Aqueous pretreatment for reactive ball milling of cellulose

Aqueous swelling pretreatment of cellulose was found highly effective for reactive ball milling to prepare surface-esterified cellulose nanofibers. Compared with starting from dry cellulose, water- or 2 % NaOH-pre-swollen materials were esterified and dispersed in significantly shorter milling time. Especially commercial kraft pulp was difficult to disperse even with water pretreatment, but 2 % NaOH treatment gave full surface esterification with a bulk degree of substitution of 0.69 by 12-h ball milling, presumably because of removal of non-cellulosic components.     

Synthesis and properties of poly(acrylamide‐co‐acrylic acid)/polyacrylamide superporous IPN hydrogels

Poly(acrylamide‐co‐acrylic acid)/polyacrylamide [P(AM‐co‐AA)/PAM] hydrogel with superporous and interpenetrating network (IPN) structure was prepared by a prepolymerization reaction and a synchronous polymerization reaction and frothing process. Scanning electron microscope (SEM) images show that the resultant hydrogel possesses abundant interconnected pores. DSC indicates that the porous structure enhances the swelling ratio and reduces the interaction between water and the hydrogel. In contrast, the IPN by PAM decreases water absorbency and enhances water retentivity. It is found that a superporous stucture in the hydrogel increases the equilibrium swelling ratio and decreases the compressive strength of the hydrogel. On the other hand, the increase in AM oligomer (oligo‐AM) amount decreases the equilibrium swelling ratio and improves the compressive strength of the hydrogel. Therefore, the two‐steps synthesis method can be used to construct a hydrogel with superporous and IPN structure. The swelling and mechanical properties of the hydrogel can be improved effectively. Copyright © 2008 John Wiley & Sons, Ltd.     

New process for producing cellulose acetate from wood in concentrated acetic acid

To explore further potential applications of acetic acid pulp, an investigation was conducted to develop a direct method for producing cellulose acetate from wood in combination with atmospheric acetic acid pulping. The process consists of delignification, totally chlorine-free bleaching, and esterification, with the concentrated acetic acid aqueous solution being used as only solvent throughout the process. The acetic acid pulp with kappa number of 30 and ISO brightness of 16 was bleached with 5% ozone on pulp to kappa number of 1.4 and brightness of 61. The resulting bleached pulp was further bleached with peracetic acid to kappa number of less than 1.0 and brightness of 68. The final bleached acetic acid pulp was acetylated with acetic anhydride in the concentrated acetic acid for 45 min to produce cellulose acetate with an apparent degree of substitution (DS) of 2.54. Although the product was lower grade compared with commercially available cellulose diacetate because it was prepared from the chemical pulp but not dissolving pulp, the product was almost soluble in acetone. Eventually, the DS of the acetone-soluble fraction was 2.62. The acetone solubility might be attributed to the original acetic acid pulp that had been partially acetylated during the pulping.     

The effect of eucalypt pulp xylan content on its bleachability,refinability and drainability

Currently, bleached eucalypt pulps are largely used for printing and writing (P&W) and sanitary (tissue) paper grades. Among the many pulp quality requirements for P&W and tissue paper production the xylan content is one of the most significant. For P&W papers, increasing xylans improve pulp refinability and strength properties but negatively affect bulk and drainability. For tissue paper, xylans are purportedly advantageous during paper drying in the Yankee cylinder but negatively affect paper bulk and may increase dusting during paper manufacture. On the other hand, bleachability is a very important parameter for both P&W and tissue grade pulps since bleaching cost is the second most significant in eucalypt bleached kraft pulp production. The aim of this study was evaluating the influence of eucalyptus pulp xylan content on its bleachability, refinability and drainability. A sample of industrial unbleached eucalyptus kraft pulp containing 15.6?% xylans was treated with various alkali charges at room temperature in order to obtain materials with different xylan contents. The pulps were bleached to 90 % ISO brightness with the O–D_HT–(EP)–D sequence and evaluated for their refinability and drainability. By increasing the alkali concentration in the range of 10–70 g/L pulps of 14.5–5.9 % xylans were produced with no significant impact on cellulose crystallinity. The decrease of xylan content significantly decreased pulp bleaching chemical demand, water retention value and refinability and increased pulp drainability.     

Preparation of hydrogel from green polymer

A new method was used for the production of hydrogels from green polymer with a higher swelling ratio. These hydrogels were synthesized first by graft copolymerization between acrylamide (AM) and poly(vinyl alcohol) (PVA) with alkaline or kraft lignin (AM‐PVA‐g‐lignin) and then by mixing with acrylamide monomer. The kraft and alkaline lignins were isolated from pulping liquor and characterized using UV and FT‐IR spectroscopy, and the formed hydrogels were characterized using FT‐IR spectroscopy and scanning electron microscopy (SEM). Compared with kraft lignin hydrogel, the alkaline lignin hydrogel had very high swelling ratios and slower water uptake and deswelling rates attributed to its compatible network structure. The hydrogels formed were used also to study the influence of sodium chloride on the absorption capacity at room temperature and swelling ratios at different temperatures. Copyright © 2004 John Wiley & Sons, Ltd.     

Swelling equilibria and dye adsorption studies of chemically crosslinked superabsorbent acrylamide/maleic acid hydrogels

Superswelling acrylamide (AAm)/maleic acid (MA) hydrogels were prepared by free radical polymerization in aqueous solution of AAm with MA as comonomer with some multifunctional crosslinkers such as trimethylolpropane triacrylate and 1,4-butanediol dimethacrylate. AAm/MA hydrogels were used in experiments on swelling and adsorption of a water-soluble monovalent cationic dye such as Basic Blue 17 (Toluidin Blue). As a result of dynamic swelling tests, the influence of relative content of MA on the swelling properties of the hydrogel systems was examined. AAm/MA hydrogels were swollen in the range 1660-6050% in water, while AAm hydrogels swelled in the range 780-1360%. Equilibrium water content of AAm/MA hydrogels were calculated in the range 0.8873-0.9837. Water intake of hydrogels followed a non-Fickian type diffusion. The uptake of the cationic dye, BB-17 to AAm/MA hydrogels is studied by batch adsorption technique at 25 °C. In the experiments of the adsorption equilibrium, S-type adsorption in Giles's classification system was found. The binding ratio of hydrogel/dye systems was gradually increased with the increase of MA content in the AAm/MA hydrogels.     

Trichoderma reesei cellulases and their core domains in the hydrolysis and modification of chemical pulp

The action of monocomponent Trichoderma reesei endoglucanases (EG I, EG II; EC 3.2.1.4) and cellobiohydrolases (CBH I, CBH II; EC 3.2.1.91) and their core proteins was compared using isolated celluloses and bleached chemical pulp. The presence of cellulose binding domain (CBD) in the intact enzymes did not affect their action against soluble substrates. In the case of insoluble isolated celluloses and the chemical pulp the presence of CBD enhanced the enzymatic hydrolysis of cellulose. The effect of CBD was more pronounced in the cellobiohydrolases, hydrolysing mainly crystalline cellulose, than in the endoglucanases which were more efficient in hydrolysing amorphous cellulose. The pulp properties measured, that is, viscosity and strength after PFI refining, were equally affected by the treatment with intact enzymes and corresponding core proteins, suggesting that the presence of CBD in intact cellulases affects mainly the cellulose hydrolysis level and less the mode of action of T. reesei cellulases in pulp. The better beatability of the bleached chemical pulp treated with intact endoglucanases than that treated with the corresponding core proteins suggests that the presence of CBD in endoglucanases could, however, result in beneficial effects on pulp properties.     

Self‐reinforcing hydrogels comprised of hydrophobic methyl methacrylate macromers copolymerized with N,N‐dimethylacrylamide

Methyl methacrylate macromers were synthesized by a catalytic chain‐transfer polymerization, with number‐average molecular weight values ranging from 600 to 26,000. These macromers subsequently were copolymerized with dimethyl acrylamide in bulk by γ radiation to yield transparent xerogel materials. The copolymerization was confirmed by NMR analyses and by subsequent aqueous extractions of the resultant copolymers. On swelling in deionized water, hydrogels were formed that had significantly higher Young's moduli than hydrogels based on statistical methyl methacrylate/dimethyl acrylamide copolymers of equivalent composition. If macromers of high molecular weight were used, phase separation occurred, resulting in opaque hydrogel compositions. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 810–817, 2000     

Novel salep‐based chelating hydrogel for heavy metal removal from aqueous solutions

A novel optimized chelating hydrogel was synthesized via graft copolymerization of acrylamide and 2‐hydroxyethyl methacrylate (as two‐dentate chelating co‐monomer) onto salep (a multicomponent polysaccharide obtained from dried tubers of certain natural terrestrial orchids) using N,N′‐methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator. Reaction parameters (N,N′‐methylenebisacrylamide and ammonium persulfate amounts as well as acrylamide/2‐hydroxyethyl methacrylate weight ratio) affecting the water absorption of the chelating hydrogel were optimized using a systematic method to achieve a hydrogel with high swelling capacity as possible. Heavy metal ion adsorption capacity of the optimized hydrogel for metal ions [Cu (II), Pb (II), Cd (II), and Cr (III)] were investigated in aqueous media containing different concentrations of these ions (5–50 ppm). The results showed that the hydrogel have great potential for heavy metal removal from aqueous solutions. The hydrogel formation was confirmed by Fourier transform infrared spectroscopy, and surface morphology study of the hydrogel was performed by scanning electron microscope. Copyright © 2016 John Wiley & Sons, Ltd.     

Dendronized Cellulose Nanocrystals as Templates for Preparation of ZnS and CdS Quantum Dots

Cellulose nanocrystals (CNC) isolated from bleached bagasse pulp were modified with a second-generation isocyanate dendron (G2-dendron) to prepare dendronized cellulose nanocrystals (DCN). Transmission electron microscopy (TEM), elemental analysis for nitrogen, Fourier transform infrared (FTIR) and ¹³C magic angle spinning nuclear magnetic resonance (¹³C MAS NMR) proved occurrence of the modification of cellulose nanocrystals surfaces. The dendronized cellulose nanocrystals were used as templates for formation of ZnS and CdS quantum dots with uniform diameter at low temperature in water. The prepared DCN/QDs were highly soluble in water. TEM images showed that the size of the prepared quantum dots was about 5 nm in diameter. UV-Visible and fluorescence spectroscopy showed absorption and emission at wavelength values lower than that reported for bulk ZnS and CdS.     

Super Absorbent Hydrogel Based on Poly[acrylamide/maleic acid/2-methacryloxy ethyl trimethylammonium chloride]: Synthesis,Characterization and their Application in the Removal of Chromium (VI) from Aqueous Solution

New poly[acrylamide/maleic acid/2-methacryloxy ethyl trimethylammonium chloride], poly[AAm/MA/METAC], super absorbent hydrogels (M1-M4) were prepared via microwave irradiated free radical solution polymerization using different compositions. According to swelling experiments, hydrogel M1 with higher METAC content gave relatively higher swelling percentage compared to other hydrogels. The hydrogel M1 was characterized by FT-IR, TGA, and SEM analysis. The influence of the uptake conditions such as pH, time, adsorbent dose and initial feed concentration on the metal ion binding capacity of hydrogel was also tested. Furthermore, the Langmuir and Freundlich adsorption isotherms were applied and they showed a good fit to the experimental data.     

Novel cellulose esters derived from the levopimaric acid-maleic anhydride adduct: synthesis,characterization, and properties

Synthesis of maleated pimaric acid (MPA) cellulose esters is first reported in this work. Cellulose esterification was performed by reacting microcrystalline cellulose with monoacid chloride of MPA (MPA-Cl) in presence of pyridine as catalyst and reaction medium. The syntheses were started in a heterogeneous solid–liquid reaction medium, but as the reaction advanced, the reaction mass turned into a homogeneous solution. The effects of MPA-Cl/anhydroglucose unit molar ratio, reaction temperature, and reaction duration on the yield and degree of substitution (DS) of cellulose esters (CEs) were investigated. CEs with DS ranging from 2.6 to 2.8 were achieved at molar ratios of 5.5–6.0 after 12–16 h at 118 °C. The purified products were characterized by elemental analysis, IR and ¹³C-NMR spectroscopy, and thermogravimetric analysis. CEs are soluble or partially soluble in usual organic solvents, depending on DS. Transparent films were prepared using CE-cyclohexanone solutions.     

辐射交联制备改性CMC水凝胶的溶胀行为研究

利用丙烯酰胺 (AAm)接枝改性纤维素 ,然后进行羧甲基化反应得到高取代度的丙烯酰胺 羧甲基纤维素钠 (AAm CMC Na) .对该材料进行γ射线辐照制备出新型改性CMC水凝胶 .研究了这种水凝胶的溶胀动力学、交联动力学以及温度、pH值和无机盐浓度对水凝胶溶胀行为的影响 ,并与CMC Na水凝胶进行了比较 .结果表明 ,该水凝胶和CMC Na水凝胶相比 ,优点在于辐照交联所用的剂量下降 ,而且所需的CMC浓度减少 .AAm CMC Na水凝胶的溶胀度随温度升高而增大 ,在pH为 6～ 8范围内达到最大值 ,并随无机盐浓度与吸收剂量增加而下降 ,表现出较好的温度敏感性和pH敏感性 ,可望作为吸水材料和水保持剂     

Reinforcement of Self‐Healing Polyacrylic Acid Hydrogel with Acrylamide Modified Microcrystalline Cellulose†

Self‐healing hydrogel such as polyacrylic acid (PAA) hydrogel has attracted increasing attention based on its promising potential applications. However, it usually suffers from low strength especially as mechanical device. Herein, a commercial microcrystalline cellulose (MCC) was modified with acrylamide to graft polyacrylamide (PAM) chains on the particle surface. The acrylamide‐modified MCC (AM‐MCC) was then dispersed in monomer solution of acrylic acid to prepare composite hydrogel. The mechanical properties of the obtained composite hydrogels and the self‐healed hydrogels were carefully measured by compressive and tensile tests, and by dynamic mechanical analysis. Our results demonstrate that introduction of a small amount of AM‐MCC such as 3 wt% can not only reinforce the original hydrogel and the healed hydrogel markedly, but also improve self‐healing efficiency obviously. The analyses indicate that in addition to the reversible multi‐interactions such as hydrogen bonding and ionic interactions, the entanglements between the PAA chains of the hydrogel matrix and the PAM chains grafted on the MCC particles have also played an important role on the improvement in mechanical performances and the healing ability of the hydrogel. Moreover, the responsiveness to exterior ion has been tested to indicate potential application of the composite hydrogel as self‐healable sensor.     

Macroporous Poly(Acrylamide) Hydrogels: Swelling and Shrinking Behaviors

Macroporous poly(acrylamide) hydrogels have been synthesized by using poly(ethylene glycol) (PEG) with three different molecular weights as the pore‐forming agent. Scanning electron microscope graphs reveal that the macroporous network structure of the hydrogels can be adjusted by applying different molecular weights of PEG during the polymerization reaction. The swelling ratios of the PEG‐modified hydrogels were much higher than those for the same type of hydrogel prepared via conventional method. However, the swelling/deswelling ratios of the PEG‐modified hydrogels were affected slightly by the change in the amount of the PEG. Scanning electron microscopy experiments, together with swelling ratio studies, reveal that the PEG‐modified hydrogels are characterized by an open structure with more pores and higher swelling ratio, but lower mechanical strength, compared the conventional hydrogel. PAAm has potential applications in controlled release of macromolecular active agents.     

Application of Enzyme for Improvement of Acacia APMP Pulping and Refining of Mixed Pulp for Printing Papermaking in Vietnam

This study assesses the influence of commercial enzyme (FibreZyme? LBR) treatment applied to APMP pulp and to the mixture of 55 % Acacia CTMP75 pulp, 30 % soft-wood bleached chemical pulp (LBKP 90 from Chile) and 15 % hard-wood bleached chemical pulp (NPKP 90 from Indonesia). The treatment was conducted at different temperatures, reaction times and enzyme dosages. The APMP and mixed pulp treated with the enzyme showed a significant decrease of refining time to achieve the same refining degree (Schopper–Riegler freeness, °SR) and better mechanical–physical properties due to the development of fibrillation. The fibre morphology difference between before and after treatment was revealed by the microscopic observations performed by a scanning electron microscope (SEM). The SEM analysis showed that the surface of the enzyme-treated fibre had some swelling and fibrillar phenomenon that lead to strong paper properties such as tear index, tensile index and burst index.     

Microstructured polyacrylamide hydrogels made with hydrophobic nanoparticles

Poly(methyl methacrylate) nanosize particles, made by microemulsion polymerization, were dispersed in an acrylamide aqueous solution, which was polymerized in the presence of a cross-linking agent to yield microstructured hydrogels. The kinetics of swelling and the mechanical properties of these hydrogels were investigated as a function of concentration of particles. The microstructured hydrogels exhibit higher equilibrium swelling and larger Young modulus than conventional (that is, without particles) polyacrylamide hydrogel. The morphology of the microstructured hydrogels was examined by transmission electron microscopy.     

Preparation of cellulose nano-crystals through a sequential process of cellulase pretreatment and acid hydrolysis

In this paper, a cellulase pretreatment was studied prior to the acid hydrolysis to decrease the total acid usage during the cellulose nano-crystals (CNC) preparation from a bleached softwood kraft pulp. Cellulase pretreatment facilitates the subsequent acid hydrolysis to produce CNC with similar quality to that of the control, but at a lower sulfuric acid concentration. The underline mechanism is that cellulase pretreatment led to the formation of more carbonyl groups which can be oxidized into carboxyl groups in the subsequent acid hydrolysis, furthermore, more hydroxyl groups are exposed, thus esterification into sulfonic groups can be enhanced. The results showed that with a cellulase dosage of 4.8 u/g (based on dry pulp) in the pretreatment stage, the sulfuric acid concentration can be decreased from 64 to 40 wt% without compromising the quality of resulting CNC particles. Other results from charge properties, Fourier transform infrared spectroscopy (FT-IR) and transmission electron microscopy (TEM) analyses also supported the conclusions.     

Preparation of cellulose and cellulose derivative azo compounds

Wood pulp and cotton linter are the most common sources of cellulose forindustrial use. Methyl cellulose (MC) and cellulose sulfate (CS) were preparedusing bleached wood pulp and cotton linter. Coloured azo compounds were alsoprepared from coupling cellulose, wood pulp, MC and CS with aromatic diazoniumsalt. The presence of electron-releasing or withdrawing substituents affectedthe electrophilic substitution reaction. The produced azo compounds werecharacterized by FT-IR methodology, as well as mass spectrometry, in which thefunctional groups and the ion fragments of the products were analyzed.     

Properties of polystyrene/poly(butyl acrylate) core/shell polymers modified with N‐methylol acrylamide

Polystyrene/poly(butyl acrylate) PS/PBA polymer dispersions with core/shell particles functionalized by N‐methylol acrylamide (N‐MA) were prepared through two‐step emulsion polymerization. The influence of N‐MA situated in shell and/or in core/shell of particles on the crosslinking reaction was studied to relate its mechanical properties and organic solvent resistance of films cast from basic and modified PS/PBA latexes. The changes in the phase arrangement of functionalized and unfunctionalized films after treatment with solvent and annealing were monitored. It was found that at the presence of N‐MA the crosslinking reaction occured already during the polymerization. Films from functionalized dispersions exhibit improved tensile strength and higher resistance against organic solvent.