Bis(dithiolene)molybdenum analogues relevant to the DMSO reductase enzyme family: synthesis, structures, and oxygen atom transfer reactions and kinetics.

A series of dithiolene complexes of the general type [Mo(IV)(QR')(S(2)C(2)Me(2))(2)](1)(-) has been prepared and structurally characterized as possible structural and reactivity analogues of reduced sites of the enzymes DMSOR and TMAOR (QR' = PhO(-), 2-AdO(-), Pr(i)()O(-)), dissimilatory nitrate reductase (QR' = 2-AdS(-)), and formate dehydrogenase (QR' = 2-AdSe(-)). The complexes are square pyramidal with the molybdenum atom positioned 0.74-0.80 A above the S(4) mean plane toward axial ligand QR'. In part on the basis of a recent clarification of the active site of oxidized Rhodobacter sphaeroides DMSOR (Li, H.-K.; Temple, C.; Rajagopalan, K. V.; Schindelin, H. J. Am. Chem. Soc. 2000, 122, 7673), we have adopted the minimal reaction paradigm Mo(IV) + XO right arrow over left arrow Mo(VI)O + X involving desoxo Mo(IV), monooxo Mo(VI), and substrate/product XO/X for direct oxygen atom transfer of DMSOR and TMAOR enzymes. The [Mo(OR')(S(2)C(2)Me(2))(2)](1)(-) species carry dithiolene and anionic oxygen ligands intended to simulate cofactor ligand and serinate binding in DMSOR and TMAOR catalytic sites. In systems with N-oxide and S-oxide substrates, the observed overall reaction sequence is [Mo(IV)(OR')(S(2)C(2)Me(2))(2)](1)(-) + XO --> [Mo(VI)O(OR')(S(2)C(2)Me(2))(2)](1)(-) --> [Mo(V)O(S(2)C(2)Me(2))(2)](1)(-). Direct oxo transfer in the first step has been proven by isotope labeling. The reactivity of [Mo(OPh)(S(2)C(2)Me(2))(2)](1)(-) (1) has been the most extensively studied. In second-order reactions, 1 reduces DMSO and (CH(2))(4)SO (k(2) approximately 10(-)(6), 10(-)(4) M(-)(1) s(-)(1); DeltaS(double dagger) = -36, -39 eu) and Me(3)NO (k(2) = 200 M(-)(1) s(-)(1); DeltaS(double dagger) = -21 eu) in acetonitrile at 298 K. Activation entropies indicate an associative transition state, which from relative rates and substrate properties is inferred to be concerted with X-O bond weakening and Mo-O bond making. The Mo(VI)O product in the first step, such as [Mo(VI)O(OR')(S(2)C(2)Me(2))(2)](1)(-), is an intermediate in the overall reaction sequence, inasmuch as it is too unstable to isolate and decays by an internal redox process to a Mo(V)O product, liberating an equimolar quantity of phenol. This research affords the first analogue reaction systems of biological N-oxide and S-oxide substrates that are based on desoxo Mo(IV) complexes with biologically relevant coordination. Oxo-transfer reactions in analogue systems are substantially slower than enzyme systems based on a k(cat)/K(M) criterion. An interpretation of this behavior requires more information on the rate-limiting step(s) in enzyme catalytic cycles. (2-Ad = 2-adamantyl, DMSOR = dimethyl sulfoxide reductase, TMAOR = trimethylamine N-oxide reductase)     

Oxo transfer reactions mediated by bis(dithiolene)tungsten analogues of the active sites of molybdoenzymes in the DMSO reductase family: comparative reactivity of tungsten and molybdenum.

The discovery of tungsten enzymes and molybdenum/tungsten isoenzymes, in which the mononuclear catalytic sites contain a metal chelated by one or two pterin-dithiolene cofactor ligands, has lent new significance to tungsten-dithiolene chemistry. Reaction of [W(CO)(2)(S(2)C(2)Me(2))(2)] with RO(-) affords a series of square pyramidal desoxo complexes [W(IV)(OR')(S(2)C(2)Me(2))(2)](1)(-), including R' = Ph (1) and Pr(i)() (3). Reaction of 1 and 3 with Me(3)NO gives the cis-octahedral complexes [W(VI)O(OR')(S(2)C(2)Me(2))(2)](1)(-), including R' = Ph (6) and Pr(i)() (8). These W(IV,VI) complexes are considered unconstrained versions of protein-bound sites of DMSOR and TMAOR (DMSOR = dimethylsulfoxide reductase, TMAOR = trimethylamine N-oxide reductase) members of the title enzyme family. The structure of 6 and the catalytic center of one DMSO reductase isoenzyme have similar overall stereochemistry and comparable bond lengths. The minimal oxo transfer reaction paradigm thought to apply to enzymes, W(IV) + XO --> W(VI)O + X, has been investigated. Direct oxo transfer was demonstrated by isotope transfer from Ph(2)Se(18)O. Complex 1 reacts cleanly and completely with various substrates XO to afford 6 and product X in second-order reactions with associative transition states. The substrate reactivity order with 1 is Me(3)NO > Ph(3)AsO > pyO (pyridine N-oxide) > R(2)SO > Ph(3)PO. For reaction of 3 with Me(3)NO, k(2) = 0.93 M(-)(1) s(-)(1), and for 1 with Me(2)SO, k(2) = 3.9 x 10(-)(5) M(-)(1) s(-)(1); other rate constants and activation parameters are reported. These results demonstrate that bis(dithiolene)W(IV) complexes are competent to reduce both N-oxides and S-oxides; DMSORs reduce both substrate types, but TMAORs are reported to reduce only N-oxides. Comparison of k(cat)/K(M) data for isoenzymes and k(2) values for isostructural analogue complexes reveals that catalytic and stoichiometric oxo transfer, respectively, from substrate to metal is faster with tungsten and from metal to substrate is faster with molybdenum. These results constitute a kinetic metal effect in direct oxo transfer reactions for analogue complexes and for isoenzymes provided the catalytic sites are isostructural. The nature of the transition state in oxo transfer reactions of analogues is tentatively considered. This research presents the first kinetics study of substrate reduction via oxo transfer mediated by bis(dithiolene)tungsten complexes.     

Monodithiolene molybdenum(V, VI) complexes: a structural analogue of the oxidized active site of the sulfite oxidase enzyme family

The active sites of the xanthine oxidase and sulfite oxidase enzyme families contain one pterin-dithiolene cofactor ligand bound to a molybdenum atom. Consequently, monodithiolene molybdenum complexes have been sought by exploratory synthesis for structural and reactivity studies. Reaction of [MoO(S(2)C(2)Me(2))(2)](1-) or [MoO(bdt)(2)](1-) with PhSeCl results in removal of one dithiolate ligand and formation of [MoOCl(2)(S(2)C(2)Me(2))](1-) (1) or [MoOCl(2)(bdt)](1-) (2), which undergoes ligand substitution reactions to form other monodithiolene complexes [MoO(2-AdS)(2)(S(2)C(2)Me(2))](1-) (3), [MoO(SR)(2)(bdt)](1-) (R = 2-Ad (4), 2,4,6-Pr(i)(3)C(6)H(2) (5)), and [MoOCl(SC(6)H(2)-2,4,6-Pr(i)(3))(bdt)](1-) (6) (Ad = 2-adamantyl, bdt = benzene-1,2-dithiolate). These complexes have square pyramidal structures with apical oxo ligands, exhibit rhombic EPR spectra, and 3-5 are electrochemically reducible to Mo(IV)O species. Complexes 1-6 constitute the first examples of five-coordinate monodithiolene Mo(V)O complexes; 6 approaches the proposed structure of the high-pH form of sulfite oxidase. Treatment of [MoO(2)(OSiPh(3))(2)] with Li(2)(bdt) in THF affords [MoO(2)(OSiPh(3))(bdt)](1-) (8). Reaction of 8 with 2,4,6-Pr(i)(3)C(6)H(2)SH in acetonitrile gives [MoO(2)(SC(6)H(2)-2,4,6-Pr(i)(3))(bdt)](1-) (9, 55%). Complexes 8 and 9 are square pyramidal with apical and basal oxo ligands. With one dithiolene and one thiolate ligand of a square pyramidal Mo(VI)O(2)S(3) coordination unit, 9 closely resembles the oxidized sites in sulfite oxidase and assimilatory nitrate reductase as deduced from crystallography (sulfite oxidase) and Mo EXAFS. The complex is the first structural analogue of the active sites in fully oxidized members of the sulfite oxidase family. This work provides a starting point for the development of both structural and reactivity analogues of members of this family.     

Oxomolybdenum tetrathiolates with sterically encumbering ligands: modeling the effect of a protein matrix on electronic structure and reduction potentials

The effect of sterically encumbering ligands on the electronic structure of oxomolybdenum tetrathiolate complexes was determined using a combination of electronic absorption and magnetic circular dichroism spectroscopies, complimented by DFT bonding calculations, to understand geometric and electronic structure contributions to reduction potentials. These complexes are rudimentary models for a redox-active metalloenzyme active site in a protein matrix and allow for detailed spectroscopic probing of specific oxomolybdenum-thiolate interactions that are directly relevant to Mo-S(cysteine) bonding in pyranopterin molybdenum enzymes. Data are presented for three para-substituted oxomolybdenum tetrathiolate complexes ([PPh4][MoO(p-SPhCONHCH3)4], [PPh4][MoO(p-SPhCONHC(CH2O(CH2)2CN)3)4], and [PPh4][MoO(p-SPhCONHC(CH2O(CH2)2COOCH2CH3)3)4]). The Mo(V/IV) reduction potentials of the complexes in DMF are -1213, -1251, and -1247 mV, respectively. The remarkably similar electronic absorption and magnetic circular dichroism spectra of these complexes establish that the observed reduction potential differences are not a result of significant changes in the electronic structure of the [MoOS4]- cores as a function of the larger ligand size. We provide evidence that these reduction potential differences result from the driving force for a substantial reorganization of the O-Mo-S-C dihedral angle upon reduction, which decreases electron donation from the thiolate sulfurs to the reduced molybdenum center. The energy barrier to favorable O-Mo-S-C geometries results in a reorganizational energy increase, relative to [MoO(SPh)4](-/2-), that correlates with ligand size. The inherent flexible nature of oxomolybdenum-thiolate bonds indicate that thiolate ligand geometry, which controls Mo-S covalency, could affect the redox processes of monooxomolybdenum centers in pyranopterin molybdenum enzymes.     

Synthesis and structures of bis(dithiolene)molybdenum complexes related to the active sites of the DMSO reductase enzyme family

Structural analogues of the reduced (Mo(IV)) sites of members of the DMSO reductase family of molybdoenzymes are sought. These sites usually contain two pterin-dithiolene cofactor ligands and one protein-based ligand. Reaction of [Mo(MeCN)3(CO)3] and [Ni(S2C2R2)2] affords the trigonal prismatic complexes [Mo(CO)2(S2C2R2)2] (R = Me (1), Ph (2)), which by carbonyl substitution serve as useful precursors to a variety of bis(dithiolene)molybdenum-(IV,V) complexes. Reaction of 1 with Et4NOH yields [MoO(S2C2Me2)2]2- (3), which is readily oxidized to [MoO(S2C2Me2)2]1- (4). The hindered arene oxide ligands ArO- afford the square pyramidal complexes [Mo(OAr)(S2C2R2)2]1- (5, 6). The ligands PhQ- affordthe trigonal prismatic monocarbonyls [Mo(CO)(QPh)(S2C2Me2)2]1- (Q = S (8), Se (12)) while the bulky ligand ArS- forms square pyramidal [Mo(SAr)(S2C2R2)2]- (9, 10). In contrast, reactions with ArSe- result in [Mo(CO)(SeAr)(S2C2R2)2]1-(14, 15), which have not been successfully decarbonylated. Other compounds prepared by substitution reactions of 1 and 2 include the bridged dimers [Mo2(mu-Q)2(S2C2Me2)4]2- (Q = S (7), Se (11)) and [Mo2(mu-SePh)2(S2C2Ph2)4]2- (13). The complexes 1, 3-5, 7-10, 12-14, [Mo(S2C2Me2)3] (16), and [Mo(S2C2Me2)3]1- (17) were characterized by X-ray structure determinations. Certain complexes approach the binding arrangements in at least one DMSO reductase (5/6) and its Ser/Cys mutant, and in dissimilatory nitrate reductases (9/10). This investigation provides the initial demonstration of the new types of bis(dithiolene)molybdenum(IV) complexes available through [Mo(CO)2(S2C2R2)2] precursors, some of which will be utilized in reactivity studies. (Ar = 2,6-diisopropylphenyl or 2,4,6-triisopropylphenyl.)     

Synthesis and structures of bis(dithiolene)-tungsten(IV) complexes related to the active sites of tungstoenzymes

Recent protein crystallographic results on tungsten enzymes and primary sequence relationships between certain molybdenum and tungsten enzymes provoke interest in the generalized bis(dithiolene) complexes [WIV(QR)(S2C2R'2)2]1- and [WVIO(QR)(S2C2R'2)2]1- (Q = O, S, Se) as minimal representations of enzyme sites. The existence and stability of W(IV) complexes have been explored by synthesis. Reaction of [W(CO)2(S2C2Me2)2] (1) with PhO- results in complete CO substitution to give [W(OPh)(S2C2Me2)2]1- (2). Reaction of 1 with PhQ- affords the monocarbonyls [W(CO)(QPh)(S2C2Me2)2]1- (Q = S (3), Se (5)). The use of sterically demanding 2,4,6-Pri3C6H2Q- also yields monocarbonyls, [W(CO)(QC6H2-2,4,6-Pri3)(S2C2Me2)2]1- (Q = S (4), Se (6)). The X-ray structures of square pyramidal 2 and trigonal prismatic 3-6 (with unidentate ligands cis) are described. The tendency to substitute one or both carbonyl ligands in 1 in the formation of [MIV(QAr)(S2C2Me2)2]1- and [MIV(CO)(QAr)(SeC2Me2)2]1- with M = Mo and W is related to the M-Q bond length and ligand steric demands. The results demonstrate a stronger binding of CO by W(IV) than Mo(IV), a behavior previously demonstrated by thermodynamic and kinetic features of zerovalent carbonyl complexes. Complexes 3-6 can be reversibly reduced to W(III) at approximately -1.5 V versus SCE. On the basis of the potential for 2(-2.07 V), monocarbonyl ligation stabilizes W(III) by approximately 500 mV. This work is part of a parallel investigation of the chemistry of bis(dithiolene)-molybdenum (Lim, B. S.; Donahue, J. P.; Holm, R. H. Inorg. Chem. 2000, 39, 263) and -tungsten complexes related to enzyme active sites.     

Understanding the origin of metal-sulfur vibrations in an oxo-molybdenum dithiolene complex: relevance to sulfite oxidase

X-ray crystallography and resonance Raman (rR) spectroscopy have been used to further characterize (Tp*)MoO(qdt) (Tp* is hydrotris(3,5-dimethyl-1-pyrazolyl)borate and qdt is 2,3-quinoxalinedithiolene), which represents an important benchmark oxomolybdenum mono-dithiolene model system relevant to various pyranopterin Mo enzyme active sites, including sulfite oxidase. The compound (Tp*)MoO(qdt) crystallizes in the triclinic space group, P1, where a = 9.8424 (7) A, b = 11.2323 (8) A, c = 11.9408 (8) A, alpha = 92.7560 (10) degrees, beta = 98.9530 (10) degrees, and gamma = 104.1680 (10) degrees. The (Tp*)MoO(qdt) molecule exhibits the distorted six-coordinate geometry characteristic of related oxo-Mo(V) systems possessing a single coordinated dithiolene ligand. The first coordination sphere bond lengths and angles in (Tp*)MoO(qdt) are very similar to the corresponding structural parameters for (Tp*)MoO(bdt) (bdt is 1,2-benzenedithiolene). The relatively small inner-sphere structural variations observed between (Tp*)MoO(qdt) and (Tp*)MoO(bdt) strongly suggest that geometric effects are not a major contributor to the significant electronic structural differences reported for these two oxo-Mo(V) dithiolenes. Therefore, the large differences observed in the reduction potential and first ionization energy between the two molecules appear to derive primarily from differences in the effective nuclear charges of their respective sulfur donors. However, a subtle perturbation to Mo-S bonding is implied by the nonplanarity of the dithiolene chelate ring, which is defined by the fold angle. This angular distortion (theta = 29.5 degrees in (Tp*)MoO(qdt); 21.3 degrees in (Tp*)MoO(bdt)) observed between the MoS2 and S-C=C-S planes may contribute to the electronic structure of these oxo-Mo dithiolene systems by controlling the extent of S p-Mo d orbital overlap. In enzymes, the fold angle may be dynamically modulated by the pyranopterin, thereby functioning as a transducer of vibrational energy associated with protein conformational changes directly to the active site via changes in the fold angle. This process could effectively mediate charge redistribution at the active site during the course of atom- and electron-transfer processes. The rR spectrum shows bands at 348 and 407 cm(-1). From frequency analysis of the normal modes of the model, [(NH3)3MoO(qdt)]1+, using the Gaussian03 suite of programs, these bands are assigned as mixed-mode Mo-S vibrations of the five-membered Mo-ditholene core structure. Raman spectroscopy has also provided additional evidence for an in-plane pseudo-sigma dithiolene S-Mo d(xy) covalent bonding interaction in (Tp*)MoO(qdt) and related oxo-Mo-dithiolenes that has implications for electron-transfer regeneration of the active site in sulfite oxidase involving the pyranopterin dithiolene.     

Phosphine-substituted dithiolene complexes as ligands: communication between ruthenium(II) centers through a dimolybdenum bis(dithiolene) core

The reaction of Mo2(SCH2CH2S)2Cp2 (1; Cp=eta-C5H5) with an excess of an alkyne in refluxing dichloromethane affords the bis(dithiolene) complexes Mo2(micro-SCR1=CR2S)2Cp2 (2a, R1=R2=CO2Me; 2b, R1=R2=Ph; 2c, R1=H, R2=CO2Me) whereas with 1 equiv of alkyne at room temperature the mixed dithiolene-dithiolate species Mo2(micro-SCR1=CR2S)(micro-SCH2CH2S)Cp2 (3a, R1=R2=CO2Me; 3b, R1=R2=Ph) are formed. The remaining dithiolate ligand in 3 can then be converted into a different dithiolene by reaction with a second alkyne. Applying this methodology, we have used bis(diphenylphosphino)acetylene to prepare the first examples of complexes containing phosphine-substituted dithiolene ligands: Mo2{micro-SC(CO2Me)=C(CO2Me)S}{micro-SC(PPh2)=C(PPh2)S}Cp2 (2g) and Mo2{micro-SC(PPh2)=C(PPh2)S}2Cp2 (2h). Tri- and tetrametallic complexes can then be assembled by coordination of these diphosphines to CpRuCl units by reaction with CpRu(PPh3)2Cl. Electrochemical studies of the Ru(II)/Ru(III) couple in Mo2{micro-SC(PPh2)=C(PPh2)S}2Cp2(RuClCp)2 (4b) reveals that the two separate ruthenium centers are oxidized electrochemically at different potentials, demonstrating communication between them through the dimolybdenum bis(dithiolene) core. Density functional theory calculations were carried out to explore the electronic structures of these species and to predict and assign their electronic spectra.     

Synthesis and characterisation of second-generation metallodithiolene complexes of the type [Tp*ME(dithiolene)](M=Mo, W; E=O, S) and a novel 'organoscorpionate' complex of tungsten

Paramagnetic, chalcogenido-M(v) dithiolene complexes, [Tp*ME{S2C2(CO2Me)2}][M=Mo, E=O, S; M=W, E=O, S; Tp*=hydrotris(3,5-dimethylpyrazol-1-yl)borate] are generated in the reactions of dimethyl acetylenedicarboxylate (DMAC) and the sulfur-rich complexes NEt4[Tp*MoS(S4)] and NEt4[Tp*WS3]; the oxo complexes result from hydrolysis of the initial sulfido products. As well, a novel 'organoscorpionate' complex, [W{S2C2(CO2Me)2}{SC2(CO2Me)2-Tp*}], has been isolated from the reactions of NEt4[Tp*WS3] with excess DMAC. Complexes , and have been isolated and characterised by microanalytical, mass spectrometric, spectroscopic and (for and) X-ray crystallographic techniques. Complexes and have been partially characterised by mass spectrometry and IR and EPR spectroscopy. Six-coordinate, distorted-octahedral contains a terminal sulfido ligand (W=S=2.108(3)A), a bidentate dithiolene ligand (S-Cav=1.758 A, C=C=1.332(10)A) and a fac-tridentate Tp* ligand. Seven-coordinate contains a planar, bidentate dithiolene ligand (S-Cav=1.746 A, C=C=1.359(5)A) and a novel pentadentate 'organoscorpionate' ligand formed by the melding of DMAC, sulfido and trispyrazolylborate units. The latter is coordinated through two pyrazolyl N atoms (kappa2-N,N') and a tridentate kappa3-S,C,C' unit appended to N-beta of the third (uncoordinated) pyrazolyl group. The second-generation [Tp*ME(dithiolene)] complexes represent a refinement on first-generation [Tp*ME(arene-1,2-dithiolate)] complexes and their synthesis affords an opportunity to compare and contrast the electronic structures of true vs. pseudo-dithiolene ligands in otherwise analogous complexes.     

X-ray spectroscopy of enzyme active site analogues and related molecules: bis(dithiolene)molybdenum(IV) and -tungsten(IV,VI) complexes with variant terminal ligands

The X-ray absorption spectra at the molybdenum and selenium K-edges and the tungsten L2,3-edges are acquired for a set of 14 Mo(IV) and W(IV,VI) bis(dithiolene) complexes related to the active sites of molybdo- and tungstoenzymes. The set includes square pyramidal [MoIVL(S2C2Me2)2]- (L = O2-, R3SiO-, RO-, RS-, RSe-) and [WIV(OR)(S2C2Me2)2]-, distorted trigonal prismatic [MoIV(CO)(SeR)(S2C2Me2)2]- and [WIV(CO)L(S2C2Me2)2]- (L = RS-, RSe-), and distorted octahedral [WVIO(OR)(S2C2Me2)2]-. The dithiolene simulates the pterin-dithiolene cofactor ligand, and L represents a protein ligand. Bond lengths are determined by EXAFS analysis using the GNXAS protocol. Normalized edge spectra, non-phase-shift-corrected Fourier transforms, and EXAFS data and fits are presented. Bond lengths determined by EXAFS and X-ray crystallography agree to < or = 0.02 A as do the M-Se distances determined by both metal and selenium EXAFS. The complexes [MoIV(QR)(S2C2Me2)2]- simulate protein ligation by the DMSO reductase family of enzymes, including DMSO reductase itself (Q = O), dissimilatory nitrate reductase (Q = S), and formate dehydrogenase (Q = Se). Edge shifts of these complexes correlate with the ligand electronegativities. Terminal ligand binding is clearly distinguished in the presence of four Mo-S(dithiolene) interactions. Similarly, five-coordinate [ML(S2C2Me2)2]- and six-coordinate [M(CO)L(S2C2Me2)2]- are distinguishable by edge and EXAFS spectra. This study expands a previous XAS investigation of bis(dithiolene)metal(IV,V,VI) complexes (Musgrave, K. B.; Donahue, J. P.; Lorber, C.; Holm, R. H.; Hedman, B.; Hodgson, K. O. J. Am. Chem. Soc. 1999, 121, 10297) by including a larger inventory of molecules with variant physiologically relevant terminal ligation. The previous and present XAS results should prove useful in characterizing and refining metric features and structures of enzyme sites.     

Analogue reaction systems of selenate reductase

Analogue reaction systems of selenate reductase, which reduces substrate in the overall enzymatic reaction SeO4(2-) + 2H+ + 2e- --> SeO3(2-) + H2O, have been developed using bis(dithiolene) complexes of Mo(IV) and W(IV). On the basis of the results of EXAFS analysis of the oxidized and reduced enzyme, the minimal reaction Mo(IV)OH + SeO4(2-) --> Mo(VI)O(OH) + SeO3(2-) is probable. The square pyramidal complexes [M(OMe)(S2C2Me2)2](1-) (M = Mo, W) were prepared as structural analogues of the reduced enzyme site. The systems, [ML(S2C2Me2)2](1-)/SeO4(2-) (L = OMe, OPh, SC6H2-2,4,6-Pr(i)3) in acetonitrile, cleanly reduce selenate to selenite in second-order reactions whose negative entropies of activation implicate associative transition states. Rate constants at 298 K are in the 10(-2)-10(-4) M(-1) s(-1) range with DeltaS++ = -12 to -34 eu. When rate constants are compared with previous data for the reduction of (CH2)4SO, Ph3AsO, and nitrate by oxygen atom transfer, reactivity trends dependent on the metal, axial ligand L, and substrate are identified. As in all other cases of substrate reduction by oxo transfer, the kinetic metal effect k(2)W > k(2)Mo holds. A proposal from primary sequence alignments suggesting that a conserved Asp residue is a likely ligand in the type II enzymes in the DMSO reductase family has been pursued by synthesis of the [Mo(IV)(O2CR)(S2C2Me2)2](1-) (R = Ph, Bu(t)) complexes. The species display symmetrical eta2-carboxylate binding and distorted trigonal prismatic stereochemistry. They serve as possible structural analogues of the reduced sites of nitrate, selenate, and perchlorate reductases under the proposed aspartate coordination. Carboxylate binding has been crystallographically demonstrated for one nitrate reductase, but not for the other two enzymes.     

Formation of mono(dithiolene)-thiocarboxamido complexes in reactions of thio(dithiocarbamato)-Mo/W complexes and dimethyl acetylenedicarboxylate

Reactions of TpMS(S(2)CNEt(2)) with dimethyl acetylenedicarboxylate in dichloromethane produce olive green/black TpM{S(2)C(2)(CO(2)Me)(2)}(SCNEt(2)-kappa(2)S,C) (M = Mo (1), W (2); Tp = hydrotris(3,5-dimethylpyrazol-1-yl)borate). The seven-coordinate complexes exhibit pseudo-octahedral (1) and distorted pentagonal bipyramidal (2) coordination spheres comprised of tridentate fac-Tp, bidentate dithiolene, and thiocarboxamido-kappa(2)S,C ligands. In the solid state, molecules of 1 exhibit pseudo-C(s)() symmetry, with the thiocarboxamide NEt(2) group in a cleft in the Tp ligand. Molecules of 2 have C(1) symmetry in the solid state; here, the thiocarboxamide unit is orientated along one of the W-S(dithiolene) bonds with its NEt(2) group projecting away from the Tp ligand. Both complexes possess effective C(s)() symmetry in solution. Reaction of TpMoI(CO)(3) with AgS(2)CNEt(2) affords olive green TpMo(S(2)CNEt(2))(CO)(2) (3), which reacts with propylene sulfide in a new synthesis for TpMoS(S(2)CNEt(2)), the starting material for 1. Complex 3 exhibits a distorted pentagonal bipyramidal structure, the axial sites being defined by a Tp nitrogen atom and a carbonyl ligand, the pentagonal plane by the remaining nitrogen and carbonyl donors and the two sulfur atoms of the bidentate dithiocarbamate ligand.     

Chalcogenidobis(ene-1,2-dithiolate)molybdenum(IV) complexes (chalcogenide E = O, S, Se): probing Mo≡E and ene-1,2-dithiolate substituent effects on geometric and electronic structure

New square-pyramidal bis(ene-1,2-dithiolate)MoSe complexes, [Mo(IV)Se(L)(2)](2-), have been synthesised along with their terminal sulfido analogues, [Mo(IV)S(L)(2)](2-), using alkyl (L(C(4)H(8))), phenyl (L(Ph)) and methyl carboxylate (L(COOMe)) substituted dithiolene ligands (L). These complexes now complete three sets of Mo(IV)O, Mo(IV)S and Mo(IV)Se species that are coordinated with identical ene-1,2-dithiolate ligands. The [alkyl substituted Mo(S/Se)(L(C(4)H(8)))(2)](2-) complexes were reported in prior investigations (H. Sugimoto, T. Sakurai, H. Miyake, K. Tanaka and H. Tsukube, Inorg. Chem. 2005, 44, 6927, H. Tano, R. Tajima, H. Miyake, S. Itoh and H. Sugimoto, Inorg. Chem. 2008, 47, 7465). The new series of complexes enable a systematic investigation of terminal chalcogenido and supporting ene-1,2-dithiolate ligand effects on geometric structure, electronic structure, and spectroscopic properties. X-ray crystallographic analysis of these (Et(4)N)(2)[MoEL(2)] (E = terminal chalocogenide) complexes reveals an isostructural Mo centre that adopts a distorted square pyramidal geometry. The M≡E bond distances observed in the crystal structures and the ν(M≡E) vibrational frequencies indicate that these bonds are weakened with an increase in L→Mo electron donation (L(COOMe) < L(Ph) < L(C(4)H(8))), and this order is confirmed by an electrochemical study of the complexes. The (77)Se NMR resonances in MoSeL complexes appear at lower magnetic fields as the selenido ion became less basic from MoSeL(C(4)H(8)), MoSeL(Ph) and MoSeL(COOMe). Electronic absorption and resonance Raman spectroscopies have been used to assign key ligand-field, MLCT, LMCT and intraligand CT bands in complexes that possess the L(COOMe) ligand. The presence of low-energy intraligand CT transition in these MoEL(COOMe) compounds directly probes the electron withdrawing nature of the -COOMe substituents, and this underscores the complex electronic structure of square pyramidal bis(ene-1,2-dithiolate)-Mo(IV) complexes that possess extended dithiolene conjugation.     

Oxo/sulfidotungstate(VI) as precursors to W(VI)O2, W(VI)OS, and W(VI)S2 complexes and W(IV)-dithiolene chelate rings

Synthetic models leading to oxosulfidotungsten(VI) groups and dithiolene chelate rings have been investigated. The heterogeneous reaction systems [WO4-nSn]2-/2Ph3SiCl/Me4phen (n = 0-2) in acetonitrile afford the complexes [WQ2(OSiPh3)2(Me4phen)] (1-3) in the indicated yields containing the groups W(VI)O2 (1; 86%), W(VI)O2 (2; 45%), and W(VI)S2 (3; 83%). In the crystalline state these complexes have imposed C2 symmetry, with cis-oxo/sulfido and trans-silyloxide ligands. 1H NMR spectra indicate that this stereochemistry is retained in solution. The colors of 2 (yellow, 367 nm) and 3 (orange, 451 nm) arise from LMCT absorptions at the indicated wavelengths. These results demonstrate that the silylation procedure previously introduced for the preparation of molecules with the Mo(VI)OS group (Thapper, et al. Inorg. Chem. 1999, 38, 4104) extends to tungsten. Methods for the formation of dithiolene chelate rings MS2C2R2 in reactions with sulfide-bound M = Mo or W precursors are summarized. In a known reaction type, 3 and activated acetylenes rapidly form [W(IV)(OSiPh3)2(Me4phen)(S2C2R2)] (R = CO2Me, 4, 83%, and Ph, 5, 98%). In a new reaction type not requiring the isolation of an intermediate, the systems [MO2S2]2-/2Ph3SiCl/Me4phen/PhC=CPh in acetonitrile afford 5 (68%) and [Mo(IV)(OSiPh3)2(Me4phen)(S2C2Ph2)] (6; 61%). Complexes 5 and 6 are isostructural, maintain the trans-silyloxide stereochemistry, and exhibit chelate ring dimensions indicative of ene- 1,2-dithiolate coordination. Reductions in the -1.4 to -1.7 V range are described as metal-centered. It remains to be seen whether the oxo/sulfidotungsten(VI) groups in 1-3 eventuate in the active sites of tungstoenzymes. (Me4phen = 3,4,7,8-tetramethyl-1,10-phenanthroline.)     

Sulfur K-edge spectroscopic investigation of second coordination sphere effects in oxomolybdenum-thiolates: relationship to molybdenum-cysteine covalency and electron transfer in sulfite oxidase

Second-coordination sphere effects such as hydrogen bonding and steric constraints that provide for specific geometric configurations play a critical role in tuning the electronic structure of metalloenzyme active sites and thus have a significant effect on their catalytic efficiency. Crystallographic characterization of vertebrate and plant sulfite oxidase (SO) suggests that an average O(oxo)-Mo-S(Cys)-C dihedral angle of approximately 77 degrees exists at the active site of these enzymes. This angle is slightly more acute (approximately 72 degrees) in the bacterial sulfite dehydrogenase (SDH) from Starkeya novella. Here we report the synthesis, crystallographic, and electronic structural characterization of Tp*MoO(mba) (where Tp* = (3,5-dimethyltrispyrazol-1-yl)borate; mba = 2-mercaptobenzyl alcohol), the first oxomolybdenum monothiolate to possess an O(ax)-Mo-S(thiolate)-C dihedral angle of approximately 90 degrees . Sulfur X-ray absorption spectroscopy clearly shows that O(ax)-Mo-S(thiolate)-C dihedral angles near 90 degrees effectively eliminate covalency contributions to the Mo(xy) redox orbital from the thiolate sulfur. Sulfur K-pre-edge X-ray absorption spectroscopy intensity ratios for the spin-allowed S(1s) --> Sv(p) + Mo(xy) and S(1s) --> Sv(p) + Mo(xz,yz) transitions have been calibrated by a direct comparison of theory with experiment to yield thiolate Sv(p) orbital contributions, c(j)(2), to the Mo(xy) redox orbital and the Mo(xz,yz) orbital set. Furthermore, these intensity ratios are related to a second coordination sphere structural parameter, the O(oxo)-Mo-S(thiolate)-C dihedral angle. The relationship between Mo-S(thiolate) and Mo-S(dithiolene) covalency in oxomolydenum systems is discussed, particularly with respect to electron-transfer regeneration in SO.     

Electronic control of the "Bailar twist" in formally d0-d2 molybdenum tris(dithiolene) complexes: a sulfur K-edge X-ray absorption spectroscopy and density functional theory study

Sulfur K-edge X-ray absorption spectroscopy (XAS) and density functional theory (DFT) calculations have been used to determine the electronic structures of a series of Mo tris(dithiolene) complexes, [Mo(mdt)3](z) (where mdt = 1,2-dimethylethene-1,2-dithiolate(2-) and z = 2-, 1-, 0), with near trigonal-prismatic geometries (D3h symmetry). These results show that the formally Mo(IV), Mo(V), and Mo(VI) complexes actually have a (dz(2))(2) configuration, that is, remain effectively Mo(IV) despite oxidation. Comparisons with the XAS data of another set of Mo tris(dithiolene) complexes, [Mo(tbbdt)3](z) (where tbbdt = 3,5-ditert-butylbenzene-1,2-dithiolate(2-) and z = 1-, 0), show that both neutral complexes, [Mo(mdt)3] and [Mo(tbbdt)3], have similar electronic structures while the monoanions do not. Calculations reveal that the "Bailar twist" present in the crystal structure of [Mo(tbbdt)3](1-) (D3 symmetry) but not [Mo(mdt)3](1-) (D3h symmetry) is controlled by electronic factors which arise from bonding differences between the mdt and tbbdt ligands. In the former, configuration interaction between the Mo d(z(2)) and a deeper energy, occupied ligand orbital, which occurs in D3 symmetry, destabilizes the Mo d(z(2)) to above another ligand orbital which is half-occupied in the D3h [Mo(mdt)3](1-) complex. This leads to a metal d(1) configuration with no ligand holes (i.e., d(1)[L3](0h)) for [Mo(tbbdt)3](1-) rather than the metal d(2) configuration with one ligand hole (i.e., d(2)[L3](1h)) for [Mo(mdt)3](1-). Thus, the Bailar twist observed in some metal tris(dithiolene) complexes is the result of configuration interaction between metal and ligand orbitals and can be probed experimentally by S K-edge XAS.     

Photoelectron spectroscopy of the doubly-charged anions [MIVO(mnt)2]2- (M = Mo, W; mnt = S2C2(CN)2(2-): access to the ground and excited states of the [MVO(mnt)2]- anion

Photodetachment photoelectron spectroscopy was used to investigate the electronic structure of the doubly charged complexes [MIVO(mnt)2]2- (M = Mo, W; mnt = 1,2-dicyanoethenedithiolato). These dianions are stable in the gas phase and are minimal models for the active sites of the dimethyl sulfoxide reductase family of molybdenum enzymes and of related tungsten enzymes. Adiabatic and vertical electron binding energies for both species were measured, providing detailed information about molecular orbital energy levels of the parent dianions as well as the ground and excited states of the product anions [MVO(mnt)2]-. Density functional theory calculations were used to assist assignment of the detachment features. Differences in energy between these features provided the energies of ligand-to-metal charge-transfer transitions from S(pi) and S(sigma) molecular orbitals to the singly occupied metal-based orbital of the products [MVO(mnt)2]-. These unique data for the M(V) species were obtained at the C(2)(v)() geometry of the parent M(IV) dianions. However, theoretical calculations and available condensed phase data suggested that a geometry featuring differentially folded dithiolene ligands (Cs point symmetry) was slightly lower in energy. The driving force for ligand folding is a favorable covalent interaction between the singly occupied metal-based molecular orbital (a1 in C2v) point symmetry; highest occupied molecular orbital (HOMO)) and the least stable of the occupied sulfur-based molecular orbitals (b1 in C2v point symmetry, HOMO-1) that is only possible upon reduction to the lower symmetry. This ligand folding induces a large increase in the intensity predicted for the a' S(pi) --> a' dx2 - y2 charge-transfer transition originating from the HOMO-2 of [MVO(mnt)2](-) under Cs point symmetry. Electronic absorption spectra are available for the related species [MoVO(bdt)2]- (bdt = 1,2-benzenedithiolato) and for the oxidized form of dimethyl sulfoxide reductase. The intense absorptions at approximately 1.7 eV have been assigned previously to S(sigma) --> Mo transitions, assuming C2v geometry. The present work indicates that the alternative a' S(pi) --> a' dx2 - y2 of Cs geometry must be considered. Overall, this study confirms that the electronic structure of the M-dithiolene units are exquisitely sensitive to dithiolene ligand folding, reinforcing the proposal that these units are tunable conduits for electron transfer in enzyme systems.     

Photoelectron spectroscopy of doubly and singly charged group VIB dimetalate anions: M2O72-, MM'O72-, and M2O7- (M, M' = Cr, Mo, W)

We produced both doubly and singly charged Group VIB dimetalate species-M(2)O(7)(2-), MM'O(7)(2-), and M(2)O(7)(-) (M, M' = Cr, Mo, W)-using two different experimental techniques (electrospray ionization for the doubly charged anions and laser vaporization for the singly charged anions) and investigated their electronic and geometric structures using photoelectron spectroscopy and density functional calculations. Distinct changes in the electronic and geometric structures were observed as a function of the metal and charge state. The electron binding energies of the heteronuclear dianions MM'O(7)(2-) were observed to be roughly the average of those of their homonuclear counterparts (M(2)O(7)(2-) and M'(2)O(7)(2-)). Density functional calculations indicated that W(2)O(7)(2-), W(2)O(7)(-), and W(2)O(7) possess different ground-state structures: the dianion is highly symmetric (D(3d),(1)A(1g)) with a single bridging oxo ligand, the monoanion is a doublet (C(1), (2)A) with two bridging oxo ligands and a radical terminal oxo ligand, whereas the neutral is a singlet (C(1), (1)A) with two bridging oxo ligands and a terminal peroxo ligand. The combined experimental and theoretical study provides insights into the evolution of geometric and electronic structures as a function of charge state. The clusters identified might provide insights into the possible structures of reactive species present in early transition-metal oxide catalysts that are relevant to their reactivity and catalytic function.     

Spectroscopic and electronic structure studies of a dimethyl sulfoxide reductase catalytic intermediate: implications for electron- and atom-transfer reactivity

The electronic structure of a genuine paramagnetic des-oxo Mo(V) catalytic intermediate in the reaction of dimethyl sulfoxide reductase (DMSOR) with (CH(3))(3)NO has been probed by electron paramagnetic resonance (EPR), electronic absorption, and magnetic circular dichroism (MCD) spectroscopies. EPR spectroscopy reveals rhombic g- and A-tensors that indicate a low-symmetry geometry for this intermediate and a singly occupied molecular orbital that is dominantly metal centered. The excited-state spectroscopic data were interpreted in the context of electronic structure calculations, and this has resulted in a full assignment of the observed MCD and electronic absorption bands, a detailed understanding of the metal-ligand bonding scheme, and an evaluation of the Mo(V) coordination geometry and Mo(V)-S(dithiolene) covalency as it pertains to the stability of the intermediate and electron-transfer regeneration. Finally, the relationship between des-oxo Mo(V) and des-oxo Mo(IV) geometric and electronic structures is discussed relative to the reaction coordinate in members of the DMSOR enzyme family.