A screening strategy for the development of enantiomeric separation methods in capillary electrophoresis

Method development of enantiomeric separations in capillary electrophoresis (CE) is a time-consuming task, since finding the appropriate chiral selector is usually a "trial and error" process. It is impossible to predict the selectivity of a selector towards a certain enantiomer. Therefore, the affinity of all selectors has to be examined one at a time. In order to speed up this process, a strategy is proposed based on simple experimental design methodology. The approach includes first a screening in function of the pH to determine the optimal migration conditions followed by a selection of the right chiral selector by means of Taguchi designs. In the approach several variables, such as the type and concentration of cyclodextrin, the concentration of buffer electrolyte, and the percentage of organic modifier, are varied simultaneously to find initial separation conditions rapidly. The resulting initial separation conditions can be optimized in further steps to be more reproducible. We discuss the results of the approach when applied on a number of selected compounds that are recently in development at Johnson & Johnson--Pharmaceutical Research and Development. Parameters, such as quality of the separation and analysis time, are evaluated to determine initial separation conditions for each compound.     

Enantioselective noncovalent synthesis of hydrogen-bonded double-rosette assemblies

The noncovalent synthesis of enantiomerically pure hydrogen-bonded assemblies (M)- and (P)-1(3).(CA)(6) is described. These dynamic assemblies are of one single handedness (M or P), but do not contain any chiral components. They are prepared by using the "chiral memory" concept: the induction of supramolecular chirality is achieved through initial assembly with chiral barbiturates, which are subsequently replaced by achiral cyanurates. This exchange process occurs quantitatively and without loss of the M or P handedness of the assemblies. Racemization studies have been used to determine an activation energy for racemization of 105.9+/-6.4 kJ mol(-1) and a half-life time to racemization of 4.5 days in benzene at 18 degrees C. Kinetic studies have provided strong evidence that the rate-determining step in the racemization process is the dissociation of the first dimelamine component 1 from the assembly 1(3).(CA)(6). In addition to this, it was found that the expelled chiral barbiturate (RBAR or SBAR) acts as a catalyst in the racemization process. Blocking the dissociation process of dimelamines 1 from assembly 1(3).(CA)(6) by covalent capture through a ring-closing metathesis (RCM) reaction produces an increase of more than two orders of magnitude in the half-life time to racemization.     

Automatic Bi trace analysis integrated in the manufacturing process of turbine blades

Summary In the manufacture of aero-engine components, auxiliary materials are used which impair mechanical properties if they are not completely removed afterwards. Taking the manufacture of turbine blades and vanes as an example, this investigation shows how the inclusion of an analysis stage in the fully-automatic production cycle makes it possible to monitor the thoroughness of the cleaning process. As indicator, the element Bi is used; the matrix consists of concentrated nitric acid with a high nickel content. Because of the imposition of a limiting value, it must be possible to determine differences in the Bi-content of 20 g/l. The main part of the paper concerns the selection of the most optimum process. The results using two types of AAS coupled with hydride generation are presented. The success of the complete system is illustrated by the summarized results.     

初中化学教材中铁钉锈蚀实验的数字化改进

针对沪教版九年级化学上册教材中的“铁钉锈蚀实验”存在反应时间长、课堂操作难、可视化程度低、控制变量难等问题,结合数字化传感技术对该实验进行一系列的探究与改进,设计了2组对比实验,通过定量测定还原铁粉在生锈过程中的耗氧量,探究钢铁锈蚀的条件以及影响钢铁锈蚀速率的因素。     

The tautomerization phenomenon of glibenclamide drug monitored by means of volumetric measurements

In this paper, we investigate the tautomerization process of glibenclamide drug by monitoring the changes in the specific volume. The density changes observed during the chemical equilibration process, carried out at a pressure of p = 10 MPa and at three different temperatures, enable us to study the kinetics of tautomerization reaction, i.e., to determine the activation energy and to recognize the real time scale of this process at various temperature conditions. The results obtained from analysis of V(sp)(t) dependencies were next compared with the kinetic data previously obtained from dielectric spectroscopy studies.     

Statistical properties of signal entropy for use in detecting changes in time series data

Detecting changes in an underlying time series model for a system is an important task in many different fields, including econometrics, geophysics and process control. Specifically, in process control, detecting model changes is often the first step for fault detection, plant‐model mismatch assessment and data quality assessment for system identification. Signal entropy, which basically measures the amount of disorder in a given signal, can, not only segment a time series, but can also determine which regions have similar underlying models. Thus, the changes between the input and output signals can be used to determine when model is no longer an accurate representation of the system by comparing the current differential entropy against the historical differential entropy. This paper presents the statistical properties of signal entropy for discrete time systems. An example of the general results is provided by determining the entropy characteristics for first‐order systems driven by white noise. As well, a change detection index is proposed to assess changes in the time series model, which is tested on an experimental system. Copyright © 2013 John Wiley & Sons, Ltd.     

Development of a solid-phase microextraction method for direct determination of pentachlorophenol in paper and board samples: Comparison with conventional extraction method

A solid-phase microextraction (SPME) method has been developed for the determination of pentachlorophenol (PCP) in paper and board samples. The analytical procedure involves direct extraction of PCP from paper and board samples and determination by gas chromatography with electron capture detection (GC-ECD). Two kinds of commercially available fibres; 100 microm polydimethylsiloxane (PDMS), apolar, and 85 microm polyacrylate (PA), quite polar, were evaluated to determine the extraction efficiency of pentachlorophenol. Parameters affecting the extraction process, such as temperature and time, were studied. Moreover, time of desorption and the effect of addition of salt were also investigated. The optimized procedure was applied to the analysis of pentachlorophenol (PCP) in five samples of virgin and recycled paper and board. The PCP content was determined by GC-ECD. To evaluate the effectiveness of the proposed method, it was compared with conventional extraction method with liquid-liquid extraction and derivatization. Detection limit of 0.015 microg/g for PCP in paper was achieved with a RSD of 14%.     

Numerical Study of a Free-Burning Argon Arc with Anode Melting

Numerical modeling of free burning arcs and their electrodes is useful for clarifying the heat transfer phenomena in the welding process and to elucidate those effects which determine the weld penetration. This paper presents predictions for a stationary welding process by the free-burning argon arc. The whole region of the welding process, namely, tungsten cathode, arc plasma and stainless steel anode is treated in a unified numerical model to take into account the close interaction between the arc plasma and the molten anode. The time dependent development of two-dimensional distributions of temperature and velocity, in the whole region of the welding process, are predicted at a current of 150 A. The weld penetration geometry as a function of time is thus predicted. It is shown also that different surface tension properties can change the direction of re-circulatory flow in the molten anode and dramatically vary the weld penetration geometry.     

Interpolation and approximation of water quality time series and process identification

Data records with equidistant time intervals are fundamental prerequisites for the development of water quality simulation models. Usually long-term water quality data time series contain missing data or data with different sampling intervals. In such cases artificial data have to be added to obtain records based on a regular time grid. Generally, this can be done by interpolation, approximation or filtering of data sets. In contrast to approximation by an analytical function, interpolation methods estimate missing data by means of measured concentration values. In this paper, methods of interpolation and approximation are applied to long-term water quality data sets with daily sampling intervals. Using such data for the water temperature and phosphate phosphorus in some shallow lakes, it was possible to identify the process of phosphate remobilisation from sediment.     

Studying Reaction Intermediates Formed at Graphenic Surfaces

We report in-situ production and detection of intermediates at graphenic surfaces, especially during alcohol oxidation. Alcohol oxidation to acid occurs on graphene oxide-coated paper surface, driven by an electrical potential, in a paper spray mass spectrometry experiment. As paper spray ionization is a fast process and the time scale matches with the reaction time scale, we were able to detect the intermediate, acetal. This is the first observation of acetal formed in surface oxidation. The process is not limited to alcohols and the reaction has been extended to aldehydes, amines, phosphenes, sugars, etc., where reaction products were detected instantaneously. By combining surface reactions with ambient ionization and mass spectrometry, we show that new insights into chemical reactions become feasible. We suggest that several other chemical transformations may be studied this way. This work opens up a new pathway for different industrially and energetically important reactions using different metal catalysts and modified substrate.

Determination of Backbone Amide Hydrogen Exchange Rates of Cytochrome c Using Partially Scrambled Electron Transfer Dissociation Data

The technological goal of hydrogen/deuterium exchange-mass spectrometry (HDX-MS) is to determine backbone amide hydrogen exchange rates. The most critical challenge to achieve this goal is obtaining the deuterium incorporation in single-amide resolution, and gas-phase fragmentation may provide a universal solution. The gas-phase fragmentation may generate the daughter ions which differ by a single amino acid and the difference in deuterium incorporations in the two analogous ions can yield the deuterium incorporation at the sub-localized site. Following the pioneering works by Jørgensen and Rand, several papers utilized the electron transfer dissociation (ETD) to determine the location of deuterium in single-amide resolution. This paper demonstrates further advancement of the strategy by determining backbone amide hydrogen exchange rates, instead of just determining deuterium incorporation at a single time point, in combination with a wide time window monitoring. A method to evaluate the effects of scrambling and to determine the exchange rates from partially scrambled HDX-ETD-MS data is described. All parent ions for ETD fragmentation were regio-selectively scrambled: The deuterium in some regions of a peptide ion was scrambled while that in the other regions was not scrambled. The method determined 31 backbone amide hydrogen exchange rates of cytochrome c in the non-scrambled regions. Good fragmentation of a parent ion, a low degree of scrambling, and a low number of exchangeable hydrogens in the preceding side chain are the important factors to determine the exchange rate. The exchange rates determined by the HDX-MS are in good agreement with those determined by NMR.

Open image in new window

Graphical Abstract ?

     

Free energy for protein folding from nonequilibrium simulations using the Jarzynski equality

The equilibrium free energy difference between two long-lived molecular species or "conformational states" of a protein (or any other molecule) can in principle be estimated by measuring the work needed to shuttle the system between them, independent of the irreversibility of the process. This is the meaning of the Jarzynski equality (JE), which we test in this paper by performing simulations that unfold a protein by pulling two atoms apart. Pulling is performed fast relative to the relaxation time of the molecule and is thus far from equilibrium. Choosing a simple protein model for which we can independently compute its equilibrium properties, we show that the free energy can be exactly and effectively estimated from nonequilibrium simulations. To do so, one must carefully and correctly determine the ensemble of states that are pulled, which is more important the farther from equilibrium one performs simulations; this highlights a potential problem in using the JE to extract the free energy from forced unfolding experiments. The results presented here also demonstrate that the free energy difference between the native and denatured states of a protein measured in solution is not always equal to the free energy profile that can be estimated from forced unfolding simulations (or experiments) using the JE.     

Optimal control of a linear unbranched chemical process with n steps: the quasi-analytical solution

In this paper we present a method to solve a constrained optimal control problem to calculate the optimal enzyme concentrations in a chemical process by considering the minimization of the transition time. The method, based on Pontryagin’s Minimum Principle, allows us to obtain the generalized solution of an $n$ -step system with an unbranched scheme and bilinear kinetic models in an almost exclusively analytical way.     

Analysis of Local Anesthetics in Biological Samples via Kinetically Calibrated Liquid-Phase Solvent Bar Micro-Extraction Combined with HPLC

In this study, a liquid-phase solvent bar micro-extraction technique was used to investigate both the extraction and back-extraction processes of the target analyte. A novel concentration curve method and a classic time curve method, used under the same experimental conditions, verified the symmetry between the extraction process (target analyte moves from sample matrix to the organic solvent-based extraction phase) and the back-extraction process (target analyte moves from organic solvent to the sample matrix), providing the basis to use the target analyte in the back-extraction process to calibrate its extraction process. A quantitative calibration can be achieved using back extraction on the target analyte from the blank sample matrix in the organic solvent. Information from the process of back extraction of the target analyte, such as the time constant a, can be directly used to calculate the initial concentration of the target analyte in the sample matrix. This new kinetic calibration method employs a liquid-phase solvent bar micro-extraction technique combined with high-performance liquid chromatography with a diode array detector (HPLC-DAD) and was successfully used to analyze three local anesthetics in biological samples; it extends the application of the kinetic calibration to HPLC-DAD and establishes a novel, simple and accurate method to determine the concentration of the free drug in biological samples and its protein-binding ratio.     

Ultrafast dynamics in DNA: "fraying" at the end of the helix

The dynamics of the electric fields in the interior of DNA are measured by using oligonucleotides in which a native base pair is replaced by a dye molecule (coumarin 102) whose emission spectrum is sensitive to the local electric field. Time-resolved measurements of the emission spectrum have been extended to a six decade time range (40 fs to 40 ns) by combining results from time-correlated photon counting, fluorescence up-conversion, and transient absorption. Recent results showed that when the reporter is placed in the center of the oligonucleotide, the dynamics are very broadly distributed over this entire time range and do not show specific time constants associated with individual processes (Andreatta, D.; et al. J. Am. Chem. Soc. 2005, 127, 7270). This paper examines an oligonucleotide with the reporter near its end. The broadly distributed relaxation seen before remains with little attenuation. In addition, a new relaxation with a well-defined relaxation time of 5 ps appears. This process is assigned to the rapid component of "fraying" at the end of the helix.     

Influence of injector bypass on lifetime of small-particle liquid chromatographic columns

Summary In the case of liquid chromatography columns packed with small (3–5 m) particles and utilized at relatively high flow rates, pressure pulses associated with the sample injection process (caused by a short-duration interruption in mobile phase flow to the column during injection) may result in a reduction of column lifetime. This detrimental effect can be eliminated by the utilization of specially constructed sample injection valves incorporating properly desinged bypass loops. The paper investigates in detail the effect of pressure pulses, describes the criteria and performance of the bypass systems, and documents column life time and performance.Dedicated to Dr. L. S. Ettre on the occasion of his sixtieth birghday.     

A Mathematical Model for Photopolymerization From a Stationary Laser Light Source

Summary: A mathematical model of photopolymerization is presented for a stationary laser. Termination by radical combination and radical trapping is considered. Using simplifying assumptions, we derive analytical equations for the concentration of photoinitiator and monomer in the system. With these equations, we show that the light intensity and the initial amount of photoinitiator highly influence the polymerization process and determine the shape of the polymer that is formed. We also provide an analytic expression to determine the amount of polymer formed during dark reactions.

Percent conversion of monomer as a function of time at z = 0 and r = 0 (Data from Table 1 ).     

Trace of the interesting "V"-shaped dynamic mechanism of interactions between water and ionic liquids

The mixture of ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate, bmimBF4) and water (2.5%, molar fraction) under isothermal conditions at 80 degrees C was investigated by FTIR spectroscopy and two-dimensional correlation infrared spectroscopy (2D-IR) methods. Three regions were focused: the OH stretching band of water (3755-3300 cm (-1)), the stretching band of CH on the imidazole ring (3300-3020 cm (-1)), and the BF stretching band of anions (1310-1260 cm (-1)). During this process, water was gradually evaporated as time passed, which produced influences on the interactions among cations, anions, and water molecules. In the FTIR analysis, we found an interesting "V"-shaped changing trend in peak areas of the C-H on the imidazole ring and the B-F stretching band; the inflection of the system was 913 s, gained through the "moving window" method. A two-step variation was accordingly found during this process. Hydrogen bonds formed by water molecules with cations or water molecules with anions were destroyed by the reduction of water, making a fall in the former period of "V" process, while electrostatic interactions newly formed between anions and cations leading to a rise during the latter period of this course. In this paper, various conformations formed among cations, anions, and water molecules were clearly assigned, and we managed to trace the whole dynamic mechanism of this isothermal process by 2D-IR techniques.     

Kinetic study of ion exchange reaction between lysozyme and carboxymethyl Sephadex C-25

The ion-exchange reaction of lysozyme with carboxymethyl Sephadex C-25 was followed by conductivity change as a function of time just after the rapid mixing of the protein solution with the Sephadex suspension. A single relaxation process was observed; the conductivity increased exponentially with time in the 100 s scale. In this process, protons were released from the Sephadex C-25 in the same time scale. The relaxation process slowed down with an increase in the lysozyme concentration, but it quickened upon the addition of HCl. On the other hand, the potential on the Sephadex C-25 surface changed from a negative value to a positive one with an increase in the amount of lysozyme adsorbed on the surface. On the basis of these data, the relaxation process was attributed to the ion-exchange reaction of lysozyme with several protons of carboxymethyl groups of the Sephadex.     

Application of synchronous fluorescence scan spectroscopy for size dependent simultaneous analysis of CdTe nanocrystals and their mixtures

In this paper, synchronous fluorescence scan (SFS) spectroscopy has been applied for the first time for the simultaneous determination of a mixture of CdTe fluorescent nanocrystals (NCs) of various sizes without a pre-separation step. It is observed that synchronous fluorescence maximum correlates well with the size of the nanocrystals, i.e.; the is useful to determine size dependency of NCs. Synchronous fluorescence maximum along with the second derivative can identify individual NCs in a mixture in water. The method is found to be simple, sensitive, selective and fast for NCs determination in aqueous media.