A new mixed subgrid-scale model for large eddy simulation of turbulent drag-reducing flows of viscoelastic fluids

A mixed subgrid-scale(SGS) model based on coherent structures and temporal approximate deconvolution(MCT) is proposed for turbulent drag-reducing flows of viscoelastic fluids. The main idea of the MCT SGS model is to perform spatial filtering for the momentum equation and temporal filtering for the conformation tensor transport equation of turbulent flow of viscoelastic fluid, respectively. The MCT model is suitable for large eddy simulation(LES) of turbulent dragreducing flows of viscoelastic fluids in engineering applications since the model parameters can be easily obtained. The LES of forced homogeneous isotropic turbulence(FHIT) with polymer additives and turbulent channel flow with surfactant additives based on MCT SGS model shows excellent agreements with direct numerical simulation(DNS) results. Compared with the LES results using the temporal approximate deconvolution model(TADM) for FHIT with polymer additives, this mixed SGS model MCT behaves better, regarding the enhancement of calculating parameters such as the Reynolds number.For scientific and engineering research, turbulent flows at high Reynolds numbers are expected, so the MCT model can be a more suitable model for the LES of turbulent drag-reducing flows of viscoelastic fluid with polymer or surfactant additives.     

On the effect of an anisotropy-resolving subgrid-scale model on large eddy simulation predictions of turbulent open channel flow with wall roughness

A large eddy simulation (LES) was conducted of turbulent flow in a channel with a rough wall on one side and a free surface on the other by adopting an anisotropy-resolving subgrid-scale (SGS) model. A shear Reynolds number of Re_τ = 395 was used based on the mean friction velocity and channel height. To investigate the grid dependency of the LES results caused by the SGS model, three grid resolutions were tested under the same definition of a roughness shape by using the immersed boundary method. The results obtained were compared with direct numerical simulation data with and without the wall roughness and those without the extra anisotropic term. The primary focus was on how the present anisotropic SGS model with coarser grid resolutions can properly provide the effects of roughness on the mean velocity and turbulent stresses, leading to a considerable reduction of the computational cost of LES.     

Rotation effect on near-wall turbulence statistics and flow structures

Turbulent flow in an axially rotating pipe, involving complicated physical mecha- nism of turbulence, is a typical problem for the study of rotating turbulent flow. The pipe rotation induces two effects on the flow. One is the stabilizing effect due to the centrifu- gal and Coriolis forces, which accounts for the relaminarization of the turbulence[1—3] and the reduction of the friction coefficient at the pipe wall. The behavior is also related to the wall streaks inclining to the azimuthal di…     

Evaluating the modulated gradient model in large eddy simulation of channel flow with OpenFOAM

Recently, a new family of subgrid-scale (SGS) models, termed as gradient-based models, has been introduced to calculate the SGS stresses in large eddy simulation (LES). In the present work, the modulated gradient model (MGM) was implemented in the OpenFOAM package, and the pimpleFoam solver was improved to be adopted with non-eddy viscosity models. The MGM is a new, nonlinear model that uses the local equilibrium hypothesis to assess the SGS kinetic energy and the velocity gradient tensor to calculate the relative weight of the different components of the SGS stress tensor. To evaluate the accuracy of the MGM along with the modified pimpleFoam solver, a turbulent channel flow was simulated at the three different frictional Reynolds numbers of 180, 395 and 590. Furthermore, the results were compared with direct numerical simulation data, as well as the numerical results obtained by the established SGS models such as the dynamic Smagorinsky model (DSM). A suitable accuracy for the first- and second-order turbulence parameters was reported. Moreover, it was demonstrated that MGM is computationally efficient compared to the DSM in treating channel flow.     

Large eddy simulation of orientation and rotation of ellipsoidal particles in isotropic turbulent flows

The rotational motion and orientational distribution of ellipsoidal particles in turbulent flows are of significance in environmental and engineering applications. Whereas the translational motion of an ellipsoidal particle is controlled by the turbulent motions at large scales, its rotational motion is determined by the fluid velocity gradient tensor at small scales, which raises a challenge when predicting the rotational dispersion of ellipsoidal particles using large eddy simulation (LES) method due to the lack of subgrid scale (SGS) fluid motions. We report the effects of the SGS fluid motions on the orientational and rotational statistics, such as the alignment between the long axis of ellipsoidal particles and the vorticity, the mean rotational energy at various aspect ratios against those obtained with direct numerical simulation (DNS) and filtered DNS. The performances of a stochastic differential equation (SDE) model for the SGS velocity gradient seen by the particles and the approximate deconvolution method (ADM) for LES are investigated. It is found that the missing SGS fluid motions in LES flow fields have significant effects on the rotational statistics of ellipsoidal particles. Alignment between the particles and the vorticity is weakened; and the rotational energy of the particles is reduced in LES. The SGS-SDE model leads to a large error in predicting the alignment between the particles and the vorticity and over-predicts the rotational energy of rod-like particles. The ADM significantly improves the rotational energy prediction of particles in LES.     

Large eddy simulation of channel flow with and without periodic constrictions using the explicit algebraic subgrid-scale model

We analyse the performance of the explicit algebraic subgrid-scale (SGS) stress model (EASSM) in large eddy simulation (LES) of plane channel flow and the flow in a channel with streamwise periodic hill-shaped constrictions (periodic hill flow) which induce separation. The LESs are performed with the Code_Saturne which is an unstructured collocated finite volume solver with a second-order spatial discretisation suitable for LES of incompressible flow in complex geometries. At first, performance of the EASSM in LES of plane channel flow at two different resolutions using the Code_Saturne and a pseudo-spectral method is analysed. It is observed that the EASSM predictions of the mean velocity and Reynolds stresses are more accurate than the conventional dynamic Smagorinsky model (DSM). The results with the pseudo-spectral method were, in general, more accurate. In the second step, LES with the EASSM of flow separation in the periodic hill flow is compared to LES with the DSM, no SGS model and a highly resolved LES data using the DSM. Results show that the mean velocity profiles, the friction and pressure coefficients, the length and shape of the recirculation bubble, as well as the Reynolds stresses are considerably better predicted by the EASSM than the DSM and the no SGS model simulations. It was also observed that in some parts of the domain, the resolved strain-rate and SGS shear stress have the same sign. The DSM cannot produce a correct SGS stress in this case, in contrast to the EASSM.     

A velocity-estimation subgrid model constrained by subgrid scale dissipation

Purely dissipative eddy-viscosity subgrid models have proven very successful in large-eddy simulations (LES) at moderate resolution. Simulations at coarse resolutions where the underlying assumption of small-scale universality is not valid, warrant more advanced models. However, non-eddy viscosity models are often unstable due to the lack of sufficient dissipation. This paper proposes a simple modeling approach which incorporates the dissipative nature of existing eddy viscosity models into more physically appealing non-eddy viscosity SGS models. The key idea is to impose the SGS dissipation of the eddy viscosity model as a constraint on the non-eddy viscosity model when determining the coefficients in the non-eddy viscosity model. We propose a new subgrid scale model (RSEM), which is based on estimation of the unresolved velocity field. RSEM is developed in physical space and does not require the use of finer grids to estimate the subgrid velocity field. The model coefficient is determined such that total SGS dissipation matches that from a target SGS model in the mean or least-squares sense. The dynamic Smagorinsky model is used to provide the target dissipation. Results are shown for LES of decaying isotropic turbulence and turbulent channel flow. For isotropic turbulence, RSEM displays some level of backward dissipation, while yielding as good results as the dynamic Smagorinsky model. For channel flow, the results from RSEM are better than those from the dynamic Smagorinsky model for both statistics and instantaneous flow structures.     

不同亚格子模式在后台阶湍流流动大涡模拟中的应用

本文用大涡模拟方法研究了湍流后台阶流场中的大涡演变过程,并在此基础上研究了目前大涡模拟中比较常用的六种亚格子模式。在相同的流动几何参数以及计算条件下,给出了不同亚格子模式下湍流流动瞬时压力场以及流场中瞬时粘性大小的分布,尤其给出了流场瞬时演变的大尺度涡结构。将六种亚格子模式从回流区长度、计算时间、计算结果的准确性和流场稳定性等不同角度进行了比较。为选取合适的亚格子模式深入研究湍流耗散机理奠定了基础。     

Constrained large-eddy simulation of separated flow in a channel with streamwise-periodic constrictions

Constrained large-eddy simulation (CLES) method has been recently developed by Chen and his colleagues for simulating attached and detached wall-bounded turbulent flows. In CLES, the whole domain is simulated using large-eddy simulation (LES) while a Reynolds stress constraint is enforced on the subgrid-scale (SGS) stress model for near wall regions. In this paper, CLES is used to simulate the separated flow in a channel with streamwise-periodic constrictions at Re = 10,595. The results of CLES are compared with those of Reynolds-averaged Navier-Stokes (RANS) method, LES, detached eddy simulation (DES) and previous LES results by Breuer et al. and Ziefle et al. Although a coarse grid is used, our results from the present LES, DES and CLES do not show large deviations from the reference results using much finer grid resolution. The comparison also shows that CLES performs the best among different turbulence models tested, demonstrating that the CLES provides an excellent alternative model for separated flows. Furthermore, the cross-comparisons among different CLES implementations have been carried out. Our simulation results are in favor of using the constraint from algebraic RANS model or solving the RANS model equations in the whole domain with a length scale modification according to the idea from DES.     

The effect of subgrid-scale models on the entrainment of a passive scalar in a turbulent planar jet

Classical large-eddy simulation (LES) modelling assumes that the passive subgrid-scale (SGS) models do not influence large-scale quantities, even though there is now ample evidence of this in many flows. In this work, direct numerical simulation (DNS) and large-eddy simulations of turbulent planar jets at Reynolds number Re_H = 6000 including a passive scalar with Schmidt number Sc = 0.7 are used to study the effect of several SGS models on the flow integral quantities e.g. velocity and scalar jet spreading rates. The models analysed are theSmagorinsky, dynamic Smagorinsky, shear-improved Smagorinsky and the Vreman. Detailed analysis of the thin layer bounding the turbulent and non-turbulent regions – the so-called turbulent/non-turbulent interface (TNTI) – shows that this region raises new challenges for classical SGS models. The small scales are far from equilibrium and contain a high fraction of the total kinetic energy and scalar variance, but the situation is worse for the scalar than for the velocity field. Both a-priori and a-posteriori (LES) tests show that the dynamic Smagorinsky and shear-improved models give the best results because they are able to accurately capture the correct statistics of the velocity and passive scalar fluctuations near the TNTI. The results also suggest the existence of a critical resolution Δ_x, of the order of the Taylor scale λ, which is needed for the scalar field. Coarser passive scalar LES i.e. Δ_x ≥ λ results in dramatic changes in the integral quantities. This fact is explained by the dynamics of the small scales near the jet interface.     

High-order incompressible large-eddy simulation of fully inhomogeneous turbulent flows

The subgrid-scale (SGS) eddy-viscosity model developed by Vreman [Phys. Fluids 16 (2004) 3670] and its dynamic version [Phys. Fluids 19 (2007) 065110] are tested in large-eddy simulations (LES) of the turbulent flow in an Re = 12,000 lid-driven cubical cavity by comparison to the direct numerical simulation (DNS) data of Leriche and Gavrilakis [Phys. Fluids 12 (2000) 1363]. This appears to be the first test of this class of model to flows without any homogeneous flow directions, which is typical of flows in complex geometries. Additional LES predictions at Re = 18,000 and Re = 22,000 are compared to the DNS data of Leriche [J. Sci. Comp. 27 (2006)]. The new LES framework yielded excellent agreement for both the mean velocity and Reynolds stress profiles and matches DNS data better than the more traditional Smagorinsky-based SGS models.     

不同亚格子模型在亚声速槽道流大涡模拟中的应用对比

湍流边界层流动是一种广泛存在于飞行器内部和外部的流动现象，是基础理论和模型验证的重要研究对象.能够捕捉大部分流动细节且计算量适中的大涡模拟（large-eddy simulation，LES）方法在湍流数值模拟中得到了越来越广泛的应用.文章基于格心有限差分方法，使用4阶紧致中心格式离散N-S方程无黏项，分别应用5种不同的亚格子（subgrid-scale，SGS）模型，即隐式，SM（Smagorinsky model），DSM（dynamic Smagorinsky model），WALE（wall-adapting local eddy-viscosity model）和CSM（coherent structures model），对Re = 3 000，Ma = 0.5的等温壁面槽道流动进行了大涡模拟研究.与实验值和直接数值模拟（direct numerical simulation，DNS）结果对比后发现，流场平均温度、平均密度等热力学量以及平均流向速度对亚格子模型不敏感，不适宜作为判断模型优劣的判据.亚格子模型在壁面附近的耗散越大，壁面摩擦速度以及阻力系数就越小.对于与速度相关的脉动量来说，不同模型得到的结果在壁面和脉动峰值附近误差比较大，中心线附近较小；显式模型结果在流向速度峰值处均高于参考值，而在展向和壁面法向速度脉动峰值处则均偏低.考虑显式的4种模型在壁面附近的涡黏系数分布，DSM和CSM曲线满足涡黏系数与无量纲壁面距离3次方成正比的分布规律，SM曲线斜率偏小而WALE曲线斜率偏大.      

Experimental study of velocity-scalar filtered joint density function for LES of turbulent combustion

The velocity-scalar filtered joint density function (FJDF) used in large eddy simulation (LES) of turbulent combustion is experimentally studied. Measurements are made in the fully developed region of an axisymmetric turbulent jet using an array consisting of three X-wires and resistance-wire temperature sensors. Filtering in the cross-stream and streamwise directions is realized by using the array and by invoking Taylor’s hypothesis, respectively. The means of the FJDF conditional on the subgrid-scale (SGS) turbulent kinetic energy and the SGS scalar variance at a given location range from close to joint normal to bimodal with the peaks separated in both velocity and scalar spaces, which correspond to qualitatively different mixing regimes. For close to joint normal FJDFs, the SGS fields are well mixed. For bimodal FJDFs, the conditionally filtered scalar diffusion and dissipation strongly depend on the SGS velocity and scalar, consistent with a combination of diffusion layers and plane strain in the SGS fields, which is similar to the counter-flow model for laminar flamelets. The results suggest that in LES, both mixing regimes could potentially be modeled accurately. The velocity field affects the SGS variance and the filtered scalar dissipation rate primarily by changing the degree of nonequilibrium of the SGS scalar and the SGS time scale, respectively. This study further demonstrates the importance of including velocity in mixing models.     

Large-eddy simulation of MILD combustion using partially stirred reactor approach

Subgrid-scale (SGS) parameterization and method for calculating filtered reaction rate are critical components of an accurate large-eddy simulation (LES) of turbulent flames. In this study, we integrate gradient-type structural SGS models with a partially stirred reactor approach by using detailed chemical kinetics to simulate a turbulent methane/hydrogen jet flame under moderate or intense low-oxygen dilution (MILD) conditions. The study examines two oxygen dilution levels. The framework is assessed through a systematic and comprehensive comparison of temperature, and mass fractions of major and minor species with experimental data and other reference simulation results. Overall, the statistics of the combustion field show excellent agreement with measurements at different axial locations, and a significant improvement compared to some previous simulations. It suggests that the proposed nonlinear LES framework is able to accurately model MILD combustion with reasonable computational cost.     

Large eddy simulation of a turbulent nonpremixed piloted methane jet flame (Sandia Flame D)

Large eddy simulation (LES) is conducted of the Sandia Flame D [Proc. Combust. Inst. 27 (1998) 1087, Sandia National Laboratories (2004)], which is a turbulent piloted nonpremixed methane jet flame. The subgrid scale (SGS) closure is based on the scalar filtered mass density function (SFMDF) methodology [J. Fluid Mech. 401 (1999) 85]. The SFMDF is basically the mass weighted probability density function (PDF) of the SGS scalar quantities [Turbulent Flows (2000)]. For this flame (which exhibits little local extinction), a simple flamelet model is used to relate the instantaneous composition to the mixture fraction. The modelled SFMDF transport equation is solved by a hybrid finite-difference/Monte Carlo scheme. This is the first LES of a realistic turbulent flame using the transported PDF method as the SGS closure. The results via this method capture important features of the flame as observed experimentally.     

Particle subgrid scale modelling in large-eddy simulations of particle-laden turbulence

This study is concerned with particle subgrid scale (SGS) modelling in large-eddy simulations (LESs) of particle-laden turbulence. Although many particle-laden LES studies have neglected the effect of the SGS on the particles, several particle SGS models have been proposed in the literature. In this research, the approximate deconvolution method (ADM) and the stochastic models of Fukagata et al. (Dynamics of Brownian particles in a turbulent channel flow, Heat Mass Transf. 40 (2004), 715–726) Shotorban and Mashayek (A stochastic model for particle motion in large-eddy simulation, J. Turbul. 7 (2006), 1–13) and Berrouk et al. (Stochastic modelling of inertial particle dispersion by subgrid motion for LES of high Reynolds number pipe flow, J. Turbul. 8 (2007), pp. 1–20) are analysed. The particle SGS models are assessed using both a priori and a posteriori simulations of inertial particles in a periodic box of decaying, homogeneous and isotropic turbulence with an initial Reynolds number of Re_λ = 74. The model results are compared with particle statistics from a direct numerical simulation (DNS). Particles with a large range of Stokes numbers are tested using various filter sizes and stochastic model constant values. Simulations with and without gravity are performed to evaluate the ability of the models to account for the crossing trajectory and continuity effects. The results show that ADM improves results but is only capable of recovering a portion of the SGS turbulent kinetic energy. Conversely, the stochastic models are able to recover sufficient SGS energy, but show a large range of results dependent on the Stokes number and filter size. The stochastic models generally perform best at small Stokes numbers, but are unable to predict preferential concentration.     

一种改进后的亚格子特征尺度表达式

针对大涡模拟涡粘性亚格子模式中使用网格尺度为特征尺度存在的不足,提出一种改进的亚格子特征尺度表达式,利用结合Sagaut混合尺度模式获得的改进模式与Smagorinsky模式、Germano模式和Sagaut模式等进行对比研究.时间发展混合层和中性大气边界层的大涡模拟结果表明,改进的有效亚格子特征尺度能合理反映亚格子脉动的时空分布特性,同时扩展了适用范围.在对耗散程度、流动演化过程、可解湍流强度和可解雷诺应力等方面的模拟,改进模式优于基准模式,表明亚格子脉动有效特征尺度在大涡模拟中具有一定的理论基础和广泛的应用价值.     

Dynamic subgrid scale modeling of turbulent flows using lattice-Boltzmann method

In this paper, we discuss the incorporation of dynamic subgrid scale (SGS) models in the lattice-Boltzmann method (LBM) for large-eddy simulation (LES) of turbulent flows. The use of a dynamic procedure, which involves sampling or test-filtering of super-grid turbulence dynamics and subsequent use of scale-invariance for two levels, circumvents the need for empiricism in determining the magnitude of the model coefficient of the SGS models. We employ the multiple relaxation times (MRT) formulation of LBM with a forcing term, which has improved physical fidelity and numerical stability achieved by proper separation of relaxation time scales of hydrodynamic and non-hydrodynamic modes, for simulation of the grid-filtered dynamics of large-eddies. The dynamic procedure is illustrated for use with the common Smagorinsky eddy-viscosity SGS model, and incorporated in the LBM kinetic approach through effective relaxation time scales. The strain rate tensor in the SGS model is locally computed by means of non-equilibrium moments of the MRT-LBM. We also discuss proper sampling techniques or test-filters that facilitate implementation of dynamic models in the LBM. For accommodating variable resolutions, we employ conservative, locally refined grids in this framework. As examples, we consider the canonical anisotropic and inhomogeneous turbulent flow problem, i.e. fully-developed turbulent channel flow at two different shear Reynolds numbers Re_∗ of 180 and 395. The approach is able to automatically and self-consistently compute the values of the Smagorinsky coefficient, C_S. In particular, the computed value in the outer or bulk flow region, where turbulence is generally more isotropic, is about 0.155 (or the model coefficient ) which is in good agreement with prior data. It is also shown that the model coefficient becomes smaller and approaches towards zero near walls, reflecting the dampening of turbulent length scales near walls. The computed turbulence statistics at these Reynolds numbers are also in good agreement with prior data. The paper also discusses a procedure for incorporation of more general scale-similarity based SGS stress models.     

Relevance of the subgrid-scales for large eddy simulations of turbulence-radiation interactions in a turbulent plane jet

An a priori study based on direct numerical simulation (DNS) of a non-isothermal turbulent plane jet has been carried out in order to analyse the role of the small-scales of turbulence on thermal radiation. Filtered DNS and large eddy simulation (LES) without subgrid-scale (SGS) model have been estimated for the radiative heat transfer. The comparison of the results highlights the subgrid-scale influence over the filtered radiation quantities, such as the radiative intensity and the radiative emission. The influence of the optical thickness is also studied. It is shown that the subgrid-scales are not significant near the centerline of the jet, where the radiative heat transfer is more important, and therefore that the SGS can be neglected in this configuration. However, when the optical thickness increases, the SGS become relevant and SGS modeling may be needed.     

二维槽道湍流拟序结构的大涡模拟

本文采用大涡模拟的方法,对二维槽道湍流流动进行了数值模拟。采用Chorin的分步投影法求解大尺度涡运动的Navier-Stokes方程,小尺度涡采用三种亚格子（SGS）模式分别模拟,给出了不同亚格子涡粘性模式下的模拟结果。对固壁面采用了壁函数。模拟结果再现了二维槽道流动拟序结构的发展演变过程。通过对不同入口速度下的瞬态流场的比较,揭示了入口速度分布对流场的影响。