Simultaneous strain and temperature measurement using a highly birefringence fiber loop mirror and a long-period grating written in a photonic crystal fiber

We present a new design for simultaneous strain and temperature measurement using a high-birefringence fiber loop mirror (HiBi-FLM) concatenated with a temperature-insensitive long-period grating (LPG) written in a photonic crystal fiber (PCF). The FLM acts as a sensor head, while the LPG in PCF serves as a filter to convert wavelength variation to optical power change. By measuring the wavelength variation and the power difference of two near peaks in the spectral response of this configuration, simultaneous strain and temperature measurement is obtained.     

Temperature-independent refractometer based on fiber-optic Fabry–Perot interferometer

A miniature fiber-optic refractometer based on Fabry–Perot interferometer (FPI) has been proposed and experimentally demonstrated. The sensing head consists of a short section of photonics crystal fiber (PCF) spliced to a single mode fiber (SMF), in which the end-face of the PCF is etched to remove holey structure with hydrofluoric (HF) acid. A Fabry–Perot interference spectrum is achieved based on the reflections from the fusion splicing interface and the end-face of the core of PCF. The interference fringe is sensitive to the external refractive index (RI) with an intensity-referenced sensitivity of 358.27 dB/RIU ranging from 1.33 to 1.38. The sensor has also been implemented for the concentration measurement of λ-phage DNA solution. In addition, the dip intensity is insensitive to the ambient temperature variation, making it a good candidate for temperature-independent bio-sensing area.     

用157 nm激光制作的光子晶体光纤法布里-珀罗传感器

157nm准分子激光用于微加工具有单光子能量高,峰值功率高,材料吸收系数高,分辨率高等优点。利用157nm激光微加工的方法,在光子晶体光纤上融切出微小矩形孔,从而构成腔长为45.6μm的微光纤法布里-珀罗干涉腔,得到的干涉条纹平滑,衬比度约为26dB,并从激光与石英材料的相互作用上分析了形成较好干涉条纹的原因。把这种微腔应用于应变测量,在550μm范围内,腔长增量相对于应变的灵敏度为0.32nm/μm,线形度达0.9994。实验证明该微腔对温度不敏感,800℃范围内腔长变化仅20nm。157nm准分子激光加工光纤法布里-珀罗腔方法简单,一次成型,具有较高的加工效率和精度,有望实现光纤法布里-珀罗腔的规模化批量制造,具有较好的应用前景。     

Optical refractometer based on large-core air-clad photonic crystal fibers

A large-core air-clad photonic crystal fiber-based sensing structure is described, which is sensitive to refractive index. The sensing head is based on multimodal interference, and relies on a single-mode/large-core air-clad photonic crystal fiber (PCF)/single-mode fiber configuration. Using two distinct large-core air-clad PCF geometries-one for refractive index measurement and the other for temperature compensation, it was possible to implement a sensing head sensitive to refractive index changes in water as induced by temperature variations. The results indicated the high sensitivity of this sensing head to refractive index variations of water, and a resolution of 3.4×10(-5) refractive index units could be achieved.     

Intensity measurement based temperature-independent strain sensor using a highly birefringent photonic crystal fiber loop mirror

A fiber-optic strain sensor is demonstrated by using a short length of highly birefringent photonic crystal fiber (HiBi-PCF) as the sensing element inserted in a fiber loop mirror (FLM). Due to the ultralow thermal sensitivity of the HiBi-PCF, the proposed strain sensor is inherently insensitive to temperature. When a distributed-feedback (DFB) laser passes through the FLM, the output power is only affected by the transmission spectral change of the FLM caused by the strain applied on the HiBi-PCF. Based on intensity measurement, an optical power meter is adequate to deduce the strain information and an expensive optical spectrum analyzer (OSA) would not be needed.     

基于光子晶体光纤模间干涉的折射率测量灵敏度分析

通过理论分析和数值模拟,研究了一种基于光子晶体光纤(PCF)模间干涉的干涉计的灵敏度.根据光纤模间干涉理论,结合光子晶体光纤的归一化频率,分析了PCF干涉计测量气体折射率的原理,得到一个可以衡量PCF干涉计灵敏度的参数δn_s.通过对该参数物理意义的分析可以得出,PCF纤芯附近第一层气孔对灵敏度影响最大.相比于常规气孔结构,把PCF第一层气孔变为面积更大的圆与椭圆复合孔,可显著提高传感灵敏度.     

一种基于模间干涉的亚波长直径光纤气体折射率传感

设计了一种基于模间干涉的亚波长直径光纤气体折射率传感方案,并分析了其测量灵敏度.将标准单模光纤和一段仅传输基模与二阶模的无包层亚波长直径光纤结合形成传感头,通过分析传感头外气体折射率的变化对两个模式干涉谱峰值移动的影响,研究了这种传感器的折射率测量灵敏度.结果表明,这种传感器的灵敏度高于利用折射率引导型光子晶体光纤的基于模间干涉的折射率传感器.因为没有气体向微孔扩散的过程,这种基于模间干涉的亚波长光纤折射率传感器可用于实时探测.     

Temperature sensor based on an isopropanol-sealed photonic crystal fiber in-line interferometer with enhanced refractive index sensitivity

We fabricate a simple, compact, and stable temperature sensor based on a liquid-sealed photonic crystal fiber (PCF) in-line nonpolarimetric modal interferometer. Different from other reported PCF devices, it does not need expensive polarimetric devices, and the liquid is sealed in one fiber. The device consists of a stub of isopropanol-filled PCF spliced between standard single-mode fibers. The temperature sensitivity (-166 pm/°C) increases over an order of magnitude compared with those of the previous sensors based on air-sealed PCF interferometers built via fusion splicing with the same mechanism. In addition, the refractive index sensitivity also increases. Higher temperature sensitivity can be realized by infiltrating some liquid having a higher thermo-optic coefficient into the microholes of the PCF.     

Temperature-sensitive dual-segment polarization maintaining fiber Sagnac loop mirror

A new temperature-sensitive fiber Sagnac loop mirror (FLM) is proposed using two segments of polarization maintaining fiber (PMF). The proposed dual-segment FLM provides greater temperature sensitivity in the spectral spacing detuning compared to the conventional single-segment configuration. Besides, the proposed configuration also enables both efficient positive and negative spectral spacing detuning by rising the temperature of one of the PMF segments. The experimental results show that the proposed configuration has achieved a great improvement in increasing spectral spacing variation range by 6.6 times and an increment of temperature sensitivity as much as 337.6% as compared to the conventional configuration.     

Mach-Zehnder interferometer formed in a photonic crystal fiber based on a pair of long-period fiber gratings

We demonstrate implementation of an all-fiber Mach-Zehnder interferometer formed in a photonic crystal fiber (PCF). We formed the all-PCF Mach-Zehnder interferometer by mechanically inducing two identical long-period fiber gratings (LPGs) in the PCF. The spectral properties of a LPG and a LPG pair were investigated. The interference fringe formed within the stop band of the LPG pair varied with the period and the strength of the gratings, and the fringe spacing was decreased with increasing grating separation. From the fringe spacing measurement the differential effective group index of the PCF was calculated to be deltam approximately equal to 2.8 x 10(-3).     

光子晶体光纤中级联长周期光栅双谐振波长干涉的研究

通过分析单模光纤SMF中的LPG对的传输特性及几个因素对干涉透射谱的影响,并结合前期工作,主要研究光子晶体光纤(PCF)中的LPG对在1665 nm附近U波段传输特性.结合光栅耦合强度与波长的关系以及拍长与波长的关系,对PCF中LPG对的参数进行选择设计,得到双谐振波长的干涉谱,级联LPG对构成的MZI干涉光谱在两个谐振波长处由于耦合强度不同而不同.     

Raman-resonance-enhanced composite nonlinearity of air-guided modes in hollow photonic-crystal fibers

Coherent anti-Stokes Raman scattering (CARS) is used to measure relations between the resonant (Raman) and nonresonant (Kerr-type) optical nonlinearities of air-guided modes in a hollow-core photonic-crystal fiber (PCF). We demonstrate that, due to its interference nature, CARS provides a convenient tool for measuring the contribution of the fiber cladding to the total nonlinearity sensed by air-guided modes in hollow PCFs. On a Raman resonance with molecular vibrations in the gas that fills the fiber core, a two-color laser field is shown to induce optical nonlinearities that are several orders of magnitude higher than the nonresonant Kerr-type nonlinearities typical of air-guided PCF modes.     

Reflectivity characteristics of the fiber loop mirror with a polarization controller

In this paper, reflectivity characteristics of a fiber loop mirror (FLM), which is formed by inserting a fiber polarization controller (PC) into the fiber loop of an ordinary FLM, are investigated in detail. A theoretical model for determining the reflectivity characteristics of the FLM is present by using the equivalent optical path technique, and the reflectivity characteristics of the FLM are then simulated with the model. The simulation results show that, when the FLM is based on a 3 dB optical coupler (OC), the reflectivity of the FLM may be continuously adjusted to any value between 1 and 0 by changing the PC state, i.e. by either changing the fast axis orientation or the birefringence intensity of the PC alone, as well as both of them; the reflectivity spectra of the FLM are wide and flattened for any PC state, mainly limited by the operating bandwidth of the OC used. The reflectivity characteristics of the FLM are further tested experimentally. The results verify that the reflectivity of the FLM may truly be continuously adjusted between its maximum and minimum values by changing the PC state. The obtainable maximum and minimum reflectivities of the FLM are measured to be 93% and 2%, respectively. Moreover, the experimental results are in agreement with those of the simulations.     

Design of all-optical strain and temperature sensor by micrometer high-birefringence fiber loop mirror

High-birefringence fiber loop mirrors (Hi-Bi FLM) are interested in a variety of applications such as temperature and strain sensors, but their serious limitation is their structure length, in the order of several meters, for application in optical integrated devices. In this paper, we have used electromagnetically induced transparency (EIT) phenomena to reduce the length of Hi-Bi FLM to below 50 μm, where 3-level nanocrystals (QDs) are doped in Hi-Bi FLM to realize EIT conditions. EIT phenomenon amplifies refractive index differences of slow and fast axes of Hi-Bi FLM, so that the length of FLM to obtain required phase difference is reduced. This proposed sensor can measure temperature and strain simultaneously with 62.5 pm/°C and 0.3 μm, respectively.     

Self-stabilization of the carrier-envelope phase of an optical parametric amplifier verified with a photonic crystal fiber

Experimental verification is given for self-stabilization of the carrier-envelope phase (CEP) of idler pulses from a noncollinear optical parametric amplifier. The verification is performed by spectral interference (SI) between an octave-broadened supercontinuum (SC) and its second harmonic. This SC is generated by nonlinear propagation of the second harmonic of the idler through a photonic crystal fiber (PCF). Although the modulational instability causes the intensity and CEP fluctuation and the amplified spontaneous emission noise in PCF degrades the visibility of SI, the CEP is verified to be stabilized.     

具有有源闭合腔的光纤光栅传感系统地址查询技术

基于熔融拉锥技术研制的3 dB宽带耦合器的光纤环形镜的工作原理,提出了一种新型的具有有源闭合腔装置的光纤光栅传感系统。在用作闭合共振腔端镜的环形镜中写入十个波分复用光纤光栅传感元,利用共振腔中接入的法布里-珀罗滤波器,通过控制电压对传感光栅的波长扫描,实现对传感地址的查询。用非平衡的迈克耳孙扫描干涉仪将传感光栅的波长漂移信息变为相移信息,实现传感信号的解调。系统传感灵敏度的实验值为1.5835°/10-6ε,与理论值(1.6662°/10-6ε)基本吻合。     

高温光子晶体光纤温度传感器

针对大于500℃的高温环境,提出了一种可用于高温温度测量的高温光子晶体光纤(PCF)温度传感器。在光子晶体光纤末端熔接一段纯石英无芯光纤构成外腔式光纤法珀腔(EFPI)结构。纯石英无芯光纤在高温下的热膨胀和热光效应使得EFPI的光学腔长发生变化。结合光纤白光干涉测量技术,通过测量EFPI的腔长得到被测温度。在不同温度环境下,对腔长为175μm的EFPI光纤温度传感器进行连续测量。测量结果显示,设计的高温光纤温度传感器在27~1100℃范围内,腔长-温度三阶拟合精度达到99.95%,腔长-温度灵敏度为(0.851+0.0023T-0.000000957T2)nm/℃,其中在1100℃时,温度测量分辨率为0.225℃。     

A novel temperature and strain sensing method based on high-birefringence fiber loop mirror

A novel temperature and strain sensor based on a fiber loop mirror (FLM) consisting of high-birefringence polarization-maintaining fibers is proposed. The output spectrum was theoretically deduced based on Jones matrix. Two equal-length high-birefringence fibers (HBFs) with different birefringence indices were inserted into the FLM. The temperature and strain sensing system was built. The sensitivity coefficients of temperature and strain were calibrated respectively. The double parameters measurement of temperature and strain was realized. High resolution of 2.38 μ? has been achieved for strain sensing. Meanwhile, the temperature resolution is 0.016 °C.     

基于半导体光放大器的可调谐多波长光纤激光器

报道了一种新型环形腔可调谐多波长光纤激光器,腔内以半导体光放大器为增益介质,利用高双折射光纤构成的高双折射环形镜的滤波特性,在室温下,获得了基本符合ITU-T标准100GHz的17个波长以上的稳定多波长输出.各信道峰值功率差小于6 dB,线宽小于0.102 nm,信噪比大于25 dB.通过调节高双折射环形镜内的偏振控制器状态实现了这一组波长整体在50GHz范围内连续可调谐.并利用实验方法,对该光纤激光器应用于掺铒光纤放大器对多信道放大性能测试的可行性进行了初步探讨.     

Partially liquid-filled hollow-core photonic crystal fiber polarizer

A compact fiber polarizer is demonstrated by the filling of selected air holes of a hollow-core photonic crystal fiber (PCF) with a liquid. The liquid-filling results in an asymmetric waveguide structure, leading to a large polarization dependent loss. A 6 mm long ethanol-filled PCF exhibits a polarization extinction ratio of ～18 dB over a wavelength range from 1480 nm to 1600 nm.