Syn/anti isomerization of 2,4-dinitrophenylhydrazones in the determination of airborne unsymmetrical aldehydes and ketones using 2,4-dinitrophenylhydrazine derivation

Aldehydes and ketones readily react with 2,4-dinitrophenylhydrazine (2,4-DNPH) to form the corresponding hydrazones. This reaction has been frequently used for the quantification of airborne carbonyl compounds. Since unsymmetrical aldehydes and ketones are known to form isomeric 2,4-dinitrophenylhydrazones (syn/ anti-isomers), the influence of isomerization on the practicability and accuracy of the 2,4-DNPH-method using 2,4-dinitrophenylhydrazine-coated solid sorbent samplers has been studied with three ketones (methyl ethyl ketone (MEK), methyl isopropyl ketone (MIPK), and methyl isobutyl ketone (MIBK)). With all three ketones the reaction with 2,4-DNPH resulted in mixtures of the isomeric hydrazones which were separated by HPLC and GC and identified by mass spectroscopy and ¹H nuclear magnetic resonance spectroscopy. The isomers show similar chromatographic behaviour in HPLC as well as in GC, thus leading to problems in quantification and interpretation of chromatographic results.     

Determination of linear aliphatic aldehydes in heavy metal containing waters by high-performance liquid chromatography using 2,4-dinitrophenylhydrazine derivatization

A simple and sensitive method is described for the determination of picomolar amounts of C₁–C₉ linear aliphatic aldehydes in waters containing heavy metal ions. In this method, aldehydes were first derivatized with 2,4-dinitrophenylhydrazine (DNPH) at optimized pH 1.8 for 30 min and analyzed by HPLC with UV detector at 365 nm. Factors affecting the derivatization reaction of aldehydes and DNPH were investigated. Cupric ion, an example of heavy metals, is a common oxidative reagent, which may oxidize DNPH and greatly interfere with the determination of aldehydes. EDTA was used to effectively mask the interferences by heavy metal ions. The method detection limits for direct injection of derivatized most aldehydes except formaldehyde were of the order of 7–28 nM. The detection limit can be further lowered by using off-line C₁₈ adsorption cartridge enrichment. The recoveries of C₁–C₉ aldehydes were 93–115% with a relative standard deviation of 3.6–8.1% at the 0.1 μM level for aldehydes. The HPLC–DNPH method has been applied for determining aldehyde photoproducts from Cu(II)–amino acid complex systems.     

Effect of the micellar surfactant nanoreactors on the reactions of 2,4-dinitrophenylhydrazine with some aldehydes

By thermogravimetry, the IR and electronic spectroscopy physicochemical characteristics of systems including aromatic aldehydes, 2,4-dinitrophenylhydrazine, and a surfactant were investigated. Selective solubilization effect of the cationic surfactant (cetylpyridinium chloride) micelles on the aci-form of hydrazone arising in the alkaline medium was found. The universal character of solubilization by the cationic surfactant micelles in the aromatic aldehyde—2,4-dinitrophenylhydrazine systems was shown by an example of the benzaldehyde derivatives with substituents of different nature. This effect leads to the increase in solubility of the reaction products and the aggregative stability of solutions.     

Kinetic analysis of isothermal decomposition of 2,4-dinitrophenylhydrazine using differential scanning calorimetry

Differential scanning calorimetry was used to study the thermal decomposition of 2,4-dinitrophenylhydrazine (DNPH) in isothermal regime. The DSC curves were carried out at several constant temperatures lower than the melting temperature. The standard isoconversional analysis of the obtained curves suggests an autocatalytic decomposition mechanism. This mechanism is also supported by the temperature dependence of the observed induction periods.     

Evaluation of silica gel cartridges coated in situ with acidified 2,4-dinitrophenylhydrazine for sampling aldehydes and ketones in air

A procedure for coating in situ silica gel in prepacked cartridges with 2,4-dinitrophenylhydrazine (DNPH) acidified with hydrochloric acid is described. The coated cartridge was compared with a validated DNPH impinger method for sampling organic carbonyl compounds (aldehydes and ketones) in diluted automotive exhaust emissions and in ambient air for subsequent analysis of the DNPH derivatives by high performance liquid chromatography. Qualitative and quantitative data are presented that show that the two sampling devices are equivalent. The coated cartridge is ideal for long-term sampling of carbonyls at sub to low parts-per-billion level in ambient air or for short-term sampling of carbonyls at low ppb to parts-per-million level in diluted automotive exhaust emissions. An unknown degradation product of acrolein has been tentatively identified as x-acrolein. The disappearance of acrolein in the analytical sample matrix correlates quantitatively almost on a mole for mole basis with the growth of x-acrolein. The sum of the concentration of acrolein and x-acrolein appears to be invariant with time.     

Electroanalysis and determination of acetaldehyde in fuel ethanol using the reaction with 2,4-dinitrophenylhydrazine

The voltammetric reduction of acetaldehyde was studied in 0.1 M LiOH: LiCl (60: 40 v/v). Well-defined waves can be seen at −1.77 and −1.60 V with the use of hanging mercury and glassy carbon electrodes. Acetaldehyde was shown to react at room temperature with the 2,4-dinitrophenylhydrazine and the product exhibited a differential pulse voltammetric peak at −0.90 V, which was well separated from the peaks of the derivative. This allowed the indirect determination of acetaldehyde in the presence of 0.1 M ethanol/tetrabutylammonium perchlorate after 10 min of reaction. Calibration graphs were obtained for 1.00 × 10⁻⁶−1.00 × 10⁻⁴ M of acetaldehyde. The detection limit is 8.14 × 10⁻⁷ M. The method has been applied satisfactorily to the determination of total aldehyde in fuel ethanol samples without any pretreatment. The text was submitted by the authors in English.     

Reaction of 3,4,6-trioxoalkanoic acid esters with 2,4-dinitrophenylhydrazine

Methyl 3,4,6-trioxoalkanoates (3,4-dihydroxy-6-oxo-2,4-alkadienoates) reacted with 2,4-dinitrophenylhydrazine to give methyl 3,6-bis[(2,4-dinitrophenyl)hydrazinylidene]-4-oxoalkanoates or methyl {5-alkyl-2-hydroxy-1-(2,4-dinitroanilino)-3-oxo-2,3-dihydro-1H-pyrrol-2-yl }acetates. Alkyl 3,6-bis[(2,4-dinitrophenyl) hydrazinylidene]-4-oxoalkanoates were also synthesized by reaction of disodium 1-alkoxy-1,6-dioxoalka-2,4-diene-3,4-diolates with 2,4-dinitrophenylhydrazine.     

Colorimetric tools for solid-phase organic synthesis

One of the unresolved problems of solid-phase organic synthesis (SPOS) is the availability of general and rapid methods to monitor the transformation of functional groups present in molecules supported on insoluble supports. Color tests, far from providing the ultimate solution, may help in detection (and sometimes in quantification) of different functional groups. In this short review, we have collected most of the methods available and applied in SPOS with an Experimental Section that describes the procedure we have successfully applied to bead analyses in our laboratories.     

Determination of aldehydes in drinking water using pentafluorobenzylhydroxylamine derivatization and solid-phase microextraction

A headspace solid-phase microextraction (HS-SPME) procedure followed by gas chromatography and electron capture detection (GC-ECD) has been developed for the determination of aldehydes in drinking water samples at microg/l concentrations. A previous derivatization with o-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine hydrochloride (PFBHA) was performed due to the high polarity and instability of these ozonation by-products. Several SPME coatings were tested and the divinylbenzene-polydimethylsiloxane (DVB-PDMS) coating in being the most suitable for the determination of these analytes. Experimental SPME parameters such as selection of coating, sample volume, addition of salt, extraction time and temperature of desorption were studied. Analytical parameters such as precision, linearity and detection limits were also determined. HS-SPME was compared to liquid-liquid microextraction (proposed in US Environmental Protection Agency Method 556) by analyzing spiked water samples; a good agreement between results obtained with both techniques was observed. Finally, aldehydes formed at the Barcelona water treatment plant (N.E. Spain) were determined at levels of 0.1-0.5 microg/l. As a conclusion, HS-SPME is a powerful tool for determining ozonation by-products in treated water.     

Development and validation of a spectrophotometric method for the determination of macrolide antibiotics by using 2,4-dinitrophenylhydrazine

A simple, novel, sensitive, and specific spectrophotometric method was developed and validated for the determination of azithromycin (AZ), clarithromycin (CLA), and roxithromycin (ROX) in bulk powders and their dosage forms. The proposed method was based on the interaction of any of the cited drugs with 2,4-dinitrophenylhydrazine in the presence of an acid catalyst, followed by treatment with a methanolic solution of potassium hydroxide; an intensely colored chromogen was formed that was measured in dimethylformamide, as the diluting solvent, at 542-545, 523-526, and 539-542 nm for AZ, CLA, and ROX, respectively. All variables affecting the development of the measured chromogens were studied and optimized. Beer's law was obeyed in the concentration ranges of 5-40, 5-35, and 5-35 microg/mL for AZ, CLA, and ROX, respectively, with good correlation coefficients (0.9991-0.9999). The limits of detection for this method ranged from 0.77 to 1.47 microg/mL, and the relative standard deviations were 1.24-1.8%. The proposed method was applied successfully to the determination of the 3 drugs in pure bulk form, tablets, and suspensions without interference from commonly encountered additives. The results compared favorably with those of a previously reported method. The mechanism of the reaction was also studied.     

Reaction of 3,4-dioxohexane-1,6-dioic acid esters with 2,4-dinitrophenylhydrazine

Reaction was studied of 3,4-dihydroxyhexa-2,4-diene-1,6-dioic acid esters with 2,4-dinitrophenylhydrazine that led to the formation of esters of (3E)-3-[2-(2,4-dinitrophenyl)-hydrazinylidene]-4-oxohexane-1,6-dioic and (3E,4E)-3,4-bis[2-(2,4-dinitrophenyl)hydrazinylidene]-hexane-1,6-dioic acids. The structural features of compounds synthesized were established from the data of IR and NMR spectra and X-ray diffraction (XRD) analysis.     

Efficient solvent-free synthesis of thiazolidin-4-ones from phenylhydrazine and 2,4-dinitrophenylhydrazine

An efficient solvent-free synthesis of thiazolidinones from reaction of mercaptoacetic acid, aldehydes (benzaldehyde and valeraldehyde) or ketones (cyclopentanone and cyclohexanone), and hydrazines (phenylhydrazine and 2,4-dinitrophenylhydrazine) is reported. The compounds were generally characterized by spectroscopic techniques and specifically for 2-cyclohexanyl-3-(N-phenyl)-1,3-thiazolidin-4-one by X-ray crystallography.     

Traceless solid-phase synthesis of 2,4-diaminoquinazolines

[reaction: see text] The solid-phase synthesis of 2,4-diaminoquinazolines is presented. The chemistry involves the sequential condensation of 2-aminobenzonitriles and amines starting from an acyl isothiocyanate resin via a traceless cleavage and cyclization. The alpha-1 antagonist prazosin was synthesized, as well as several other examples, in good yields and purity.     

Quantification of 2,4-dinitrophenyl-hydrazones of low molecular mass aldehydes and ketones using HPLC

Summary This study was undertaken to evaluate the HPLC separation and quantification of several low molecular mass aldehydes and ketones, which may be produced during combustion in alcohol-fueled automobiles, by means of their dinitrophenylhydrazone derivatives. Stationary phases (ODS), mobile phase components (acetonitrile or methanol with water) and detection sensitivity at 254 and 365 nm were evaluated. Separation of eight dinitrophenylhydrazones could be achieved in approximately 20 minutes using a Zorbax ODS or a Supelcosil LC-PAH column with a MeOH:H₂O (7525 v/v) mobile phase. Complete separations were not obtained with either a Nova-Pack C-18 or an Ultrasphere ODS column. The use of acetonitrile-water mobile phases produces poorer resolution at all compositions tested. Quantification of the compounds by several methods was compared, with the lowest standard deviations being seen with the external than 1.5 pmol for each of the 2,4-dinitrophenylhydrazones in the test solution. The method is being applied to the analysis of aldehydes and ketones in the exhaust of automobile engines fueled by ethanolgasoline mixtures.Presented at the 19th ISC. Aix-en-Provence, France, September 13–18, 1992.     

Improvement of 2,4-dinitrophenylhydrazine derivatization method for carbon isotope analysis of atmospheric acetone

Through simulation experiments of atmospheric sampling, a method via 2,4-dinitrophenylhydrazine (DNPH) derivatization was developed to measure the carbon isotopic composition of atmospheric acetone. Using acetone and a DNPH reagent of known carbon isotopic compositions, the simulation experiments were performed to show that no carbon isotope fractionation occurred during the processes: the differences between the predicted and measured data of acetone-DNPH derivatives were all less than 0.5 per thousand. The results permitted the calculation of the carbon isotopic compositions of atmospheric acetone using a mass balance equation. In this method, the atmospheric acetone was collected by a DNPH-coated silica cartridge, washed out as acetone-DNPH derivatives, and then analyzed by gas chromatography/combustion/isotope ratio mass spectrometry (GC/C/IRMS). Using this method, the first available delta13C data of atmospheric acetone are presented.     

Development of a compound-specific isotope analysis method for acetone via 2,4-dinitrophenylhydrazine derivatization

A novel method has been developed for compound-specific isotope analysis for acetone via DNPH (2,4-dinitrophenylhydrazine) derivatization together with combined gas chromatography/combustion/isotope ratio mass spectrometry (GC/C/IRMS). Acetone reagents were used to assess delta13C fractionation during the DNPH derivatization process. Reduplicate delta13C analyses were designed to evaluate the reproducibility of the derivatization, with an average error (1 standard deviation) of 0.17 +/- 0.05 per thousand, and average analytical error of 0.28 +/- 0.09 per thousand. The derivatization process introduces no isotopic fractionation for acetone (the average difference between the predicted and analytical delta13C values was 0.09 +/- 0.20 per thousand, within the precision limits of the GC/C/IRMS measurements), which permits computation of the delta13C values for the original underivatized acetone through a mass balance equation. Together with further studies of the carbon isotopic effect during the atmospheric acetone-sampling procedure, it will be possible to use DNPH derivatization for carbon isotope analysis of atmospheric acetone.