Interfacial tension and acid‐base approaches to polymer interactions

A significant correlation has been shown to exist between the interfacial tension of polymer pairs and their acid‐base pair interaction. The relationship is inverse, with interfacial tensions decreasing as acid‐base interactions increase. Interfacial tensions, frequently used as an indicator of polymer compatibility, were measured by the breaking thread method at temperatures in the vicinity of 200 °C. Acid‐base pair interaction values were measured by inverse gas chromatography over wide temperature ranges. The observed correlation confirms the important contribution made by short‐range, acid‐base interactions to the observed value of interfacial tension and supports the prediction of equations based on fundamental definitions of surface forces. A collateral finding of this work is the decrease of acid‐base functionality with rising temperature for all polymers studied. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2096–2104, 2000     

Phenacyl esters of acetic acid derivatives and their application for the synthesis of 2‐oxo‐4‐phenyl‐5‐(phenylhydrazono)‐2,5‐dihydro‐furan‐3‐derivatives

Coupling of various substituted phenacyl acetates 1 and diazonium salts 3 was studied. If the phenacyl acetates were substituted by an electronaceptor group such as CN or COOEt 3‐substituted phenyl‐5‐(phenyl‐hydrazono)‐5H‐furan‐2‐ones 4 were formed. Also synthesis of aza and diaza analogs is described. The compounds were characterized using MS and NMR spectroscopy.     

Microwave‐assisted synthesis of 1,3′‐diaza‐flavanone/flavone and their alkyl derivatives with antimicrobial activity

A simple environmentally friendly solid‐phase microwave‐assisted method was used to synthesis of the 1,3′‐diazaflavanone ( 2 ) and 1,3′‐diazaflavone ( 3 ) from the cyclization of 2′‐amino (E)‐3″‐azachalcone ( 1 ). Ten new N‐alkyl (C_5–12,14,15)‐substituted 1,3′‐diazaflavanonium bromides ( 2a–j ) were prepared from compound 2 with corresponding alkyl halides in acetonitrile under reflux. In addition, nine new N,N′‐dialkyl (C_5–12,14)‐substituted 1,3′‐diazaflavonium bromides ( 3a–i ) were also synthesized from compound 3 with corresponding alkyl halides using basic silica in acetonitrile. The antimicrobial activities of compounds 1–3 , 2a–j , and 3a–i were tested against Gram‐positive (G+) (Bacillus subtilis, Staphylococcus epidermidis, Staphylococcus aureus, and Enterococcus faecalis) and Gram‐negative (G?) (Escherichia coli, Klebsiella pneumonia, Pseudomonas aeruginosa, Proteus vulgaris, Salmonella typhimirium, Yersinia pseudotuberculosis, and Enterobacter cloaceae) microorganisms. They showed good antimicrobial activity against the Gram‐positive bacteria tested with the minimal inhibitory concentration values less than 7.8 μg/mL in most cases. The optimum length of the alkyl chain for better and broader activity is situated in the range of 9–12 carbon atoms in the series of compounds 2a–j and five to six carbon atoms in the series of compounds 3a–i . The nonalkylated compounds 1–3 were not effective, as were the ones alkylated with five or six C alkyl groups ( 2a and 2b ) and 8–13 C alkyl groups for N,N′‐dialkyl compounds ( 3c–3i ). The antimicrobial activity increased as the length of the alkyl substitution increased from 8 to 12 carbons in compounds 2a–j . However, antimicrobial activity decreased as the length of the alkyl substitution increased from 7 to 13 carbons in compounds 3c–i . J. Heterocyclic Chem., (2012)     

Phenylphosphinic acid‐catalyzed synthesis of 6‐unsubstituted dihydropyrimidinones under solvent‐free conditions

Phenylphosphinic acid is found to catalyze the three‐component condensation of an aldehyde, enaminone, and urea or thiourea to afford the corresponding 6‐unsubstituted dihydropyrimidinones in high to excellent yields. This methodology is simple and fast synthetic route for the preparation of interesting class of heterocycles.     

Phosphosulfonic acid‐catalyzed green synthesis and bioassay of α‐aryl‐α′‐1,3,4‐thiadiazolyl aminophosphonates

A series of new α‐aminophosphonates containing 1,3,4‐thiadiazole moiety (4a–l) were synthesized via a simple, efficient, and one‐pot three‐component Kabachnik–Fields reaction of 2‐amino‐5‐ethyl‐1,3,4‐thiadiazole with various aryl/heteroaryl aldehydes and diethylphosphite under solvent‐free microwave irradiation conditions using phosphosulfonic acid, as a reusable and heterogeneous solid acid catalyst. All the title compounds were screened for radical scavenging activity by DPPH and H₂O₂ methods, and antimicrobial activity against bacteria (Gram‐positive and Gram‐negative) and fungi using the disc diffusion technique. They exhibited potent in vitro antioxidant and moderate antimicrobial activity.     

Uses of 2‐diazo‐4,5,6,7‐tetrahydrobenzo[b]thiophene derivatives in the synthesis of azoles,azines, and their fused derivatives

The reactions of 2‐diazo‐4,5,6,7‐tetrahydrobenzo[b]thiophene derivatives with dimeric adducts 2a and 2b gave the hydrazone derivatives 3a and 3b , respectively. The reactivity of the latter products towards various chemical reagents was studied in order to provide azole and azine derivatives incorporating the thiophene ring, and most of them showed high antimicrobial activity. © 2002 Wiley Periodicals, Inc. Heteroatom Chem 13:108–115, 2002; Published online in Wiley Interscience (www.interscience.wiley.com). DOI 10.1002/hc.10003     

Phosphinated phenols from acid‐fragmentation of bisphenols and their unsymmetrical diamine derivatives for copolyimides

Four novel diamines (9–12) were prepared by a two‐step procedure from phosphinated phenols (1–4) that were prepared from acid‐fragmentation of four bisphenols, including bisphenol A, 4,4′‐isopropylidenebis(2,6‐dimethylphenol), cis(4‐hydroxyphenyl)cyclohexane, and 9,9′‐bis(4‐hydroxyphenyl)fluorene, followed by nucleophilic addition of 9,10‐dihydro‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO). Copolyimides based on (9–12) /4,4′‐diaminodiphenyl ether (ODA)/dianhydride were prepared. The structure‐property relationship on the copolyimides was discussed. Due to the structural similarity, (9) /ODA‐based copolyimides were compared with (10) /ODA‐based copolyimides, while (11) /ODA‐based copolyimides were compared with (12) /ODA‐based copolyimides. The dimethyl substitutents cause (10) /ODA‐based copolyimides to display higher T_g, modulus, dimensional stability, contact angle, and better solubility than (9) /ODA‐based copolyimides. (12) /ODA‐based copolyimides that exhibit fluorene moieties display higher T_g and thermal stability, but a lower contact angle and poorer solubility than (11) /ODA‐based copolyimides that exhibit cyclohexane moieties. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 390–400     

The synthesis of 1‐[(substituted)pyrazol‐5‐yl]‐iminomethyl‐2‐nitroiminoimidazolidine and its derivatives

In this article 1‐[(substituted)pyrazol‐5‐yl]iminomethyl‐2‐nitroimino imidazolidines ( II ) and their derivatives were synthesized. All the compounds were verified by elemental analysis, ¹H NMR and IR. In the reaction of II with halides, two different results were observed.     

A novel synthesis of some 2‐imino‐4‐thiazolidinone derivatives

An efficient and simple route is presented to the synthesis of some iminothiazolidinone derivatives. α‐Chloro amide derivatives undergo coupling reaction with isothiocyanate in the presence of a mild base, followed by nucleophilic substitution of chlorine by the sulfur atom of isothiocyanate.     

Green synthesis of new pyrimido[4,5‐d]pyrimidine derivatives using 7‐aminonaphthalene‐1,3‐disulfonic acid‐functionalized magnetic Fe3O4@SiO2 nanoparticles as catalyst

We, herein, describe a novel, simple, efficient and one‐pot multi‐component procedure for the synthesis of substituted pyrimido[4,5‐d]pyrimidines via reaction of N,N‐dimethyl‐6‐amino uracil, isothiocyanate and aromatic aldehydes promoted by 7‐aminonaphthalene‐1,3‐disulfonic acid (ANDSA)‐functionalized magnetic Fe₃O₄@SiO₂ in water as solvent and without using any other harmful organic reagents. Compared with other reactions, using these organic–inorganic hybrid heterogeneous catalysts can help us to achieve a green procedure, high catalytic activity, easy recovery with an external magnetic field, and short reaction times.     

A general synthesis of 8‐hydroxy‐6‐substituted‐1,7‐naphthyridines

A general method for the synthesis of 8‐hydroxy‐6‐substituted‐1,7‐naphthyridines is described using acylation of the dianion derived from tert‐butylamide 1 , followed by cyclization of the resulting intermediate ketones 2 with ammonium acetate.     

Microwave‐assisted synthesis of some 1,2,4‐triazol‐5‐one derivatives

A series of 3‐alkyl(aryl)‐4‐(p‐hydroxy‐phenyl)‐4,5‐dihydro‐1H‐1,2,4‐triazol‐5‐ones 2 were obtained from the reaction of alkyl (aryl) ester ethoxycarbonyl hydrazones 1 with p‐hydroxy aniline. The reaction of 1 with 1,4‐diamino benzene (1:1) to afford 3‐alkyl(aryl)‐4‐(p‐aminophenyl)‐4,5‐dihydro‐1H‐1,2,4‐triazol‐5‐ones 3 . The reaction of 3 with benzaldehyde gave 3‐alkyl(aryl)‐4‐(4′‐benzilidenamino)‐4,5‐dihydro‐1H‐1,2,4‐triazol‐5‐ones 4 . All of the above reactions occurred under microwave heating and conventional methods. Their structures were confirmed by ¹H NMR, ¹³C NMR, IR, and elemental analyses. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:38–42, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20381     

Novel synthesis of 2H‐3,1‐benzoxazine derivatives

On heating of the 2‐amino‐5‐nitrobenzonitrile 1 with cyclohexanone 2a in the presence of catalyst, the novel compound 6‐nitrospiro[3,1‐benzoxazine‐2,1′‐cyclohexan]‐4(1H)‐imine 5a was formed. Also, reaction of 1 with cyclopentanone 2b or cycloheptanone 2c afforded 5b or 5c respectively. All new compounds were identified by ¹H NMR, ¹³C NMR, IR, MS spectra and elemental analysis. The crystal structure of product 5a was determined by crystal X‐ray diffraction. And the mechanism for these reactions is proposed.     

Microwave‐assisted synthesis of some 2,4‐thiazolidinedione derivatives

The condensation of 5‐[4′‐(2″‐halo‐ethoxy)benzylidenyl]‐2,4‐thiazolidinediones 2 when separately carried with different 2‐amino thiazoles 3 and different sulphanilamides 4 in DMF, using potassium hydroxide in the presence of a catalytic amount of a phase transfer catalyst, gave new 5‐[4′‐(4″‐aryl‐thiazol‐2″‐yl‐aminoethoxy)‐3′/5′‐substituted benzylidenyl]‐2,4‐thiazolidinediones 5 and 5‐[4′‐(2″/4″‐sulphonamidophenyl aminoethoxy)‐3′/5′‐substituted benzylidenyl]‐2,4‐thiazolidinediones 6 derivatives in good yields, respectively. The structures of all new compounds were established from analytical and spectral data. All the reaction sequences were carried under microwave irradiation, as an efficient tool. © 2009 Wiley Periodicals, Inc. Heteroatom Chem 20:151–156, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20528     

A convenient synthesis of pyrrolo‐annelated 1,3‐diselenole‐2‐thione and 1,3‐diselenol‐2‐one derivatives via dipyrrolo‐annelated 1,2,5,6‐tetraselenocine derivatives

The reaction of 2,5‐dimethyl‐3,4‐diselenocyanato‐1H‐pyrrole by NaBH₄ or NaOCH₃ led to tetraselenide 7 in quantitative yield. Treatment of protected tetraselenide 8 with LiAlH₄ afforded the aluminum complex intermediate that was converted into pyrrole‐annelated 1,3‐diselenolo‐2‐thione 9 in excellent yield. Similarly, treatment of tetraselenide 8 with LiAlH₄ followed by TFA afforded 1,2‐diselenol intermediate that was converted into pyrrole‐annelated 1,3‐diselenolo‐2‐one 10 upon treatment of diimidazole carbonate. J. Heterocyclic Chem., (2011).     

A simple one‐pot synthesis of 1,2,3,4‐tetrahydro‐2‐thioxopyrimidine derivatives

5‐Benzoyl‐4‐(substituted phenyl)‐6‐phenyl‐1,2,3,4‐tetrahydro‐2‐thioxopyrimidines ( 4a‐d ) were synthesized using the Biginelli three component cyclocondensation reaction of an appropriate β‐diketone, arylaldehyde, and thiourea in acetic acid under reflux condition in approximately 52‐65% yields. The acetylation of compounds 4a‐d gave 3‐acetyl thioxopyrimidine derivatives 5a‐d . Also, pyrimidothiazine compounds 6a‐d were prepared by a simple one‐pot condensation reaction of starting pyrimidine derivatives 4a‐d and 3‐bromopropionic acid. The structures of compounds were characterized on the basis of elemental analyses, IR, ¹H and ¹³C‐NMR spectra.