Study of the reaction of methyl 4‐nitrobenzenesulfonate and Br− in water–glycerol cationic micellar solutions

The reaction of methyl 4‐nitrobenzenesulfonate (MNB) and Br^? has been studied in water–glycerol (GLY) alkyltrimethylammonium bromide micellar solutions, with the weight percentage of glycerol up to 50%. A pseudophase kinetic model was used for quantitatively discussing the kinetic data. Results showed that the equilibrium‐binding constant for the organic substrate molecules to the cationic micelles decreases upon increasing the amount of glycerol present in the micellar reaction media. The second‐order rate constant of the reaction in the micellar pseudophase is practically independent of wt% of GLY. Similar results were found in other water–organic solvent alkyltrimethylammonium bromide micellar solutions for the same process. However, the dependence of the reaction rate, for a given surfactant concentration, on the wt% of organic solvent is weaker for glycerol than for the other organic solvents. This was explained by considering that the cationic micellar ionization degree is nearly independent of wt% GLY. As a consequence, bromide ions concentration in the interfacial region (the reaction site) does not change by varying wt% of GLY. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 845–582, 2008     

Effects of head group size on the reaction methyl 4‐nitrobenzenesulfonate + Br− in water‐ethylene glycol cetyltrialkylammonium bromide micellar solutions

The reaction methyl 4‐nitrobenzenesulfonate + Br^? has been studied in water‐ethylene glycol cetyltrialkylammonium bromide (alkyl = methyl, ethyl, propyl, and butyl) micellar solutions by changing surfactant concentration as well as the weight percentage of ethylene glycol present in the bulk phase. The pseudophase model was adequate to rationalize quantitatively the micellar kinetic effects. Information about the influence of the head group size on the second‐order rate constant of the process and on the binding equilibrium constant of the organic substrate to the cationic micelles in water–ethylene glycol mixtures was obtained. Kinetic data taken from the literature were compared to those obtained in this work in order to examine the different effects produced by an alcohol that is localized in the bulk phase, such as ethylene glycol, with those caused by an alcohol that distributes between the bulk and micellar pseudophases, such as 1‐butanol. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 346–352, 2007     

Kinetics of the reaction of methyl 4‐nitrobenzenesul‐fonate + Br− in ethanol amine based surfactants

The kinetics of the reaction of methyl 4‐nitrobenzenesulfonate + Br^? ions has been studied in ethanol amine based (alkyldimethylethanolammonium bromide and alkyldiethylethanolammonium bromide) surfactant solutions. The observed first‐order rate constants increase monotonically with surfactant concentration, with hydrophobic chain length and with head group bulk in a manner similar to other quaternary ammonium surfactants. The results were analyzed using the pseudophase model of micellar rate effects in conjunction with a Langmuir form to describe micellar binding of bromide ion. An attempt to estimate activation parameters of the reaction from temperature variance of micellar pseudophase rate constants has also been made. © 2006 Wiley Periodicals, Inc. Int J Chem Kinet 38: 303–308, 2006     

A kinetic method to estimate dissociation degrees of micellar aggregates in TTAB–alcohol aqueous micellar solutions

The reactions of dehydrochlorination of 1,1‐trichloro‐2,2‐bis(p‐chlorophenyl)ethane, DDT, and 1,1‐dichloro‐2,2‐bis(p‐chlorophenyl)ethane, DDD, with hydroxide ions were studied in various TTAB–alcohol (TTAB = tetradecyltrimethylammonium bromide) aqueous micellar solutions as a function of alcohol content. The alcohols used were heptanol, hexanol, pentanol, butanol, isobutanol, tert butanol, propanol and isopropanol. Kinetic data show that the dissociation degree of the micelles is the main factor controlling reactivity in all the TTAB–alcohol micellar solutions. This fact permits the development of a kinetic method in order to estimate the dissociation degree of the micellar aggregates present in the alcohol–TTAB aqueous micellar solutions. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 204–209, 2000     

Study of the reaction methyl 4‐nitrobenzene‐sulfonate + Cl− in mixed hexadecyltrimethyl‐ammonium chloride‐triton X‐100 micellar solutions

The reaction methyl 4‐nitrobenzenesulfonate + Cl^? was studied in hexadecyltrimethylammonium chloride (CTAC) in the absence and presence of 0.1 M NaCl, as well as in mixed CTAC/Triton X‐100 (polyoxyethylene(9.5)octylphenyl ether) aqueous micellar solutions with CTAC molar fractions of 0.9, 0.8, 0.7, and 0.6. Conductivity measurements were used to obtain critical micellar concentrations and micellar ionization degrees of the various micellar reaction media. From these data, thermodynamic information on the cationic/nonionic mixed micellar solutions was obtained. Micellar effects on the observed rate constant were explained by pseudophase kinetic models. The estimated second‐order rate constants in the micellar pseudophase of the different micellar reaction media showed that pure CTAC and mixed CTAC/Triton X‐100 micelles, at the high cationic surfactant molar fractions studied, provide reaction sites of similar characteristics at the interfacial region. This was in agreement with previous structural studies carried out on mixed CTAC/Triton X‐100 micellar solutions. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 35: 45–51, 2003     

Heat capacities of butanol and pentanol in aqueous dodecyltrimethylammonium bromide solutions

Heat capacities of the ternary systems water-dodecyltrimethylammonium bromide (DTAB)-butanol and water-DTAB-pentanol were measured at 25°C. The standard partial molar heat capacities of pentanol in micellar solutions show a maximum at about 0.35 mol-kg^–1 DTAB that has been attributed to a micellar structural transition. This maximum tends to vanish by increasing the alcohol concentration and by decreasing the alcohol alkyl chain length; in the case of butanol it was not detected. The behavior of the standard partial molar heat capacities of alcohols in micellar solutions in the region above the cmc and below the structural transition was explained using a previously reported mass-action model for the alcohol distribution between the aqueous and the micellar phase and the pseudophase transition model for micellization. In the resulting equation the contributions due to the temperature effect on the shift of both the micellization equilibrium and the distribution are shown to be negligible so that only the distribution effect and the shift of the micellization equilibrium due to the added alcohol remain. The distribution constant and the partial molar heat capacities of alcohols in the aqueous and micellar phases have been derived by linear regression. The distribution constant for both alcohols agree well with those previously obtained using different techniques. Since the best fit below the structural transition correlates as well with the experimental points above the structural transition, it seems that no difference exists in the standard partial molar heat capacities of alcohols in the two shapes of the micelles. Also, from the present data and those for alkanols in sodium dodecylsulfate reported in the literature it seems that the standard heat capacity of alcohols in the micellar phase does not depend on both the alcohol alkyl chain length and the nature of the hydrophilic moiety of the head group of the micelles.     

Micellar‐accelerated hydrolysis of organophosphate and thiophosphates by pyridine oximate

Rate constants for the hydrolysis reaction of phosphate (paraoxon) and thiophosphate (parathion, fenitrothion) esters by oximate (pyridinealdoxime 2‐PyOx⁻ and 4‐PyOx⁻) and its functionalized pyridinium surfactants 4‐(hydroxyimino) methyl)‐1‐alkylpyridinium bromide ions (alkyl = C_nH_2n+1, n = 10, 12, 14, 16) have been measured kinetically at pH 9.5 and 27°C in micellar media of cationic surfactants cetyltrimethylammonium bromide (CTAB) and cetylpyridinium bromide (CPB). Acid dissociation constant, pK_a, of oximes has also been determined by spectrophotometric, kinetic, and potentiometric methods. The rate acceleration effects of cationic micelles have been explored. Cationic micelles of the pyridinium head group (CPB) showed a large catalytic effect than the ammonium head group (CTAB). The effects of pH, oximate concentration, and surfactants have been discussed.     

Thermosensitive copolymers having soluble and insoluble monomer units,poly(N‐vinylacetamide‐co‐methyl acrylate)s: Effect of additives on their lower critical solution temperatures

New thermosensitive polymers were synthesized by copolymerization between N‐vinylacetamide (NVA) and methyl acrylate whose homopolymers are soluble and insoluble in water, respectively. The lower critical solution temperature (LCST) of the obtained copolymers ranged between 59 and 83 °C, and the LCST increased with an increasing NVA content in the copolymers. The effectiveness of various salts addition on lowering the LCST of the copolymer solutions followed Hoffmeister series. NaCl and Na₂SO₄ addition linearly lowered the LCST with an increasing salts concentration, and slopes of the lines were almost constant regardless of the copolymer composition. The effectiveness of alcohols with various alkyl chain lengths on lowering the LCST did not follow the viscosity B coefficient values of the alcohols, which was probably the result of preferential adsorption of the alcohols to the copolymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2651–2658, 2004     

Effect of ethanol on micellization and on decarboxylation of 6-nitrobenzisoxazole-3-carboxylate in aqueous cationic micelles

The effects of ethanol on the critical micellar concentration (cmc) and the rates of decarboxylation of 6-nitrobenzisoxazole-3-carboxylate (6-NBIC) have been investigated in aqueous cationic surfactants of the cetyltrialkylammonium family with bromide [CT(R)ABr], chloride [CT(R)ACl], and nitrate [CT(R)ANO3] counterions, and methyl (CTAX), n-propyl (CTPAX), and n-butyl (CTBAX) as the head group alkyl moieties. Effects upon cmc and reactivity are similar, featuring a break at the ethanol mole fraction, x(EtOH), of ca. 0.055; these effects have been related to changes in solvent structure, with formation of a clathrate at x(EtOH) = 0.055. Rate data in CTBABr were further investigated and fitting of raw kinetic data to the pseudophase model is possible up to x(EtOH) = 0.1, showing an unexpected decrease of rate constant values in the micellar pseudophase, kM', as ethanol content increases: a significant variation of micellar ionization degree could account for this kinetic effect.     

Micelle formation of a cationic surfactant in the presence of 1,n-alkanediol and the miscibility of alcohols in micelles

Micelle formation of dodecyltrimethylammonium bromide (DTAB) was examined in the presence of α,ω-alkanediols applying conductivity measurements. Octanediol and hexanediol promoted the formation of mixed micelles of DTAB and the alcohol, but butanediol interfered with micellization. Analysis of the critical micelle concentration (cmc) based on the lattice model for mixed solution with the Bragg–Williams approximation indicated an unfavorable interaction between alcohol and water and a favorable interaction between the alcohol and surfactant, with the exception of butanediol. The exchange energy between alcohol and water was 0.5kT higher for alkanediol (C_2n(OH)₂) than for the corresponding regular alcohol (C_nOH), which is believed to have resulted from the smaller mixing entropy for the alkanediol than for the corresponding regular alcohol. It was inferred from the analysis that the cmc increase for C₄(OH)₂ was caused by favorable interaction with water but unfavorable interaction with the micellar surfactant.     

Study of the bromide oxidation by bromate in zwitterionic micellar solutions

The redox reaction Br⁻ + BrO₃⁻ has been studied in aqueous zwitterionic micellar solutions of N‐tetradecyl‐N, N‐dimethyl‐3‐ammonio‐1‐propanesulfonate, SB3‐14, and N‐hexadecyl‐N,N‐dimethyl‐3‐ammonio‐1‐propanesulfonate, SB3‐16. A simple expression for the observed rate constant, k_obs, based on the pseudophase model, could explain the influences of changes in the surfactant concentration on k_obs. The kinetic effect of added NaClO₄ on the reaction rate in SB3‐14 micellar solutions has also been studied. They were rationalized by considering the binding of the perchlorate anions to the sulfobetaine micelles and their competition with the reactive bromide ions for the micellar surface. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 388–394, 2000     

Micellar properties of tetradecyltrimethylammonium nitrate in aqueous solutions at various temperatures and in water-benzyl alcohol mixtures at 25 °C

The micellar properties of tetradecyltrimethylammonium nitrate (C14TANO₃) in aqueous solutions in the temperature range of 10 to 35 °C and in aqueous solutions of benzyl alcohol (BzOH) at 25 °C were studied conductometrically. The specific conductivity data served for the evaluation of critical micelle concentration, cmc, and the degree of ionization of the micelles, , of the surfactant. From the temperature dependence of the cmc the thermodynamic parameters for micellization of C14TANO₃ were calculated by applying Mullers modified equation. BzOH was found to affect strongly the cmc and values of the surfactant. The plot of the cmc/cmc_o ratio (where cmc_o is for pure water) as a function of BzOH molality, exhibits a characteristic break, which was attributed to the commencement of self-association of BzOH in aqueous solution at a molality of ca. 0.05. By applying the theoretical treatment suggested by Motomura for binary surfactant systems, the molar fraction of BzOH in the micelles at cmc, was estimated as a function of molality of the alcohol. C14TANO₃ appears to be slightly more hydrophobic compared to the corresponding bromide.     

Enthalpies of solution and dilution of butanol and pentanol in dodecyltrimethylammonium bromide micellar solutions

The enthalpies of solution and of dilution of 1-butanol and 1-pentanol were measured in micellar solutions of dodecyltrimethylammonium bromide by systematically changing the concentration of alcohols and surfactant. The enthalpies of solution at infinite dilution of alcohols at each surfactant concentration were evaluated from a linear plot. This quantity increases with surfactant concentration (up to 0.8m) with a curvature which depends on the alcohol alkyl chain length. The difficulties arising for a quantitative treatment of both the enthalpies of dilution and of solution at finite alcohol concentrations are discussed. The dependence on the surfactant concentration of the standard enthalpies of solution and the enthalpies of dilution for m0 are rationalized. From the resulting equations the distribution constant, standard enthalpy of transfer, standard enthalpy of solution, and the alcohol-alcohol interaction parameter in the micellar phase are evaluated. The enthalpies of transfer obtained using this technique agree well with those previously reported from enthalpies of mixing. The distribution constants also agree with those reported in the literature from several approaches: mixing enthalpies, partial molar volumes, and the dependence of the cmc on added alcohol.     

Spectroelectrochemical and spectrophotochemical properties of N-tetradecyl-N '-ethyl-viologen: Micellar effects

The results of Spectroelectrochemical studies in homogenous solutions have shown that below the cmc value the cation radical of N-tetradecyl-N '-ethyl viologen (TDEV) dimerizes. The TDEV and tetradecyltriethyl-ammonium bromide (TDEA) micelles were found to stabilize the cation radical TDEV^.+ and increase the rate constant for the reaction TDEV+TDEV²⁺ = TDEV^.+ as compared with the results obtained at concentrations below cmc.Based on the spectrophotochemical measurements for TDEV it was found that the quantum yield (Φ) of photoreduction in micellar evironment of TDEA was twice as large as Φ for reactions performed in homogenous solution. Moreover, in micellar solutions photoreduction of TDEV leads to a cation radical of reduced TDEV (TDEV⁺), but in homogenous solution to the dimer of TDEV [TDEV]₂. Therefore, the process of dimerization of TDEV^.+ cation radical is inhibited by micellar catalysis.     

Micellization of Cetylpyridinium Chloride Using Conductometric Technique

Abstract

Conductometric technique has been used to investigate the equilibrium properties of cetylpyridinium chloride (CPC) in the presence of a series of aliphatic alcohols. The dependence of conductivity of surfactant solution in the presence of particular amount of alcohol has been studied. According to the experimental results, ethanol cause to decrease the dielectric constant and conductivity of micellar solution. Alcohols with longer chain may change the conductivity of solution depend on concentration of surfactant. At low concentration of CPC near critical micelle concentration (cmc) region, the minimum value of conductivity can be observed. This minimum value can be controiled by decreasing of free monomer concentration and also increasing degree of dissociation of micelle because of penetration of alcohols in micellar core. Using Conductometric technique cmc and α (degree of dissociation of counterion) of CPC were evaluated. The micelle formation of CPC has been considered in ethylene glycol (E.G)/ water and glycerol/water mixtures. It has been shown, the logarithm of cmc is directly depended on the ratio of E.G/water or glycerol/water.     

Formation of micelles of cetyltrimethylammonium chloride and cetyltrimethylammonium bromide in N-methyl acetamide—alcohol and N,N-dimethyl acetamide—alcohol mixtures

The critical micelle concentrations of cetyltrimethylammonium chloride and cetyltrimethylammonium bromide in solutions of in N-methylacetami de and in N,N-dimethyl acetamide with added methanol, ethanol, n-propanol, n-butanol and n-pentanol were determined using electrical conductivity and surface tension measurements at various temperatures. Both methods show that micelles are formed in N-methyl acetamide and N, N-dimethyl acetamide solutions in a presence of n-alcohols. Critical micelle concentrations were also determined as functions of concentration of added alcohol. The data suggest that alcohol adding leads to an enhancement of penetration of alcohol into the micelle external shell that depends on the alcohol chain length. Thermodynamic parameters for micellar systems in a presence of n-alcohols were also calculated.     

Effects of Short‐Chain Alcohol on the Micellization of Gemini Surfactant C16‐6‐16 · 2Br in Aqueous Solution

The effects of ethanol, n‐butanol, and n‐hexanol on the micellization of cationic Gemini surfactant C16‐6‐16 · 2Br have been investigated using conductance and steady fluorescence measurements. The results show that the critical micelle concentration (CMC) increases with the addition of ethanol, but decreases with n‐butano1 or n‐hexanol. With the addition of the above alcohols, both the micelle ionization degree and the mole fraction of alcohol in the micelle increase, however, the micelle aggregation number decreases at a fixed concentration of surfactant. When given a special concentration of alcohol, the micelle aggregation number increases as the increase of the surfactant concentration.     

Activity of α‐Chymotrypsin in Cationic and Nonionic Micellar Media: Ultraviolet and Fluorescence Spectroscopic Approach

α‐Chymotrypsin (α‐CT) activity was measured in aqueous buffer with the following alkyltriphenylphosphonium bromide surfactants in the series cetyl, tetradecyl, and dodecyl as a tail length. For the sake of comparison with mixed micellar investigation on activity of α‐CT, cationic cetyltriphenylphosphonium bromide (CTPB) and nonionic surfactant Triton X‐100, Brij‐56, Brij‐35, Tween 20, and Igepal Co‐210 have been used. The p‐nitrophenyl acetate (PNPA) hydrolysis rate was determined at the surfactant concentration of both cationic and mixed micellar systems by a UV–vis spectrophotometer. The catalytic reaction follows the Michaelis–Menten mechanism, and the catalytic efficiency (k_cat/K_M) was evaluated for both homogeneous and mixed‐micellar media. The maximum catalytic efficiency was observed at 5 mM concentration of CTPB, but the highest catalytic efficiency, 572 M^?1 s^?1, was measured in the presence of mixed micellar (7.5 mM CTPB + 2.5 mM Tween‐20). The fluorescence (FL) spectra showed the differences of α‐CT conformations in the presence of cationic surfactants. The FL results suggest that the influence of cationic surfactant on proteolysis arises from the interaction with the α‐CT. The binding constant, k_sv, of α‐CT with cationic aggregates was determined in the buffer using the Stern–Volmer equation by the fluorescence spectroscopic approach.     

Kinetics of malachite green fading in water–ethanol–2‐propanol ternary mixtures

The rate constant of malachite green (MG⁺) alkaline fading was measured in water–ethanol–2‐propanol ternary mixtures. This reaction was studied under pseudo‐first‐order conditions at 283–303 K. It was observed that the observed reaction rate constants, k_obs, were increased in the presence of different weight percentages of ethanol and 2‐propanol. The fundamental rate constants of MG⁺ fading in these solutions were obtained by using the SESMORTAC model. In each series of experiments, the concentration of one alcohol was kept constant and the concentration of the second one was changed. It was observed that at the constant concentration of one alcohol and variable concentrations of the second one, with an increase in temperature, k₂ values decrease according to the trend of hydroxide ion nucleophilic parameter values and k₁ values increase. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 441–453, 2011     

Partitioning of unsaturated hydrophilic monomer in microemulsion media monitored by pyrene fluorescence method

The extent of intra‐ and interchain associations of (un)charged water‐soluble monomers in the homogeneous and micellar solutions was studied with steady‐state fluorescence spectroscopy. Fluorescence spectroscopic experiments were performed on uncharged (acryl amide) and charged hydrophilic monomers [zwitterionic 3‐dimethyl(methacryloyloxyethyl)ammonium propane sulfonate (DMAPS), etc.] with pyrene as a probe. In both the homogeneous and micellar solutions, linear Stern–Volmer plots were obtained that implied that the quenching process can be considered as totally dynamic. The Stern–Volmer constant (K_SV) for DMAPS decreased with an increasing dielectric constant of solvent and the concentration of simple electrolyte. An abrupt decrease in K_SV was observed in the presence of a small amount of anionic emulsifier [below the critical micelle concentration (cmc)]. The dependence of K_SV on pH for DMAPS was described by a curve with a maximum at about pH = 7. This was interpreted in terms of segregation of DMAPS and the variation of a optimal microenvironment for the probe and quencher with pH. The quenching rate in the micellar solutions strongly increased above the cmc but was lower than that in the homogeneous solutions. In the micellar solutions (above the cmc), the microenvironment for an interaction between the probe and quencher was suggested to be the whole microdroplet. The dependence of K_SV on pH for DMAPS is described by a curve with a maximum at about pH = 9.3. The synergistic effect arises from the segregation of charged quencher molecules within the microdroplets. The complex (or strong interaction) between quencher and additive(s) is supposed to increase the dynamic nature of microdroplets that provides an optimal microenvironment for probe and quencher. A good coemulsifier, however, removes quencher from the interface and creates a barrier for entering monomer (quencher) into the core of micelles; therefore, quenching is depressed. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 571–581, 2003