Molecular dynamics simulation of the (0 0 0 1) α-Al2O3 and α-Cr2O3 surfaces

A simple, rigid pair-potential model is applied to investigate the dynamics of the (0 0 0 1) α-Al₂O₃ and α-Cr₂O₃ surfaces using the molecular dynamics technique. The simulations employ a two-stage equilibration process: in the first stage the simulation-cell size is determined via the constant-stress ensemble, and in the second stage the equilibration of the size-corrected simulation cell is continued in the canonical ensemble. The thermal expansion coefficients of bulk alumina and chromia are evaluated as a function of temperature. Furthermore, the surface relaxation and mean-square displacement of the atoms versus depth into the slab are calculated, and their behaviour in the surface region analysed in detail. The calculations show that even moderate temperatures (∼400 °C) give rise to displacements of the atoms at the surface which are similar to the lattice mismatch between α-alumina and chromia. This will help in the initial nucleation stage during thin film growth, and thus facilitate the deposition of α-Al₂O₃ on (0 0 0 1) α-Cr₂O₃ templates.     

Hydroxylated α-Al2O3 (0 0 0 1) surfaces and metal/α-Al2O3 (0 0 0 1) interfaces

X-ray photoelectron spectroscopy was applied to study the hydroxylation of α-Al₂O₃ (0 0 0 1) surfaces and the stability of surface OH groups. The evolution of interfacial chemistry of the α-Al₂O₃ (0 0 0 1) surfaces and metal/α-Al₂O₃ (0 0 0 1) interfaces are well illustrated via modifications of the surface O1s spectra. Clean hydroxylated surfaces are obtained through water- and oxygen plasma treatment at room temperature. The surface OH groups of the hydroxylated surface are very sensitive to electron beam illumination, Ar⁺ sputtering, UHV heating, and adsorption of reactive metals. The transformation of a hydroxylated surface to an Al-terminated surface occurs by high temperature annealing or Al deposition.     

The Fe3O4 origin of the “Biphase” reconstruction on α-Fe2O3(0 0 0 1)

The so-called Biphase termination on α-Fe₂O₃ has been widely accepted to be a structure with a 40 Å unit supercell composed of coexisting islands of Fe_1−xO and α-Fe₂O₃. Based on thermodynamic arguments and experimental evidence, including transmission electron diffraction, imaging, magnetic and spectroscopic information, it is found that the previously proposed structure model is inaccurate. The actual Biphase structure is instead a layered structure related to the reduction of α-Fe₂O₃ to Fe₃O₄. A model for the Biphase termination is proposed which does not contain islands of Fe_1−xO but instead consists of bulk α-Fe₂O₃ and a Fe₃O₄-derived overlayer. The proposed model is consistent with all current and previously reported experimental findings.     

Molecular dynamics simulations of CFx (x = 2, 3) molecules at Si3N4 and SiO2 surfaces

Molecular dynamics simulations of the interaction between CF_x (x = 2, 3) molecules and crystalline as well as amorphous Si₃N₄ and SiO₂ surfaces using a density-functional based method are reported. The binding energies of various configurations at the crystalline surfaces were calculated. The effect of hydrogen substitution was studied.     

Structure and electronic properties calculation of ultrathin α-Al2O3 films on (0 0 0 1) α-Cr2O3 templates

Ab initio total energy Hartree-Fock calculations of ultrathin films of α-Al₂O₃ on (0 0 0 1) α-Cr₂O₃ templates are presented. The surface relaxation, the in-plane reconstruction and the surface and strain energies of the slabs are studied as a function of alumina film thickness. The surface Al layer is found to relax inwards considerably, with the magnitude of the inwards relaxation depending on the thickness of the ultrathin alumina film in a non-linear manner. The calculations also reveal that ultrathin films of alumina lower the surface energy of (0 0 0 1) α-chromia substrates. This indicates that the (0 0 0 1) α-chromia surface provides favourable conditions for the templated growth of α-alumina. However, increasing the alumina film thickness is found to give rise to a significant increase in strain energy. Finally, the electronic properties at the surface of the (0 0 0 1) α-Al₂O₃/α-Cr₂O₃ slabs are investigated. Here it is found that the alumina coating gives rise to an increase in the covalency of the bonds at the surface of the slabs. In contrast, the influence of an alumina layer on the electrostatic potential at the surface of the chromia slab is relatively minor, which should also be beneficial for the templated growth of α-alumina on (0 0 0 1) α-chromia substrates.     

Theoretical and experimental studies of the structure and dynamics of the CaF2(1 1 1) surface

The structure and dynamics of the CaF₂(1 1 1) surface were investigated by means of low-energy electron diffraction (LEED) and molecular dynamics (MD) simulations at 300 K. LEED beam intensities were recorded as a function of electron energy and were analyzed with the tensor LEED approach. Positions as well as mean square amplitudes of the ions in the first layers were fitted to the experimental I(E) curves. According to both LEED and MD, the CaF₂(1 1 1) surface structure is similar to the bulk-terminated structure with only small relaxation of the outermost ions. Moreover, both methods show an enhancement of vibrational amplitudes in the outermost F-Ca-F triple layer.     

Molecular dynamics study on surface structure and surface energy of rutile TiO2 (1 1 0)

The formula for surface energy was modified in accordance with the slab model of molecular dynamics (MDs) simulations, and MD simulations were performed to investigate the relaxed structure and surface energy of perfect and pit rutile TiO₂(1 1 0). Simulation results indicate that the slab with a surface more than four layers away from the fixed layer expresses well the surface characteristics of rutile TiO₂ (1 1 0) surface; and the surface energy of perfect rutile TiO₂ (1 1 0) surface converges to 1.801±0.001 J m⁻². The study on perfect and pit slab models proves the effectiveness of the modified formula for surface energy. Moreover, the surface energy of pit surface is higher than that of perfect surface and exhibits an upper-concave parabolic increase and a step-like increase with increasing the number of units deleted along [0 0 1] and [1 1 0], respectively. Therefore, in order to obtain a higher surface energy, the direction along which atoms are cut out should be chosen in accordance with the pit sizes: [] direction for a small pit size and [0 0 1] direction for a big pit size; or alternatively the odd units of atoms along [1 1 0] direction are removed.     

Growth of copper and palladium on α-Al2O3(0001)

Non-contact atomic force microscopy (NC-AFM) has been used to image the room-temperature growth of copper and palladium on the (1×1) and terminations of α-Al₂O₃(0001). Three-dimensional (3D) clusters of palladium are observed on both the (1×1) and the terminations, with 3D clusters of copper observed on the reconstructed surface. There is evidence of step-edge-dominated growth of palladium on the termination.     

Photo- and thermostimulated processes in α-Al2O3

We reported on the recombination processes determined by the release of electrons from defects connected with the dosimetric 430 K thermostimulated luminescence (TSL) peak as well as with the 260 K TSL peak. These TSL peaks appear in thermochemically reduced α-Al₂O₃ crystals containing hydrogen and emission of these TSL peaks corresponds to luminescence of the F-center. The X-ray exposure or UV excitation in the absorption band of F-centers at 6.0 eV of reduced α-Al₂O₃ crystals doped with acceptor impurities results in the appearance of a broad anisotropic complex absorption band in the spectral region 2.5–3.5 eV and in the appearance of a predominant TSL peak at 430 K. Above 430 K the above-mentioned broad absorption band disappears. Optical bleaching of the 2.5–3.5 eV band is accompanied by the disappearance of the 430 K TSL peak and results in F-center emission. The X-ray or UV excitation of reduced α-Al₂O₃ crystals with donor-type impurities results in the appearance of an anisotropic absorption band at 4.2 eV and the appearance of a dominant TSL peak at 260 K. Above 260 K the 4.2 eV absorption disappears and photostimulated luminescence (PSL) of the F-center recombination luminescence in the 4.2 eV region is no longer observed. Optical bleaching of the 4.2 eV absorption band is accompanied by the disappearance of the 260 K TSL peak. The successful use of reduced α-Al₂O₃ in dosimetry needs the optimization of the concentration of all components (acceptors, hydrogen, intrinsic defects) involved in the thermo- and photostimulated processes.     

Effect of α-Al2O3 on the properties of cold sprayed Al/α-Al2O3 composite coatings on AZ91D magnesium alloy

Composite coatings using pure Al powder blended with α-Al₂O₃ as feedstock were deposited on AZ91D magnesium alloy substrates by cold spray (CS). The content of α-Al₂O₃ in the feedstock was 25 wt.% and 50 wt.%, respectively. The effects of α-Al₂O₃ on the porosity, microhardness, adhesion and tensile strength of the coatings were studied. Electrochemical tests were carried out in neutral 3.5 wt.% NaCl solution to evaluate the effect of α-Al₂O₃ on the corrosion behavior of the coatings. The results showed that the composite coatings possessed lower porosity, higher adhesion strength and tensile strength than cold sprayed pure Al coating. The corrosion current densities of the composite coatings were similar to that of the pure Al coating and much higher than that of bare AZ91D magnesium alloy.     

Defects and Pd growth on the reduced SnO2(1 0 0) surface

Scanning tunneling microscopy experiments on a clean, reduced SnO₂(1 0 0)-(1 × 1) surface reveal surface defects with zero-, one-, and two-dimensions. Point defects consist of missing SnO/SnO₂ units. Line defects are probably crystallographic shear planes that extend to the surface and manifest themselves as rows of atoms, shifted half a unit cell along the [0 1 0] direction. Their ends act as preferential nucleation sites for the formation of Pd clusters upon vapor deposition. Areas of a more reduced surface phase, still with a (1 × 1) structure and a half-unit cell deep, form at [0 0 1]-oriented step edges.     

Iron oxide thin film growth on Al2O3/NiAl(1 1 0)

The electronic structure and the growth morphology of iron oxide thin films were studied by means of Synchrotron Radiation Photoelectron Spectroscopy (SRPES) and Low Energy Electron Diffraction (LEED). A thin well-ordered alumina film on a NiAl(1 1 0) single crystal surface as a template for iron oxide growth was employed. Two different methods of iron oxide film preparation were applied. In the first attempt, iron deposited at room temperature was subsequently annealed in oxygen. Even though a whole layer of iron was oxidized, an expected long-range order was not achieved. The second attempt was to perform reactive deposition. For this reason iron was evaporated in oxygen ambient at elevated substrate temperature. This method turned out to be more efficient. Diffused but clear LEED patterns of six-fold symmetry indicating hexagonal surface atoms arrangement were observed. From the PES measurements, binding energies for Fe2p for grown iron oxide film were established as well as energy distribution curves for the valence band. Growth curves based on Fe3p core-level peak intensities for iron and iron oxide were plotted identifying type of film growth for both deposition methods. Based upon these results we have found evidence for interdiffusion in the interface between alumina and iron oxide at the early stages of growth. Further deposition led to formation of Fe₃O₄(1 1 1) (magnetite) overlayer. Moreover, the quality of the film could also be improved by long-time annealing at temperatures not exceeding 575 K. Higher annealing temperature caused disappearance of LEED pattern indicating loss of long-range ordering.     

Adsorption and diffusion of a single Pt atom on γ-Al2O3 surfaces

Motivated to better understand the interactions between Pt and γ-Al₂O₃ support, the adsorption and diffusion of a single Pt atom on γ-Al₂O₃ was studied using density functional theory. Two different surface models with atoms of various coordination (3–5) were used, one derived from a defected spinel structure, and another derived from the dehydration of boehmite (AlOOH). Adsorption energies are similar for the two surfaces, about −2 eV for the most stable sites, and involve Pt binding to surface O atoms. An unusually strong trapping geometry whereby Pt moves into the surface was identified over the boehmite-derived surface. In all cases the surface transfers 0.2–0.3 e⁻ to the Pt atom. The bonding is explained as being a combination of charge transfer between the surface and Pt atom, polarization of the metal atom, and some weak covalent bonding. The similarity of the two surfaces is attributed to the similar local environments of the surface atoms, as corroborated by geometry analysis, density of states, and Bader charge analysis. Calculated activation barriers (0.3–0.5 eV) for the defected spinel surface indicate fast diffusion and a kinetic Monte Carlo model incorporated these barriers to determine exact diffusion rates and behavior. The kinetic Monte Carlo results indicate that at low temperatures (<500 K) the Pt atom can become trapped at certain surface regions, which could explain why the sintering process is hindered at low temperature. Finally we modeled the adsorption of Pt on hydrated surfaces and found adsorption to be weaker due to steric repulsion and/or decreased electron-donating ability of the surface.     

O2 dissociation on Pd(2 1 1) and Cu(2 1 1) surfaces

We have performed ab initio Density Functional Theory (DFT) based calculations to observe the reactivity of the Pd(2 1 1) and Cu(2 1 1) surfaces towards O₂. In order to properly address the adsorption dynamics, the static potential energy surface calculations have been complemented with first principles molecular dynamics calculations, which reveal interesting steering effects that complicate the dissociation dynamics. We have found that on both surfaces the step microfacets are very reactive and the dissociation of the O₂ molecule at room temperature occurs mostly on those sites.     

The structure of the V2O3(0 0 0 1) surface: A scanned-energy mode photoelectron diffraction study

Scanned-energy mode photoelectron diffraction (PhD), using the O 1s and V 2p photoemission signals, together with multiple-scattering simulations, have been used to investigate the structure of the V₂O₃(0 0 0 1) surface. The results support a strongly-relaxed half-metal termination of the bulk, similar to that found in earlier studies of Al₂O₃(0 0 0 1) and Cr₂O₃(0 0 0 1) surfaces based on low energy electron and surface X-ray diffraction methods. However, the PhD investigation fails to provide definitive evidence for the presence or absence of surface vanadyl (VO) species associated with atop O atoms on the surface layer of V atoms. Specifically, the best-fit structure does not include these vanadyl species, although an alternative model with similar relaxations but including vanadyl O atoms yields a reliability-factor within the variance of that of the best-fit structure.     

Mechanism and energetics of dimerization of SiH2 radicals on H-terminated Si(0 0 1)-(2×1) surfaces

The mechanism and energetics are presented of the dimerization of two adsorbed surface SiH₂ groups on the H-terminated Si(0 0 1)-(2 × 1) surface to form Si₂H₄ species during the initial stages of growth in plasma deposition of hydrogenated amorphous silicon (a-Si:H) films. The reactions are observed during classical molecular-dynamics (MD) simulations of a-Si:H film deposition from SiH₂ radical precursors impinging on an initially H-terminated Si(0 0 1)-(2 × 1) surface and substrate temperature, T, over the range 500T700 K. The Si₂H₄ species resulting from the surface SiH₂ dimerization reactions undergo surface conformational changes resulting in either a non-rotated (NRD) or a rotated dimer (RD) configuration. The RD configuration is found to be the energetically favorable one. The MD simulation results for the structure of the NRD and RD surface Si₂H₄ configurations corroborate with ab initio calculations of optimized adsorption configurations of SiH₂ radicals on crystalline Si surfaces, as well as results of STM imaging of the thermal decomposition of disilane on Si(0 0 1).     

Cluster size effects on hydrazine decomposition on Irn/Al2O3/NiAl(1 1 0)

A series of planar model catalysts were prepared by deposition of size-selected on Al₂O₃/NiAl(1 1 0), and hydrazine decomposition chemistry was used to probe their size-dependent chemical properties. Small Ir_n (n ? 15) on Al₂O₃/NiAl(1 1 0) are able to induce hydrazine decomposition at temperatures well below room temperature, with significant activity first appearing at Ir₇. Both activity and product branching are strongly dependent on deposited cluster size, with these small clusters supporting only the simplest decomposition mechanism: dehydrogenation and N₂ desorption at low temperatures, followed by H₂ recombinative desorption at temperatures above 300 K. For Ir₁₅, we begin to see ammonia production, signaling the onset of a transition to clusters able to support more complex chemistry.     

Specific features of luminescence of radiation-colored α-Al2O3 single crystals

Results of a comparative study on specific features of luminescence of thermochemical and radiation-colored crystals of aluminum oxide have been described. It is shown that crystals containing oxygen vacancies of different origins have identical main optical properties. A vacancy or vacancy-impurity origin of deep traps has been assumed. Some specific features of thermoluminescence (TL), which are common for both types of crystals, such as the dependence of the TL output on the heating rate and the occupancy of deep traps described by the model of interactive trap system, have been established.     

Nucleation of ordered Fe islands on Al2O3/Ni3Al(1 1 1)

Scanning tunneling microscopy (STM) has been used to investigate the nucleation and stability of iron clusters on the Al₂O₃/Ni₃Al(1 1 1) surface as a function of coverage and annealing temperature. We show that atomic beam deposition of iron leads to hexagonally ordered cluster arrangements with a distance of 24 Å between the clusters evidencing the template effect of the alumina film. The shape of the iron clusters is two-dimensional (2D) at deposition temperatures from 130 K to 160 K and three-dimensional (3D) at 300 K. However, the 2D iron clusters grown between 130 K and 160 K are stable up to 350 K.     

Comparative dynamical study of the HD and isotopomers interacting with Pd(1 1 1) and Cu(1 1 0) surfaces

We study the dynamics of HD and H₂ molecules interacting with Pd(1 1 1) and Cu(1 1 0) using the classical trajectory method based on potential energy surfaces obtained from Density Functional Theory calculations. Our results predict a negligible isotopic effect on the dissociative adsorption probability on Pd(1 1 1) whereas on Cu(1 1 0), the adsorption probability for HD(ν_i=0) is slightly lower than for H₂(ν_i=0), mainly due to its lower initial vibrational zero point energy. The final rotational energy distribution of scattered HD and H₂ molecules are very similar. This shows that the asymmetric mass distribution of HD, barely affects the fraction of initial translational energy transferred to rotation during the scattering process. Our calculations point to the larger number of open rotational excitation channels for HD, as the main cause of rotational excitation probabilities larger than for H₂. The theoretical apparent rotational temperature, T_rot, of HD molecules scattered from Pd(1 1 1) at impact energy , is in good agreement with the experimental value. In contrast, for Cu(1 1 0) the theoretical T_rot is much lower than the value measured for Cu(1 0 0). Possible reasons for such a discrepancy between theory and experiments are discussed.