Very high third-order nonlinear optical activities of intrazeolite PbS quantum dots

Zeolite-intercalated semiconductor quantum dots (QDs) have long been proposed to give very high third-order nonlinear optical (3NLO) responses. However, measurements of their 3NLO responses have not been possible due to the lack of methods to prepare optically transparent QD-incorporating zeolite films supported on optically transparent substrates and to confine QDs only within zeolite interiors. We found that the zeolite-Y films grown on indium-tin-oxide-coated glass plates (Ygs) remain firmly bonded to the substrates during ion exchange with Pb2+ ions, drying, and formation of PbS QDs by treating Pb2+ ions with H2S. A series of Ygs encapsulating different numbers (n = 0, 8, 14, 23, and 33) of PbS in a unit cell [(PbS)n-Yg] were prepared. The PbS QDs were expelled by adsorbed moisture to the external surfaces, and the expelled QDs formed large QDs. Coating of the (PbS)n-Ygs with octadecyltrimethoxysilane results in effective confinement of the QDs within the internal pores. The zeolite-encapsulated PbS QDs showed remarkably high 3NLO activities at 532 and 1064 nm which are unparalleled by other PbS QDs dispersed in other matrixes.     

Photovoltaic effects of CdS and PbS quantum dots encapsulated in zeolite Y

Zeolite Y films (0.35-2.5 μm), into which CdS and PbS quantum dots (QDs) were loaded, were grown on ITO glass. The CdS QD-loaded zeolite Y films showed a photovoltaic effect in the electrolyte solution consisting of Na(2)S (1 M) and NaOH (0.1 M) with Pt-coated F-doped tin oxide glass as the counter electrode. In contrast, the PbS QD-loaded zeolite Y films exhibited a negligible PV effect. This contrasting behavior was proposed to arise from the large difference in driving force for the electron transfer from S(2-) in the solution to the hole in the valence band of QDs, with the former being much larger (~2 eV) than the latter (~1 eV). In the case of CdS QD-loaded zeolite Y with a loaded amount of CdS of 6.3 per unit cell, the short circuit current, open circuit voltage, fill factor, and efficiency were 0.3 mA cm(-2), 423 V, 28, and 0.1%, respectively, under the AM 1.5, 100 mW cm(-2) condition. This cell was stable for more than 18 days of continuous measurements. A large (3-fold) increase in overall efficiency was observed when PbS QD-loaded zeolite Y on ITO glass was used as the counter electrode. This phenomenon suggests that the uphill electron transfer from ITO glass to S in the solution is facilitated by the photoassisted pumping of the potential energy of the electron in ITO glass to the level that is higher than the reduction potential of S by PbS QDs. Under this condition, the incident-photon-to-current conversion efficiency (IPCE) value at 398 nm was 42% and the absorbed-photon-to-current conversion efficiency (APCE) value at 405 nm was 82%. The electrolyte-mediated interdot charge transport within zeolite films is concluded to be responsible for the overall current flow.     

Stabilization of PbS quantum dots by high molecular polyvinylpyrrolidone

The article describes the results of the investigations of optical and luminescent properties of PbS suspensions and composite coatings stabilized by high‐molecular polyvinylpyrrolidone. Experiments show strong dependence of optical properties and stability of the materials on the concentration ratio between PbS nanoparticles and polymer. Copyright © 2015 John Wiley & Sons, Ltd.     

Size-dependent extinction coefficients of PbS quantum dots

We report here on a detailed study on PbS colloidal quantum dots. A characterization via X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) allowed us to reliably determine the diameter and the shape of the nanocrystals. These data, together with second-derivative analysis of the absorption spectra, allowed us to determine the size dependence of seven transitions in the absorption spectrum; some of these transitions were identified on the basis of their normalized confinement energy. The size dependence of the first excitonic transition was best modeled by a four-band envelope approach which considers the anisotropy of the band edges (Andreev, A. D.; Lipovskii, A. A. Phys. Rev. B: Condens. Matter Mater. Phys. 1999, 59, 15402-15404). The extinction coefficients were calculated using concentrations obtained from inductively coupled plasma atomic emission spectrometry (ICP-AES), and their size dependence was found to follow a power law with exponent equal to approximately 2.5. In contrast with what was expected from the effective mass approximation, the per particle absorption cross section of the lowest transition was found to be strongly dependent on the particle size.     

Preparation and third-order optical nonlinearity of self-assembled chitosan/CdSe-ZnS core-shell quantum dots multilayer films

The self-assembled chitosan CdSe quantum dots (QDs) and chitosan CdSe-ZnS core-shell QDs films have been prepared by using layer-by-layer electrostatic technique. The well-ordered nanostructure and the layer-by-layer deposition of the QDs are revealed by AFM and exciton absorption spectra, respectively. The optical nonlinearity of the composite films were studied by using Z-scan technique with femtosecond pulses at the wavelength of 790 nm, the value of third-order susceptibility of core-shell QDs are measured to be about 1.1 x 10(-8) esu, which is about 200% larger than that of CdSe QDs of 5.3 x 10(-9) esu. This has potential applications in all-optical switches in optical information processing.     

Controlled aging of PbS colloidal quantum dots under mild conditions

A new controlled aging methodology was developed for the synthesis of PbS colloidal quantum dots (QDs), applying larger PbS QDs as a starting material for smaller QDs by application of environmentally friendly oleic acid and oleylamine as reagents. This simple and mild procedure provides a possible strategy for tailoring the size-dependent properties of PbS QDs.     

Self-selective recovery of photoluminescence in amphiphilic polymer encapsulated PbS quantum dots

Self-selected recovery of the photoluminescence (PL) of amphiphilic polymer encapsulated PbS quantum dots (QDs) was observed in water for the first time and possible mechanisms were proposed based on investigations by means of transmission electron microscopy, X-ray photoelectron spectroscopy (XPS), X-ray diffraction and fluorescence spectroscopy. Water-soluble PbS QDs were synthesized by transferring monodispersed QDs capped with hydrophobic ligands of oleylamine from an organic solvent into water via amphiphilic polymers poly(maleic anhydride-alt-1-octadecene-co-poly(ethylene glycol)). The water transfer process leads to a double size distribution (5.6 ± 0.9 nm and 2.7 ± 0.4 nm), attributed to ligand etching together with Ostwald ripening, as well as the fast decay of PL. The automatic recovery of the PL in PbS QDs stored in water in the dark for 3 months was only observed for the subset of smaller QDs and is largely due to the removal of surface defects with aging, as evidenced by the decreased percentage of unpassivated surface atoms from XPS studies. In contrast, the PL of the subset of larger QDs in the same sample does not self-recover in water and can only be slightly recovered by transferring them into environments with less external quenches. The results strongly suggest that it is the surface defect in the larger QDs themselves, introduced during Ostwald ripening, that is primarily responsible for their non-emitting status or rather low PL intensity under different conditions. The increase of unpassivated Pb atoms in larger PbS QDs after the 3 month aging has been confirmed by XPS, which explains their non-recovery behavior in water. The PL-recovered QD sample in water is very stable and shows comparable photostability to the initial QDs dispersed in an organic phase.     

Tight confinement of semiconductor quantum dots within zeolite by surface silylation

Various MX (M = Cd, Zn, and Mn, X = S and Se) semiconductor quantum dots (QDs) were prepared in zeolite Y. While the QDs are readily expelled from zeolite interior upon exposure of the MX QD-incorporating zeolite Y ([MX]-Y) to the ambient atmosphere due to moisture adsorption, they remain tightly confined within zeolites even after exposure to the moist atmosphere for several weeks when the surfaces were silylated with various silylating agents. This methodology will facilitate the characterization of the zeolite-encapsulated QDs and the application of QD-incorporating zeolites.     

Photocatalysis of PbS quantum dots in a quantum dot-sensitized solar cell: photovoltaic performance and characteristics

PbS QDs have been synthesized by an in situ photocatalysis method using the photocatalytic activity of nanocrystalline TiO(2) films. Both the photovoltaic response and size of the synthesized PbS QDs were analyzed. Compared with the conventional synthesis route, this method is simpler and produces less waste.     

Linear and nonlinear optical studies of CdS1−x Se x quantum dots

In this contribution we present and discuss our measurements on CdS_1?x Se _x quantum dots in a glass matrix. In linear absorption measurements we find the typical blue shift of the transitions with decreasing crystallite radius due to quantization. The luminescence shows a significant Stokes shift with respect to absorption, which is interpreted in terms of strong exciton-phonon coupling and allows to deduce the Huang-Rhys factor S. Under high excitation we find an additional emission band on the high energy side, which can be attributed to the recombination of an excited two electron-hole pair state to a one electron-hole pair state in agreement with theory. Pump and probe beam experiments give a bleaching but no hole burning. Finally we discuss some open questions especially concerning the high energy structures in the absorption spectrum.     

Determination of the size of quantum dots by fluorescence spectroscopy

There has been a lack of quick, simple and reliable methods for determination of nanoparticle size. An investigation of the size of hydrophobic (CdSe) and hydrophilic (CdSe/ZnS) quantum dots was performed by using the maximum position of the corresponding fluorescence spectrum. It has been found that fluorescence spectroscopy is a simple and reliable methodology to estimate the size of both quantum dot types. For a given solution, the homogeneity of the size of quantum dots is correlated to the relationship between the fluorescence maximum position (FMP) and the quantum dot size. This methodology can be extended to the other fluorescent nanoparticles. The employment of evolving factor analysis and multivariate curve resolution-alternating least squares for decomposition of the series of quantum dots fluorescence spectra recorded by a specific measuring procedure reveals the number of quantum dot fractions having different diameters. The size of the quantum dots in a particular group is defined by the FMP of the corresponding component in the decomposed spectrum. These results show that a combination of the fluorescence and appropriate statistical method for decomposition of the emission spectra of nanoparticles may be a quick and trusted method for the screening of the inhomogeneity of their solution.     

Preparation of ultrasmall, uncapped PbS quantum dots via electroporation of vesicles

Electric-field-induced transient pore formation (electroporation) in synthetic unilamellar dioleoylphosphatidylcholine vesicles of 178-nm diameter is utilized for the preparation of subnanometer-size PbS quantum dots. With Pb2+ ions originally entrapped in the vesicles and S2- ions placed in the bulk, their reaction is initiated by the opening of pores and occurs in the bulk. The ensuing self-aggregation of PbS is slowed to the hour and day time scales by its adsorption at the exterior surface of the vesicles. The growth of the particles in the molecular size regime is found to exhibit novel, time-dependent, oscillating red and blue shifts of the characteristic UV absorption band. On the basis of similarities between the oscillating trend of the experimentally observed transition energy and that of the calculated highest occupied molecular orbital-lowest unoccupied molecular orbital gap of (PbS)n clusters with n = 1-9, the wavelengths of the sequential spectral peaks can be assigned to the PbS monomer (237.5 nm), dimer (282 nm), tetramer (232 nm), hexamer (281 nm), octamer (234.5 nm), and nonamer (278-280 nm). Growth beyond the octamer is associated with the customary monotonic red shift of the absorption band. Under the experimental conditions used, a stable system is reached with unchanging spectral features after 20 days. This solution is estimated to contain 1.82 x 10(-5) M (PbS)9 particles, each with a greatest dimension of <9 A.     

Alloyed semiconductor quantum dots: tuning the optical properties without changing the particle size

Alloyed semiconductor quantum dots (cadmium selenium telluride) with both homogeneous and gradient internal structures have been prepared to achieve continuous tuning of the optical properties without changing the particle size. Our results demonstrate that composition and internal structure are two important parameters that can be used to tune the optical and electronic properties of multicomponent, alloyed quantum dots. A surprising finding is a nonlinear relationship between the composition and the absorption/emission energies, leading to new properties not obtainable from the parent binary systems. With red-shifted light emission up to 850 nm and quantum yields up to 60%, this new class of alloyed quantum dots opens new possibilities in band gap engineering and in developing near-infrared fluorescent probes for in vivo molecular imaging and biomarker detection.     

Fluorescent II-VI semiconductor quantum dots in living cells: nonlinear microspectroscopy in an optical tweezers system

In this work we used a setup consisting of an optical tweezers combined with a nonlinear microspectroscopy system to perform scanning microscopy and obtain emission spectra using two photon excited (TPE) luminescence of captured single living cells labeled with core-shell fluorescent semiconductor quantum dots (QDs). The QDs were obtained via colloidal synthesis in aqueous medium with an adequate physiological resulting pH. Sodium polyphosphate was used as the stabilizing agent. The results obtained show the potential presented by this system as well as by these II-VI fluorescent semiconductor quantum dots to perform spectroscopy in living trapped cells in any neighborhood and dynamically observe the cell chemical reactions in real time.     

Simple cubic self-assembly of PbS quantum dots by finely controlled ligand removal through gel permeation chromatography

The geometry in self-assembled superlattices of colloidal quantum dots (QDs) strongly affects their optoelectronic properties and is thus of critical importance for applications in optoelectronic devices. Here, we achieve the selective control of the geometry of colloidal quasi-spherical PbS QDs in highly-ordered two and three dimensional superlattices: Disordered, simple cubic (sc), and face-centered cubic (fcc). Gel permeation chromatography (GPC), not based on size-exclusion effects, is developed to quantitatively and continuously control the ligand coverage of PbS QDs. The obtained QDs can retain their high stability and photoluminescence on account of the chemically soft removal of the ligands by GPC. With increasing ligand coverage, the geometry of the self-assembled superlattices by solution-casting of the GPC-processed PbS QDs changed from disordered, sc to fcc because of the finely controlled ligand coverage and anisotropy on QD surfaces. Importantly, the highly-ordered sc supercrystal usually displays unique superfluorescence and is expected to show high charge transporting properties, but it has not yet been achieved for colloidal quasi-spherical QDs. It is firstly accessible by fine-tuning the QD ligand density using the GPC method here. This selective formation of different geometric superlattices based on GPC promises applications of such colloidal quasi-spherical QDs in high-performance optoelectronic devices.

Gel permeation chromatography can finely control ligand coverage of PbS quantum dots. Self-assembly of these QDs with different ligand density leads to the formation of 2D square, hexagonal and 3D simple cubic and face-centered cubic superlattices.     

基于PbS量子点和金纳米颗粒的可卡因适体传感器的研究

本文采用水热法合成了硫化铅量子点,将其与壳聚糖混合后修饰在玻碳电极上,利用PbS与巯基之间的强烈的键和作用,直接将所合成的带巯基的与可卡因适体互补的DNA固定到电极上,将金纳米颗粒标记在可卡因适体作为示踪物检测可卡因,研制了一种新型的用于快速测定可卡因的适体传感器.该适体传感器与不同浓度的可卡因培育时,可卡因适体与可卡...     

Ligand-dependent particle size control of PbSe quantum dots

Colloidal solutions of monodisperse PbSe quantum dots (QDs) were synthesized by a hot solution chemical method from a reaction mixture of lead oleate and TOPSe (TOP: tri-n-octylphosphine). The synthesis was carried out at a fixed temperature (170 degrees C) and time, while the particle sizes of the PbSe QDs were controlled by using two different kinds of organic ligands with varied chain length. It was seen that the tuning of PbSe QDs are possible by using the proper molar ratio of the co-ligands, such as acetic acid or hexanoic acid, at a fixed reaction temperature and time, verified by TEM and XRD as well as NIR absorption analysis. The effects of different organic acids were studied and the role of additional organic acids might be due to the extent of ligand exchange efficiency between the Pb oleate and acetic/hexanoic acid in the initial stage, which is caused by the steric hindrance effects of the acids.     

酞菁和酞菁铜的三阶非线性光学性质

用INDO/SDCI方法研究了酞菁和酞菁铜的电子结构, 紫外-可见光谱, 三阶非线性光学系数及其色散效应, 发现酞菁铜中Cu^2+对γ的贡献很小, 故酞菁与酞菁铜的γ几乎相等, 我们的计算结果对此进行了合理的解释。     

Forming highly fluorescent near-infrared emitting PbS quantum dots in water using glutathione as surface-modifying molecule

We present a new facile procedure for transferring oil-soluble oleic acid-capped NIR-emitting PbS quantum dots (QDs) into water, using hydrophilic thiol ligands as the surface-modifying agents of the primary capping molecules (oleic acid). The influence of exchange of the primary capping molecules with five different types of thiol molecules is investigated. The results show that highly fluorescent water-soluble PbS QDs are obtained using glutathione as a surface-modifying agent (photoluminescence quantum yield (PL QY), >30%); significantly less fluorescent water-soluble QDs were obtained using l-cysteine (PL QY, ~5%); with other three thiol molecules, PbS QDs lose almost completely their fluorescence in aqueous solution. This striking difference among the five thiol molecules may be attributed to the difference in the molecular structure. Next, we explored systematically the conditions of QD water solubilization, storage stability, photostability and cytotoxicity and tested further the resulting water-soluble PbS QDs for the imaging of living animals. The preliminary results from these studies illustrate that our synthesis procedure is very facile and that the as-prepared water-soluble PbS QDs are stable and low-cytotoxic and will be an important potential probe in the imaging of living animals due to free carboxyl and amino groups on the external surface of the QDs.