18C6) and several alkali metal ions, Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺, in a mixed binary solvent system, methanol–water (50/50 v/v). The apparent binding (stability) constants (K_b) of B18C6–alkali metal ion complexes in the hydro‐organic medium above were determined from the dependence of the effective electrophoretic mobility of B18C6 on the concentration of alkali metal ions in the BGE using a nonlinear regression analysis. Before regression analysis, the mobilities measured by ACE at ambient temperature and variable ionic strength of the BGE were corrected by a new procedure to the reference temperature, 25°C, and the constant ionic strength, 10 mM . In the 50% v/v methanol–water solvent system, like in pure methanol, B18C6 formed the strongest complex with potassium ion (log K_b=2.89±0.17), the weakest complex with cesium ion (log K_b=2.04±0.20), and no complexation was observed between B18C6 and the lithium ion. In the mixed methanol–water solvent system, the binding constants of the complexes above were found to be about two orders lower than in methanol and about one order higher than in water.     

Density functional theory study of calix[4]arene‐N‐azacrown‐5, calix[4]arene‐N‐phenyl‐azacrown‐5, and their complexes with alkali‐metal cations: Na+, K+, and Rb+

Theoretical studies of 1,3‐alternate‐25,27‐bis(1‐methoxyethyl)calix[4]arene‐azacrown‐5 ( L₁ ), 1,3‐alternate‐25,27‐bis(1‐methoxyethyl)calix[4]arene‐N‐phenyl‐azacrown‐5 ( L₂ ), and the corresponding complexes M⁺/ L of L₁ and L₂ with the alkali‐metal cations: Na⁺, K⁺, and Rb⁺ have been performed using density functional theory (DFT) at B3LYP/6‐31G* level. The optimized geometric structures obtained from DFT calculations are used to perform natural bond orbital (NBO) analysis. The two main types of driving force metal–ligand and cation–π interactions are investigated. The results indicate that intermolecular electrostatic interactions are dominant and the electron‐donating oxygen offer lone pair electrons to the contacting RY* (1‐center Rydberg) or LP* (1‐center valence antibond lone pair) orbitals of M⁺ (Na⁺, K⁺, and Rb⁺). What's more, the cation–π interactions between the metal ion and π‐orbitals of the two rotated benzene rings play a minor role. For all the structures, the most pronounced changes in geometric parameters upon interaction are observed in the calix[4]arene molecule. In addition, an extra pendant phenyl group attached to nitrogen can promote metal complexation by 3D encapsulation greatly. In addition, the enthalpies of complexation reaction and hydrated cation exchange reaction had been studied by the calculated thermodynamic data. The calculated results of hydrated cation exchange reaction are in a good agreement with the experimental data for the complexes. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010