Facile synthesis of highly conductive polyaniline/graphite nanocomposites

A facile process for the synthesis of exfoliated graphite and polyaniline/graphite (PANI/graphite) nanocomposite was developed. Graphite nanosheets were prepared via the microwave irradiation and sonication from synthesized expandable graphite. The nanocomposites were fabricated via in situ polymerization of aniline monomer in the presence of graphite nanosheets. The nanoscale dispersion of graphite sheets was evidenced by the SEM and TEM examinations. According to the electrical conductivity test, the conductivity of the final PANI/graphite nanocomposites were dramatically increased compared with pristine PANI. From the thermogravimetric analysis, the introduction of graphite exhibits a beneficial effect on the thermal stability of PANI.     

The preparation and characterization of novel cocylic(arylene disulfide) oligomers

A series of homo‐ and cocyclic(arylene disulfide) oligomers were synthesized under high dilution conditions by the catalytic oxidation of arylenedithiols with oxygen in the presence of a copper‐amine catalyst in DMAc. The aryl groups contained moieties such as sulfone, ether, and ketone. The free radical ring‐opening polymerization of these cyclic(arylene disulfide) oligomers led to the formation of linear poly(thio arylene)s. The homo‐ and cocyclic(arylene disulfide) oligomers were characterized by gradient high pressure liquid chromatography (HPLC), get permeation chromatography (GPC), ¹H‐NMR, and differential scanning calorimetry (DSC) methods. These cocyclic(arylene disulfide) oligomers except those containing sulfone moiety had lower melt flow temperature as low as 140 °C and therefore could readily undergo free radical ring‐opening polymerization under mild conditions. The glass transition temperatures of these cocyclics ranged from 72.3 to 190.0 °C, while the glass transition temperatures of the polydisulfides derived from these cocyclics ranged from 78.4 to 194.5 °C. In this article, a new method of preparing arylene dithiols 4,4′‐oxybis(benzenethiol) and diphenylmethane‐4,4′‐dithiol is reported. Copyright © 2003 John Wiley & Sons, Ltd.     

Electrical conductivity of poly(ethylene terephthalate)/expanded graphite nanocomposites prepared by in situ polymerization

Nanocomposites based on poly(ethylene terephthalate) (PET) and expanded graphite (EG) have been prepared by in situ polymerization. Morphology of the nanocomposites has been examined by electronic microscopy. The relationship between the preparation method, morphology, and electrical conductivity was studied. Electronic microscopy images reveal that the nanocomposites exhibit well dispersed graphene platelets. The incorporation of EG to the PET results in a sharp insulator‐to‐conductor transition with a percolation threshold (?_c) as low as 0.05 wt %. An electrical conductivity of 10^?3 S/cm was achieved for 0.4 wt % of EG. The low percolation threshold and relatively high electrical conductivity are attributed to the high aspect ratio, large surface area, and uniform dispersion of the EG sheets in PET matrix. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Synthesis and ring‐opening polymerization of co‐cyclic(aromatic aliphatic disulfide) oligomers

An effective approach was presented for the synthesis of co‐cyclic(aromatic aliphatic disulfide) oligomers by catalytic oxidation of aromatic and aliphatic dithiols with oxygen in the presence of a copper‐amine catalyst. The aromatic dithiols can be 4,4′‐oxybis(benzenethiol), 4,4′‐diphenyl dithiol, 4,4′‐diphenylsulfone dithiol. The aliphatic dithiols can be 1,2‐ethanedithiol, 2,3‐butanedithiol, 1,6‐hexane dithiol. The co‐cyclic(aromatic aliphatic disulfide) oligomers were characterized by gradient HPLC, MALDI‐TOF‐MS, GPC, ¹H‐NMR, TGA, and DSC techniques. The glass transition temperatures of these co‐cyclics ranged from ?11.3 to 56.6°C. In general, these co‐cyclic(aromatic aliphatic disulfide) oligomers are soluble in common organic solvents, such as CHCl₃, THF, DMF, DMAc. These co‐cyclic oligomers readily underwent free radical ring‐opening polymerization in the melt at 180°C, producing linear, tough and high molecular weight poly(aromatic aliphatic disulfide)s. The glass transition temperatures of these polymers ranged from ?3.7 to 107.8°C that are higher than those of corresponding co‐cyclics. Copyright © 2003 John Wiley & Sons, Ltd.     

Thermal conductivity of exfoliated graphite nanocomposites

Since the late 1990’s, research has been reported where intercalated, expanded, and/or exfoliated graphite nanoflakes could also be used as reinforcements in polymer systems. The key point to utilizing graphite as a platelet nanoreinforcement is in the ability to exfoliate graphite using Graphite Intercalated Compounds (GICs). Natural graphite is still abundant and its cost is quite low compared to the other nano–size carbon materials, the cost of producing graphite nanoplatelets is expected to be ~$5/lb. This is significantly less expensive than single wall nanotubes (SWNT) (>$45000/lb) or vapor grown carbon fiber (VGCF) ($40–50/lb), yet the mechanical, electrical, and thermal properties of crystalline graphite flakes are comparable to those of SWNT and VGCF. The use of exfoliated graphite flakes (xGnP) opens up many new applications where electromagnetic shielding, high thermal conductivity, gas barrier resistance or low flammability are required. A special thermal treatment was developed to exfoliate graphite flakes for the production of nylon and high density polypropylene nanocomposites. X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to assess the degree of exfoliation of the graphite platelets and the morphology of the nanocomposites. The thermal conductivity of these composites was investigated by three different methods, namely, by DSC, modified hot wire, and halogen flash lamp methods. The addition of small amounts of exfoliated graphite flakes showed a marked improvement in thermal and electrical conductivity of the composites.     

Synthesis and characterization of polyaniline/graphite conducting nanocomposites

A new method for the synthesis of exfoliated graphite and polyaniline (PANI)/graphite nanocomposites was developed. Exfoliated graphite nanosheets were prepared through the microwave irradiation and sonication of synthesized expandable graphite. The nanocomposites were fabricated via the in situ polymerization of the monomer at the presence of graphite nanosheets. The as-synthesized graphite nanosheets and PANI/graphite nanocomposite materials were characterized with Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis (TGA). The conductivity of the PANI/graphite nanocomposites was dramatically increased over that of pure PANI. TGA indicated that the incorporation of graphite greatly improved the thermal stability of PANI. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1972–1978, 2004     

Short carbon fiber reinforced aromatic polydisulfide derived from cyclic (4,4′‐oxybis(benzene)disulfide) via ring‐opening polymerization

Morphology, mechanical and thermal properties of short carbon fiber reinforced poly(arylene disulfide) synthesized by ring‐opening reaction of cyclic(arylene disulfide) oligomers were studied. These macrocyclic oligomers were prepared from 4,4′‐oxybis(benzenethiol) by oxidation coupling cyclization. Ring‐opening polymerization (ROP) was carried out by in situ melt molding in air. Oxidation reaction during the ROP was detected using the Raman spectrum technique. Three‐point bending tests were performed to determine the flexural properties of neat polymers and the composites. The results showed that the flexural strength and modulus of poly(arylene disulfide)/carbon fiber composites were greatly enhanced with the carbon fiber addition. The maximum weight loss peak temperatures of the composites increased with increasing short carbon fiber content. Good adhesion between carbon fiber and the matrix was observed using scanning electron microscopy (SEM) technique. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis of colloidal superparamagnetic nanocomposites by grafting poly(ϵ‐caprolactone) from the surface of organosilane‐modified maghemite nanoparticles

Superparamagnetic and biodegradable/biocompatible core–corona nanocomposite particles were prepared by ring‐opening polymerization of ?‐caprolactone initiated from the surface of maghemite. As was done in a previous work, an aminosilane coupling agent was chosen as the coinitiator and immobilized at the surface of the maghemite particles to allow the growth of the poly(?‐caprolactone) (PCL) chains from the solid surface. Two different catalytic systems based on aluminum and tin alkoxides were investigated. Whatever the catalyst used, diffuse reflectance Fourier transform spectroscopy brought evidence for polymer anchoring through a covalent bond, whereas thermogravimetric analysis attested to the presence of high amounts of PCL around the maghemite. Magnetization measurements proved that the nanocomposites kept their superparamagnetic properties after coating. The polymer contents obtained by this grafting‐from route were compared with the results obtained by a more classical grafting‐to process. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3221–3231, 2005     

Thermal performance of poly(ethylene disulfide)/expanded graphite nanocomposites

In this study, the influences of expanded graphite oxide (EG) nanosheets presence with and without surfactant on structural and thermal performance of poly(ethylene disulfide) (PEDS)-based nanocomposites are investigated. Sodium dodecylbenzenesulfonate (SDBS) is used as a surfactant for the preparation of modified-EG nanosheets. The structural, morphological, and thermal properties of prepared nanocomposites are studied using X-ray diffraction (XRD), scanning electron microscopy, and differential scanning calorimetry techniques, respectively. XRD patterns of nanocomposites reveal that a high degree of expanded graphite nanosheets dispersion is achieved with and without surface modification using in situ polymerization method. Moreover, the presence of immobilized polysulfide chains near the interface region of nanosheets is suggested as a possible reason for the observed increase in the number of semi-crystalline organic fractions in the structure of PEDS via EG nanosheets incorporation. In addition, the morphology of SDBS-modified-EG loaded nanocomposite shows a smoother fracture surface than unmodified-nanosheets reinforced nanocomposite. Therefore, more interactions between nanosheets and polysulfide chains are expected in the structure of unmodified-EG reinforced nanocomposite. Moreover, thermal resistance and degradation kinetics of prepared nanocomposites are studied using thermogravimetric analysis results and degradation activation energy calculations, respectively. The required activation energy for the degradation process of SDBS-EG loaded nanocomposite is about 140 kJ mol^?1 lower than the required degradation activation energy of unmodified-nanosheets reinforced nanocomposite.     

Improved polyvinylpyrrolidone (PVP)/graphite nanocomposites by solution compounding and spray drying

In order to evaluate the roles of graphite dispersion on the functional properties of the composites, PVP/graphite nanocomposites were prepared by blending the aqueous suspension of expanded graphite sheets and polyvinylpyrrolidone (PVP) aqueous solution by ultrasonic treatment, followed by spray drying and direct drying as a comparison individually. The effects of graphite loading and drying method on the dispersion of graphite and the resultant properties of the composites such as electrical and thermal conductivity, friction, and dynamic mechanical properties were studied. The results from transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X‐ray diffraction showed that the composites prepared by fast spray drying exhibited a higher degree of exfoliation and a better dispersion of graphite sheets in the PVP matrix than the corresponding composites prepared by direct drying, leading to a conclusion that fast spray drying can effectively prevent from re‐stacking of the exfoliated graphite sheets as illustrated. As a result, dynamic mechanical thermal analysis showed significant increases in the storage modulus and glass transition temperature for the composites prepared by spray drying. Besides, the spray drying as well greatly improved the electrical and thermal conductivity of the composites. It was also found that the electrical and thermal conductivity of the composites strongly depended on the graphite dispersion, while the friction coefficient unexpectedly does not. Increasing graphite loading level might enhance the probability of graphite sheets re‐stacking, resulting in poor graphite dispersion. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis,characterization, and thermal stability of poly (lactic acid)/zinc oxide pillared organic saponite nanocomposites via ring‐opening polymerization of d,l‐lactide

Poly (lactic acid) (PLA) was synthesized using d , l ‐lactide monomer and zinc oxide (ZnO) pillared organic saponite as the green catalyst, through ring‐opening polymerization. The effects of stoichiometry of catalyst and polymerization conditions on molecular weight of PLA were evaluated by orthogonal experiment. The optimum polymerization parameters were: 0.5 wt% ZnO pillared organic saponite and reaction conditions of 170°C for 20 hr. Fourier transform infrared spectroscopy and ¹H nuclear magnetic resonance spectroscopy confirmed the PLA structure. Gel permeation chromatography showed that the average molecular weight of PLA was 48,442 g/mol, and its polydispersity index was 1.875. Differential scanning calorimetry, X‐ray diffraction, and polarized optical microscopy showed that ZnO pillared organic saponite improved the crystallinity of PLA. Thermal gravimetric analysis showed improved thermal stability of PLA because of ZnO pillared organic saponite. Thermal decomposition kinetics of PLA/ZnO pillared organic saponite nanocomposites was also studied. The activation energies (E_a) for thermal degradation of PLA and PLA/ZnO pillared organic saponite nanocomposites were evaluated by the Kissinger and Ozawa methods, which demonstrated that ZnO pillared organic saponite enhanced E_a of thermal degradation of PLA and significantly improved its thermal stability. Copyright © 2015 John Wiley & Sons, Ltd.     

Cationic poly(ester‐phosphoester)s: Facile synthesis and antibacterial properties

Biodegradable poly(ester‐phosphoester)s bearing multiple chloroethyl groups were synthesized facilely by the ring‐opening copolymerization of 2‐(2‐chloroethoxy)‐2‐oxo‐1,3,2‐dioxaphospholane (CEP) and ε‐caprolactone (CL) in the presence of lanthanum tris(2,6‐di‐tert‐butyl‐4‐methylphenolate)s (La(DBMP)₃) as single‐component catalyst under mild conditions. Then the quaternization reaction was carried out between the halide copolymers and a series of N,N‐dimethyl alkylamines to give poly(ester‐phosphoester)s containing ammonium groups with various charge density and alkyl chain length. The antibacterial properties of these cationic poly(esterphosphoester)s were evaluated by OD600 and zone of inhibition methods against gram‐negative (Escherichia coli) and gram‐positive (Staphylococcus aureus) bacteria. Cationic poly(esterphosphoester)s with long alkyl chain on the ammonium groups show excellent antibacterial activity for both gram‐negative and gram‐positive bacteria even with low charge density. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3667–3673     

Precise synthesis of poly(macromonomer)s containing sugars by repetitive ROMP and their attachments to poly(ethylene glycol): synthesis, TEM analysis and their properties as amphiphilic block fragments

Various poly(macromonomer)s (PMMs) have been prepared by a repeating ring opening metathesis polymerization (ROMP) technique using the well-defined molybdenum initiators of the type, [Mo(CHCMe(2)Ph)(NAr)(OR)(2)] with OR=OCMe(3), OCMeC(CF(3))(2); Ar=2,6-iPr(2)C(6)H(3), 2,6-Me(2)C(6)H(3). The synthetic strategy is based on the polymerization of norbornene and its derivatives affording di- and triblock side chains bearing sugars (mannose, galactose, glucose etc.), linked via O- (ester), and glycosidase resistant C- (isoxazoline) glycosides. The efficient placement of norbornene units on the side chain termini and their conversion into PMMs, facilitated by the Mo alkylidenes, proceeded in a living manner with the quantitative initiation. The methodology was applied to prepare poly(macromonomer)-graft-PEG [PEG: poly(ethylene glycol)], by the attachment of a pseudo phenol terminus on the PMM main chain to PEG-Ms(2) [MsO(CH(2)CH(2)O)(n)Ms, Ms=MeSO(2)] using a "grafting to" approach. Removal of the acetal protecting groups from the sugar coating of a variety of supramolecular structures including PMMs, linear amphiphilic block copolymers (ABC) and a PMM-graft-PEGby using trifluroacetic acid/water (9:1), and suspension in water, prompted the spontaneous formation of spherical architectures by self-assembly of the amphiphilic PMMs as observed by transmission electron microscopy (TEM). The ability to uptake the hydrophobic dye (Nile Red) into the micellar cores of a variety of amphiphilic polymeric fragments is a significant step towards the production of sugar-coated nanospheres for cell-targeting biomimetic applications.     

Poly(styrene‐b‐tetrahydrofuran)/clay nanocomposites by mechanistic transformation

Synthesis of poly(styrene‐block‐tetrahydrofuran) (PSt‐b‐PTHF) block copolymer on the surfaces of intercalated and exfoliated silicate (clay) layers by mechanistic transformation was described. First, the polystyrene/montmorillonite (PSt/MMT) nanocomposite was synthesized by in situ atom transfer radical polymerization (ATRP) from initiator moieties immobilized within the silicate galleries of the clay particles. Transmission electron microscopy (TEM) analysis showed the existence of both intercalated and exfoliated structures in the nanocomposite. Then, the PSt‐b‐PTHF/MMT nanocomposite was prepared by mechanistic transformation from ATRP to cationic ring opening polymerization (CROP). The TGA thermogram of the PSt‐b‐PTHF/MMT nanocomposite has two decomposition stages corresponding to PTHF and PSt segments. All nanocomposites exhibit enhanced thermal stabilities compared with the virgin polymer segments. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2190–2197, 2009     

Methods of preparation of novel composites of poly(ϵ‐caprolactone) and a modified Mg/Al hydrotalcite

12‐Hydroxydodecanoate (HD) anions were intercalated, via an ion‐exchange procedure, onto a Mg/Al hydrotalcite‐like compound with the formula [Mg_0.65Al_0.35(OH)₂](NO₃)_0.35·0.56H₂O. The obtained intercalate, characterized by chemical and thermal analyses, X‐ray powder diffraction, and Fourier transform infrared spectroscopy, had the formula [Mg_0.65Al_0.35(OH)₂](NO₃)_0.08(HD)_0.28·0.56H₂O and an interlayer distance of 2.27 nm. Structural considerations indicated that the charge‐balancing HO? (CH₂)₁₁? COO^? anions were accommodated in the interlayer region as a monofilm of partially interdigitated alkyl chains in a trans planar conformation and bearing the alcoholic group. The organically modified hydrotalcite was used to prepare novel composites based on poly(?‐caprolactone) (PCL) with different procedures: (1) solvent casting, (2) ring‐opening polymerization of ?‐caprolactone, and (3) blending of precursors consisting of a PCL intercalated oligomer with a high‐molecular‐weight PCL. Microcomposites were obtained by the solvent casting of a mixture of a high‐molecular‐weight PCL and the modified hydrotalcite. The ring‐opening polymerization of ?‐caprolactone initiated by the ? OH groups of the alkyl chains intercalated in the hydrotalcite led to hybrid materials in which a low‐molecular‐weight PCL was in part intercalated into the modified hydrotalcite. Nanocomposites containing exfoliated hydrotalcite were obtained through the mixing, in different weight ratios, of hybrids consisting of PCL oligomers and modified hydrotalcite with a commercial high‐molecular‐weight PCL. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2281–2290, 2005     

Polylactide/exfoliated graphite nanocomposites with enhanced thermal stability,mechanical modulus,and electrical conductivity

We have prepared a series of polylactide/exfoliated graphite (PLA/EG) nanocomposites by melt‐compounding and investigated their morphology, structures, thermal stability, mechanical, and electrical properties. For PLA/EG nanocomposites, EG was prepared by the acid treatment and following rapid thermal expansion of micron‐sized crystalline natural graphite (NG), and it was characterized to be composed of disordered graphite nanoplatelets. It was revealed that graphite nanoplatelets of PLA/EG nanocomposites were dispersed homogeneously in the PLA matrix without forming the crystalline aggregates, unlike PLA/NG composites. Thermal degradation temperatures of PLA/EG nanocomposites increased substantially with the increment of EG content up to ～3 wt %, whereas those of PLA/NG composites remained constant regardless of the NG content. For instance, thermal degradation temperature of PLA/EG nanocomposite with only 0.5 wt % EG was improved by ～10 K over PLA homopolymer. Young's moduli of PLA/EG nanocomposites increased noticeably with the increment of EG content up to ～3 wt %, compared with PLA/NG composites. The percolation threshold for electrical conduction of PLA/EG nanocomposites was found to be at 3–5 wt % EG, which is far lower graphite content than that (10–15 wt % NG) of PLA/NG composites. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 850–858, 2010     

Synthesis and characterization of poly(ethylene oxide)/polylactide/polylysine tri‐arm star copolymers for gene delivery

Amphiphilic cationic poly(ethylene oxide)‐S(polylysine)‐poly(d ,l ‐lactide) (mPEO‐S(CK_n)‐PLA) tri‐arm star copolymers were synthesized by a combination of ring opening polymerization (ROP) and a thiol–disulfide exchange. The mPEO‐S(CK_n)‐PLA copolymers were found to be non‐cytotoxic and could effectively condense GFP plasmid DNA into nanometer‐sized complexes, as characterized by dynamic light scattering (DLS), suitable for endocytotic cellular uptake. In vitro DNA transfection studies showed that the amphiphilic structure is capable of DNA transfection and GFP expression. Addition of chloroquine into the medium further enhanced the DNA transfection efficiency. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 635–644     

Characterization of PBT/POSS nanocomposites prepared by in situ polymerization of cyclic poly(butylene terephthalate) initiated by functionalized POSS

Novel poly(butylene terephthalate) (PBT)/polyhedral oligomeric silsesquioxane (POSS) nanocomposites were synthesized by ring‐opening polymerization of cyclic poly(butylene terephthalate) initiated by functionalized POSS with various feed ratios. The impact of POSS incorporation on melting and crystallization behaviors of PBT/POSS nanocomposites was investigated by means of X‐ray diffraction and differential scanning calorimetry. It was found that the novel organic–inorganic association result in the significant alterations in the melting and crystallization behavior of PBT. Thermal studies confirmed that the incorporation of POSS can enhance the thermal stability of the polymers, and the copolymer glass transition temperature increased with the increasing of POSS macromonomer content. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1853–1859, 2010     

Novel biodegradable copolyesters containing blocks of poly(3-hydroxyoctanoate) and poly(epsilon-caprolactone): synthesis and characterization

Novel biodegradable polyester block copolymers have been synthesized by using well-defined poly(3-hydroxyoctanoate) (PHO) oligomers having a hydroxyl end group and an ester end group with M(n) values of 800, 2,500, 5,300, 8,000, or 20,000 as an elastomeric soft segment and poly(epsilon-caprolactone) as a more crystalline segment. These PHO oligomers prepared by methanolysis were subjected to block copolymerization with epsilon-caprolactone. The chemical structure of the copolymers was confirmed by (1)H NMR and (13)C NMR spectroscopy. All the copolyesters are semi-crystalline and two T(g) were observed by differential scanning calorimetry when the molecular weight of the PHO block is about 20,000.     

Polymorphism behavior of poly(ethylene naphthalate)/clay nanocomposites

Thermally stable organically modified clays based on 1,3‐didecyl‐2‐methylimidazolium (IM2C10) and 1‐hexadecyl‐2,3‐dimethyl‐imidazolium (IMC16) were used to prepare poly(ethylene naphthalate) (PEN)/clay nanocomposites via a melt intercalation process. The clay dispersion in the resulting hybrids was studied by a combination of X‐ray diffraction, polarizing optical microscopy, and transmission electron microscopy. It was found that IMC16 provided better compatibility between the PEN matrix and the clay than IM2C10, as evidenced by some intercalation of polymer achieved in the PEN/IMC16‐MMT hybrid. The effects of clay on the crystal structure of PEN were investigated. It was found that both pristine MMT and imidazolium‐treated MMT enhanced the formation of the β‐crystal phase under melt crystallization at 200 °C. At 180 °C, however, the imidazolium‐treated MMT was found to favor the α‐crystal form instead. The difference in clay‐induced polymorphism behavior was attributed to conformational changes experienced by the clay modifiers as the crystallization temperature changes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1040–1049, 2006