Determination of pesticides in water samples from the Wieprz-krzna Canal in the Leczyńsko-Włodawskie Lake District of southeastern Poland by thin-layer chromatography with diode array scanning and high-performance column liquid chromatography with diode array detection

High-performance thin-layer chromatography with diode array scanning (TLC-DAD) and high-performance column liquid chromatography with a diode array detector (HPLC-DAD) were used to screen water samples for pesticides. Atrazine, clofentezine, chlorfenvinphos, hexaflumuron, terbuthylazine, lenacyl, neburon, bitertanol, and metamitron were enriched from canal water samples by solid-phase extraction (SPE) on octadecyl silane (C18)/styrene-divinylbenzene-1, C18, C18 Polar Plus, and cyanopropyl (CN) cartridges. Recovery rates were high for all extraction materials except CN, for which values for all pesticides were lower. SPE was used for both preconcentration and fractionation of the analytes. Analytes were eluted by means of methanol and dichloromethane. Methanol eluates were analyzed by HPLC-DAD and dichloromethane eluates by TLC-DAD. The method was validated for precision, repeatability, and accuracy. Calibration graphs were linear between 0.1 and 50.0 microg/mL for all pesticides, and correlation coefficient (r) values were between 0.9994 and 1.000 as determined by HPLC-DAD. Calibration graphs were linear between 0.1 and 1.5 microg/spot for all pesticides, and r values were between 0.9899 and 0.9987 as determined by TLC-DAD. The limit of detection was between 0.04 and 0.23 microg/spot for TLC-DAD and 0.02 and 0.45 microg/mL for HPLC-DAD.     

Application of HPLC and TLC with diode array detection after SPE to the determination of pesticides in water samples from the Zemborzycki Reservoir (Lublin, southeastern Poland)

The application of TLC with a diode array detector (TLC-DAD) and HPLC-DAD after SPE for identification and quantitative analysis of pesticides in water samples is demonstrated. The procedures described for the determination of compounds are inexpensive and can be applied to routine analysis of analytes in water samples after preliminary cleanup and concentration by SPE. Average recoveries for four different cartridges and three solvents by the proposed HPLC-DAD method after SPE also are presented. The efficiency of the SPE procedure was evaluated using real water samples from the Zemborzycki Reservoir, near Lublin, southeastern Poland. The method was validated for precision, repeatability, and accuracy.     

Determination of analytes in medical herbs extracts by SPE coupled with two-dimensional planar chromatography in combination with diode array scanning densitometry and HPLC-diode array detector

The purpose of this study is to demonstrate an application of 2-D high-performance planar chromatography-diode array detector (DAD) and HPLC-DAD after solid-phase extraction (SPE) for identification and quantitative analysis of pesticides (isoproturon, aziprotryne, hexazinone, flufenoxuron, methabenzthiazuron, procymidone, and α-cypermethrin) in Melissa officinalis L. (Labiatae) samples. The procedure described for the determination of compounds is inexpensive and can be applied to routine analysis of analytes in medical herbs' samples after preliminary cleanup and concentration by SPE. Average recoveries on C18 SPE cartridges of pesticides eluted with 5 mL tetrahydrofuran by the proposed HPLC-DAD method, before and after 2-D-high-performance planar chromatography separation of analytes from M. officinalis L. samples spiked with pesticide at a concentration level of 10 μg/g in plant material are presented. Method validation parameters for the quantification of pesticides by the proposed HPLC-DAD after SPE method are also presented.     

Poly(methyloctylsiloxane) immobilized on silica as a sorbent for solid-phase extraction of some pesticides

A laboratory-made sorbent for solid-phase extraction (SPE) was obtained by thermal immobilization of poly(methyloctylsiloxane) (PMOS) onto silica. Cartridges packed with the new sorbent were used for the simultaneous determination of imazethapyr, nicosulfuron, diuron, linuron and chlorimuron-ethyl in water. These pesticides were separated and quantified using high-performance liquid chromatography with diode array detection (HPLC-DAD). The recoveries achieved with the laboratory-made PMOS cartridges were compared with those of some commercially available silica-based and polymer-based cartridges having C18, C8 and NH(2) pendant groups. Method validation using the laboratory-made sorbent was performed for the five pesticides at three fortifications levels (1x, 2x and 10x the limit of quantification of each pesticide). The laboratory-made PMOS cartridge has low cost preparation and showed good recoveries (72-111%) for all pesticides. Repeatability and intermediate precision were lower than 15%. Its performance was similar or even better, in some cases, than those of the commercial cartridges.     

Determination of melamine in pet food by enzyme immunoassay, high-performance liquid chromatography with diode array detection, and ultra-performance liquid chromatography with tandem mass spectrometry

Melamine in pet food (fortified or originally contaminated) was determined by enzyme immunoassay (EIA), high-performance liquid chromatography with diode array detection (HPLC-DAD), and ultra-performance liquid chromatography with tandem mass spectrometry (UPLC-MS/MS). The limits of detection (LOD) for EIA and HPLC-DAD were 0.02 and 0.1 microg/mL, respectively. The linear ranges of the calibration curves for EIA and HPLC-DAD were 0.02-0.5 and 0.1-500 microg/mL, respectively. The coefficient of determinations (r2) of the standard curves for EIA and HPLC were 0.9991 and 0.9999, respectively. Coefficient of variations from both inter- and intra-assay were <9.31%, and recovery range for all concentrations was between 71 and 105%. The r2 values between the EIA and HPLC-DAD methods for melamine analysis of the fortified and originally contaminated samples were 0.9973 and 0.9885. The r2 values for UPLC-MS/MS with HPLC-DAD and with EIA were 0.9566 and 0.9489, respectively.     

Rapid analysis of triazolopyrimidine sulfoanilide herbicides in waters and soils by high-performance liquid chromatography with UV detection using a C18 monolithic column

In this work, the simultaneous analysis of five triazolopyrimidine sulfoanilide herbicides (flumetsulam, florasulam, metosulam, cloransulam-methyl, and diclosulam) by HPLC using UV detection and a C18 monolithic column is proposed. The mobile phase which was composed of ACN, water, and formic acid was pumped at a high flow rate (5 mmL/min) providing an analysis time of all the compounds in less than 2.3 min. The LODs were in the low microg/L range (i.e. between 60 microg/L for flumetsulam and 90 microg/L for florasulam) and the calibration curves showed good linearity (R2 > 0.9949). The method was applied to the analysis of these compounds in spiked mineral and tap waters and soils after an SPE preconcentration procedure using C18 cartridges. Mean recovery values ranged between 35 and 110% for water samples providing LODs of the whole procedure in the low ng/L level, down to 280 ng/L, and between 77 and 92% for soil samples with LODs down to 9.38 microg/kg. This is the first time that this family of pesticides is simultaneously analyzed in both types of samples by HPLC and also using a monolithic column.     

Determination of 4-methylpiperaine-1-carbodithioc acid 3-cyano-3,3-diphenylpropyl ester hydrochloride in rats' plasma by online-SPE-HPLC-DAD: application to a pharmacokinetic study

A specific, simple, and fast online-solid-phase extraction-high performance liquid chromatography-diode array detector (SPE-HPLC-DAD) method was developed and validated to quantify 4-methylpiperaine-1-carbodithioc acid 3-cyano-3,3-diphenylpropyl ester hydrochloride (TM208) in small volume samples of rats' plasma for the first time. In this method, the 50-μL plasma sample was taken to perform protein precipitation with 75 μL methanol, and then 50 μL supernatant containing the target analytes was injected and concentrated automatically in a C18 solid-phase extraction (SPE) cartridge. After that the sample was separated on a C18 RP analytical column and analyzed by DAD. The run cycle time is 6.0 min for each sample, and the calibration curve over the range of 0.03 to 25.00 μg/mL has a good linear relationship (r > 0.9998). The recoveries of the quality control samples were all greater than 90%. The limit of detection and the lowest limit of quantification were 0.01 and 0.03 μg/mL, respectively. Finally, this method was successfully applied to a pharmacokinetic study of TM208 in rats.     

高效液相色谱法同时测定食品中6种对羟基苯甲酸酯

建立了同时检测食品中6种对羟基苯甲酸酯的高效液相色谱-二极管阵列检测器( HPLC-DAD)定量分析方法.样品用乙腈提取,经LC-C18固相萃取柱净化,采用Agilent C18色谱柱分离,甲醇/水溶液梯度洗脱,二极管阵列检测器检测,外标法定量.结果表明:6种对羟基苯甲酸酯在1.0～500.0 mg/L范围内线性关系良好(r≥0.9997);检出限为0.0016～0.0081 mg/L(S/N=3);6种对羟基苯甲酸酯各添加水平在经表面处理的新鲜蔬菜、水果、醋、碳酸饮料及牛奶,食品馅料中的回收率为85.1％～95.4％;相对标准偏差为3.6％～10.9％.     

Development and validation of a solid-phase extraction method coupled to high-performance liquid chromatography with ultraviolet-diode array detection for the determination of sulfonylurea herbicide residues in bovine milk samples

This study proposes a fast, simple and sensitive liquid chromatography diode array detector (LC/UV-DAD)-based method for the simultaneous determination of eight sulfonylurea herbicides (bensulfuron methyl, chlorsulfuron, metsulfuron methyl, primisulfuron methyl, rimsulfuron, thifensulfuron methyl, triasulfuron and tribenuron methyl) in bovine whole milk at concentrations lower than the default limit of 0.01 mg kg(-1) allowed by current legislation (Regulation EC/396/2005 and following Annexes). An effective one-step solid phase extraction (SPE) and clean up procedure was defined with use of Chem Elut cartridges, providing good recoveries for all the analytes tested and with no matrix effects affecting method accuracy. Separation of herbicides was obtained on a C(18) column by acetonitrile- water gradient elution. Method validation has been performed according to European Commission Decision 2002/657/EC criteria, in terms of linearity, recovery, precision, specificity, decision limit (CC(α)) and detection capability (CC(β)). Typical recoveries ranged between 78.4% and 99.7%, at the maximum residue limits (MRLs) levels established by Regulation EC/396/2005, with relative standard deviations (RSD) no larger than 10%.     

HPLC method for the determination and pharmacokinetic studies on geniposide in rat serum after oral administration of traditional Chinese medicinal preparation Yin-Zhi-Ku decoction

A new HPLC method for the determination of geniposide in rat serum with solid-phase extraction (SPE) for preconcentration is described. Geniposide and an internal standard (paeoniflorin) were extracted from serum by SPE using C18 cartridges. Analysis of the extract was then performed on a reversed-phase C18 column using acetonitrile-water (16:84, v/v) as the eluting solvent system, and UV detection at 238 nm was used to measure the analyte with a limit of quantitation about 0.1 microg/mL. The calibration curve for geniposide was linear (r = 0.9993) in the concentration range 0.1-16.0 microg/mL. The intra- and inter-day precision of the geniposide were determined and their RSD did not exceed 10%. The validated method has been successfully applied for pharmacokinetic studies of geniposide from rat serum after oral administration of Yin-Zhi-Ku decoction.     

Methodical approach for the use of GC-TOF MS for screening and confirmation of organic pollutants in environmental water

The potential of gas chromatography coupled to time-of-flight mass spectrometry (GC-TOF MS) for the screening of organic pollutants in water was explored. After a conventional SPE step with C(18) cartridges, the comparison of spectra with available libraries together with an evaluation of the mass accuracy was the first approach used for the screening and confirmation of target analytes. However, at low analyte concentrations (i.e. below 0.1 microg/l), this procedure was not feasible and the use of the application manager TargetLynx was evaluated. This application allows the selection of up to five representative ions per analyte, measured with high mass accuracy, and their intensity ratio evaluation. Ion selection, extraction mass window and concentration levels were found to be the critical parameters. The reference compound used as 'lock mass' was also found to affect to the quality of information obtained in some particular cases.Full spectral acquisition data generated by the TOF MS analyzer allowed investigation of the presence of several analytes in samples in a post-target style, without the need of reanalyze the water samples.Finally, a methodical approach was established for the reliable screening and confirmation of organic pollutants (PAHs, pesticides, octyl/nonyl phenols) in real-world samples, which led to satisfactory results of approximately 0.1 microg/l.     

Determination of enrofloxacin and its metabolite ciprofloxacin in goat milk by high-performance liquid chromatography with diode-array detection. Optimization and validation

A high-performance liquid chromatography-diode array detection method (HPLC-DAD) combined with liquid chromatography-mass spectrometry was developed for the determination of enrofloxacin and its metabolite ciprofloxacin in goat milk. The HPLC-DAD method validation was compliant with the "DG SANCO 1805/2000" European regulation. The residues were extracted from milk with phosphate buffer, purified on a C18 Speedisk cartridge SPE (Baker) and then analysed using HPLC-DAD set at 277 nm. The decision limit (CCa) calculated by spiking samples at 100 microg/kg with both analytes, taking into account the maximum residue limit (MRL) of 100 microg/kg established by the European Union for the sum of enrofloxacin and its metabolite ciprofloxacin in milk, was 105.3 microg/kg for enrofloxacin and 105.5 microg/kg for ciprofloxacin. The detection capability (CCbeta) was 110.7 and 110.9 microg/kg for enrofloxacin and ciprofloxacin, respectively. The mean recoveries of the method, calculated by spiking samples at 50, 100 and 150 microg/kg were 84% for enrofloxacin and 88% for ciprofloxacin. The limit of quantification was 20 microg/kg for both analytes. The HPLC-DAD validated method was successfully applied for the first time in goats milk, and proved to be suitable for the sensitive and accurate quantification and confirmation analysis of enrofloxacin and ciprofloxacin for regulatory purposes.     

Determination of pesticides in water samples by solid phase extraction and gas chromatography tandem mass spectrometry

A multiresidue method for the determination of more than 80 pesticides in water has been developed and validated. The proposed method is based on SPE followed by GC coupled to MS/MS. Different variables affecting SPE procedure, such as cartridges, sample volume and solvents were studied, and mass spectrometric conditions were optimised in order to increase selectivity and sensitivity. Calibration curves were linear over the range of 0.03-0.5 microg/L. Recoveries were in the range of 70-110% and repeatability was below 20% for the lowest calibration point. LODs ranged from 0.001 to 0.025 microg/L and LOQs from 0.003 to 0.076 microg/L. Finally, the method was successfully applied to the analysis of water samples from southeast of Spain.     

Automated trace level determination of glyphosate and aminomethyl phosphonic acid in water by on-line anion-exchange solid-phase extraction followed by cation-exchange liquid chromatography and post-column derivatization.

An automated method based on the on-line coupling of anion-exchange solid-phase extraction (SPE) and cation-exchange liquid chromatography followed by post-column derivatization and fluorescence detection has been developed for the trace level determination of glyphosate and its primary conversion product aminomethyl phosphonic acid (AMPA) in water. PRP-X100 poly(styrene-divinylbenzene)-trimethylammonium anion-exchange cartridges (20 x 2 mm, 10 microm) were selected for the SPE of glyphosate and AMPA. The ionic compounds present in the samples strongly influenced the extraction of both analytes; however, when an on-line ion-exchange clean-up step was introduced before sample SPE, the problem was largely solved. By processing 100-ml samples detection limits better than 0.02 microg/l for glyphosate and 0.1 microg/l for AMPA were achieved in river water. Both analytes were unstable in solution and the approach of storing samples on the PRP-X100 SPE cartridges was evaluated for a period of 1 month under three different storage conditions (deep freeze, refrigeration and 20 degrees C).     

Development and validation of an HPLC confirmatory method for residue analysis of ten quinolones in tissues of various food-producing animals, according to the European Union Decision 2002/657/EC

The aim of this work was to develop an HPLC method for the simultaneous determination of ten quinolones: enoxacin, ofloxacin, norfloxacin, ciprofloxacin, danofloxacin, enrofloxacin, sarafloxacin, oxolinic acid, nalidixic acid, and flumequine, in various tissues of food-producing animals. Separation was achieved on a PerfectSil Target column (250 mm x 4 mm, ODS-3, 5 microm), by MZ-Analysentechnik (Germany), at room temperature. The mobile phase consisted of 0.1% TFA-CH(3)OH-CH(3)CN and was delivered by a gradient program of 35 min. The detection and quantitation was performed on a photodiode array detector at 275 and 255 nm. Caffeine (7.5 ng/microL) was used as the internal standard (IS). Analytes were isolated from tissue samples by 0.1% methanolic TFA solution. SPE, using LiChrolut RP-18 cartridges, was applied for further purification. The extraction protocol was optimized and the final recoveries varied between 92.0 and 107.4%. The method was fully validated according to Commission Decision 2002/657/EC. Limits of quantitation for the examined quinolones extracted from each tissue were much lower than the respective Maximum Residue Levels, ranging between 30 and 50 microg/kg for bovine tissue, between 30 and 55 microg/kg for ovine tissue, and between 40 and 50 microg/kg for porcine tissue.     

Chromatographic Applications on Monolithic Columns: Determination of Triamcinolone, Prednisolone and Dexamethasone in Pharmaceutical Tablet Formulations Using a Solid Phase Extraction and a Monolithic Column

A method is described for extraction, separation and quantification of 3 corticosteroids in tablets (triamcinolone, prednisolone and dexamethasone). The extraction was achieved using a solid phase extraction (SPE) on RP-18 cartridges. The steroids eluates were examined by HPLC. The chromatographic separation was carried out on Chromolith^® Performance RP-18e column, a new packing material consisting of monolithic rods of highly porous silica, using isocratic binary mobile phase of MeOH and H₂O in the ratio 1: 1. A diode array detector was used at 254 nm for detection. The method was validated for system suitability, linearity, precision, limits of detection, specificity, stability and robustness. The limits of detection were 6.25, 6.25 and 12.50 ng per 25 L injected volumes for them respectively. The recovery values of this method were between 89 and 101% and the reproducibility was within 6.86.     

Determination of clofentezine in medical herb extracts by chromatographic methods combined with diode array scanning densitometry

The aim of this study is to report a new procedure for extraction, cleanup and determination of clofentezine in herb extracts by ultrasound‐assisted solvent extraction, SPE and multidimensional planar chromatography with diode array detector (MDPC‐DAD) and/or HPLC‐DAD. The application of various extraction solvents in SPE experiments conducted on octadecyl silane coupled with styrene‐divinylbenzene cartridges for fractionation and purification samples has been described. Normal‐phase systems were used in MDPC experiments on silica layer. The procedure described for the determination of compounds is inexpensive and can be applied to the routine analysis of analytes in plant extracts, after preliminary cleanup and concentration, e.g. by SPE. Application of MDPC‐DAD and HPLC‐DAD is especially useful for correct identification of components of difficult, complicated mixtures, e.g. analytes in medical herbs.     

Determination of pesticides and metabolites in wine by high performance liquid chromatography and second-order calibration methods

The models parallel factor analysis (PARAFAC) and the recently introduced bilinear least squares (BLLS) were applied to develop second-order calibration methods to high performance liquid chromatography with diode array detection (HPLC-DAD) data, where overlap of interferences with the compounds of interest was observed, making the determination and resolution of the analytes possible. In this work, the simultaneous determination of five pesticides and two metabolites in wine samples by HPLC-DAD was performed, using the second-order advantage. The results of two chromatographic methods were compared, involving either isocratic or gradient elution. An appropriate preprocessing method was necessary to correct the effects of time shifts, baseline variations and background. BLLS presented results that were of the same quality as PARAFAC in five cases, but in two other situations only PARAFAC enabled analyte quantitation. Relative errors of prediction lower than 10% for all compounds were obtained, indicating that the methodology employing HLPC-DAD and second-order calibration can handle complex analytical systems.     

Multiresidue method for fourteen fungicides in white grapes by liquid-liquid and solid-phase extraction followed by liquid chromatography-diode array detection

A quantitative, selective and sensitive HPLC method for the analysis of 14 fungicides in white grapes for vinification is described. The proposed method is based on liquid-liquid extraction (LLE) and solid-phase extraction (SPE) followed by liquid chromatography and diode array detection (HPLC-DAD). Dichloromethane-acetone (75:25, v/v) was the most appropriate solvent mix for extracting fungicides in white grapes. Silica cartridges resulted the most appropriate for extract purification purposes. Quality parameters of the proposed multiresidue method presented good recovery (ca. 85% for almost all target compounds) and precision (between 1.5 and 16%), and detection limits lower than maxima residual limits set by the 76/895/ECC and 90/642/ECC Directive. Five different white grapes for vinification produced in Rias Baixas area in Galicia (NW Spain) were analyzed in order to assess the performance of the method with real samples and to determine whether the concentration of the pesticides used exceed their maxima residue levels (MRLs). Results showed that grape concentrations for those identified fungicides were lower than those established by European legislation.     

Matrix-free analysis of aflatoxins in pistachio nuts using parallel factor modeling of liquid chromatography diode-array detection data

In the present study a second-order calibration strategy for high performance liquid chromatography with diode-array detection (HPLC-DAD) has been developed using parallel factor analysis (PARAFAC) and has been applied for simultaneous determination of aflatoxins B₁, B₂, G₁ and G₂ in pistachio nuts in the presence of matrix interferences. Sample preparation was based on solvent extraction (SE) followed by solid phase extraction (SPE) on Bond Elut C18 cartridges. Since the sample preparation procedure was not selective to the analytes of interest, exploiting second-order advantage to obtain concentrations of individual analytes in the presence of uncalibrated interfering compounds seemed necessary. Appropriate pre-processing steps have been applied to correct background signals and the effect of retention time shifts. Transferred calibration data set obtained from standardization of solvent based calibration data has been used in prediction step. The results of PARAFAC on a set of spiked and naturally contaminated pistachio nuts indicated that the four aflatoxins could be successfully determined. The method was validated and multivariate analytical figures of merit were calculated. The advantages of the proposed method are using a low-cost SPE step relative to standard method of aflatoxin analysis (immune affinity column assay), a unique and simple isocratic elution program for all samples and a calibration transfer for saving both chemicals and time of analysis. This study show that coupling of SPE-HPLC-DAD with PARAFAC as a powerful second-order calibration method can be considered as an alternative method for resolution and quantification of aflatoxins in the presence of unknown interferences obtained through analysis of highly complex matrix of pistachio samples and cost per analysis can be reduced significantly.