The research on physiological property of functionalized hyaluronan: interaction between sulfated hyaluronan and plasma proteins

Hyaluronan (HA) is a natural polysaccharides which has no sulfated group but high molecular weight in comparison with other glycosaminoglycans (GAGs). Previously it has been cleared up that the cell function of human keratinocytes is affected by S‐HA (HA substituted with sulfated groups). Most biomedical materials contact with blood components, proteins, cells, etc. In this study, the interaction between S‐HA and blood components is discussed, that is, plasma proteins. And the application of S‐HA for new analytical and separation method of some proteins is pointed out. None of the proteins were adsorbed to HA. Fibronectin and fibinogen were adsorbed to S‐HA, but immunoglobulin‐G and insulin were not adsorbed to it as well as heparin. However, albumin could interact only with heparin, and it did not interact with S‐HA. Furthermore S‐HA adsorbed the plasma proteins that did not adsorb to heparin. It is clear that S‐HA showed different interaction with the plasma proteins in comparison with natural sulfated polysaccharides. Copyright © 2004 John Wiley & Sons, Ltd.     

Effect of molecular weight on the exponential growth and morphology of hyaluronan/chitosan multilayers: a surface plasmon resonance spectroscopy and atomic force microscopy investigation

The layer-by-layer growth of multilayer assemblies of two polysaccharides, the polyanion hyaluronan (HA) and the polycation chitosan (CH), was investigated using atomic force microscopy (AFM) and surface plasmon resonance (SPR) spectroscopy, with primary emphasis on the effect of the polysaccharide molecular weights on the film thickness and surface morphology. The HA/CH multilayers exhibit an exponential increase of the optical film thickness with the number of deposited bilayers. We show that the multilayer thickness at a given stage depends on the size of both CH, the diffusing polyelectrolyte, and HA, the non-diffusing species. Assemblies (12 bilayers) of high molecular weight polysaccharides (HA, 360,000; CH, 160,000) were twice as thick (approximately 900 nm vs approximately 450 nm) as those obtained with low molecular weight polymers (HA, 30,000; CH, 31,000), as assessed by AFM scratch tests. The exponential growth rate is the same for the high and low molecular weight pairs; the larger film thicknesses observed by SPR and by AFM arising from an earlier onset of the steep exponential growth phase in the case of the high molecular weight pair. In all cases, isolated islets form during the deposition of the first CH layer onto the underlying HA. Upon further film growth, individual islets coalesce into larger vermiculate features. The transition from distinct islands to vermiculate structures depends on the molecular weights of the polysaccharides and the lower molecular weight construct presents larger worm-like surface domains than the high molecular weight pair.     

Hyaluronic acid‐dependent protection against alkali‐burned human corneal cells

Hyaluronic acid (HA) is a high‐molecular‐weight glycosaminoglycan and extracellular matrix component that promotes cell proliferation. This study aimed to evaluate the effects of HA on alkali‐injured human corneal epithelial cells in vitro, and to elucidate the mechanisms by which HA mediates corneal cell protection. A human corneal epithelial cell line (HCE‐2) was treated with sodium hydroxide before incubation with low‐molecular‐weight HA (LMW‐HA, 127 kDa) or high‐molecular‐weight HA (HMW‐HA, 1525 kDa). A global proteomic analysis was then performed. Our data indicated that HA treatment protects corneal epithelial cells from alkali injury, and that the molecular weight of HA is a crucial factor in determining its effects. Only HMW‐HA reduced NaOH‐induced cytotoxic effects in corneal cells significantly and increased their migratory and wound healing ability. Results from 2D‐DIGE and MALDI‐TOF/TOF MS analyses indicated that HMW‐HA modulates biosynthetic pathways, cell migration, cell outgrowth, and protein degradation to stimulate wound healing and prevent cell death. To our knowledge, our study is the first to report the possible mechanisms by which HMW‐HA promotes repair in alkali‐injured human corneal epithelial cells.     

Twelve hours exposure to inhomogeneous high magnetic field after logarithmic growth phase is sufficient for drastic suppression of Escherichia coli death.

When Escherichia coli B was aerobically grown at 43 degrees C in a medium whose concentration was one-fourth that of the Luria-Bertani (LB) medium supplemented with 1.5 g/l of glutamic acid, drastic cell death was observed after the end of the logarithmic growth phase. However, when the same experiment was conducted under inhomogeneous 5.2-6.1 T magnetic field, cell death was extremely suppressed and the ratio of viable cell number under high magnetic field to that under geomagnetic field reached as much as 100,000. When the magnetic field exposure was restricted to 12 h after the logarithmic growth phase, a similar high degree of suppressive effect on the death was observed. The findings that the amount of sigma S protein encoded by the rpoS gene under the high magnetic field was larger than that under the geomagnetic field, and that the magnetic field effect disappeared when the rpoS gene-deficient strain was cultivated under the high magnetic field, suggest the interaction of magnetic field with a stationary phase specific gene.     

Inhibitory effect and mechanism on antiproliferation of isoatriplicolide tiglate (PCAC) from Paulownia Coreana

Paulownia coreana has traditionally been used as the medicine and health food in the treatment of cancer and infectious diseases. In the present study, a new antiproliferation agent, isoatriplicolide tiglate (PCAC) was isolated from the chloroform soluble fraction of the leaves of Paulownia coreana. The antiproliferation activities of PCAC plant extract was examined in breast and cervical cancer cell lines in a time-and dose-dependent manners. Our in vitro experiments showed that PCAC suppresses the cell growth and proliferation of cancer cells at a relatively low concentration (< 10 μg/mL) and induces apoptosis at a high concentration (> 50 μg/mL). Western blot analysis showed that concentration higher than 50 μg/mL induces a time-dependent increase in the percentage of apoptotic cells. In this case, PCAC uses both extrinsic and intrinsic pathways for the apoptosis. PCAC treatment decreased the expression of pro-caspase 8, 9, and 3, the main regulators of apoptotic cell death, in MDA-MB-231 cells, accompanied by the activation of caspase 8, 9, and 3. More importantly, PCAC inhibited the in vitro proliferation of six other human breast and cervical cancer cell lines. In conclusion, our data strongly suggest that PCAC acts as an antiproliferation agents particularly against breast and cervical cancers by inducing cell cycle arrest in the S/G2 phase and caspase dependent apoptosis at relatively low (< 10 μg/mL) and high (> 50 μg/mL) concentrations, respectively.     

Microcalorimetric Study of the Biological Effects of Zn^＋ on Bacillus thuringiensis Growth

A microcalorimetric technique was used to investigate the influence of Zn^2 on the growth metabolism of Bacillus thuringiensis .LKB-2277 Bioactivity Monitor was employed to obtain the power-time curves,from which the maximum peak-heat output power(Pmax) in the log phase,the growth rate constants(k), the inhibitory ratios(I) ,the generational time(tG) and the total heat effect (Qtotal) in 23 h for the growth metabolism of Bacillus thuringiensis at 28℃ can be evaluated,The results indicate that the concentration of Zn^2 affects its growth obviously,Low concentration (0-50μg/mL) of Zn^2 promotes the growth of Bacillus thuringiensis while high concentration (50-500μg/mL) of Zn^2 inhibits its growth .When the concentration reached up to 600μg/mL,it can not grow at all.     

Understanding the Influence of Phosphatidylcholine on the Molecular Weight of Hyaluronic Acid Synthesized by Streptococcus zooepidemicus

The effect of phosphatidylcholine on the molecular weight properties of hyaluronic acid (HA) was studied in batch culture of Streptococcus zooepidemicus by adding phosphatidylcholine at the early stage of exponential phase. With the addition of 80 mg/L of phosphatidylcholine, maximum HA yield (2.47 g/L) and weight-average molecular weight (902.60 KDa) were achieved, increased by 17.4% and 67.1%, respectively, as compared to the control. Metabolic flux analysis was employed to study the mechanism of phosphatidylcholine on the molecular weight of HA. The normalized flux distribution maps based on fermentation data at phosphatidylcholine addition indicated that phosphatidylcholine resulted in higher flux flowing to the HA pathway and lower flux flowing to the glycolysis and biomass synthesis pathway, coupling with higher level of UDPNAG generation and extra regeneration of ATP. The GC-MS analysis of fatty acids in the plasma membrane showed that the addition of phosphatidylcholine could promote the mobility and permeability of the cell membrane, making the HA chain pass through the membrane more easily, thus decreasing the energy consumption. All these results led to higher molecular weight of hyaluronic acid.     

Fabrication of poly(lactide‐co‐glycolide) scaffold embedded spatially with hydroxyapatite particles on pore walls for bone tissue engineering

Poly(lactide‐co‐glycolide) (PLGA) scaffolds embedded spatially with hydroxyapatite (HA) particles on the pore walls (PLGA/HA‐S) were fabricated by using HA‐coated paraffin spheres as porogens, which were prepared by Pickering emulsion. For comparisons, PLGA scaffolds loaded with same amount of HA particles (2%) in the matrix (PLGA/HA‐M) and pure PLGA scaffolds were prepared by using pure paraffin spheres as porogens. Although the three types of scaffolds had same pore size (450–600 µm) and similar porosity (90%–93%), the PLGA/HA‐S showed the highest compression modulus. The embedment of the HA particles on the pore walls endow the PLGA/HA‐S scaffold with a stronger ability of protein adsorption and mineralization as well as a larger mechanical strength against compression. In vitro culture of rat bone marrow stem cells revealed that cell morphology and proliferation ability were similar on all the scaffolds. However, the alkaline phosphatase activity was significantly improved for the cells cultured on the PLGA/HA‐S scaffolds. Therefore, the method for fabricating scaffolds with spatially embedded nanoparticles provides a new way to obtain the bioactive scaffolds for tissue engineering. Copyright © 2011 John Wiley & Sons, Ltd.     

Preparation and characterization of cross-linked hyaluronan nanoparticles

The present investigation describes the synthesis and characterization of novel biodegradable nanoparticles based on hyaluronic acid (HA). The diamine, 2,2′(ethylenedioxy)bis(ethylamine) was used for cross-linking of the HA linear chains. The condensation reaction of amino groups and pendant carboxyl groups of HA was performed in aqueous media at room temperature using water-soluble carbodiimide. The prepared nanosystems, aqueous solutions, or dispersions of nanoparticles were stable, transparent, or mildly opalescent systems depending on the ratio of cross-linking, findings consistent with values of transmittance above 77%. The structure of products was determined by nuclear magnetic resonance spectroscopy, and the particle size was identified by laser light scattering (DLS) and transmission electron microscopy (TEM) measurements. Particle size measured by TEM varied less than 130 nm; in the swollen state, the average size of the particles measured by DLS was in the range of 30–140 nm depending on the ratio of cross-linking and the molecular weight of HA. Formation of cross-linked nanoparticles results in a viscosity drop compared to the viscosity of the corresponding solution of the HA, and this trend becomes decreasingly appreciable as the molecular weight of HA decreases.     

Development and validation of a simple method for the extraction and quantification of crisaborole in skin layers

Crisaborole is a boron compound recently approved by the US Food and Drug Administration as a 2% ointment for the treatment of mild to moderate atopic dermatitis. This work describes a simple method for the quantification of the drug in the skin layers at the end of in‐vitro permeation experiments. Chromatographic separation was carried out on a reverse‐phase C₁₈ column using a mixture of trifluoroacetic acid 0.05%–acetonitrile (55:45, v/v) as mobile phase, pumped at 1 ml/min. Column temperature was 35°C and UV detection was performed at 250 nm. The method was linear in the range of concentration from 0.06 to 6 μg/ml (R² = 1) and was selective, precise and accurate. Depending on the solvent used, the LOQ ranged from 0.014 to 0.030 μg/ml and the LOD from 0.005 to 0.010 μg/ml. The extraction from all the skin layers was quantitative. The developed method was successfully tested in an in‐vitro permeation study, proving to be an effective tool in the development of new formulations containing crisaborole.     

A Simple Extraction Method for Determination of High Molecular Weight Polycyclic Aromatic Hydrocarbons in Sediments by Gas Chromatography–Mass Spectrometry

A simplified extraction method was developed for extracting high molecular weight polycyclic aromatic hydrocarbons (PAHs) from river sediments. The samples were extracted 3 times with 5 mL of solvent (toluene:methanol, 9 : 1, v/v) at 100 °C, 10 minutes for each extraction. After clean‐up and concentration, extracts were analyzed by gas chromatography coupled with mass spectrometer (GC‐MS). The extraction efficiency and accuracy was evaluated by the standard reference material (SRM‐1941b). Comparing to certified values, the average recoveries of high molecular weight PAHs with 3, 4, 5 and 6 fused benzene rings were 72.9∼113.2 % (R.S.D. 2.3∼6.3 %) except those of dibenz[a,h]anthracene (206.2±4.6 %). The average recoveries for PAHs spiked sediment samples were comparable with accelerated solvent extraction (ASE) and Soxhlet methods. The simple extraction method consumes less solvent, fewer amount of sample than those of conventional methods. The lowest quantitation limit of PAHs is 1.1 μg/kg.     

Adsorption of chlorhexidine on synthetic hydroxyapatite and in vitro biological activity

The kinetic of chlorhexidine digluconate (CHXDG) uptake from aqueous solution by hydroxyapatite (HA) was investigated by ultraviolet (UV) analysis performed in HA powder (UV-solid) after the CHX adsorption. Adsorption isotherm of chlorhexidine (CHX) uptake was modeled by a combination of Languimir and Langmuir-Freundlich mechanisms. Strong molecule-molecule interactions and positive cooperativity predominated in the surface when CHX concentration was above 8.6 μg(CHX)/mg(HA). UV-solid spectra (shape, intensity and band position) of CHX bound to HA revealed that long-range molecular structures, such as aggregates or micelles, started to be formed at low CHX concentrations (1.52 μg(CHX)/mg(HA)) and predominated at high concentrations. Grazing-incidence X-ray diffraction (GIXRD) analysis from synchrotron radiation discarded the formation of crystalline structures on HA surface or precipitation of CHX crystalline salts, as suggested in previous works. The effect of the HA/CHX association on HA in vitro bioactivity, cytotoxicity and CHX antimicrobial activity was evaluated. It was shown that CHX did not inhibit the precipitation of a poorly crystalline apatite at HA/CHX surface after soaking in simulating body fluid (SBF). Cell viability studies after exposure to extracts of HA and HA/CHX showed that both biomaterials did not present significant in vitro toxicity. Moreover, HA/CHX inhibited Enterococcus faecalis growth for up to 6 days, revealing that binding to HA did not affect antimicrobial activity of CHX and reduced bacterial adhesion. These results suggested that HA/CHX association could result in a potential adjuvant antimicrobial system for clinical use.     

Physiological activities of chitosan and N‐trimethyl chitosan chloride in U937 and 3T3‐L1 cells

Chitosan (CH) is a biopolymer with biocompatible, biodegradable, and bioactive properties. N,N,N‐trimethyl chitosan chloride (TMC) is a quaternized form of CH that is highly cationic and more water soluble than unmodified CH. The physiological activities of CHs with different molecular weights (M_w) and degrees of TMCs quaternization were investigated in U937 and 3T3‐L1 cell lines. ¹H‐NMR spectrometry and size exclusion chromatography were used for characterization of the biopolymers. The half inhibition concentration (IC₅₀) of DPPH‐radical‐scavenging activity was below 0.9 mg/m with quaternized CHs. The IC₅₀ values of chitooligosaccharides, low‐ and medium‐molecular‐weight CHs were 8.4, 10.9, and 13.9 mg/ml, respectively. High‐molecular‐weight CHs and TMCs showed apoptotic activity on U937 cells. T41, a TMC of 549 kDa with a 41% degree of quaternization (DQ), yielded 30.7% apoptotic cell death in U937 at 20 µg/ml and effectively repressed cell differentiation and triglyceride accumulation in 3T3‐L1. Depolymerized CHs reduced triglyceride accumulation but also caused cell differentiation. TMCs showed repressor activity to both cell differentiation and triglyceride accumulation. Increasing the molecular weight of CHs and TMCs generally resulted in increased physiological activity. Copyright © 2010 John Wiley & Sons, Ltd.     

An Extracellular Matrix‐Mimicking Hydrogel for Full Thickness Wound Healing in Diabetic Mice

An extracellular matrix‐mimicking hydrogel is developed consisting of a hyaluronan‐derived component with anti‐inflammatory activity, and a gelatin‐derived component offering adhesion sites for cell anchorage. The in situ‐forming hyaluronan‐gelatin (HA‐GEL) hydrogel displays a sponge‐like microporous morphology. Also, HA‐GEL shows a rapid swelling pattern reaching maximum weight swelling ratio within 10 min, while at the equilibrium state, fully swollen hydrogels display an exceedingly high water content with ≈2000% of the dry gel weight. Under typical 2D cell culture conditions, murine 3T3 fibroblasts adhere to, and proliferate on top of the HA‐GEL substrates, which demonstrate that HA‐GEL provides a favorable microenvironment for cell survival, adhesion, and proliferation. In vivo healing study further demonstrates HA‐GEL as a viable and effective treatment option to improve the healing outcome of full thickness wounds in diabetic mice by effectively depleting the inflammatory chemokine monocyte chemoattractant protein‐1 in the wound bed.     

Eine verbesserte fluorimetrische Serumcortisolbestimmung

The fluorometric determination of cortisol in serum was improved by the following measures:

1. Daily preparation of the fluorescence reagent (ethanol abs.: conc. H₂SO₄= 3∶7, v/v) at 0°C.
2. Fluorometry 80 min after the addition of the fluorescence reagent to dichloromethane extracted cortisol.
3. Filling of a special micro-cuvette by a pump system avoiding bubble formation in the cuvette.
4. Spectrofluorometer with optimal absorption (464 nm) and emission (522 nm) for cortisol. The method is of satisfactory sensitivity for cortisol (< 1 μg/100 ml), precision (10 μg/100 ml ∶ S.D. = 0.5 μg/ 100 ml) and reproducibility from day to day (variation coefficient = 6–7%). The specificity of the method is demonstrated by the low values (< 2 μg/100 ml) of total-adrenalectomized patients under dexamethasone maintainance (2 × 0.25 mg/day). The normal range (mean ± 2 S.D., logarithmic distribution) of 9⁰⁰ a.m. serum cortisol values of control persons is 9.7–32.0 μg/100 ml. Examples of the application of the method for diagnostic and therapeutic questions are reported.

     

Layer-by-layer films from hyaluronan and amine-modified hyaluronan

Hyaluronan is a polysaccharide that is increasingly investigated for its role in cellular adhesion and for the preparation of biomimetic matrices for tissue engineering. Hyaluronan gels are prepared for application as space fillers, whereas hyaluronan films are usually obtained by adsorbing or grafting a single hyaluronan layer onto a biomaterial surface. Here, we examine the possibility to employ the layer-by-layer technique to deposit thin films of cationic-modified hyaluronan (HA+) and hyaluronan (HA) of controlled thicknesses. The buildup conditions are investigated, and growth is compared to that of other polyelectrolyte multilayer films containing either HA as the polyanion or HA+ as the polycation. The films could be formed in a low ionic strength medium but are required to be cross-linked prior to contact with a physiological medium. NIH3T3 fibroblasts were perfectly viable on self-assembled hyaluronan films with, however, a preference for hyaluronan ending films. These findings point out the possibility to tune the thickness of thin hyaluronan films at the nanometer scale. Such architectures could be employed for investigating cell/substrate interactions or for functionalizing biomaterial surfaces.     

Gadolinium diethylenetriaminepentaacetic acid hyaluronan conjugates: preparation,properties and applications

We have prepared new hyaluronan (HA) gadolinium diethylenetriaminepentaacetic acid (DTPA) conjugates that have potential as tumor specific contrast agents for magnetic resonance imaging. Conjugates were synthesized, starting with a high molecular weight HA or with HA oligomers, by an efficient 2-step procedure involving first, reaction of ethylenediamine with HA carboxylic acid groups and, second, covalent linkage of DTPA to aminated HA. The final polymers were compared in terms of molar masses and DTPA content. Tapping mode atomic force microscopy has been used to examine the morphology of the polymers in aqueous solution.     

Effects of oxymatrine on proliferation and apoptosis in human hepatoma cells

Oxymatrine, a natural quinolizidine alkaloid, has been known having cytotoxic and chemopreventive effects on various cancer cells. To investigate the possible mechanism of oxymatrine's role on cancer cells, in the present study, we examined further the effects of oxymatrine on the growth, proliferation, apoptosis and expression of bcl-2 and p53 gene in human hepatoma SMMC-7721 cells in vitro. Our results show that oxymatrine notably inhibits the growth and proliferation of SMMC-7721 cells and it present a dose-dependence and time-dependence manner within definite reacting dose and time. Oxymatrine block SMMC-7721 cells in G2/M and S phase; prevent cells entering into G0/G1 phase. It results in an obvious accumulation of G2/M and S phase cells while decrease of G0/G1 phase cells. Oxymatrine induce apoptosis of SMMC-7721 cells and apoptotic rate amount to about 60% after treatment with 1.0 mg/ml oxymatrine for 48 h. We also find that oxymatrine down-regulate expression of bcl-2 gene while up-regulate expression of p53 gene. These results demonstrate that oxymatrine inhibit the proliferation and induce apoptosis of human hepatoma SMMC-7721 cells, and suggest that this effect was mediated probably by a significant cell cycle blockage in G2/M and S phase, down-regulation of bcl-2 and up-regulation of p53.     

A Selective Immunosensor for D‐dimer Based on Antibody Immobilized on a Graphene Electrode with Incorporated Lipid Films

The present article describes a miniaturized potentiometric D‐dimer biosensor on graphene nanosheets with incorporated lipid films. The graphene electrode was used for the development of a very selective and sensitive immunosensor for the detection of D‐dimer by immobilizing the mouse anti human D‐dimer antibody on stabilized lipid films. The immunosensor responded for the wide range of D‐dimer concentrations with fast response time of ca. 15 s. The presented potentiometric D‐dimer biosensor is easy to construct and exhibits good reproducibility, reusability, selectivity, rapid response times, long shelf life and high sensitivity of ca. 59 mV/decade over the D‐dimer logarithmic concentration range from 10^?6 μg/L to 10^?3 μg/L.     

Structure and optoelectronic properties of PbSe quantum dots /PVA. Does the polymer molecular weight matter?

Polyvinyl alcohol (PVA) with different molecular weights (8000, 14,000, and 132,000 g/mol) capped lead selenide (PbSe) quantum dots (QDs) are prepared. The nanocomposites are characterized by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). XRD and TEM studies show that the particle size of PbSe QDs decrease with the increase in PVA molecular weight and/or PVA amount. This may be due to the increase in molecular weight inhibiting further growth of PbSe into the polymer matrix. Thermogravimetric analysis showed that the introduction of PbSe QDs into PVA decreases the crystallinity of the polymer. The optical absorption spectroscopy of prepared nanocomposites showed that the absorption peaks are strongly shifted to the lower wavelength (blue shift) from near infrared region to visible region by increasing the PVA molecular weight. The (I–V) characteristic curves of the PVA/PbSe nanocomposite films under illumination showed a photovoltaic cell‐like behavior. The results indicated that as the molecular weight of polymer increases, the conversion efficiency increases. Copyright © 2010 John Wiley & Sons, Ltd.