Microdomain morphology of lamella‐forming diblock copolymer confined in a thin film

We report the self‐consistent field theory (SCFT) of the morphology of lamella‐forming diblock copolymer thin films confined in two horizontal symmetrical/asymmetrical surfaces. The morphological dependences of thin films on the polymer‐surface interactions and confinement, such as film thickness and confinement spatial structure, have been systematically investigated. Mechanisms of the morphological transitions can be understood mainly through the polymer‐surface interactions and confinement entropy, in which the plat confinement surface provides a surface‐induced effect. The confinement is expressed in the form of the ratio D/L₀, here D is film thickness, and L₀ is the period of bulk lamellar‐structure. Much richer morphologies and multiple surface‐induced morphological transitions for the lamella‐forming diblock copolymer thin films are observed, which have not been reported before. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1–10, 2009     

Syntheses of polyolefin‐based stereoregular diblock copolymers for self‐assembled nanostructures

The preparation of polyolefin‐based stereoregular diblock copolymers by postpolymerization of ethenyl‐capped syndiotactic polypropylene‐based propylene/norbornene copolymer (sPP‐based P‐N copolymer) led to the successful generation of a structurally uniform stereoregular diblock copolymer for self‐assembly studies. The ethenyl‐capped prepolymer was prepared by conducting propylene/norbornene copolymerization in the presence of Me₂C(Cp)(Flu)ZrCl₂/MAO. Ozonolysis of ethenyl‐capped sPP‐based P‐N copolymer provided the formyl group end‐capped, end‐functionalized prepolymer with a quantitative functional group conversion ratio. Subsequently, connecting the formyl end‐group of the stereoregular prepolymer by coupling with living anionic polystyrene resulted in the high yield production of stereoregular diblock copolymer (sPP‐based P‐N‐block‐polystyrene), which is difficult to prepare by other methods. The resulting stereoregular diblock copolymer possesses precise chemical architecture to self‐organize into consistent nanostructures as evidenced by transmission electron microscopy and small angle X‐ray scattering. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4843–4856, 2008     

Simulated annealing study of diblock copolymer thin films confined between two homogeneous surfaces.

Thin films of symmetric diblock copolymers confined between two parallel surfaces have been systematically investigated by means of simulated annealing on a simple cubic lattice. The study was carried out for systems with different film thicknesses and surface-polymer interactions. Very regular equilibrium morphologies of lamella are formed in almost all cases. The dependence of lamellar orientations, total energy, chain-conformation entropy, and free energy of the confined films on the film thickness and the strength of surface-polymer interactions has been studied systematically. The influence of packing frustration on morphology is observed and the mechanisms of lamellar orientations are investigated.     

Synthesis and self‐assembly of helical polypeptide‐random coil amphiphilic diblock copolymer

Three amphiphilic rod‐coil diblock copolymers, poly(2‐ethyl‐2‐oxazoline‐b‐γ‐benzyl‐L ‐glutamate) (PEOz‐b‐PBLG), incorporating the same‐length PEOz block length and various lengths of their PBLG blocks, were synthesized through a combining of living cationic and N‐carboxyanhydride (NCA) ring‐opening polymerizations. In the bulk, these block copolymers display thermotropic liquid crystalline behavior. The self‐assembled aggregates that formed from these diblock copolymers in aqueous solution exhibited morphologies that differed from those obtained in α‐helicogenic solvents, that is, solvents in which the PBLG blocks adopt rigid α‐helix conformations. In aqueous solution, the block copolymers self‐assembled into spherical micelles and vesicular aggregates because of their amphiphilic structures. In helicogenic solvents (in this case, toluene and benzyl alcohol), the PEOz‐b‐PBLG copolymers exhibited rod‐coil chain properties, which result in a diverse array of aggregate morphologies (spheres, vesicles, ribbons, and tube nanostructures) and thermoreversible gelation behavior. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3108–3119, 2008     

Practical implementation of order parameter calculation for directed assembly of block copolymer thin films

A computational procedure is presented to quantify the order achieved in assembled block copolymer films when no disruptive defects are present (i.e., dislocations or disclinations). Both simulated and real systems were used to show that sub‐nm variation in the domain position, as well as the corresponding reciprocal lattice vectors, can reduce the accuracy in the quantification of the order of the system. The computational procedure in this work was based on fitting to the measured spatial location of the domain centroids, and incorporated a tolerance factor to account for domain position variation. The procedure was used to analyze the translational and orientational order parameters of block copolymer films assembled on a chemical pattern as well as their corresponding autocorrelation functions. The procedure was applied to a patterned substrate during three stages of a template forming process: an e‐beamed patterned photoresist, the domains of a block copolymer directed to assemble on this pattern, and the underlying structure after lift‐off. Use of the procedure demonstrated that the order of the block copolymer film could be retained in subsequent processing of the underlying template. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Tuning nanoscopic self‐assembly of diblock copolymer blends on a two‐dimensional interface

Spreading amphiphilic diblock copolymers on a two‐dimensional liquid interface has been observed to produce nanoscale features via self‐assembly. Here, we develop a model that incorporates the effects of polymer entanglement and surface diffusion in polymer blends to quantitatively predict the size of experimentally observed structures. Simulations show that different polymers in the blend cooperate to self‐assemble into nanoscale features of varying sizes. Characteristic nanoscopic dimensions can be tuned by adjusting two easily controllable macroscopic quantities: the blend composition and the initial surface concentration. Theoretical predictions are in agreement with experimentally measured feature dimensions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Atomic force microscopy investigation of asymmetric diblock copolymer morphologies in thin films

Microphase separation and the resulting morphology of asymmetric diblock copolymers of poly(ε-caprolactone) (PCL) in thin films have been investigated by atomic force microscopy. Copolymers consisted of a short block of PCL (M_n∼2500-4500 g/mole) and a longer second block of poly(methyl methacrylate) (PMMA), poly(styrene) (PS) or poly(cyclohexene oxide) (PCHO). Tendency for microphase separation above the glass transition temperature of the second block (PMMA, PS or PCHO) resulted in a pitted morphology on the surface of the thin films. This tendency was strongest for PMMA and weakest for PCHO. The presence of up to 54% PMMA homopolymer in PCL-PMMA block copolymer did not prevent the formation of such pitted morphology on the surface. The effect of the chemical structure of the second block and the possible orientations of the block copolymer molecules in thin films are discussed.     

Mechanism and kinetics of ordering in diblock copolymer thin films on chemically nanopatterned substrates

Lamellae forming diblock copolymer domains can be directed to assemble without defects and in registration with chemically nanopatterned substrates. Initially, thin films of the lamellar poly(styrene-b-methyl methacrylate) block copolymer form hexagonally close-packed styrene domains when annealed on chemical nanopatterned striped surfaces. These styrene domains then coalesce to form linear styrene domains that are not fully registered with the underlying chemical surface pattern. Defects coarsen, until defect-free directed assembly is obtained, by breaking linear styrene domains and reforming new structures until registered lamellae have been formed. At all stages in the process, two factors play an important role in the observed degree of registration of the block copolymer domains as a function of annealing time: the interfacial energy between the blocks of the copolymer and the chemically nanopatterned substrate and the commensurability of the bulk repeat period of the block copolymer and the substrate pattern period. Insight into the time-dependent three-dimensional behavior of the block copolymer structures is gained from single chain in mean field simulations. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3444–3459, 2005     

Strain state of poly(N‐isopropylacrylamide) in polystyrene‐b‐poly(N‐isopropylacrylamide) block copolymers and binary blends with polystyrene

Three diblock copolymers of polystyrene‐b‐poly(N‐isopropylacrylamide) (PS‐b‐PNIPAM) were prepared by reversible addition‐fragmentation chain transfer technique (RAFT) with compositions f_PS = 0.84, f_PS = 0.29, and f_PS = 0.33. Block copolymers rich in PNIPAM were blended with polystyrene and its morphological effects were studied. The morphology of thin films was induced by acetone vapor and determined in the dried state by means of TEM. Copolymers with f_PS = 0.84 and f_PS = 0.29 form hexagonally packed cylinder (HPC) morphologies while that with f_PS = 0.33 corresponds to a lamellar structure. In almost all cases where PNIPAM constitutes the continuous phase, a contraction of the PNIPAM blocks with respect to their average unperturbed dimension was observed, contrary to what one expects from the physics of self‐assembly of block copolymers. In contrast, for HPC morphology where PNIPAM is confined in a PS matrix, both blocks are highly extended. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1368–1376     

Mean‐field and fluctuation correction analyses for a diblock copolymer melt exhibiting an immiscibility loop

A study on a diblock copolymer melt that can form certain specific interactions between dissimilar monomers is performed first with a mean‐field approach and then with a fluctuation correction approach. Flory's interaction parameter χ possesses both enthalpic and entropic contributions because of the specific interactions. It is found that not only a lower critical ordering transition but also an immiscibility loop with an upper critical ordering transition can be developed in the copolymer by the presence of the specific interactions and the entropic component in χ. The mean‐field loop phase diagram is shown to feature a typical sequence of microphase transitions upon both heating and cooling with two continuous transition points at a symmetric composition. It is revealed that the fluctuation effects remove both continuous transition points to significantly shrink the loop. The pressure effects on the phase behavior of the copolymer are also discussed. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1889–1896, 2003     

Organic–inorganic hybrid diblock copolymer composed of poly (ε‐caprolactone) and poly(MA POSS): Synthesis and its nanocomposites with epoxy resin

Organic–inorganic hybrid diblock copolymers composed of poly(ε‐caprolactone) and poly(MA POSS) [PCL‐b‐P(MA POSS)] were synthesized via reversible addition‐fragmentation chain transfer polymerization of 3‐methacryloxypropylheptaphenyl polyhedral oligomeric silsesquioxane (MA POSS) with dithiobenzoate‐terminated poly(ε‐caprolactone) as the macromolecular chain transfer agent. The dithiobenzoate‐terminated poly(ε‐caprolactone) (PCL‐CTA) was synthesized via the atom transfer radical reaction of 2‐bromopropionyl‐terminated PCL with bis(thiobenzoyl)disulfide in the presence of the complex of copper (I) bromide with N,N,N′,N″,N″‐pentamethyldiethylenetriamine. The results of molecular weights and polydispersity indicate that the polymerizations were in a controlled fashion. The organic–inorganic diblock copolymer was incorporated into epoxy to afford the organic–inorganic nanocomposites. The nanostructures of the organic–inorganic composites were investigated by means of transmission electron microscopy and dynamic mechanical thermal analysis. Thermogravimetric analysis shows that the organic–inorganic nanocomposites displayed the increased yields of degradation residues compared to the control epoxy. In the organic–inorganic nanocomposites, the inorganic block [viz., P(MA POSS)] had a tendency to enrich at the surface of the materials and the dewettability of surface for the organic–inorganic nanocomposites were improved in terms of the measurement of surface contact angles. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Nickel dithiolene complexes encapsulated in biocompatible amphiphilic diblock copolymer nanoparticles

The goal of this study is to prepare novel hybrid nanoparticles, in the form of micellar nanoparticles in aqueous media, which will combine the properties of the amphiphilic diblock copolymers (such as PEO‐b‐PPhOx and PI‐b‐PEO) with the ones of the nickel 1,2‐dithiolene (1,2‐Ni DT) complexes. The structural and morphological analysis of these nanoparticles have revealed that they can be promising for photodynamic therapy and near‐infrared (NIR) optical imaging due to their size and absorption in NIR. The micellar nanoparticles have been studied not only in aqueous solutions but also under other physiological conditions, that is, PBS and PBS‐FBS buffer solutions. Their solutions are characterized by several methods, including UV–vis spectroscopy, light scattering, and FTIR. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2507–2513     

Brushless and controlled microphase separation of lamellar polystyrene‐b‐polyethylene oxide thin films for block copolymer nanolithography

Creating perpendicular alignment in lamellar block copolymer (BCP) systems has considerable industrial and commercial significance, most importantly for generating nanowire structures in electronic devices. In general, these lamellar systems require careful interface engineering to obtain vertical orientation of the blocks. To avoid the strong preferential adsorption of one block to either the substrate or the polymer/air interface, the surface must be “neutralized” by chemical brushes or external forces, for example, solvent fields. Reported here is a stepwise thermo/solvent annealing process allowing the formation of perpendicular domains of polystyrene‐b‐polyethylene oxide lamellar structures while avoiding brush or other surface modifications. This BCP has a relatively small minimum feature size and can be used to generate substrate patterns for use in fabrication of nanowire electronic device structures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Well‐defined amphiphilic polymethylene‐b‐poly(acrylic acid) diblock copolymers: New synthetic strategy and their self‐assembly

Well‐defined amphiphilic polymethylene‐b‐poly (acrylicacid) diblock copolymers have been synthesized via a new strategy combining polyhomologation and atom transfer radical polymerization (ATRP). Hydroxyl‐terminated polymethylenes (PM‐OH) with different molecular weights and narrow molecular weight distribution are obtained through the polyhomologation of dimethylsulfoxonium methylides following quantitative oxidation via trimethylamine‐N‐oxide dihydrate. Subsequently, polymethylene‐based macroinitiators (PM‐MIs M_n = 1,300 g mol^?1 [M_w/M_n = 1.11] and M_n = 3,300 g mol^?1 [M_w/M_n = 1.04]) are synthesized by transformation of terminal hydroxyl group of PM‐OH to α‐haloester in ～100% conversion. ATRPs of tert‐butyl acrylate (t‐BuA) are then carried out using PM‐MIs as initiator to construct PM‐b‐P(t‐BuA) diblock copolymers with controllable molecular weight (M_n = 8,800–15,800 g mol^?1 M_w/M_n = 1.04–1.09) and different weight ratio of PM/P(t‐BuA) segment (1:1.7–1:11.2). The amphiphilic PM‐b‐PAA diblock copolymers are finally prepared by hydrolysis of PM‐b‐P(t‐BuA) copolymers and their self‐assembly behavior in water is preliminarily investigated via the determination of critical micelle concentrations, dynamic light scattering, and transmission electron microscope (TEM). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Surface and bulk ordering in thin films of a symmetrical diblock copolymer

Amphiphilic diblock copolymers have the ability to adapt their surface's molecular composition to the hydrophilicity of their environment. In the case of about equal volume fractions of the two polymer blocks, the bulk of these polymers is known to develop a laminar ordering. We report here our investigation of the relationship between bulk ordering and surface morphology/chemical composition in thin films of such an amphiphilic diblock copolymer. Upon annealing in vacuum, the expected lamella ordering in the bulk of the film is observed and we find the morphology of the film surface to be defined by the thickness of the as‐deposited film: If the as‐deposited thickness matches the height of a lamella stack, then the film exhibits a smooth surface. Otherwise, an incomplete lamella forms at the film surface. We show that the coverage of this incomplete layer can be quantified by X‐ray reflectivity. To establish the lamella ordering in the bulk, the film needs to be annealed above the glass temperature of the two blocks. Molecular segregation at the film surface, however, is already occurring at temperatures well below the glass temperature of the two blocks. This indicates that below the glass temperature of the blocks the bulk of the thin film is “frozen,” whereas the polymer chains composing the surface lamella have an increased mobility. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys., 2013 , 51, 1282–1287     

Controlled co‐solvent vapor annealing and the importance of quenching conditions in thin‐film block copolymer self‐assembly

A controlled co‐solvent vapor annealing system was designed and constructed to investigate the effects of solvent vapor activity during the rapid ambient quenching process on the morphology of a cylinder‐forming poly(styrene)‐b‐poly (ethylene oxide) (PS‐PEO) annealed in toluene and water vapor. A phase transformation from cylinders in the bulk to close‐packed spheres in swollen thin films occurred, which was reversed upon quenching with dry nitrogen. Quenching with humidified nitrogen preserved the spherical morphology but could significantly alter domain spacing and reduce long‐range order in the dried films under some circumstances. Specifically, long‐range order in the quenched films was found to decrease as the quenching humidity decreased from the humidity used during annealing, and the best long‐range order was obtained when the humidity remained consistent throughout both annealing and quenching. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1125–1130     

Behaviors of self‐assembled diblock copolymer with pendant photosensitive azobenzene segments

A novel monomer, ethyl 4‐[4‐(11‐methacryloyloxyundecyloxy)phenyl azobenzoyl‐oxyl] benzoate, containing a photoisomerizable N?N group was synthesized. The monomer was further diblock copolymerized with methyl methacrylate. Amphiphilic diblock copolymer poly(methyl methacrylate‐block‐ethyl 4‐[4‐(11‐methacryloyloxyundecyloxy)phenyl azobenzoyl‐oxyl] benzoate ( PMMA ‐ b ‐ PAzoMA ) was synthesized using atom transfer radical polymerization. The reverse micelles with spherical construction were obtained with 2 wt % of the diblock copolymer in a THF/H₂O mixture of 1:2. Under alternating UV and visible light illumination, reversible changes in micellar structure between sphere and rod‐like particles took place as a result of the reversible E‐Z photoisomerization of azobenzene segments in PMMA ‐ b ‐ PAzoMA . Microphase separation of the amphiphilic diblock copolymer in thin films was achieved through thermal and solvent aligning methods. The microphases of the annealed thin films were investigated using atom force microscopy topology and scanning electron microscopy analyses. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1142–1148, 2010     

Water‐soluble top coats for orientation control of liquid crystal‐containing block copolymer films

An easily removable, water‐soluble top coat of polyvinylpyrrolidone (PVP) is used to control the orientation of microdomains in a liquid crystalline block copolymer (LC BCP, poly(ethylene oxide)‐block‐poly(6‐(4‐methoxy‐azobenzene‐4′‐butyl) hexyl methacrylate)). The corresponding LC homopolymer is also investigated for comparison. Atomic force microscopy is used to determine the orientation of the cylindrical microdomains of the LC BCP. UV–vis spectroscopy and grazing incidence wide‐angle X‐ray scattering are used to determine the orientation of the LC mesogens in the LC homopolymer and the LC BCP films annealed both with and without a top coat. Once the LC BCP morphology is self‐assembled, the PVP top coat layer can be easily removed with water or alcohol. The facile removal of the top coat improves the processability of BCPs in technological applications, and enables direct investigation of the BCP morphology in scientific studies. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1569–1574     

Facile synthesis and responsive behavior of PDMS‐b‐PEG diblock copolymer brushes via photoinitiated “thiol‐ene” click reaction

We present herein a mild and rapid method to create diblock copolymer brushes on a silicon surface via photoinitiated “thiol‐ene” click reaction. The silicon surface was modified with 3‐mercaptopropyltrimethoxysilane (MPTMS) self‐assembled monolayer. Then, a mixture of divinyl‐terminated polydimethylsiloxane (PDMS) and photoinitiator was spin‐coated on the MPTMS surface and exposed to UV‐light. Thereafter, a mixture of thiol‐terminated polyethylene glycol (PEG) and photoinitiator were spin‐coated on the vinyl‐terminated PDMS‐treated surface, and the sequent photopolymerization was carried out under UV‐irradiation. The MPTMS, PDMS, and PEG layers were carefully identified by X‐ray photoelectron spectroscopy, atomic force microscopy, ellipsometry, and water contact angle measurements. The thickness of the polydimethylsiloxane‐block‐poly(ethylene glycol) (PDMS‐b‐PEG) diblock copolymer brush could be controlled by the irradiation time. The responsive behavior of diblock copolymer brushes treated in different solvents was also discussed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

β‐cyclodextrin‐based polymeric nano‐receptor: the self‐assembly of cyclodextrin‐appended comb‐copolymer

Well‐defined β‐cyclodextrin (β‐CD)‐appended biocompatible comb‐copolymer ethyl cellulose‐graft‐poly (ε‐caprolactone) (EC‐g‐PCL) was synthesized via the combination of ring‐opening polymerization (ROP) and click chemistry. The resulting products were characterized by ¹H NMR, FT‐IR spectroscopy, and GPC. The synthesized comb‐copolymer could assemble to micelles, with the surface covered by β‐CD. The inclusion with ferrocene derivation was investigated by cyclic voltammetric (CV) experiments, which indicated the potential application of the micelles as nano‐receptors for molecule recognization and controlled drug release. Copyright © 2011 John Wiley & Sons, Ltd.